summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMichal Nazarewicz <m.nazarewicz@samsung.com>2009-11-09 14:15:23 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2009-12-11 11:55:22 -0800
commitd26a6aa08b9f12b44fb1ee65625e7480d3d5bb81 (patch)
tree9c86cc33a03c6ea0f9f7e6d2453b84b973e936fa
parente8b6f8c5aa001235423878ef70bda919652e10be (diff)
USB: g_mass_storage: code cleaned up and comments updated
Fixed most of the errors and warnings in f_mass_storage.c and storage_common.c reported by checkpatch.pl as well as updated comments. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/gadget/f_mass_storage.c567
-rw-r--r--drivers/usb/gadget/mass_storage.c6
-rw-r--r--drivers/usb/gadget/storage_common.c108
3 files changed, 387 insertions, 294 deletions
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 837aab624a46..5eaf22db7fcc 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -1,7 +1,9 @@
/*
- * file_storage.c -- File-backed USB Storage Gadget, for USB development
+ * f_mass_storage.c -- Mass Storage USB Composite Function
*
* Copyright (C) 2003-2008 Alan Stern
+ * Copyright (C) 2009 Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -37,37 +39,112 @@
/*
- * The File-backed Storage Gadget acts as a USB Mass Storage device,
- * appearing to the host as a disk drive or as a CD-ROM drive. In addition
- * to providing an example of a genuinely useful gadget driver for a USB
- * device, it also illustrates a technique of double-buffering for increased
- * throughput. Last but not least, it gives an easy way to probe the
- * behavior of the Mass Storage drivers in a USB host.
+ * The Mass Storage Function acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive or as a CD-ROM drive. In
+ * addition to providing an example of a genuinely useful composite
+ * function for a USB device, it also illustrates a technique of
+ * double-buffering for increased throughput.
*
- * Backing storage is provided by a regular file or a block device, specified
- * by the "file" module parameter. Access can be limited to read-only by
- * setting the optional "ro" module parameter. (For CD-ROM emulation,
- * access is always read-only.) The gadget will indicate that it has
- * removable media if the optional "removable" module parameter is set.
+ * Function supports multiple logical units (LUNs). Backing storage
+ * for each LUN is provided by a regular file or a block device.
+ * Access for each LUN can be limited to read-only. Moreover, the
+ * function can indicate that LUN is removable and/or CD-ROM. (The
+ * later implies read-only access.)
+ *
+ * MSF is configured by specifying a fsg_config structure. It has the
+ * following fields:
+ *
+ * nluns Number of LUNs function have (anywhere from 1
+ * to FSG_MAX_LUNS which is 8).
+ * luns An array of LUN configuration values. This
+ * should be filled for each LUN that
+ * function will include (ie. for "nluns"
+ * LUNs). Each element of the array has
+ * the following fields:
+ * ->filename The path to the backing file for the LUN.
+ * Required if LUN is not marked as
+ * removable.
+ * ->ro Flag specifying access to the LUN shall be
+ * read-only. This is implied if CD-ROM
+ * emulation is enabled as well as when
+ * it was impossible to open "filename"
+ * in R/W mode.
+ * ->removable Flag specifying that LUN shall be indicated as
+ * being removable.
+ * ->cdrom Flag specifying that LUN shall be reported as
+ * being a CD-ROM.
+ *
+ * lun_name_format A printf-like format for names of the LUN
+ * devices. This determines how the
+ * directory in sysfs will be named.
+ * Unless you are using several MSFs in
+ * a single gadget (as opposed to single
+ * MSF in many configurations) you may
+ * leave it as NULL (in which case
+ * "lun%d" will be used). In the format
+ * you can use "%d" to index LUNs for
+ * MSF's with more than one LUN. (Beware
+ * that there is only one integer given
+ * as an argument for the format and
+ * specifying invalid format may cause
+ * unspecified behaviour.)
+ * thread_name Name of the kernel thread process used by the
+ * MSF. You can safely set it to NULL
+ * (in which case default "file-storage"
+ * will be used).
+ *
+ * vendor_name
+ * product_name
+ * release Information used as a reply to INQUIRY
+ * request. To use default set to NULL,
+ * NULL, 0xffff respectively. The first
+ * field should be 8 and the second 16
+ * characters or less.
+ *
+ * can_stall Set to permit function to halt bulk endpoints.
+ * Disabled on some USB devices known not
+ * to work correctly. You should set it
+ * to true.
+ *
+ * If "removable" is not set for a LUN then a backing file must be
+ * specified. If it is set, then NULL filename means the LUN's medium
+ * is not loaded (an empty string as "filename" in the fsg_config
+ * structure causes error). The CD-ROM emulation includes a single
+ * data track and no audio tracks; hence there need be only one
+ * backing file per LUN. Note also that the CD-ROM block length is
+ * set to 512 rather than the more common value 2048.
+ *
+ *
+ * MSF includes support for module parameters. If gadget using it
+ * decides to use it, the following module parameters will be
+ * available:
+ *
+ * file=filename[,filename...]
+ * Names of the files or block devices used for
+ * backing storage.
+ * ro=b[,b...] Default false, boolean for read-only access.
+ * removable=b[,b...]
+ * Default true, boolean for removable media.
+ * cdrom=b[,b...] Default false, boolean for whether to emulate
+ * a CD-ROM drive.
+ * luns=N Default N = number of filenames, number of
+ * LUNs to support.
+ * stall Default determined according to the type of
+ * USB device controller (usually true),
+ * boolean to permit the driver to halt
+ * bulk endpoints.
+ *
+ * The module parameters may be prefixed with some string. You need
+ * to consult gadget's documentation or source to verify whether it is
+ * using those module parameters and if it does what are the prefixes
+ * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is
+ * the prefix).
*
- * There is support for multiple logical units (LUNs), each of which has
- * its own backing file. The number of LUNs can be set using the optional
- * "luns" module parameter (anywhere from 1 to 8), and the corresponding
- * files are specified using comma-separated lists for "file" and "ro".
- * The default number of LUNs is taken from the number of "file" elements;
- * it is 1 if "file" is not given. If "removable" is not set then a backing
- * file must be specified for each LUN. If it is set, then an unspecified
- * or empty backing filename means the LUN's medium is not loaded. Ideally
- * each LUN would be settable independently as a disk drive or a CD-ROM
- * drive, but currently all LUNs have to be the same type. The CD-ROM
- * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN. Note also that the CD-ROM block
- * length is set to 512 rather than the more common value 2048.
