diff options
author | David S. Miller <davem@davemloft.net> | 2020-03-09 20:13:16 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-03-09 20:13:16 -0700 |
commit | e442cfc76833e9c97cbc0dd2c6823c09e32cb68e (patch) | |
tree | 4db8aadb20e33fa81a0417672d56d7bc458b57f1 | |
parent | 6c9ee3069380d2dd98fbb410616d776c172ee64f (diff) | |
parent | f213bbe8a9d6ba1d0adf424787c02f361ea78c38 (diff) |
Merge branch 'net-Add-support-for-Synopsys-DesignWare-XPCS'
Jose Abreu says:
====================
net: Add support for Synopsys DesignWare XPCS
This adds support for Synopsys DesignWare XPCS in net subsystem and
integrates it into stmmac.
At 1/8, we start by removing the limitation of stmmac selftests that needed
a PHY to pass all the tests.
Then at 2/8 we use some helpers in stmmac so that some code can be
simplified.
At 3/8, we fallback to dev_fwnode() so that PCI based setups wich may
not have CONFIG_OF can still use FW node.
At 4/8, we adapt stmmac to the new PHYLINK changes as suggested by Russell
King.
We proceed by doing changes in PHYLINK in order to support XPCS: At 5/8 we
add some missing speeds that USXGMII supports and at 6/8 we check if
Autoneg is supported after initial parameters are validated.
Support for XPCS is finally introduced at 7/8, along with the usage of it
in stmmac driver at 8/8.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/common.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/hwif.h | 12 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 96 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 27 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 2 | ||||
-rw-r--r-- | drivers/net/phy/Kconfig | 6 | ||||
-rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/phy/mdio-xpcs.c | 612 | ||||
-rw-r--r-- | drivers/net/phy/phylink.c | 5 | ||||
-rw-r--r-- | include/linux/mdio-xpcs.h | 41 | ||||
-rw-r--r-- | include/linux/stmmac.h | 1 |
13 files changed, 771 insertions, 43 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e8666f980a21..6918c3f0ff1c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16117,6 +16117,13 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/synopsys/ +SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER +M: Jose Abreu <Jose.Abreu@synopsys.com> +L: netdev@vger.kernel.org +S: Supported +F: drivers/net/phy/mdio-xpcs.c +F: include/linux/mdio-xpcs.h + SYNOPSYS DESIGNWARE I2C DRIVER M: Jarkko Nikula <jarkko.nikula@linux.intel.com> R: Andy Shevchenko <andriy.shevchenko@linux.intel.com> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 338e25a6374e..9ad927f646e8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -3,6 +3,7 @@ config STMMAC_ETH tristate "STMicroelectronics Multi-Gigabit Ethernet driver" depends on HAS_IOMEM && HAS_DMA select MII + select MDIO_XPCS select PAGE_POOL select PHYLINK select CRC32 diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 487099092693..9bdbf589d93f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -15,6 +15,7 @@ #include <linux/netdevice.h> #include <linux/stmmac.h> #include <linux/phy.h> +#include <linux/mdio-xpcs.h> #include <linux/module.h> #if IS_ENABLED(CONFIG_VLAN_8021Q) #define STMMAC_VLAN_TAG_USED @@ -446,6 +447,8 @@ struct mac_device_info { const struct stmmac_hwtimestamp *ptp; const struct stmmac_tc_ops *tc; const struct stmmac_mmc_ops *mmc; + const struct mdio_xpcs_ops *xpcs; + struct mdio_xpcs_args xpcs_args; struct mii_regs mii; /* MII register Addresses */ struct