Merge tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

DaVinci Device-Tree updates for v4.19
-------------------------------------

* DA850 now uses clocks from device-tree
* DA850 EVM gains LCD (with backlight) and SATA support
* Lego Mindstorms gains bluetooth support
* DSP reset control support on DA850

* tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: Add power-domains to CPPI 4.1 node
  ARM: davinci: dts: add a reset control to the dsp node
  ARM: davinci: dts: make psc0 a reset provider
  ARM: dts: da850-lego-ev3: Add Bluetooth nodes
  ARM: dts: da850: Add power-domains to PWM nodes
  ARM: dts: da850: Add clocks
  dt-bindings: timer: new bindings for TI DaVinci timer
  ARM: dts: da850-evm: Enable LCD and backlight
  ARM: dts: da850-evm: Enable SATA port

Signed-off-by: Olof Johansson <olof@lixom.net>

6 files changed, 402 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 000000000000..29bf91ccf5b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+		   "cmpint7" ("cmpintX" may be omitted if not present in the
+		   hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+	clocksource: timer@20000 {
+		compatible = "ti,da830-timer";
+		reg = <0x20000 0x1000>;
+		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+			     <80>, <81>;
+		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+				  "cmpint6", "cmpint7";
+		clocks = <&pll0_auxclk>;
+	};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 14dff3e188ed..0102ffc5aa53 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -35,6 +35,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &edma0 {
 	ti,edma-reserved-slot-ranges = <32 50>;
 };
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 0e82bb988fde..f9b757905845 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -27,6 +27,65 @@
 		spi0 = &spi1;
 	};
 
+	backlight: backlight-pwm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+		power-supply = <&backlight_lcd>;
+		compatible = "pwm-backlight";
+		/*
+		 * The PWM here corresponds to production hardware. The
+		 * schematic needs to be 1015171 (15 March 2010), Rev A
+		 * or newer.
+		 */
+		pwms = <&ecap2 0 50000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		/*
+		 * The vpif and the LCD are mutually exclusive.
+		 * To enable VPIF, change the status below to 'disabled' then
+		 * then change the status of the vpif below to 'okay'
+		 */
+		status = "okay";
+		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <16>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <4>;
+				vsync-len = <11>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
 	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -35,6 +94,15 @@
 		regulator-boot-on;
 	};
 
+	backlight_lcd: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_backlight_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+		enable-active-high;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "DA850/OMAP-L138 EVM";
@@ -63,6 +131,14 @@
 	};
 };
 
+&ecap2 {
+	status = "okay";
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -93,6 +169,10 @@
 	};
 };
 
+&sata {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -109,6 +189,10 @@
 	status = "okay";
 };
 
+&lcdc {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
@@ -336,5 +420,10 @@
 &vpif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
-	status = "okay";
+	/*
+	 * The vpif and the LCD are mutually exclusive.
+	 * To enable VPIF, disable the ti,tilcdc,panel then
+	 * change the status below to 'okay'
+	 */
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0edf769ea95c..0177e3ed20fe 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -123,6 +123,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -175,6 +179,11 @@
 	status = "okay";
 };
 
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index ee3932475ce7..c4729d0e6c19 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -173,6 +173,15 @@
 		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
 	};
 
+	bt_slow_clk: bt-clock {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&ecap2 0 30518 0>;
+	};
+
 	/* ARM local RAM */
 	memory@ffff0000 {
 		compatible = "syscon", "simple-mfd";
@@ -191,6 +200,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -212,6 +225,20 @@
 			bias-disable;
 		};
 	};
+
+	bt_clock_bias: bt-clock-bias-groups {
+		disable {
+			groups = "cp2";
+			bias-disable;
+		};
+	};
+
+	bt_pic_bias: bt-pic-bias-groups {
+		disable {
+			groups = "cp20";
+			bias-disable;
+		};
+	};
 };
 
 /* Input port 1 */
@@ -221,6 +248,22 @@
 	pinctrl-0 = <&serial1_rxtx_pins>;
 };
 
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,cc2560";
+		clocks = <&bt_slow_clk>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		nvmem-cells = <&bdaddr>;
+		nvmem-cell-names = "bd-address";
+	};
+};
+
 &rtc0 {
 	status = "okay";
 };
@@ -239,6 +282,12 @@
 		pagesize = <64>;
 		read-only;
 		reg = <0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bdaddr: bdaddr@3f06 {
+			reg = <0x3f06 0x06>;
+		};
 	};
 };
 
@@ -323,6 +372,10 @@
 	};
 };
 
+&ecap2 {
+	status = "okay";
+};
+
 &ehrpwm0 {
 	status = "okay";
 };
@@ -336,6 +389,39 @@
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
+
+	/* Don't impede Bluetooth clock signal */
+	bt_clock_en {
+		gpio-hog;
+		gpios = <5 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+
+	/*
+	 * There is a PIC microcontroller for interfacing with an Apple MFi
+	 * chip. This interferes with normal Bluetooth operation, so we need
+	 * to make sure it is turned off. Note: The publicly available
+	 * schematics from LEGO don't show that these pins are connected to
+	 * anything, but they are present in the source code from LEGO.
+	 */
+
+	bt_pic_en {
+		gpio-hog;
+		gpios = <51 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	bt_pic_rst {
+		gpio-hog;
+		gpios = <78 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	bt_pic_cts {
+		gpio-hog;
+		gpios = <87 GPIO_ACTIVE_HIGH>;
+		input;
+	};
 };
 
