staging: crystalhd: Fix typo in crystalhd

Correct spelling typo.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9 files changed, 12 insertions, 12 deletions

diff --git a/drivers/staging/crystalhd/bc_dts_glob_lnx.h b/drivers/staging/crystalhd/bc_dts_glob_lnx.h
index 981708f3ee39..92b0cff248cb 100644
--- a/drivers/staging/crystalhd/bc_dts_glob_lnx.h
+++ b/drivers/staging/crystalhd/bc_dts_glob_lnx.h
@@ -229,7 +229,7 @@ enum BC_DRV_CMD {
 	DRV_CMD_REG_RD,		/* Read Device Register */
 	DRV_CMD_REG_WR,		/* Write Device Register */
 	DRV_CMD_FPGA_RD,	/* Read FPGA Register */
-	DRV_CMD_FPGA_WR,	/* Wrtie FPGA Reister */
+	DRV_CMD_FPGA_WR,	/* Write FPGA Register */
 	DRV_CMD_MEM_RD,		/* Read Device Memory */
 	DRV_CMD_MEM_WR,		/* Write Device Memory */
 	DRV_CMD_RD_PCI_CFG,	/* Read PCI Config Space */
diff --git a/drivers/staging/crystalhd/crystalhd_cmds.c b/drivers/staging/crystalhd/crystalhd_cmds.c
index 3972b52e1416..642f438793c3 100644
--- a/drivers/staging/crystalhd/crystalhd_cmds.c
+++ b/drivers/staging/crystalhd/crystalhd_cmds.c
@@ -798,7 +798,7 @@ static const struct crystalhd_cmd_tbl	g_crystalhd_cproc_tbl[] = {
  *
  * Current gstreamer frame work does not provide any power management
  * related notification to user mode decoder plug-in. As a work-around
- * we pass on the power mangement notification to our plug-in by completing
+ * we pass on the power management notification to our plug-in by completing
  * all outstanding requests with BC_STS_IO_USER_ABORT return code.
  */
 enum BC_STATUS crystalhd_suspend(struct crystalhd_cmd *ctx,
diff --git a/drivers/staging/crystalhd/crystalhd_cmds.h b/drivers/staging/crystalhd/crystalhd_cmds.h
index 377cd9d68b08..b5bf59dbcde9 100644
--- a/drivers/staging/crystalhd/crystalhd_cmds.h
+++ b/drivers/staging/crystalhd/crystalhd_cmds.h
@@ -29,7 +29,7 @@
 
 /*
  * NOTE:: This is the main interface file between the Linux layer
- *        and the harware layer. This file will use the definitions
+ *        and the hardware layer. This file will use the definitions
  *        from _dts_glob and dts_defs etc.. which are defined for
  *        windows.
  */
diff --git a/drivers/staging/crystalhd/crystalhd_fw_if.h b/drivers/staging/crystalhd/crystalhd_fw_if.h
index 4b363a5069d7..05615e2a231a 100644
--- a/drivers/staging/crystalhd/crystalhd_fw_if.h
+++ b/drivers/staging/crystalhd/crystalhd_fw_if.h
@@ -115,7 +115,7 @@ struct fgt_sei {
 	unsigned char model_id;	/* Model id. */
 
 	/* +unused SE based on Thomson spec */
-	unsigned char color_desc_flag;	/* Separate color descrition flag. */
+	unsigned char color_desc_flag;	/* Separate color description flag. */
 	unsigned char bit_depth_luma;	/* Bit depth luma minus 8. */
 	unsigned char bit_depth_chroma;	/* Bit depth chroma minus 8. */
 	unsigned char full_range_flag;	/* Full range flag. */
diff --git a/drivers/staging/crystalhd/crystalhd_hw.c b/drivers/staging/crystalhd/crystalhd_hw.c
index 043bd49843ff..8d0680d93684 100644
--- a/drivers/staging/crystalhd/crystalhd_hw.c
+++ b/drivers/staging/crystalhd/crystalhd_hw.c
@@ -398,7 +398,7 @@ static void crystalhd_hw_free_rx_pkt(struct crystalhd_hw *hw,
  * Call back from TX - IOQ deletion.
  *
  * This routine will release the TX DMA rings allocated
- * druing setup_dma rings interface.
+ * during setup_dma rings interface.
  *
  * Memory is allocated per DMA ring basis. This is just
  * a place holder to be able to create the dio queues.
diff --git a/drivers/staging/crystalhd/crystalhd_hw.h b/drivers/staging/crystalhd/crystalhd_hw.h
index 37809442c553..d5cb68dfe695 100644
--- a/drivers/staging/crystalhd/crystalhd_hw.h
+++ b/drivers/staging/crystalhd/crystalhd_hw.h
@@ -46,7 +46,7 @@
 #define Cpu2HstMbx1		0x00100F04
 #define MbxStat1		0x00100F08
 #define Stream2Host_Intr_Sts	0x00100F24
-#define C011_RET_SUCCESS	0x0 /* Reutrn status of firmware command. */
+#define C011_RET_SUCCESS	0x0 /* Return status of firmware command. */
 