mac_link link; void __iomem *pcsr; /* vpointer to device CSRs */ diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index df63b0367aff..c71dd99c8abf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -577,6 +577,18 @@ struct stmmac_mmc_ops { #define stmmac_mmc_read(__priv, __args...) \ stmmac_do_void_callback(__priv, mmc, read, __args) +/* XPCS callbacks */ +#define stmmac_xpcs_validate(__priv, __args...) \ + stmmac_do_callback(__priv, xpcs, validate, __args) +#define stmmac_xpcs_config(__priv, __args...) \ + stmmac_do_callback(__priv, xpcs, config, __args) +#define stmmac_xpcs_get_state(__priv, __args...) \ + stmmac_do_callback(__priv, xpcs, get_state, __args) +#define stmmac_xpcs_link_up(__priv, __args...) \ + stmmac_do_callback(__priv, xpcs, link_up, __args) +#define stmmac_xpcs_probe(__priv, __args...) \ + stmmac_do_callback(__priv, xpcs, probe, __args) + struct stmmac_regs_off { u32 ptp_off; u32 mmc_off; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index cb7a5bad4cfe..f26699d9a050 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -858,33 +858,65 @@ static void stmmac_validate(struct phylink_config *config, phylink_set(mask, 1000baseT_Half); } - bitmap_and(supported, supported, mac_supported, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_andnot(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mac_supported, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_andnot(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_and(supported, supported, mac_supported); + linkmode_andnot(supported, supported, mask); + + linkmode_and(state->advertising, state->advertising, mac_supported); + linkmode_andnot(state->advertising, state->advertising, mask); + + /* If PCS is supported, check which modes it supports. */ + stmmac_xpcs_validate(priv, &priv->hw->xpcs_args, supported, state); } static void stmmac_mac_pcs_get_state(struct phylink_config *config, struct phylink_link_state *state) { + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); + state->link = 0; + stmmac_xpcs_get_state(priv, &priv->hw->xpcs_args, state); } static void stmmac_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); + + stmmac_xpcs_config(priv, &priv->hw->xpcs_args, state); +} + +static void stmmac_mac_an_restart(struct phylink_config *config) +{ + /* Not Supported */ +} + +static void stmmac_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) +{ + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); + + stmmac_mac_set(priv, priv->ioaddr, false); + priv->eee_active = false; + stmmac_eee_init(priv); + stmmac_set_eee_pls(priv, priv->hw, false); +} + +static void stmmac_mac_link_up(struct phylink_config *config, + struct phy_device *phy, + unsigned int mode, phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); u32 ctrl; + stmmac_xpcs_link_up(priv, &priv->hw->xpcs_args, speed, interface); + ctrl = readl(priv->ioaddr + MAC_CTRL_REG); ctrl &= ~priv->hw->link.speed_mask; - if (state->interface == PHY_INTERFACE_MODE_USXGMII) { - switch (state->speed) { + if (interface == PHY_INTERFACE_MODE_USXGMII) { + switch (speed) { case SPEED_10000: ctrl |= priv->hw->link.xgmii.speed10000; break; @@ -898,7 +930,7 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode, return; } } else { - switch (state->speed) { + switch (speed) { case SPEED_2500: ctrl |= priv->hw->link.speed2500; break; @@ -916,46 +948,21 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode, } } - priv->speed = state->speed; + priv->speed = speed; if (priv->plat->fix_mac_speed) - priv->plat->fix_mac_speed(priv->plat->bsp_priv, state->speed); + priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed); - if (!state->duplex) + if (!duplex) ctrl &= ~priv->hw->link.duplex; else ctrl |= priv->hw->link.duplex; /* Flow Control operation */ - if (state->pause) - stmmac_mac_flow_ctrl(priv, state->duplex); + if (tx_pause && rx_pause) + stmmac_mac_flow_ctrl(priv, duplex); writel(ctrl, priv->ioaddr + MAC_CTRL_REG); -} - -static void stmmac_mac_an_restart(struct phylink_config *config) -{ - /* Not Supported */ -} - -static void stmmac_mac_link_down(struct phylink_config *config, - unsigned int mode, phy_interface_t interface) -{ - struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); - - stmmac_mac_set(priv, priv->ioaddr, false); - priv->eee_active = false; - stmmac_eee_init(priv); - stmmac_set_eee_pls(priv, priv->hw, false); -} - -static void stmmac_mac_link_up(struct phylink_config *config, - struct phy_device *phy, - unsigned int mode, phy_interface_t interface, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); stmmac_mac_set(priv, priv->ioaddr, true); if (phy && priv->dma_cap.eee) { @@ -1045,6 +1052,10 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) priv->phylink_config.dev = &priv->dev->dev; priv->phylink_config.type = PHYLINK_NETDEV; + priv->phylink_config.pcs_poll = true; + + if (!fwnode) + fwnode = dev_fwnode(priv->device); phylink = phylink_create(&priv->phylink_config, fwnode, mode, &stmmac_phylink_mac_ops); @@ -2689,7 +2700,8 @@ static int stmmac_open(struct net_device *dev) int ret; if (priv->hw->pcs != STMMAC_PCS_TBI && - priv->hw->pcs != STMMAC_PCS_RTBI) { + priv->hw->pcs != STMMAC_PCS_RTBI && + priv->hw->xpcs == NULL) { ret = stmmac_init_phy(dev); if (ret) { netdev_err(priv->dev, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index cfe5d8b73142..b2a707e2ef43 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -382,6 +382,14 @@ int stmmac_mdio_register(struct net_device *ndev) max_addr = PHY_MAX_ADDR; } + if (mdio_bus_data->has_xpcs) { + priv->hw->xpcs = mdio_xpcs_get_ops(); + if (!priv->hw->xpcs) { + err = -ENODEV; + goto bus_register_fail; + } + } + if (mdio_bus_data->needs_reset) new_bus->reset = &stmmac_mdio_reset; @@ -433,6 +441,25 @@ int stmmac_mdio_register(struct net_device *ndev) found = 1; } + /* Try to probe the XPCS by scanning all addresses. */ + if (priv->hw->xpcs) { + struct mdio_xpcs_args *xpcs = &priv->hw->xpcs_args; + int ret, mode = priv->plat->phy_interface; + max_addr = PHY_MAX_ADDR; + + xpcs->bus = new_bus; + + for (addr = 0; addr < max_addr; addr++) { + xpcs->addr = addr; + + ret = stmmac_xpcs_probe(priv, xpcs, mode); + if (!ret) { + found = 1; + break; + } + } + } + if (!found && !mdio_node) { dev_warn(dev, "No PHY found\n"); mdiobus_unregister(new_bus); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index 2aba2673d6c3..586a657be984 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -380,7 +380,7 @@ static int stmmac_test_phy_loopback(struct stmmac_priv *priv) int ret; if (!priv->dev->phydev) - return -EBUSY; + return -EOPNOTSUPP; ret = phy_loopback(priv->dev->phydev, true); if (ret) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d6f197e06134..cc7f1df855da 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -214,6 +214,12 @@ config MDIO_XGENE This module provides a driver for the MDIO busses found in the APM