 &usb_phy {
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 0f4f817a9e22..47aa53ba6b92 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -32,6 +32,25 @@
 			reg = <0xfffee000 0x2000>;
 		};
 	};
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
 	dsp: dsp@11800000 {
 		compatible = "ti,da850-dsp";
 		reg = <0x11800000 0x40000>,
@@ -42,6 +61,8 @@
 		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
 		interrupt-parent = <&intc>;
 		interrupts = <28>;
+		clocks = <&psc0 15>;
+		resets = <&psc0 15>;
 		status = "disabled";
 	};
 	soc@1c00000 {
@@ -52,6 +73,38 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
@@ -281,8 +334,41 @@
 			usb_phy: usb-phy {
 				compatible = "ti,da830-usb-phy";
 				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
 				status = "disabled";
 			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
 		};
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
@@ -294,18 +380,21 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
 		};
 		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
 		};
 		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
 		};
 		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
@@ -317,12 +406,14 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
 		};
 		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
 		};
 		serial0: serial@42000 {
 			compatible = "ti,da830-uart", "ns16550a";
@@ -330,6 +421,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
 			status = "disabled";
 		};
 		serial1: serial@10c000 {
@@ -338,6 +431,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
 			status = "disabled";
 		};
 		serial2: serial@10d000 {
@@ -346,6 +441,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
 			status = "disabled";
 		};
 		rtc0: rtc@23000 {
@@ -353,6 +450,8 @@
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
 			status = "disabled";
 		};
 		i2c0: i2c@22000 {
@@ -361,6 +460,7 @@
 			interrupts = <15>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		i2c1: i2c@228000 {
@@ -369,11 +469,21 @@
 			interrupts = <51>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
 			status = "disabled";
 		};
+		clocksource: timer@20000 {
+			compatible = "ti,da830-timer";
+			reg = <0x20000 0x1000>;
+			interrupts = <12>, <13>;
+			interrupt-names = "tint12", "tint34";
+			clocks = <&pll0_auxclk>;
+		};
 		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		mmc0: mmc@40000 {
@@ -384,12 +494,14 @@
 			interrupts = <16>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
 			status = "disabled";
 		};
 		vpif: video@217000 {
 			compatible = "ti,da850-vpif";
 			reg = <0x217000 0x1000>;
 			interrupts = <92>;
+			power-domains = <&psc1 9>;
 			status = "disabled";
 
 			/* VPIF capture port */
@@ -412,6 +524,7 @@
 			interrupts = <72>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
@@ -419,6 +532,9 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
@@ -426,6 +542,9 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
@@ -433,6 +552,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
@@ -440,6 +562,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
@@ -447,6 +572,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		spi0: spi@41000 {
@@ -459,6 +587,8 @@
 			interrupts = <20>;
 			dmas = <&edma0 14 0>, <&edma0 15 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
 			status = "disabled";
 		};
 		spi1: spi@30e000 {
@@ -471,6 +601,8 @@
 			interrupts = <56>;
 			dmas = <&edma0 18 0>, <&edma0 19 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
 			status = "disabled";
 		};
 		usb0: usb@200000 {
@@ -482,6 +614,8 @@
 			dr_mode = "otg";
 			phys = <&usb_phy 0>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
 			status = "disabled";
 
 			#address-cells = <1>;
@@ -505,6 +639,7 @@
 				interrupts = <58>;
 				#dma-cells = <2>;
 				#dma-channels = <4>;
+				power-domains = <&psc1 1>;
 				status = "okay";
 			};
 		};
@@ -512,13 +647,31 @@
 			compatible = "ti,da850-ahci";
 			reg = <0x218000 0x2000>, <0x22c018 0x4>;
 			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
 			status = "disabled";
 		};
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		eth0: ethernet@220000 {
@@ -534,6 +687,8 @@
 					35
 					36
 					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		usb1: usb@225000 {
@@ -542,6 +697,7 @@
 			interrupts = <59>;
 			phys = <&usb_phy 1>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
 			status = "disabled";
 		};
 		gpio: gpio@226000 {
@@ -552,6 +708,8 @@
 			interrupts = <42 43 44 45 46 47 48 49 50>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
 			status = "disabled";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -700,6 +858,17 @@
 				      <&pmx_core 142 147 1>,
 				      <&pmx_core 143 146 1>;
 		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
 		pinconf: pin-controller@22c00c {
 			compatible = "ti,da850-pupd";
 			reg = <0x22c00c 0x8>;
@@ -713,6 +882,7 @@
 			reg-names = "mpu", "dat";
 			interrupts = <54>;
 			interrupt-names = "common";
+			power-domains = <&psc1 7>;
 			status = "disabled";
 			dmas = <&edma0 1 1>,
 				<&edma0 0 1>;
@@ -724,6 +894,9 @@
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
 			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
 			status = "disabled";
 		};
 	};
@@ -735,6 +908,9 @@
 		reg = <0x68000000 0x00008000>;
 		ranges = <0 0 0x60000000 0x08000000
 			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
 		status = "disabled";
 	};
 	memctrl: memory-controller@b0000000 {