diff options
| author | Ioana Ciornei <ioana.ciornei@nxp.com> | 2021-01-08 11:07:26 +0200 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-01-09 16:21:30 -0800 |
| commit | ca763340763910fa895da2c3fb3c824f9d26826c (patch) | |
| tree | f8a68a45e39e02b4fc96c28bea48d5d379f24611 | |
| parent | 47325da28ef137fa04a0e5d6d244e9635184bf5e (diff) | |
dpaa2-mac: remove an unnecessary check
The dpaa2-eth driver has phylink integration only if the connected dpmac
object is in TYPE_PHY (aka the PCS/PHY etc link status is managed by
Linux instead of the firmware). The check is thus unnecessary because
the code path that reaches the .mac_link_up() callback is only with
TYPE_PHY dpmac objects.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 43 |
1 files changed, 19 insertions, 24 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c index 81b2822a7dc9..3869c38f3979 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -174,30 +174,25 @@ static void dpaa2_mac_link_up(struct phylink_config *config, dpmac_state->up = 1; - if (mac->if_link_type == DPMAC_LINK_TYPE_PHY) { - /* If the DPMAC is configured for PHY mode, we need - * to pass the link parameters to the MC firmware. - */ - dpmac_state->rate = speed; - - if (duplex == DUPLEX_HALF) - dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX; - else if (duplex == DUPLEX_FULL) - dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX; - - /* This is lossy; the firmware really should take the pause - * enablement status rather than pause/asym pause status. - */ - if (rx_pause) - dpmac_state->options |= DPMAC_LINK_OPT_PAUSE; - else - dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE; - - if (rx_pause ^ tx_pause) - dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE; - else - dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE; - } + dpmac_state->rate = speed; + + if (duplex == DUPLEX_HALF) + dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX; + else if (duplex == DUPLEX_FULL) + dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX; + + /* This is lossy; the firmware really should take the pause + * enablement status rather than pause/asym pause status. + */ + if (rx_pause) + dpmac_state->options |= DPMAC_LINK_OPT_PAUSE; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE; + + if (rx_pause ^ tx_pause) + dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE; err = dpmac_set_link_state(mac->mc_io, 0, mac->mc_dev->mc_handle, dpmac_state); |