*
* Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed (an interrupt-out endpoint is also needed for CBI). The memory
- * requirement amounts to two 16K buffers, size configurable by a parameter.
- * Support is included for both full-speed and high-speed operation.
+ * needed. The memory requirement amounts to two 16K buffers, size
+ * configurable by a parameter. Support is included for both
+ * full-speed and high-speed operation.
*
* Note that the driver is slightly non-portable in that it assumes a
* single memory/DMA buffer will be useable for bulk-in, bulk-out, and
@@ -75,39 +152,28 @@
* issue, but there may be some with hardware restrictions that prevent
* a buffer from being used by more than one endpoint.
*
- * Module options:
*
- * file=filename[,filename...]
- * Required if "removable" is not set, names of
- * the files or block devices used for
- * backing storage
- * ro=b[,b...] Default false, booleans for read-only access
- * removable Default false, boolean for removable media
- * luns=N Default N = number of filenames, number of
- * LUNs to support
- * stall Default determined according to the type of
- * USB device controller (usually true),
- * boolean to permit the driver to halt
- * bulk endpoints
- * cdrom Default false, boolean for whether to emulate
- * a CD-ROM drive
+ * The pathnames of the backing files and the ro settings are
+ * available in the attribute files "file" and "ro" in the lun<n> (or
+ * to be more precise in a directory which name comes from
+ * "lun_name_format" option!) subdirectory of the gadget's sysfs
+ * directory. If the "removable" option is set, writing to these
+ * files will simulate ejecting/loading the medium (writing an empty
+ * line means eject) and adjusting a write-enable tab. Changes to the
+ * ro setting are not allowed when the medium is loaded or if CD-ROM
+ * emulation is being used.
*
- * The pathnames of the backing files and the ro settings are available in
- * the attribute files "file" and "ro" in the lun<n> subdirectory of the
- * gadget's sysfs directory. If the "removable" option is set, writing to
- * these files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab. Changes to the ro
- * setting are not allowed when the medium is loaded or if CD-ROM emulation
- * is being used.
*
- * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
- * The driver's SCSI command interface was based on the "Information
- * technology - Small Computer System Interface - 2" document from
- * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
- * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception
- * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
- * "Universal Serial Bus Mass Storage Class UFI Command Specification"
- * document, Revision 1.0, December 14, 1998, available at
+ * This function is heavily based on "File-backed Storage Gadget" by
+ * Alan Stern which in turn is heavily based on "Gadget Zero" by David
+ * Brownell. The driver's SCSI command interface was based on the
+ * "Information technology - Small Computer System Interface - 2"
+ * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93,
+ * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.
+ * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which
+ * was based on the "Universal Serial Bus Mass Storage Class UFI
+ * Command Specification" document, Revision 1.0, December 14, 1998,
+ * available at
* <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
*/
@@ -115,7 +181,7 @@
/*
* Driver Design
*
- * The FSG driver is fairly straightforward. There is a main kernel
+ * The MSF is fairly straightforward. There is a main kernel
* thread that handles most of the work. Interrupt routines field
* callbacks from the controller driver: bulk- and interrupt-request
* completion notifications, endpoint-0 events, and disconnect events.
@@ -138,17 +204,11 @@
* an EXIT exception.
*
* In normal operation the main thread is started during the gadget's
- * fsg_bind() callback and stopped during fsg_unbind(). But it can also
- * exit when it receives a signal, and there's no point leaving the
- * gadget running when the thread is dead. So just before the thread
- * exits, it deregisters the gadget driver. This makes things a little
- * tricky: The driver is deregistered at two places, and the exiting
- * thread can indirectly call fsg_unbind() which in turn can tell the
- * thread to exit. The first problem is resolved through the use of the
- * REGISTERED atomic bitflag; the driver will only be deregistered once.
- * The second problem is resolved by having fsg_unbind() check
- * fsg->state; it won't try to stop the thread if the state is already
- * FSG_STATE_TERMINATED.
+ * fsg_bind() callback and stopped during fsg_unbind(). But it can
+ * also exit when it receives a signal, and there's no point leaving
+ * the gadget running when the thread is dead. At of this moment, MSF
+ * provides no way to deregister the gadget when thread dies -- maybe
+ * a callback functions is needed.
*
* To provide maximum throughput, the driver uses a circular pipeline of
* buffer heads (struct fsg_buffhd). In principle the pipeline can be
@@ -236,7 +296,7 @@
/*------------------------------------------------------------------------*/
#define FSG_DRIVER_DESC "Mass Storage Function"
-#define FSG_DRIVER_VERSION "20 November 2008"
+#define FSG_DRIVER_VERSION "2009/09/11"
static const char fsg_string_interface[] = "Mass Storage";
@@ -307,7 +367,7 @@ struct fsg_config {
struct fsg_dev {
struct usb_function function;
- struct usb_composite_dev*cdev;
+ struct usb_composite_dev *cdev;
struct usb_gadget *gadget; /* Copy of cdev->gadget */
struct fsg_common *common;
@@ -322,18 +382,18 @@ struct fsg_dev {
const char *ep0req_name;
unsigned int bulk_out_maxpacket;
- enum fsg_state state; // For exception handling
+ enum fsg_state state; /* For exception handling */
unsigned int exception_req_tag;
u8 config, new_config;
