diff options
| author | françois romieu <romieu@fr.zoreil.com> | 2011-12-04 20:30:52 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2011-12-05 18:31:42 -0500 |
| commit | c7c2c39be8ed4e503e987151f4599455060e219a (patch) | |
| tree | 19104da1775a78e824ff50bda26495797af77553 | |
| parent | 811fd3010cf512f2e23e6c4c912aad54516dc706 (diff) | |
r8169: fix Rx index race between FIFO overflow recovery and NAPI handler.
Since 92fc43b4159b518f5baae57301f26d770b0834c9, rtl8169_tx_timeout ends up
resetting Rx and Tx indexes and thus racing with the NAPI handler via
-> rtl8169_hw_reset
-> rtl_hw_reset
-> rtl8169_init_ring_indexes
What about returning to the original state ?
rtl_hw_reset is only used by rtl8169_hw_reset and rtl8169_init_one.
The latter does not need rtl8169_init_ring_indexes because the indexes
still contain their original values from the newly allocated network
device private data area (i.e. 0).
rtl8169_hw_reset is used by:
1. rtl8169_down
Helper for rtl8169_close. rtl8169_open explicitely inits the indexes
anyway.
2. rtl8169_pcierr_interrupt
Indexes are set by rtl8169_reinit_task.
3. rtl8169_interrupt
rtl8169_hw_reset is needed when the device goes down. See 1.
4. rtl_shutdown
System shutdown handler. Indexes are irrelevant.
5. rtl8169_reset_task
Indexes must be set before rtl_hw_start is called.
6. rtl8169_tx_timeout
Indexes should not be set. This is the job of rtl8169_reset_task anyway.
The removal of rtl8169_hw_reset in rtl8169_tx_timeout and its move in
rtl8169_reset_task do not change the analysis.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/ethernet/realtek/r8169.c | 11 |
1 files changed, 3 insertions, 8 deletions
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a1e3a69f193..67bf07819992 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3935,8 +3935,6 @@ static void rtl_hw_reset(struct rtl8169_private *tp) break; udelay(100); } - - rtl8169_init_ring_indexes(tp); } static int __devinit @@ -5395,14 +5393,16 @@ static void rtl8169_reset_task(struct work_struct *work) if (!netif_running(dev)) goto out_unlock; + rtl8169_hw_reset(tp); + rtl8169_wait_for_quiescence(dev); for (i = 0; i < NUM_RX_DESC; i++) rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz); rtl8169_tx_clear(tp); + rtl8169_init_ring_indexes(tp); - rtl8169_hw_reset(tp); rtl_hw_start(dev); netif_wake_queue(dev); rtl8169_check_link_status(dev, tp, tp->mmio_addr); @@ -5413,11 +5413,6 @@ out_unlock: static void rtl8169_tx_timeout(struct net_device *dev) { - struct rtl8169_private *tp = netdev_priv(dev); - - rtl8169_hw_reset(tp); - - /* Let's wait a bit while any (async) irq lands on */ rtl8169_schedule_work(dev, rtl8169_reset_task); } |