 /* TS input status register */
 #define TS_StreamAFIFOStatus	0x0010044C
@@ -141,7 +141,7 @@ union link_misc_perst_deco_ctrl {
 		uint32_t	reserved0:3;		/* Reserved.No Effect*/
 		uint32_t	stop_bcm_7412_clk:1;	/* 1 ->Stops branch of
 						27MHz clk used to clk BCM7412*/
-		uint32_t	reserved1:27;		/* Reseved. No Effect*/
+		uint32_t	reserved1:27;		/* Reserved. No Effect*/
 	};
 
 	uint32_t	whole_reg;
@@ -176,7 +176,7 @@ union link_misc_perst_decoder_ctrl {
 		uint32_t	res0:3; /* Reserved.No Effect*/
 		uint32_t	stop_7412_clk:1; /* 1 ->Stops branch of 27MHz
 						 clk used to clk BCM7412*/
-		uint32_t	res1:27; /* Reseved. No Effect */
+		uint32_t	res1:27; /* Reserved. No Effect */
 	};
 
 	uint32_t	whole_reg;
diff --git a/drivers/staging/crystalhd/crystalhd_lnx.h b/drivers/staging/crystalhd/crystalhd_lnx.h
index bac572a8bc2e..33d7431de837 100644
--- a/drivers/staging/crystalhd/crystalhd_lnx.h
+++ b/drivers/staging/crystalhd/crystalhd_lnx.h
@@ -53,7 +53,7 @@
 
 /* OS specific PCI information structure and adapter information. */
 struct crystalhd_adp {
-	/* Hardware borad/PCI specifics */
+	/* Hardware board/PCI specifics */
 	char			name[32];
 	struct pci_dev		*pdev;
 
diff --git a/drivers/staging/crystalhd/crystalhd_misc.c b/drivers/staging/crystalhd/crystalhd_misc.c
index 51f698052aff..c3d024406337 100644
--- a/drivers/staging/crystalhd/crystalhd_misc.c
+++ b/drivers/staging/crystalhd/crystalhd_misc.c
@@ -389,7 +389,7 @@ void *bc_kern_dma_alloc(struct crystalhd_adp *adp, uint32_t sz,
 	void *temp = NULL;
 
 	if (!adp || !sz || !phy_addr) {
-		BCMLOG_ERR("Invalide Arg..\n");
+		BCMLOG_ERR("Invalid Arg..\n");
 		return temp;
 	}
 
@@ -415,7 +415,7 @@ void bc_kern_dma_free(struct crystalhd_adp *adp, uint32_t sz, void *ka,
 		      dma_addr_t phy_addr)
 {
 	if (!adp || !ka || !sz || !phy_addr) {
-		BCMLOG_ERR("Invalide Arg..\n");
+		BCMLOG_ERR("Invalid Arg..\n");
 		return;
 	}
 
diff --git a/drivers/staging/crystalhd/crystalhd_misc.h b/drivers/staging/crystalhd/crystalhd_misc.h
index aa736c8855de..77ab72a2a061 100644
--- a/drivers/staging/crystalhd/crystalhd_misc.h
+++ b/drivers/staging/crystalhd/crystalhd_misc.h
@@ -206,7 +206,7 @@ extern void crystalhd_show_buffer(uint32_t off, uint8_t *buff,
 enum _chd_log_levels {
 	BCMLOG_ERROR		= 0x80000000,	/* Don't disable this option */
 	BCMLOG_DATA		= 0x40000000,	/* Data, enable by default */
-	BCMLOG_SPINLOCK		= 0x20000000,	/* Spcial case for Spin locks*/
+	BCMLOG_SPINLOCK		= 0x20000000,	/* Special case for Spin locks*/
 
 	/* Following are allowed only in debug mode */
 	BCMLOG_INFO		= 0x00000001,	/* Generic informational */