diff options
author | Vincent Cuissard <cuissard@marvell.com> | 2015-10-26 10:27:44 +0100 |
---|---|---|
committer | Samuel Ortiz <sameo@linux.intel.com> | 2015-10-27 04:24:35 +0100 |
commit | caf6e49bf6d02e6bb94df680bbe3beaf680fdefa (patch) | |
tree | 94c3e0be315322c66ed2347fb52666b5d81ede75 | |
parent | 2bd832459a0827b8dcf13b345380b66f92089d74 (diff) |
NFC: nfcmrvl: add spi driver
This driver adds the support of SPI-based Marvell NFC controller.
Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-rw-r--r-- | Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt | 25 | ||||
-rw-r--r-- | drivers/nfc/nfcmrvl/Kconfig | 10 | ||||
-rw-r--r-- | drivers/nfc/nfcmrvl/Makefile | 3 | ||||
-rw-r--r-- | drivers/nfc/nfcmrvl/main.c | 6 | ||||
-rw-r--r-- | drivers/nfc/nfcmrvl/spi.c | 228 |
5 files changed, 271 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt index 0fa20cc2c33c..41058fcbd9ae 100644 --- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt +++ b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Should be: - "mrvl,nfc-uart" for UART devices - "mrvl,nfc-i2c" for I2C devices + - "mrvl,nfc-spi" for SPI devices Optional SoC specific properties: - pinctrl-names: Contains only one value - "default". @@ -59,3 +60,27 @@ Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): reset-n-io = <&gpio3 19 0>; }; }; + + +Example (for ARM-based BeagleBoard Black on SPI0): + +&spi0 { + + mrvlnfcspi0: spi@0 { + compatible = "mrvl,nfc-spi"; + + reg = <0>; + + /* SPI Bus configuration */ + spi-max-frequency = <3000000>; + spi-cpha; + spi-cpol; + + /* SPI INT configuration */ + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; diff --git a/drivers/nfc/nfcmrvl/Kconfig b/drivers/nfc/nfcmrvl/Kconfig index e18a979bb6d3..444ca94697d9 100644 --- a/drivers/nfc/nfcmrvl/Kconfig +++ b/drivers/nfc/nfcmrvl/Kconfig @@ -42,3 +42,13 @@ config NFC_MRVL_I2C Say Y here to compile support for Marvell NFC-over-I2C driver into the kernel or say M to compile it as module. +config NFC_MRVL_SPI + tristate "Marvell NFC-over-SPI driver" + depends on NFC_MRVL && SPI + help + Marvell NFC-over-SPI driver. + + This driver provides support for Marvell NFC-over-SPI devices. + + Say Y here to compile support for Marvell NFC-over-SPI driver + into the kernel or say M to compile it as module. diff --git a/drivers/nfc/nfcmrvl/Makefile b/drivers/nfc/nfcmrvl/Makefile index 895866a3ebc6..fa07c7806492 100644 --- a/drivers/nfc/nfcmrvl/Makefile +++ b/drivers/nfc/nfcmrvl/Makefile @@ -13,3 +13,6 @@ obj-$(CONFIG_NFC_MRVL_UART) += nfcmrvl_uart.o nfcmrvl_i2c-y += i2c.o obj-$(CONFIG_NFC_MRVL_I2C) += nfcmrvl_i2c.o + +nfcmrvl_spi-y += spi.o +obj-$(CONFIG_NFC_MRVL_SPI) += nfcmrvl_spi.o diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c index 0c27de60a6bd..8079ae0de21e 100644 --- a/drivers/nfc/nfcmrvl/main.c +++ b/drivers/nfc/nfcmrvl/main.c @@ -132,7 +132,11 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy, nfc_err(dev, "failed to request reset_n io\n"); } - headroom = tailroom = 0; + if (phy == NFCMRVL_PHY_SPI) { + headroom = NCI_SPI_HDR_LEN; + tailroom = 1; + } else + headroom = tailroom = 0; if (priv->config.hci_muxed) headroom += NFCMRVL_HCI_EVENT_HEADER_SIZE; diff --git a/drivers/nfc/nfcmrvl/spi.c b/drivers/nfc/nfcmrvl/spi.c new file mode 100644 index 000000000000..358660acd54a --- /dev/null +++ b/drivers/nfc/nfcmrvl/spi.c @@ -0,0 +1,228 @@ +/** + * Marvell NFC-over-SPI driver: SPI interface related functions + * + * Copyright (C) 2015, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available on the worldwide web at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + **/ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/nfc.h> +#include <linux/gpio.h> +#include <linux/of_irq.h> +#include <linux/of_gpio.h> +#include <net/nfc/nci.h> +#include <net/nfc/nci_core.