- unsigned int running : 1;
- unsigned int bulk_in_enabled : 1;
- unsigned int bulk_out_enabled : 1;
- unsigned int phase_error : 1;
- unsigned int short_packet_received : 1;
- unsigned int bad_lun_okay : 1;
- unsigned int can_stall : 1;
+ unsigned int running:1;
+ unsigned int bulk_in_enabled:1;
+ unsigned int bulk_out_enabled:1;
+ unsigned int phase_error:1;
+ unsigned int short_packet_received:1;
+ unsigned int bad_lun_okay:1;
+ unsigned int can_stall:1;
unsigned long atomic_bitflags;
#define REGISTERED 0
@@ -461,7 +521,7 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
if (req->status || req->actual != req->length)
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual, req->length);
- if (req->status == -ECONNRESET) // Request was cancelled
+ if (req->status == -ECONNRESET) /* Request was cancelled */
usb_ep_fifo_flush(ep);
/* Hold the lock while we update the request and buffer states */
@@ -483,7 +543,7 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual,
bh->bulk_out_intended_length);
- if (req->status == -ECONNRESET) // Request was cancelled
+ if (req->status == -ECONNRESET) /* Request was cancelled */
usb_ep_fifo_flush(ep);
/* Hold the lock while we update the request and buffer states */
@@ -643,7 +703,7 @@ static int do_read(struct fsg_dev *fsg)
/* Carry out the file reads */
amount_left = fsg->data_size_from_cmnd;
if (unlikely(amount_left == 0))
- return -EIO; // No default reply
+ return -EIO; /* No default reply */
for (;;) {
@@ -701,7 +761,7 @@ static int do_read(struct fsg_dev *fsg)
} else if (nread < amount) {
LDBG(curlun, "partial file read: %d/%u\n",
(int) nread, amount);
- nread -= (nread & 511); // Round down to a block
+ nread -= (nread & 511); /* Round down to a block */
}
file_offset += nread;
amount_left -= nread;
@@ -718,7 +778,7 @@ static int do_read(struct fsg_dev *fsg)
}
if (amount_left == 0)
- break; // No more left to read
+ break; /* No more left to read */
/* Send this buffer and go read some more */
bh->inreq->zero = 0;
@@ -727,7 +787,7 @@ static int do_read(struct fsg_dev *fsg)
fsg->common->next_buffhd_to_fill = bh->next;
}
- return -EIO; // No default reply
+ return -EIO; /* No default reply */
}
@@ -751,7 +811,7 @@ static int do_write(struct fsg_dev *fsg)
return -EINVAL;
}
spin_lock(&curlun->filp->f_lock);
- curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait
+ curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */
spin_unlock(&curlun->filp->f_lock);
/* Get the starting Logical Block Address and check that it's
@@ -769,7 +829,7 @@ static int do_write(struct fsg_dev *fsg)
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
- if (fsg->common->cmnd[1] & 0x08) { // FUA
+ if (fsg->common->cmnd[1] & 0x08) { /* FUA */
spin_lock(&curlun->filp->f_lock);
curlun->filp->f_flags |= O_SYNC;
spin_unlock(&curlun->filp->f_lock);
@@ -834,8 +894,8 @@ static int do_write(struct fsg_dev *fsg)
/* amount is always divisible by 512, hence by
* the bulk-out maxpacket size */
- bh->outreq->length = bh->bulk_out_intended_length =
- amount;
+ bh->outreq->length = amount;
+ bh->bulk_out_intended_length = amount;
bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
@@ -846,7 +906,7 @@ static int do_write(struct fsg_dev *fsg)
/* Write the received data to the backing file */
bh = fsg->common->next_buffhd_to_drain;
if (bh->state == BUF_STATE_EMPTY && !get_some_more)
- break; // We stopped early
+ break; /* We stopped early */
if (bh->state == BUF_STATE_FULL) {
smp_rmb();
fsg->common->next_buffhd_to_drain = bh->next;
@@ -878,7 +938,7 @@ static int do_write(struct fsg_dev *fsg)
(unsigned long long) file_offset,
(int) nwritten);
if (signal_pending(current))
- return -EINTR; // Interrupted!
+ return -EINTR; /* Interrupted! */
if (nwritten < 0) {
LDBG(curlun, "error in file write: %d\n",
@@ -888,7 +948,7 @@ static int do_write(struct fsg_dev *fsg)
LDBG(curlun, "partial file write: %d/%u\n",
(int) nwritten, amount);
nwritten -= (nwritten & 511);
- // Round down to a block
+ /* Round down to a block */
}
file_offset += nwritten;
amount_left_to_write -= nwritten;
@@ -916,7 +976,7 @@ static int do_write(struct fsg_dev *fsg)
return rc;
}
- return -EIO; // No default reply
+ return -EIO; /* No default reply */
}
@@ -976,7 +1036,7 @@ static int do_verify(struct fsg_dev *fsg)
verification_length = get_unaligned_be16(&fsg->common->cmnd[7]);
if (unlikely(verification_length == 0))
- return -EIO; // No default reply
+ return -EIO; /* No default reply */
/* Prepare to carry out the file verify */
amount_left = verification_length << 9;
@@ -1029,7 +1089,7 @@ static int do_verify(struct fsg_dev *fsg)
} else if (nread < amount) {
LDBG(curlun, "partial file verify: %d/%u\n",
(int) nread, amount);
- nread -= (nread & 511); // Round down to a sector
+ nread -= (nread & 511); /* Round down to a sector */
}
if (nread == 0) {
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
@@ -1054,17 +1114,17 @@ static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
if (!curlun) { /* Unsupported LUNs are okay */
fsg->bad_lun_okay = 1;
memset(buf, 0, 36);
- buf[0] = 0x7f; // Unsupported, no device-type
- buf[4] = 31; // Additional length
+ buf[0] = 0x7f; /* Unsupported, no device-type */
+ buf[4] = 31; /* Additional length */
return 36;
}
buf[0] = curlun->cdrom ? TYPE_CDROM : TYPE_DISK;
buf[1] = curlun->removable ? 0x80 : 0;
- buf[2] = 2; // ANSI SCSI level 2
- buf[3] = 2; // SCSI-2 INQUIRY data format
- buf[4] = 31; // Additional length
- buf[5] = 0; // No special options
+ buf[2] = 2; /* ANSI SCSI level 2 */
+ buf[3] = 2; /* SCSI-2 INQUIRY data format */
+ buf[4] = 31; /* Additional length */
+ buf[5] = 0; /* No special options */
buf[6] = 0;
buf[7] = 0;
memcpy(buf + 8, fsg->common->inquiry_string,
@@ -1102,7 +1162,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
}
#endif
- if (!curlun) { // Unsupported LUNs are okay
+ if (!curlun) { /* Unsupported LUNs are okay */
fsg->bad_lun_okay = 1;
sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
sdinfo = 0;
@@ -1117,10 +1177,10 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
}
memset(buf, 0, 18);
- buf[0] = valid | 0x70; // Valid, current error
+ buf[0] = valid | 0x70; /* Valid, current error */
buf[2] = SK(sd);
put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
- buf[7] = 18 - 8; // Additional sense length
+ buf[7] = 18 - 8; /* Additional sense length */
buf[12] = ASC(sd);
buf[13] = ASCQ(sd);
return 18;
@@ -1209,7 +1269,7 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
int valid_page = 0;
int len, limit;
- if ((fsg->common->cmnd[1] & ~0x08) != 0) { // Mask away DBD
+ if ((fsg->common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
@@ -1228,13 +1288,13 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
* the mode data length later. */
memset(buf, 0, 8);
if (mscmnd == SC_MODE_SENSE_6) {
- buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
+ buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
buf += 4;
limit = 255;
- } else { // SC_MODE_SENSE_10
- buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
+ } else { /* SC_MODE_SENSE_10 */
+ buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */
buf += 8;
- limit = 65535; // Should really be FSG_BUFLEN
+ limit = 65535; /* Should really be FSG_BUFLEN */
}
/* No block descriptors */
@@ -1243,14 +1303,14 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
* is the Caching page. */
if (page_code == 0x08 || all_pages) {
valid_page = 1;
- buf[0] = 0x08; // Page code
- buf[1] = 10; // Page length
- memset(buf+2, 0, 10); // None of the fields are changeable
+ buf[0] = 0x08; /* Page code */
+ buf[1] = 10; /* Page length */
+ memset(buf+2, 0, 10); /* None of the fields are changeable */
if (!changeable_values) {
- buf[2] = 0x04; // Write cache enable,
- // Read cache not disabled
- // No cache retention priorities
+ buf[2] = 0x04; /* Write cache enable, */
+ /* Read cache not disabled */
+ /* No cache retention priorities */
put_unaligned_be16(0xffff, &buf[4]);
/* Don't disable prefetch */
/* Minimum prefetch = 0 */
@@ -1304,7 +1364,7 @@ static int do_prevent_allow(struct fsg_dev *fsg)
}
prevent = fsg->common->cmnd[4] & 0x01;
- if ((fsg->common->cmnd[4] & ~0x01) != 0) { // Mask away Prevent
+ if ((fsg->common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */
curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
return -EINVAL;
}
@@ -1323,7 +1383,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
u8 *buf = (u8 *) bh->buf;
buf[0] = buf[1] = buf[2] = 0;
- buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
+ buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */
buf += 4;
put_unaligned_be32(curlun->num_sectors, &buf[0]);
@@ -1398,7 +1458,7 @@ static int pad_with_zeros(struct fsg_dev *fsg)
u32 nsend;
int rc;
- bh->state = BUF_STATE_EMPTY; // For the first iteration
+ bh->state = BUF_STATE_EMPTY; /* For the first iteration */
fsg->usb_amount_left = nkeep + fsg->residue;
while (fsg->usb_amount_left > 0) {
@@ -1454,8 +1514,8 @@ static int throw_away_data(struct fsg_dev *fsg)
/* amount is always divisible by 512, hence by
* the bulk-out maxpacket size */
- bh->outreq->length = bh->bulk_out_intended_length =
- amount;
+ bh->outreq->length = amount;
+ bh->bulk_out_intended_length = amount;
bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
@@ -1480,7 +1540,7 @@ static int finish_reply(struct fsg_dev *fsg)
switch (fsg->data_dir) {
case DATA_DIR_NONE:
- break; // Nothing to send
+ break; /* Nothing to send */
/* If we don't know whether the host wants to read or write,
* this must be CB or CBI with an unknown command. We mustn't
@@ -1522,14 +1582,13 @@ static int finish_reply(struct fsg_dev *fsg)
/* We have processed all we want from the data the host has sent.
* There may still be outstanding bulk-out requests. */
case DATA_DIR_FROM_HOST:
- if (fsg->residue == 0)
- ; // Nothing to receive
+ if (fsg->residue == 0) {
+ /* Nothing to receive */
/* Did the host stop sending unexpectedly early? */
- else if (fsg->short_packet_received) {
+ } else if (fsg->short_packet_received) {
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
rc = -EINTR;
- }
/* We haven't processed all the incoming data. Even though
* we may be allowed to stall, doing so would cause a race.
@@ -1538,17 +1597,17 @@ static int finish_reply(struct fsg_dev *fsg)
* STALL. Not realizing the endpoint was halted, it wouldn't
* clear the halt -- leading to problems later on. */
#if 0
- else if (fsg->can_stall) {
+ } else if (fsg->can_stall) {
fsg_set_halt(fsg, fsg->bulk_out);
raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
rc = -EINTR;
- }
#endif
/* We can't stall. Read in the excess data and throw it
* all away. */
- else
+ } else {
rc = throw_away_data(fsg);
+ }
break;
}
return rc;
@@ -1593,7 +1652,7 @@ static int send_status(struct fsg_dev *fsg)
}
/* Store and send the Bulk-only CSW */
- csw = (void*)bh->buf;
+ csw = (void *)bh->buf;
csw->Signature = cpu_to_le32(USB_BULK_CS_SIG);
csw->Tag = fsg->tag;
@@ -1629,18 +1688,18 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size,
sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
fsg->data_size);
VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
- name, cmnd_size, dirletter[(int) data_dir],
- fsg->data_size_from_cmnd, fsg->common->cmnd_size, hdlen);
+ name, cmnd_size, dirletter[(int) data_dir],
+ fsg->data_size_from_cmnd, fsg->common->cmnd_size, hdlen);
/* We can't reply at all until we know the correct data direction
* and size. */
if (fsg->data_size_from_cmnd == 0)
data_dir = DATA_DIR_NONE;
- if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI
+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { /* CB or CBI */
fsg->data_dir = data_dir;
fsg->data_size = fsg->data_size_from_cmnd;
- } else { // Bulk-only
+ } else { /* Bulk-only */
if (fsg->data_size < fsg->data_size_from_cmnd) {
/* Host data size < Device data size is a phase error.
