diff options
| author | Tudor Ambarus <tudor.ambarus@microchip.com> | 2020-12-07 15:59:56 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2020-12-07 14:18:04 +0000 |
| commit | cac8c821059639b015586abf61623c62cc549a13 (patch) | |
| tree | 4bc0c347646fbb3fd623fd7adf9be37372b82649 | |
| parent | 3650b228f83adda7e5ee532e2b90429c03f7b9ec (diff) | |
spi: atmel-quadspi: Fix AHB memory accesses
Following error was seen when mounting a 16MByte ubifs:
UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type
QSPI_IFR.TFRTYP was not set correctly. When data transfer is enabled
and one wants to access the serial memory through AHB in order to:
- read in the serial memory, but not a memory data, for example
a JEDEC-ID, QSPI_IFR.TFRTYP must be written to '0' (both sama5d2
and sam9x60).
- read in the serial memory, and particularly a memory data,
TFRTYP must be written to '1' (both sama5d2 and sam9x60).
- write in the serial memory, but not a memory data, for example
writing the configuration or the QSPI_SR, TFRTYP must be written
to '2' for sama5d2 and to '0' for sam9x60.
- write in the serial memory in particular to program a memory data,
TFRTYP must be written to '3' for sama5d2 and to '1' for sam9x60.
Fix the setting of the QSPI_IFR.TFRTYP field.
Fixes: 2d30ac5ed633 ("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver")
Cc: <stable@vger.kernel.org> # v5.0+
Reported-by: Tom Burkart <tom@aussec.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201207135959.154124-2-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
| -rw-r--r-- | drivers/spi/atmel-quadspi.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 8c009c175f2c..67ef98822366 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -365,10 +365,14 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq, if (dummy_cycles) ifr |= QSPI_IFR_NBDUM(dummy_cycles); - /* Set data enable */ - if (op->data.nbytes) + /* Set data enable and data transfer type. */ + if (op->data.nbytes) { ifr |= QSPI_IFR_DATAEN; + if (op->addr.nbytes) + ifr |= QSPI_IFR_TFRTYP_MEM; + } + /* * If the QSPI controller is set in regular SPI mode, set it in * Serial Memory Mode (SMM). @@ -393,7 +397,7 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq, atmel_qspi_write(icr, aq, QSPI_WICR); atmel_qspi_write(ifr, aq, QSPI_IFR); } else { - if (op->data.dir == SPI_MEM_DATA_OUT) + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; /* Set QSPI Instruction Frame registers */ |