X-Gene SoC's. +config MDIO_XPCS + tristate "Synopsys DesignWare XPCS controller" + help + This module provides helper functions for Synopsys DesignWare XPCS + controllers. + endif endif diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index d9b3c0fec8e3..26f8039f300f 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o +obj-$(CONFIG_MDIO_XPCS) += mdio-xpcs.o obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o diff --git a/drivers/net/phy/mdio-xpcs.c b/drivers/net/phy/mdio-xpcs.c new file mode 100644 index 000000000000..973f588146f7 --- /dev/null +++ b/drivers/net/phy/mdio-xpcs.c @@ -0,0 +1,612 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates. + * Synopsys DesignWare XPCS helpers + * + * Author: Jose Abreu <Jose.Abreu@synopsys.com> + */ + +#include <linux/delay.h> +#include <linux/mdio.h> +#include <linux/mdio-xpcs.h> +#include <linux/phylink.h> +#include <linux/workqueue.h> + +#define SYNOPSYS_XPCS_USXGMII_ID 0x7996ced0 +#define SYNOPSYS_XPCS_10GKR_ID 0x7996ced0 +#define SYNOPSYS_XPCS_MASK 0xffffffff + +/* Vendor regs access */ +#define DW_VENDOR BIT(15) + +/* VR_XS_PCS */ +#define DW_USXGMII_RST BIT(10) +#define DW_USXGMII_EN BIT(9) +#define DW_VR_XS_PCS_DIG_STS 0x0010 +#define DW_RXFIFO_ERR GENMASK(6, 5) + +/* SR_MII */ +#define DW_USXGMII_FULL BIT(8) +#define DW_USXGMII_SS_MASK (BIT(13) | BIT(6) | BIT(5)) +#define DW_USXGMII_10000 (BIT(13) | BIT(6)) +#define DW_USXGMII_5000 (BIT(13) | BIT(5)) +#define DW_USXGMII_2500 (BIT(5)) +#define DW_USXGMII_1000 (BIT(6)) +#define DW_USXGMII_100 (BIT(13)) +#define DW_USXGMII_10 (0) + +/* SR_AN */ +#define DW_SR_AN_ADV1 0x10 +#define DW_SR_AN_ADV2 0x11 +#define DW_SR_AN_ADV3 0x12 +#define DW_SR_AN_LP_ABL1 0x13 +#define DW_SR_AN_LP_ABL2 0x14 +#define DW_SR_AN_LP_ABL3 0x15 + +/* Clause 73 Defines */ +/* AN_LP_ABL1 */ +#define DW_C73_PAUSE BIT(10) +#define DW_C73_ASYM_PAUSE BIT(11) +#define DW_C73_AN_ADV_SF 0x1 +/* AN_LP_ABL2 */ +#define DW_C73_1000KX BIT(5) +#define DW_C73_10000KX4 BIT(6) +#define DW_C73_10000KR BIT(7) +/* AN_LP_ABL3 */ +#define DW_C73_2500KX BIT(0) +#define DW_C73_5000KR BIT(1) + +static const int xpcs_usxgmii_features[] = { + ETHTOOL_LINK_MODE_Pause_BIT, + ETHTOOL_LINK_MODE_Asym_Pause_BIT, + ETHTOOL_LINK_MODE_Autoneg_BIT, + ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, + ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + ETHTOOL_LINK_MODE_2500baseX_Full_BIT, + __ETHTOOL_LINK_MODE_MASK_NBITS, +}; + +static const int xpcs_10gkr_features[] = { + ETHTOOL_LINK_MODE_Pause_BIT, + ETHTOOL_LINK_MODE_Asym_Pause_BIT, + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + __ETHTOOL_LINK_MODE_MASK_NBITS, +}; + +static const phy_interface_t xpcs_usxgmii_interfaces[] = { + PHY_INTERFACE_MODE_USXGMII, + PHY_INTERFACE_MODE_MAX, +}; + +static const phy_interface_t xpcs_10gkr_interfaces[] = { + PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_MAX, +}; + +static struct xpcs_id { + u32 id; + u32 mask; + const int *supported; + const phy_interface_t *interface; +} xpcs_id_list[] = { + { + .id = SYNOPSYS_XPCS_USXGMII_ID, + .mask = SYNOPSYS_XPCS_MASK, + .supported = xpcs_usxgmii_features, + .interface = xpcs_usxgmii_interfaces, + }, { + .id = SYNOPSYS_XPCS_10GKR_ID, + .mask = SYNOPSYS_XPCS_MASK, + .supported = xpcs_10gkr_features, + .interface = xpcs_10gkr_interfaces, + }, +}; + +static int xpcs_read(struct mdio_xpcs_args *xpcs, int dev, u32 reg) +{ + u32 reg_addr = MII_ADDR_C45 | dev << 16 | reg; + + return mdiobus_read(xpcs->bus, xpcs->addr, reg_addr); +} + +static int xpcs_write(struct mdio_xpcs_args *xpcs, int dev, u32 reg, u16 val) +{ + u32 reg_addr = MII_ADDR_C45 | dev << 16 | reg; + + return mdiobus_write(xpcs->bus, xpcs->addr, reg_addr, val); +} + +static int xpcs_read_vendor(struct mdio_xpcs_args *xpcs, int dev, u32 reg) +{ + return xpcs_read(xpcs, dev, DW_VENDOR | reg); +} + +static int xpcs_write_vendor(struct mdio_xpcs_args *xpcs, int dev, int reg, + u16 val) +{ + return xpcs_write(xpcs, dev, DW_VENDOR | reg, val); +} + +static int xpcs_read_vpcs(struct mdio_xpcs_args *xpcs, int reg) +{ + return xpcs_read_vendor(xpcs, MDIO_MMD_PCS, reg); +} + +static int xpcs_write_vpcs(struct mdio_xpcs_args *xpcs, int reg, u16 val) +{ + return xpcs_write_vendor(xpcs, MDIO_MMD_PCS, reg, val); +} + +static int xpcs_poll_reset(struct mdio_xpcs_args *xpcs, int dev) +{ + /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ + unsigned int retries = 12; + int ret; + + do { + msleep(50); + ret = xpcs_read(xpcs, dev, MDIO_CTRL1); + if (ret < 0) + return ret; + } while (ret & MDIO_CTRL1_RESET && --retries); + + return (ret & MDIO_CTRL1_RESET) ? -ETIMEDOUT : 0; +} + +static int xpcs_soft_reset(struct mdio_xpcs_args *xpcs, int dev) +{ + int ret; + + ret = xpcs_write(xpcs, dev, MDIO_CTRL1, MDIO_CTRL1_RESET); + if (ret < 0) + return ret; + + return xpcs_poll_reset(xpcs, dev); +} + +#define xpcs_warn(__xpcs, __state, __args...) \ +({ \ + if ((__state)->link) \ + dev_warn(&(__xpcs)->bus->dev, ##__args); \ +}) + +static int xpcs_read_fault(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + int ret; + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1); + if (ret < 0) + return ret; + + if (ret & MDIO_STAT1_FAULT) { + xpcs_warn(xpcs, state, "Link fault condition detected!\n"); + return -EFAULT; + } + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT2); + if (ret < 0) + return ret; + + if (ret & MDIO_STAT2_RXFAULT) + xpcs_warn(xpcs, state, "Receiver fault detected!\n"); + if (ret & MDIO_STAT2_TXFAULT) + xpcs_warn(xpcs, state, "Transmitter fault detected!\n"); + + ret = xpcs_read_vendor(xpcs, MDIO_MMD_PCS, DW_VR_XS_PCS_DIG_STS); + if (ret < 0) + return ret; + + if (ret & DW_RXFIFO_ERR) { + xpcs_warn(xpcs, state, "FIFO fault condition detected!\n"); + return -EFAULT; + } + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1); + if (ret < 0) + return ret; + + if (!(ret & MDIO_PCS_10GBRT_STAT1_BLKLK)) + xpcs_warn(xpcs, state, "Link is not locked!\n"); + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT2); + if (ret < 0) + return ret; + + if (ret & MDIO_PCS_10GBRT_STAT2_ERR) + xpcs_warn(xpcs, state, "Link has errors!\n"); + + return 0; +} + +static int xpcs_read_link(struct mdio_xpcs_args *xpcs, bool an) +{ + bool link = true; + int ret; + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1); + if (ret < 0) + return ret; + + if (!(ret & MDIO_STAT1_LSTATUS)) + link = false; + + if (an) { + ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); + if (ret < 0) + return ret; + + if (!