@@ -1691,7 +1750,8 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size,
/* Check the LUN */
if (fsg->common->lun >= 0 && fsg->common->lun < fsg->common->nluns) {
- fsg->common->curlun = curlun = &fsg->common->luns[fsg->common->lun];
+ curlun = &fsg->common->luns[fsg->common->lun];
+ fsg->common->curlun = curlun;
if (fsg->common->cmnd[0] != SC_REQUEST_SENSE) {
curlun->sense_data = SS_NO_SENSE;
curlun->sense_data_info = 0;
@@ -1721,7 +1781,7 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size,
}
/* Check that only command bytes listed in the mask are non-zero */
- fsg->common->cmnd[1] &= 0x1f; // Mask away the LUN
+ fsg->common->cmnd[1] &= 0x1f; /* Mask away the LUN */
for (i = 1; i < cmnd_size; ++i) {
if (fsg->common->cmnd[i] && !(mask & (1 << i))) {
if (curlun)
@@ -1752,7 +1812,8 @@ static int do_scsi_command(struct fsg_dev *fsg)
dump_cdb(fsg->common);
/* Wait for the next buffer to become available for data or status */
- bh = fsg->common->next_buffhd_to_drain = fsg->common->next_buffhd_to_fill;
+ bh = fsg->common->next_buffhd_to_fill;
+ fsg->common->next_buffhd_to_drain = bh;
while (bh->state != BUF_STATE_EMPTY) {
rc = sleep_thread(fsg);
if (rc)
@@ -1761,141 +1822,163 @@ static int do_scsi_command(struct fsg_dev *fsg)
fsg->phase_error = 0;
fsg->short_packet_received = 0;
- down_read(&fsg->common->filesem); // We're using the backing file
+ /* We're using the backing file */
+ down_read(&fsg->common->filesem);
switch (fsg->common->cmnd[0]) {
case SC_INQUIRY:
fsg->data_size_from_cmnd = fsg->common->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "INQUIRY")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "INQUIRY");
+ if (reply == 0)
reply = do_inquiry(fsg, bh);
break;
case SC_MODE_SELECT_6:
fsg->data_size_from_cmnd = fsg->common->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
- (1<<1) | (1<<4), 0,
- "MODE SELECT(6)")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (1<<1) | (1<<4), 0,
+ "MODE SELECT(6)");
+ if (reply == 0)
reply = do_mode_select(fsg, bh);
break;
case SC_MODE_SELECT_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
- (1<<1) | (3<<7), 0,
- "MODE SELECT(10)")) == 0)
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->common->cmnd[7]);
+ reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (3<<7), 0,
+ "MODE SELECT(10)");
+ if (reply == 0)
reply = do_mode_select(fsg, bh);
break;
case SC_MODE_SENSE_6:
fsg->data_size_from_cmnd = fsg->common->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (1<<4), 0,
- "MODE SENSE(6)")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (1<<4), 0,
+ "MODE SENSE(6)");
+ if (reply == 0)
reply = do_mode_sense(fsg, bh);
break;
case SC_MODE_SENSE_10:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (1<<1) | (1<<2) | (3<<7), 0,
- "MODE SENSE(10)")) == 0)
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->common->cmnd[7]);
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (3<<7), 0,
+ "MODE SENSE(10)");
+ if (reply == 0)
reply = do_mode_sense(fsg, bh);
break;
case SC_PREVENT_ALLOW_MEDIUM_REMOVAL:
fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
- (1<<4), 0,
- "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<4), 0,
+ "PREVENT-ALLOW MEDIUM REMOVAL");
+ if (reply == 0)
reply = do_prevent_allow(fsg);
break;
case SC_READ_6:
i = fsg->common->cmnd[4];
fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (7<<1) | (1<<4), 1,
- "READ(6)")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (7<<1) | (1<<4), 1,
+ "READ(6)");
+ if (reply == 0)
reply = do_read(fsg);
break;
case SC_READ_10:
fsg->data_size_from_cmnd =
get_unaligned_be16(&fsg->common->cmnd[7]) << 9;
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "READ(10)")) == 0)
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "READ(10)");
+ if (reply == 0)
reply = do_read(fsg);
break;
case SC_READ_12:
fsg->data_size_from_cmnd =
get_unaligned_be32(&fsg->common->cmnd[6]) << 9;
- if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "READ(12)")) == 0)
+ reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "READ(12)");
+ if (reply == 0)
reply = do_read(fsg);
break;
case SC_READ_CAPACITY:
fsg->data_size_from_cmnd = 8;
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (0xf<<2) | (1<<8), 1,
- "READ CAPACITY")) == 0)
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (0xf<<2) | (1<<8), 1,
+ "READ CAPACITY");
+ if (reply == 0)
reply = do_read_capacity(fsg, bh);
break;
case SC_READ_HEADER:
if (!fsg->common->curlun || !fsg->common->curlun->cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (3<<7) | (0x1f<<1), 1,
- "READ HEADER")) == 0)
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->common->cmnd[7]);
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (3<<7) | (0x1f<<1), 1,
+ "READ HEADER");
+ if (reply == 0)
reply = do_read_header(fsg, bh);
break;
case SC_READ_TOC:
if (!fsg->common->curlun || !fsg->common->curlun->cdrom)
goto unknown_cmnd;
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (7<<6) | (1<<1), 1,
- "READ TOC")) == 0)
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->common->cmnd[7]);
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (7<<6) | (1<<1), 1,
+ "READ TOC");
+ if (reply == 0)
reply = do_read_toc(fsg, bh);
break;
case SC_READ_FORMAT_CAPACITIES:
- fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]);
- if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
- (3<<7), 1,
- "READ FORMAT CAPACITIES")) == 0)
+ fsg->data_size_from_cmnd =
+ get_unaligned_be16(&fsg->common->cmnd[7]);
+ reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (3<<7), 1,
+ "READ FORMAT CAPACITIES");
+ if (reply == 0)
reply = do_read_format_capacities(fsg, bh);
break;
case SC_REQUEST_SENSE:
fsg->data_size_from_cmnd = fsg->common->cmnd[4];
- if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
- (1<<4), 0,
- "REQUEST SENSE")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "REQUEST SENSE");
+ if (reply == 0)
reply = do_request_sense(fsg, bh);
break;
case SC_START_STOP_UNIT:
fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
- (1<<1) | (1<<4), 0,
- "START-STOP UNIT")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<1) | (1<<4), 0,
+ "START-STOP UNIT");
+ if (reply == 0)
reply = do_start_stop(fsg);
break;
case SC_SYNCHRONIZE_CACHE:
fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
- (0xf<<2) | (3<<7), 1,
- "SYNCHRONIZE CACHE")) == 0)
+ reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (0xf<<2) | (3<<7), 1,
+ "SYNCHRONIZE CACHE");
+ if (reply == 0)
reply = do_synchronize_cache(fsg);
break;
@@ -1910,36 +1993,40 @@ static int do_scsi_command(struct fsg_dev *fsg)
* support a minimal version: BytChk must be 0. */
case SC_VERIFY:
fsg->data_size_from_cmnd = 0;
- if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "VERIFY")) == 0)
+ reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "VERIFY");
+ if (reply == 0)
reply = do_verify(fsg);
break;
case SC_WRITE_6:
i = fsg->common->cmnd[4];
fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
- if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
- (7<<1) | (1<<4), 1,
- "WRITE(6)")) == 0)
+ reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (7<<1) | (1<<4), 1,
+ "WRITE(6)");
+ if (reply == 0)
reply = do_write(fsg);
break;
case SC_WRITE_10:
fsg->data_size_from_cmnd =
get_unaligned_be16(&fsg->common->cmnd[7]) << 9;
- if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (3<<7), 1,
- "WRITE(10)")) == 0)
+ reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "WRITE(10)");
+ if (reply == 0)
reply = do_write(fsg);
break;
case SC_WRITE_12:
fsg->data_size_from_cmnd =
get_unaligned_be32(&fsg->common->cmnd[6]) << 9;
- if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
- (1<<1) | (0xf<<2) | (0xf<<6), 1,
- "WRITE(12)")) == 0)
+ reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "WRITE(12)");
+ if (reply == 0)
reply = do_write(fsg);
break;
@@ -1951,14 +2038,15 @@ static int do_scsi_command(struct fsg_dev *fsg)
case SC_RELEASE:
case SC_RESERVE:
case SC_SEND_DIAGNOSTIC:
- // Fall through
+ /* Fall through */
default:
- unknown_cmnd:
+unknown_cmnd:
fsg->data_size_from_cmnd = 0;
sprintf(unknown, "Unknown x%02x", fsg->common->cmnd[0]);
- if ((reply = check_command(fsg, fsg->common->cmnd_size,
- DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ reply = check_command(fsg, fsg->common->cmnd_size,
+ DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+ if (reply == 0) {
fsg->common->curlun->sense_data = SS_INVALID_COMMAND;
reply = -EINVAL;
}
@@ -1971,13 +2059,13 @@ static int do_scsi_command(struct fsg_dev *fsg)
/* Set up the single reply buffer for finish_reply() */
if (reply == -EINVAL)
- reply = 0; // Error reply length
+ reply = 0; /* Error reply length */
if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
reply = min((u32) reply, fsg->data_size_from_cmnd);
bh->inreq->length = reply;
bh->state = BUF_STATE_FULL;
fsg->residue -= reply;
- } // Otherwise it's already set
+ } /* Otherwise it's already set */
return 0;
}
@@ -2157,13 +2245,15 @@ reset:
/* Enable the endpoints */
d = fsg_ep_desc(fsg->gadget,
&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
- if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
+ rc = enable_endpoint(fsg, fsg->bulk_in, d);
+ if (rc != 0)
goto reset;
fsg->bulk_in_enabled = 1;
d = fsg_ep_desc(fsg->gadget,
&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
- if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
+ rc = enable_endpoint(fsg, fsg->bulk_out, d);
+ if (rc != 0)
goto reset;
fsg->bulk_out_enabled = 1;
fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
@@ -2173,9 +2263,11 @@ reset:
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
struct fsg_buffhd *bh = &fsg->common->buffhds[i];
- if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
+ rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq);
+ if (rc != 0)
goto reset;
- if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
+ rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq);
+ if (rc != 0)
goto reset;
bh->inreq->buf = bh->outreq->buf = bh->buf;
bh->inreq->context = bh->outreq->context = bh;
@@ -2302,9 +2394,8 @@ static void handle_exception(struct fsg_dev *fsg)
bh = &fsg->common->buffhds[i];
bh->state = BUF_STATE_EMPTY;
}
- fsg->common->next_buffhd_to_fill = fsg->common->next_buffhd_to_drain =
- &fsg->common->buffhds[0];
-
+ fsg->common->next_buffhd_to_fill = &fsg->common->buffhds[0];
+ fsg->common->next_buffhd_to_drain = &fsg->common->buffhds[0];
exception_req_tag = fsg->exception_req_tag;
new_config = fsg->new_config;
old_state = fsg->state;
@@ -2315,8 +2406,8 @@ static void handle_exception(struct fsg_dev *fsg)
for (i = 0; i < fsg->common->nluns; ++i) {
curlun = &fsg->common->luns[i];
curlun->prevent_medium_removal = 0;
- curlun->sense_data = curlun->unit_attention_data =
- SS_NO_SENSE;
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->unit_attention_data = SS_NO_SENSE;
curlun->sense_data_info = 0;
curlun->info_valid = 0;
}
@@ -2342,30 +2433,31 @@ static void handle_exception(struct fsg_dev *fsg)
usb_ep_clear_halt(fsg->bulk_in);
if (fsg->ep0_req_tag == exception_req_tag)
- ep0_queue(fsg); // Complete the status stage
+ ep0_queue(fsg); /* Complete the status stage */
/* Technically this should go here, but it would only be
* a waste of time. Ditto for the INTERFACE_CHANGE and
* CONFIG_CHANGE cases. */
- // for (i = 0; i < fsg->common->nluns; ++i)
- // fsg->common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+ /* for (i = 0; i < fsg->common->nluns; ++i) */
+ /* fsg->common->luns[i].unit_attention_data = */
+ /* SS_RESET_OCCURRED; */
break;
case FSG_STATE_CONFIG_CHANGE:
rc = do_set_config(fsg, new_config);
if (fsg->ep0_req_tag != exception_req_tag)
break;
- if (rc != 0) // STALL on errors
+ if (rc != 0) /* STALL on errors */
fsg_set_halt(fsg, fsg->ep0);
- else // Complete the status stage
+ else /* Complete the status stage */
ep0_queue(fsg);
break;
case FSG_STATE_EXIT:
case FSG_STATE_TERMINATED:
- do_set_config(fsg, 0); // Free resources
+ do_set_config(fsg, 0); /* Free resources */
spin_lock_irq(&fsg->lock);
- fsg->state = FSG_STATE_TERMINATED; // Stop the thread
+ fsg->state = FSG_STATE_TERMINATED; /* Stop the thread */
spin_unlock_irq(&fsg->lock);
break;
@@ -2645,7 +2737,8 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
error_luns:
common->nluns = i + 1;
error_release:
- /* Call fsg_common_release() directly, ref is not initialised */
+ /* Call fsg_common_release() directly, ref might be not
+ * initialised */
fsg_common_release(&common->ref);
return ERR_PTR(rc);
}
@@ -2721,13 +2814,13 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
if (!ep)
goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
+ ep->driver_data = fsg; /* claim the endpoint */
