scsi: g_NCR5380: Remove deprecated __setup

Remove deprecated __setup for parsing command line parameters.
g_NCR5380.* parameters could be used instead.

This might break existing setups with g_NCR5380 built-in (if there are
any). But it has to go in order to remove the overrides[] array.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

2 files changed, 0 insertions, 145 deletions

diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
index fd880150aeea..843cbae88ebb 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.txt
@@ -21,16 +21,6 @@ NCR53c400 card, the Trantor T130B in its default configuration:
 The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
 supported by the driver.
 
-If the default configuration does not work for you, you can use the kernel
-command lines (eg using the lilo append command):
-	ncr5380=addr,irq
-	ncr53c400=addr,irq
-	ncr53c400a=addr,irq
-	dtc3181e=addr,irq
-
-The driver does not probe for any addresses or ports other than those in
-the OVERRIDE or given to the kernel as above.
-
 This driver provides some information on what it has detected in
 /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
 time. More info to come in the future.
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 516bd6c4f442..7e50b44eb36a 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -56,136 +56,6 @@ static struct override {
 
 #define NO_OVERRIDES ARRAY_SIZE(overrides)
 
-#ifndef MODULE
-
-/**
- *	internal_setup		-	handle lilo command string override
- *	@board:	BOARD_* identifier for the board
- *	@str: unused
- *	@ints: numeric parameters
- *
- * 	Do LILO command line initialization of the overrides array. Display
- *	errors when needed
- *
- *	Locks: none
- */
-
-static void __init internal_setup(int board, char *str, int *ints)
-{
-	static int commandline_current;
-	switch (board) {
-	case BOARD_NCR5380:
-		if (ints[0] != 2 && ints[0] != 3) {
-			printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
-			return;
-		}
-		break;
-	case BOARD_NCR53C400:
-		if (ints[0] != 2) {
-			printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
-			return;
-		}
-		break;
-	case BOARD_NCR53C400A:
-		if (ints[0] != 2) {
-			printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
-			return;
-		}
-		break;
-	case BOARD_DTC3181E:
-		if (ints[0] != 2) {
-			printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
-			return;
-		}
-		break;
-	}
-
-	if (commandline_current < NO_OVERRIDES) {
-		overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
-		overrides[commandline_current].irq = ints[2];
-		if (ints[0] == 3)
-			overrides[commandline_current].dma = ints[3];
-		else
-			overrides[commandline_current].dma = DMA_NONE;
-		overrides[commandline_current].board = board;
-		++commandline_current;
-	}
-}
-
-
-/**
- * 	do_NCR53C80_setup		-	set up entry point
- *	@str: unused
- *
- *	Setup function invoked at boot to parse the ncr5380= command
- *	line.
- */
-
-static int __init do_NCR5380_setup(char *str)
-{
-	int ints[10];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-	internal_setup(BOARD_NCR5380, str, ints);
-	return 1;
-}
-
-/**
- * 	do_NCR53C400_setup		-	set up entry point
- *	@str: unused
- *	@ints: integer parameters from kernel setup code
- *
- *	Setup function invoked at boot to parse the ncr53c400= command
- *	line.
- */
-
-static int __init do_NCR53C400_setup(char *str)
-{
-	int ints[10];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-	internal_setup(BOARD_NCR53C400, str, ints);
-	return 1;
-}
-
-/**
- * 	do_NCR53C400A_setup	-	set up entry point
- *	@str: unused
- *	@ints: integer parameters from kernel setup code
- *
- *	Setup function invoked at boot to parse the ncr53c400a= command
- *	line.
- */
-
-static int __init do_NCR53C400A_setup(char *str)
-{
-	int ints[10];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-	internal_setup(BOARD_NCR53C400A, str, ints);
-	return 1;
-}
-
-/**
- * 	do_DTC3181E_setup	-	set up entry point
- *	@str: unused
- *	@ints: integer parameters from kernel setup code
- *
- *	Setup function invoked at boot to parse the dtc3181e= command
- *	line.
- */
-
-static int __init do_DTC3181E_setup(char *str)
-{
-	int ints[10];
-
-	get_options(str, ARRAY_SIZE(ints), ints);
-	internal_setup(BOARD_DTC3181E, str, ints);
-	return 1;
-}
-
-#endif
-
 #ifndef SCSI_G_NCR5380_MEM
 /*
  * Configure I/O address of 53C400A or DTC436 by writing magic numbers
@@ -741,8 +611,3 @@ static struct isapnp_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(isapnp, id_table);
 #endif
-
-__setup("ncr5380=", do_NCR5380_setup);
-__setup("ncr53c400=", do_NCR53C400_setup);
-__setup("ncr53c400a=", do_NCR53C400A_setup);
-__setup("dtc3181e=", do_DTC3181E_setup);