(ret & MDIO_STAT1_LSTATUS)) + link = false; + } + + return link; +} + +static int xpcs_get_max_usxgmii_speed(const unsigned long *supported) +{ + int max = SPEED_UNKNOWN; + + if (phylink_test(supported, 1000baseKX_Full)) + max = SPEED_1000; + if (phylink_test(supported, 2500baseX_Full)) + max = SPEED_2500; + if (phylink_test(supported, 10000baseKX4_Full)) + max = SPEED_10000; + if (phylink_test(supported, 10000baseKR_Full)) + max = SPEED_10000; + + return max; +} + +static int xpcs_config_usxgmii(struct mdio_xpcs_args *xpcs, int speed) +{ + int ret, speed_sel; + + switch (speed) { + case SPEED_10: + speed_sel = DW_USXGMII_10; + break; + case SPEED_100: + speed_sel = DW_USXGMII_100; + break; + case SPEED_1000: + speed_sel = DW_USXGMII_1000; + break; + case SPEED_2500: + speed_sel = DW_USXGMII_2500; + break; + case SPEED_5000: + speed_sel = DW_USXGMII_5000; + break; + case SPEED_10000: + speed_sel = DW_USXGMII_10000; + break; + default: + /* Nothing to do here */ + return -EINVAL; + } + + ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_EN); + if (ret < 0) + return ret; + + ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret &= ~DW_USXGMII_SS_MASK; + ret |= speed_sel | DW_USXGMII_FULL; + + ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret); + if (ret < 0) + return ret; + + ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1); + if (ret < 0) + return ret; + + return xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_RST); +} + +static int xpcs_config_aneg_c73(struct mdio_xpcs_args *xpcs) +{ + int ret, adv; + + /* By default, in USXGMII mode XPCS operates at 10G baud and + * replicates data to achieve lower speeds. Hereby, in this + * default configuration we need to advertise all supported + * modes and not only the ones we want to use. + */ + + /* SR_AN_ADV3 */ + adv = 0; + if (phylink_test(xpcs->supported, 2500baseX_Full)) + adv |= DW_C73_2500KX; + + /* TODO: 5000baseKR */ + + ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV3, adv); + if (ret < 0) + return ret; + + /* SR_AN_ADV2 */ + adv = 0; + if (phylink_test(xpcs->supported, 1000baseKX_Full)) + adv |= DW_C73_1000KX; + if (phylink_test(xpcs->supported, 10000baseKX4_Full)) + adv |= DW_C73_10000KX4; + if (phylink_test(xpcs->supported, 10000baseKR_Full)) + adv |= DW_C73_10000KR; + + ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV2, adv); + if (ret < 0) + return ret; + + /* SR_AN_ADV1 */ + adv = DW_C73_AN_ADV_SF; + if (phylink_test(xpcs->supported, Pause)) + adv |= DW_C73_PAUSE; + if (phylink_test(xpcs->supported, Asym_Pause)) + adv |= DW_C73_ASYM_PAUSE; + + return xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV1, adv); +} + +static int xpcs_config_aneg(struct mdio_xpcs_args *xpcs) +{ + int ret; + + ret = xpcs_config_aneg_c73(xpcs); + if (ret < 0) + return ret; + + ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_CTRL1); + if (ret < 0) + return ret; + + ret |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART; + + return xpcs_write(xpcs, MDIO_MMD_AN, MDIO_CTRL1, ret); +} + +static int xpcs_aneg_done(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + int ret; + + ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); + if (ret < 0) + return ret; + + if (ret & MDIO_AN_STAT1_COMPLETE) { + ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1); + if (ret < 0) + return ret; + + /* Check if Aneg outcome is valid */ + if (!(ret & DW_C73_AN_ADV_SF)) + return 0; + + return 1; + } + + return 0; +} + +static int xpcs_read_lpa(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + int ret; + + ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1); + if (ret < 0) + return ret; + + if (!