diff options
| author | Anton Vorontsov <avorontsov@ru.mvista.com> | 2009-08-19 03:38:18 +0400 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2009-08-25 09:43:58 -0500 |
| commit | ec80fb2d89a0a93db46bdc968b6a849be5340531 (patch) | |
| tree | f864028805e8aa629cb2a5e1e5dcfe9649fc587e | |
| parent | c9c419773d2a84af8ff2f91c859d3d16592c947b (diff) | |
powerpc/85xx: Add eSDHC support for MPC8536DS boards
This patch simply adds sdhci node to the device tree.
We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8536ds.dts | 8 | ||||
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8536ds_36b.dts | 8 |
2 files changed, 16 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 22caf69e6efd..815cebb2e3e5 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -250,6 +250,14 @@ phy_type = "ulpi"; }; + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + serial0: serial@4500 { cell-index = <0>; device_type = "serial"; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index 113ed8b7c898..d95b26021e62 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -250,6 +250,14 @@ phy_type = "ulpi"; }; + sdhci@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + clock-frequency = <250000000>; + }; + serial0: serial@4500 { cell-index = <0>; device_type = "serial"; |