fsg->bulk_in = ep;
ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
if (!ep)
goto autoconf_fail;
- ep->driver_data = fsg; // claim the endpoint
+ ep->driver_data = fsg; /* claim the endpoint */
fsg->bulk_out = ep;
if (gadget_is_dualspeed(gadget)) {
@@ -2770,7 +2863,7 @@ autoconf_fail:
rc = -ENOTSUPP;
out:
- fsg->state = FSG_STATE_TERMINATED; // The thread is dead
+ fsg->state = FSG_STATE_TERMINATED; /* The thread is dead */
fsg_unbind(c, f);
complete(&fsg->thread_notifier);
return rc;
@@ -2874,18 +2967,16 @@ fsg_config_from_params(struct fsg_config *cfg,
const struct fsg_module_parameters *params)
{
struct fsg_lun_config *lun;
- unsigned i, nluns;
+ unsigned i;
/* Configure LUNs */
- nluns = cfg->nluns = !params->luns
- ? params->file_count ? params->file_count : 1
- : params->luns;
- for (i = 0, lun = cfg->luns;
- i < FSG_MAX_LUNS && i < nluns;
- ++i, ++lun) {
+ cfg->nluns =
+ min(params->luns ?: (params->file_count ?: 1u),
+ (unsigned)FSG_MAX_LUNS);
+ for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) {
lun->ro = !!params->ro[i];
lun->cdrom = !!params->cdrom[i];
- lun->removable =
+ lun->removable = /* Removable by default */
params->removable_count <= i || params->removable[i];
lun->filename =
params->file_count > i && params->file[i][0]
@@ -2893,7 +2984,7 @@ fsg_config_from_params(struct fsg_config *cfg,
: 0;
}
- /* Let FSG use defaults */
+ /* Let MSF use defaults */
cfg->lun_name_format = 0;
cfg->thread_name = 0;
cfg->vendor_name = 0;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 00396a36d011..e43ca8f4be14 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -1,10 +1,10 @@
/*
- * mass_storage.c -- File-backed USB Storage Gadget, for USB development
+ * mass_storage.c -- Mass Storage USB Gadget
*
* Copyright (C) 2003-2008 Alan Stern
- *
* Copyright (C) 2009 Samsung Electronics
* Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ * All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,7 +45,7 @@
/*-------------------------------------------------------------------------*/
#define DRIVER_DESC "Mass Storage Gadget"
-#define DRIVER_VERSION "2009/07/21"
+#define DRIVER_VERSION "2009/09/11"
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 7e81a2d898f0..868d8ee86756 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -61,8 +61,8 @@
*
* DO NOT REUSE THESE IDs with any other driver!! Ever!!
* Instead: allocate your own, using normal USB-IF procedures. */
-#define FSG_VENDOR_ID 0x0525 // NetChip
-#define FSG_PRODUCT_ID 0xa4a5 // Linux-USB File-backed Storage Gadget
+#define FSG_VENDOR_ID 0x0525 /* NetChip */
+#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
/*-------------------------------------------------------------------------*/
@@ -103,7 +103,7 @@
#ifdef DUMP_MSGS
# define dump_msg(fsg, /* const char * */ label, \
- /* const u8 * */ buf, /* unsigned */ length) do { \
+ /* const u8 * */ buf, /* unsigned */ length) do { \
if (length < 512) { \
DBG(fsg, "%s, length %u:\n", label, length); \
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
@@ -116,11 +116,11 @@
#else
# define dump_msg(fsg, /* const char * */ label, \
- /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
+ /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
# ifdef VERBOSE_DEBUG
-#define dump_cdb(fsg) \
+# define dump_cdb(fsg) \
print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \
16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \
@@ -143,45 +143,45 @@
#define TYPE_CDROM 0x05
/* USB protocol value = the transport method */
-#define USB_PR_CBI 0x00 // Control/Bulk/Interrupt
-#define USB_PR_CB 0x01 // Control/Bulk w/o interrupt
-#define USB_PR_BULK 0x50 // Bulk-only
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK 0x50 /* Bulk-only */
/* USB subclass value = the protocol encapsulation */
-#define USB_SC_RBC 0x01 // Reduced Block Commands (flash)
-#define USB_SC_8020 0x02 // SFF-8020i, MMC-2, ATAPI (CD-ROM)
-#define USB_SC_QIC 0x03 // QIC-157 (tape)
-#define USB_SC_UFI 0x04 // UFI (floppy)
-#define USB_SC_8070 0x05 // SFF-8070i (removable)
-#define USB_SC_SCSI 0x06 // Transparent SCSI
+#define USB_SC_RBC 0x01 /* Reduced Block Commands (flash) */
+#define USB_SC_8020 0x02 /* SFF-8020i, MMC-2, ATAPI (CD-ROM) */
+#define USB_SC_QIC 0x03 /* QIC-157 (tape) */
+#define USB_SC_UFI 0x04 /* UFI (floppy) */
+#define USB_SC_8070 0x05 /* SFF-8070i (removable) */
+#define USB_SC_SCSI 0x06 /* Transparent SCSI */
/* Bulk-only data structures */
/* Command Block Wrapper */
struct fsg_bulk_cb_wrap {
- __le32 Signature; // Contains 'USBC'
- u32 Tag; // Unique per command id
- __le32 DataTransferLength; // Size of the data
- u8 Flags; // Direction in bit 7
- u8 Lun; // LUN (normally 0)
- u8 Length; // Of the CDB, <= MAX_COMMAND_SIZE
- u8 CDB[16]; // Command Data Block
+ __le32 Signature; /* Contains 'USBC' */
+ u32 Tag; /* Unique per command id */
+ __le32 DataTransferLength; /* Size of the data */
+ u8 Flags; /* Direction in bit 7 */
+ u8 Lun; /* LUN (normally 0) */
+ u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */
+ u8 CDB[16]; /* Command Data Block */
};
#define USB_BULK_CB_WRAP_LEN 31
-#define USB_BULK_CB_SIG 0x43425355 // Spells out USBC
+#define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */
#define USB_BULK_IN_FLAG 0x80
/* Command Status Wrapper */
struct bulk_cs_wrap {
- __le32 Signature; // Should = 'USBS'
- u32 Tag; // Same as original command
- __le32 Residue; // Amount not transferred
- u8 Status; // See below
+ __le32 Signature; /* Should = 'USBS' */
+ u32 Tag; /* Same as original command */
+ __le32 Residue; /* Amount not transferred */
+ u8 Status; /* See below */
};
#define USB_BULK_CS_WRAP_LEN 13
-#define USB_BULK_CS_SIG 0x53425355 // Spells out 'USBS'
+#define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */
#define USB_STATUS_PASS 0
#define USB_STATUS_FAIL 1
#define USB_STATUS_PHASE_ERROR 2
@@ -203,7 +203,8 @@ struct interrupt_data {
#define USB_CBI_ADSC_REQUEST 0x00
-#define MAX_COMMAND_SIZE 16 // Length of a SCSI Command Data Block
+/* Length of a SCSI Command Data Block */
+#define MAX_COMMAND_SIZE 16
/* SCSI commands that we recognize */
#define SC_FORMAT_UNIT 0x04
@@ -248,7 +249,7 @@ struct interrupt_data {
#define SS_WRITE_ERROR 0x030c02
#define SS_WRITE_PROTECTED 0x072700
-#define SK(x) ((u8) ((x) >> 16)) // Sense Key byte, etc.