(ret & MDIO_AN_STAT1_LPABLE)) { + phylink_clear(state->lp_advertising, Autoneg); + return 0; + } + + phylink_set(state->lp_advertising, Autoneg); + + /* Clause 73 outcome */ + ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL3); + if (ret < 0) + return ret; + + if (ret & DW_C73_2500KX) + phylink_set(state->lp_advertising, 2500baseX_Full); + + ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL2); + if (ret < 0) + return ret; + + if (ret & DW_C73_1000KX) + phylink_set(state->lp_advertising, 1000baseKX_Full); + if (ret & DW_C73_10000KX4) + phylink_set(state->lp_advertising, 10000baseKX4_Full); + if (ret & DW_C73_10000KR) + phylink_set(state->lp_advertising, 10000baseKR_Full); + + ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1); + if (ret < 0) + return ret; + + if (ret & DW_C73_PAUSE) + phylink_set(state->lp_advertising, Pause); + if (ret & DW_C73_ASYM_PAUSE) + phylink_set(state->lp_advertising, Asym_Pause); + + linkmode_and(state->lp_advertising, state->lp_advertising, + state->advertising); + return 0; +} + +static void xpcs_resolve_lpa(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + int max_speed = xpcs_get_max_usxgmii_speed(state->lp_advertising); + + state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX; + state->speed = max_speed; + state->duplex = DUPLEX_FULL; +} + +static void xpcs_resolve_pma(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX; + state->duplex = DUPLEX_FULL; + + switch (state->interface) { + case PHY_INTERFACE_MODE_10GKR: + state->speed = SPEED_10000; + break; + default: + state->speed = SPEED_UNKNOWN; + break; + } +} + +static int xpcs_validate(struct mdio_xpcs_args *xpcs, + unsigned long *supported, + struct phylink_link_state *state) +{ + linkmode_and(supported, supported, xpcs->supported); + linkmode_and(state->advertising, state->advertising, xpcs->supported); + return 0; +} + +static int xpcs_config(struct mdio_xpcs_args *xpcs, + const struct phylink_link_state *state) +{ + int ret; + + if (state->an_enabled) { + ret = xpcs_config_aneg(xpcs); + if (ret) + return ret; + } + + return 0; +} + +static int xpcs_get_state(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state) +{ + int ret; + + /* Link needs to be read first ... */ + state->link = xpcs_read_link(xpcs, state->an_enabled) > 0 ? 1 : 0; + + /* ... and then we check the faults. */ + ret = xpcs_read_fault(xpcs, state); + if (ret) { + ret = xpcs_soft_reset(xpcs, MDIO_MMD_PCS); + if (ret) + return ret; + + state->link = 0; + + return xpcs_config(xpcs, state); + } + + if (state->link && state->an_enabled && xpcs_aneg_done(xpcs, state)) { + state->an_complete = true; + xpcs_read_lpa(xpcs, state); + xpcs_resolve_lpa(xpcs, state); + } else if (state->link) { + xpcs_resolve_pma(xpcs, state); + } + + return 0; +} + +static int xpcs_link_up(struct mdio_xpcs_args *xpcs, int speed, + phy_interface_t interface) +{ + if (interface == PHY_INTERFACE_MODE_USXGMII) + return xpcs_config_usxgmii(xpcs, speed); + + return 0; +} + +static u32 xpcs_get_id(struct mdio_xpcs_args *xpcs) +{ + int ret; + u32 id; + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID1); + if (ret < 0) + return 0xffffffff; + + id = ret << 16; + + ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID2); + if (ret < 0) + return 0xffffffff; + + return id | ret; +} + +static bool xpcs_check_features(struct mdio_xpcs_args *xpcs, + struct xpcs_id *match, + phy_interface_t interface) +{ + int i; + + for (i = 0; match->interface[i] != PHY_INTERFACE_MODE_MAX; i++) { + if (match->interface[i] == interface) + break; + } + + if (match->interface[i] == PHY_INTERFACE_MODE_MAX) + return