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include "nfcmrvl.h" + +#define SPI_WAIT_HANDSHAKE 1 + +struct nfcmrvl_spi_drv_data { + unsigned long flags; + struct spi_device *spi; + struct nci_spi *nci_spi; + struct completion handshake_completion; + struct nfcmrvl_private *priv; +}; + +static irqreturn_t nfcmrvl_spi_int_irq_thread_fn(int irq, void *drv_data_ptr) +{ + struct nfcmrvl_spi_drv_data *drv_data = drv_data_ptr; + struct sk_buff *skb; + + /* + * Special case where we are waiting for SPI_INT deassertion to start a + * transfer. + */ + if (test_and_clear_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags)) { + complete(&drv_data->handshake_completion); + return IRQ_HANDLED; + } + + /* Normal case, SPI_INT deasserted by slave to trigger a master read */ + + skb = nci_spi_read(drv_data->nci_spi); + if (!skb) { + nfc_err(&drv_data->spi->dev, "failed to read spi packet"); + return IRQ_HANDLED; + } + + if (nfcmrvl_nci_recv_frame(drv_data->priv, skb) < 0) + nfc_err(&drv_data->spi->dev, "corrupted RX packet"); + + return IRQ_HANDLED; +} + +static int nfcmrvl_spi_nci_open(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_spi_nci_close(struct nfcmrvl_private *priv) +{ + return 0; +} + +static int nfcmrvl_spi_nci_send(struct nfcmrvl_private *priv, + struct sk_buff *skb) +{ + struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data; + int err; + + /* Reinit completion for slave handshake */ + reinit_completion(&drv_data->handshake_completion); + set_bit(SPI_WAIT_HANDSHAKE, &drv_data->flags); + + /* + * Append a dummy byte at the end of SPI frame. This is due to a + * specific DMA implementation in the controller + */ + skb_put(skb, 1); + + /* Send the SPI packet */ + err = nci_spi_send(drv_data->nci_spi, &drv_data->handshake_completion, + skb); + if (err != 0) { + nfc_err(priv->dev, "spi_send failed %d", err); + kfree_skb(skb); + } + return err; +} + +static void nfcmrvl_spi_nci_update_config(struct nfcmrvl_private *priv, + const void *param) +{ + struct nfcmrvl_spi_drv_data *drv_data = priv->drv_data; + const struct nfcmrvl_fw_spi_config *config = param; + + drv_data->nci_spi->xfer_speed_hz = config->clk; +} + +static struct nfcmrvl_if_ops spi_ops = { + .nci_open = nfcmrvl_spi_nci_open, + .nci_close = nfcmrvl_spi_nci_close, + .nci_send = nfcmrvl_spi_nci_send, + .nci_update_config = nfcmrvl_spi_nci_update_config, +}; + +static int nfcmrvl_spi_parse_dt(struct device_node *node, + struct nfcmrvl_platform_data *pdata) +{ + int ret; + + ret = nfcmrvl_parse_dt(node, pdata); + if (ret < 0) { + pr_err("Failed to get generic entries\n"); + return ret; + } + + ret = irq_of_parse_and_map(node, 0); + if (ret < 0) { + pr_err("Unable to get irq, error: %d\n", ret); + return ret; + } + pdata->irq = ret; + + return 0; +} + +static int nfcmrvl_spi_probe(struct spi_device *spi) +{ + struct nfcmrvl_platform_data *pdata; + struct nfcmrvl_platform_data config; + struct nfcmrvl_spi_drv_data *drv_data; + int ret = 0; + + drv_data = devm_kzalloc(&spi->dev, sizeof(*drv_data), GFP_KERNEL); + if (!drv_data) + return -ENOMEM; + + drv_data->spi = spi; + drv_data->priv = NULL; + spi_set_drvdata(spi, drv_data); + + pdata = spi->dev.platform_data; + + if (!pdata && spi->dev.of_node) + if (nfcmrvl_spi_parse_dt(spi->dev.of_node, &config) == 0) + pdata = &config; + + if (!pdata) + return -EINVAL; + + ret = devm_request_threaded_irq(&drv_data->spi->dev, pdata->irq, + NULL, nfcmrvl_spi_int_irq_thread_fn, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "nfcmrvl_spi_int", drv_data); + if (ret < 0) { + nfc_err(&drv_data->spi->dev, "Unable to register IRQ handler"); + return -ENODEV; + } + + drv_data->priv = nfcmrvl_nci_register_dev(NFCMRVL_PHY_SPI, + drv_data, &spi_ops, + &drv_data->spi->dev, + pdata); + if (IS_ERR(drv_data->priv)) + return PTR_ERR(drv_data->priv); + + drv_data->priv->support_fw_dnld = true; + + drv_data->nci_spi = nci_spi_allocate_spi(drv_data->spi, 0, 10, + drv_data->priv->ndev); + + /* Init completion for slave handshake */ + init_completion(&drv_data->handshake_completion); + return 0; +} + +static int nfcmrvl_spi_remove(struct spi_device *spi) +{ + struct nfcmrvl_spi_drv_data *drv_data = spi_get_drvdata(spi); + + nfcmrvl_nci_unregister_dev(drv_data->priv); + return 0; +} + +static const struct of_device_id of_nfcmrvl_spi_match[] = { + { .compatible = "mrvl,nfc-spi", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_nfcmrvl_spi_match); + +static const struct spi_device_id nfcmrvl_spi_id_table[] = { + { "nfcmrvl_spi", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, nfcmrvl_spi_id_table); + +static struct spi_driver nfcmrvl_spi_driver = { + .probe = nfcmrvl_spi_probe, + .remove = nfcmrvl_spi_remove, + .id_table = nfcmrvl_spi_id_table, + .driver = { + .name = "nfcmrvl_spi", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_nfcmrvl_spi_match), + }, +}; + +module_spi_driver(nfcmrvl_spi_driver); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell NFC-over-SPI driver"); +MODULE_LICENSE("GPL v2"); |