+#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */
#define ASC(x) ((u8) ((x) >> 8))
#define ASCQ(x) ((u8) (x))
@@ -261,13 +262,13 @@ struct fsg_lun {
loff_t file_length;
loff_t num_sectors;
- unsigned int initially_ro : 1;
- unsigned int ro : 1;
- unsigned int removable : 1;
- unsigned int cdrom : 1;
- unsigned int prevent_medium_removal : 1;
- unsigned int registered : 1;
- unsigned int info_valid : 1;
+ unsigned int initially_ro:1;
+ unsigned int ro:1;
+ unsigned int removable:1;
+ unsigned int cdrom:1;
+ unsigned int prevent_medium_removal:1;
+ unsigned int registered:1;
+ unsigned int info_valid:1;
u32 sense_data;
u32 sense_data_info;
@@ -286,7 +287,7 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
/* Big enough to hold our biggest descriptor */
#define EP0_BUFSIZE 256
-#define DELAYED_STATUS (EP0_BUFSIZE + 999) // An impossibly large value
+#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
/* Number of buffers we will use. 2 is enough for double-buffering */
#define FSG_NUM_BUFFERS 2
@@ -324,7 +325,8 @@ struct fsg_buffhd {
};
enum fsg_state {
- FSG_STATE_COMMAND_PHASE = -10, // This one isn't used anywhere
+ /* This one isn't used anywhere */
+ FSG_STATE_COMMAND_PHASE = -10,
FSG_STATE_DATA_PHASE,
FSG_STATE_STATUS_PHASE,
@@ -386,10 +388,10 @@ fsg_intf_desc = {
.bLength = sizeof fsg_intf_desc,
.bDescriptorType = USB_DT_INTERFACE,
- .bNumEndpoints = 2, // Adjusted during fsg_bind()
+ .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
- .bInterfaceSubClass = USB_SC_SCSI, // Adjusted during fsg_bind()
- .bInterfaceProtocol = USB_PR_BULK, // Adjusted during fsg_bind()
+ .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */
+ .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */
.iInterface = FSG_STRING_INTERFACE,
};
@@ -426,7 +428,7 @@ fsg_fs_intr_in_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(2),
- .bInterval = 32, // frames -> 32 ms
+ .bInterval = 32, /* frames -> 32 ms */
};
#ifndef FSG_NO_OTG
@@ -477,7 +479,7 @@ fsg_hs_bulk_out_desc = {
/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
- .bInterval = 1, // NAK every 1 uframe
+ .bInterval = 1, /* NAK every 1 uframe */
};
#ifndef FSG_NO_INTR_EP
@@ -490,7 +492,7 @@ fsg_hs_intr_in_desc = {
/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(2),
- .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms
+ .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */
};
#ifndef FSG_NO_OTG
@@ -538,7 +540,7 @@ static struct usb_string fsg_strings[] = {
};
static struct usb_gadget_strings fsg_stringtab = {
- .language = 0x0409, // en-us
+ .language = 0x0409, /* en-us */
.strings = fsg_strings,
};
@@ -600,11 +602,11 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
rc = (int) size;
goto out;
}
- num_sectors = size >> 9; // File size in 512-byte blocks
+ num_sectors = size >> 9; /* File size in 512-byte blocks */
min_sectors = 1;
if (curlun->cdrom) {
- num_sectors &= ~3; // Reduce to a multiple of 2048
- min_sectors = 300*4; // Smallest track is 300 frames
+ num_sectors &= ~3; /* Reduce to a multiple of 2048 */
+ min_sectors = 300*4; /* Smallest track is 300 frames */
if (num_sectors >= 256*60*75*4) {
num_sectors = (256*60*75 - 1) * 4;
LINFO(curlun, "file too big: %s\n", filename);
@@ -696,17 +698,17 @@ static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
ssize_t rc;
down_read(filesem);
- if (fsg_lun_is_open(curlun)) { // Get the complete pathname
+ if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */
p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1);
if (IS_ERR(p))
rc = PTR_ERR(p);
else {
rc = strlen(p);
memmove(buf, p, rc);
- buf[rc] = '\n'; // Add a newline
+ buf[rc] = '\n'; /* Add a newline */
buf[++rc] = 0;
}
- } else { // No file, return 0 bytes
+ } else { /* No file, return 0 bytes */
*buf = 0;
rc = 0;
}
@@ -750,12 +752,12 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
LDBG(curlun, "eject attempt prevented\n");
- return -EBUSY; // "Door is locked"
+ return -EBUSY; /* "Door is locked" */
}
/* Remove a trailing newline */
if (count > 0 && buf[count-1] == '\n')
- ((char *) buf)[count-1] = 0; // Ugh!
+ ((char *) buf)[count-1] = 0; /* Ugh! */
/* Eject current medium */
down_write(filesem);