false; + + for (i = 0; match->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++) + set_bit(match->supported[i], xpcs->supported); + + return true; +} + +static int xpcs_probe(struct mdio_xpcs_args *xpcs, phy_interface_t interface) +{ + u32 xpcs_id = xpcs_get_id(xpcs); + struct xpcs_id *match = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(xpcs_id_list); i++) { + struct xpcs_id *entry = &xpcs_id_list[i]; + + if ((xpcs_id & entry->mask) == entry->id) { + match = entry; + + if (xpcs_check_features(xpcs, match, interface)) + return 0; + } + } + + return -ENODEV; +} + +static struct mdio_xpcs_ops xpcs_ops = { + .validate = xpcs_validate, + .config = xpcs_config, + .get_state = xpcs_get_state, + .link_up = xpcs_link_up, + .probe = xpcs_probe, +}; + +struct mdio_xpcs_ops *mdio_xpcs_get_ops(void) +{ + return &xpcs_ops; +} +EXPORT_SYMBOL_GPL(mdio_xpcs_get_ops); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index b4367fab7899..19db68d74cb4 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -312,11 +312,13 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) phylink_set(pl->supported, 1000baseT_Half); phylink_set(pl->supported, 1000baseT_Full); phylink_set(pl->supported, 1000baseX_Full); + phylink_set(pl->supported, 1000baseKX_Full); phylink_set(pl->supported, 2500baseT_Full); phylink_set(pl->supported, 2500baseX_Full); phylink_set(pl->supported, 5000baseT_Full); phylink_set(pl->supported, 10000baseT_Full); phylink_set(pl->supported, 10000baseKR_Full); + phylink_set(pl->supported, 10000baseKX4_Full); phylink_set(pl->supported, 10000baseCR_Full); phylink_set(pl->supported, 10000baseSR_Full); phylink_set(pl->supported, 10000baseLR_Full); @@ -338,6 +340,9 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) "failed to validate link configuration for in-band status\n"); return -EINVAL; } + + /* Check if MAC/PCS also supports Autoneg. */ + pl->link_config.an_enabled = phylink_test(pl->supported, Autoneg); } return 0; diff --git a/include/linux/mdio-xpcs.h b/include/linux/mdio-xpcs.h new file mode 100644 index 000000000000..9a841aa5982d --- /dev/null +++ b/include/linux/mdio-xpcs.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates. + * Synopsys DesignWare XPCS helpers + */ + +#ifndef __LINUX_MDIO_XPCS_H +#define __LINUX_MDIO_XPCS_H + +#include <linux/phy.h> +#include <linux/phylink.h> + +struct mdio_xpcs_args { + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + struct mii_bus *bus; + int addr; +}; + +struct mdio_xpcs_ops { + int (*validate)(struct mdio_xpcs_args *xpcs, + unsigned long *supported, + struct phylink_link_state *state); + int (*config)(struct mdio_xpcs_args *xpcs, + const struct phylink_link_state *state); + int (*get_state)(struct mdio_xpcs_args *xpcs, + struct phylink_link_state *state); + int (*link_up)(struct mdio_xpcs_args *xpcs, int speed, + phy_interface_t interface); + int (*probe)(struct mdio_xpcs_args *xpcs, phy_interface_t interface); +}; + +#if IS_ENABLED(CONFIG_MDIO_XPCS) +struct mdio_xpcs_ops *mdio_xpcs_get_ops(void); +#else +static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void) +{ + return NULL; +} +#endif + +#endif /* __LINUX_MDIO_XPCS_H */ diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 19190c609282..fbafb353e9be 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -80,6 +80,7 @@ struct stmmac_mdio_bus_data { unsigned int phy_mask; + unsigned int has_xpcs; int *irqs; int probed_phy_irq; bool needs_reset; |