Merge tag 'sh-pfc-for-v4.20-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v4.20 (take three)

  - Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033)
    SoCs,
  - Add INTC-EX pin groups on R-Car E3.

6 files changed, 1315 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
new file mode 100644
index 000000000000..25e53acd523e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
@@ -0,0 +1,153 @@
+Renesas RZ/N1 SoC Pinctrl node description.
+
+Pin controller node
+-------------------
+Required properties:
+- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl"
+  followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible
+  strings must be one of:
+	"renesas,r9a06g032-pinctrl" for RZ/N1D
+	"renesas,r9a06g033-pinctrl" for RZ/N1S
+- reg: Address base and length of the memory area where the pin controller
+  hardware is mapped to.
+- clocks: phandle for the clock, see the description of clock-names below.
+- clock-names: Contains the name of the clock:
+    "bus", the bus clock, sometimes described as pclk, for register accesses.
+
+Example:
+	pinctrl: pin-controller@40067000 {
+	    compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+	    reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+	    clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+	    clock-names = "bus";
+	};
+
+Sub-nodes
+---------
+
+The child nodes of the pin controller node describe a pin multiplexing
+function.
+
+- Pin multiplexing sub-nodes:
+  A pin multiplexing sub-node describes how to configure a set of
+  (or a single) pin in some desired alternate function mode.
+  A single sub-node may define several pin configurations.
+  Please refer to pinctrl-bindings.txt to get to know more on generic
+  pin properties usage.
+
+  The allowed generic formats for a pin multiplexing sub-node are the
+  following ones:
+
+  node-1 {
+      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+      GENERIC_PINCONFIG;
+  };
+
+  node-2 {
+      sub-node-1 {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+
+      sub-node-2 {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+
+      ...
+
+      sub-node-n {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+  };
+
+  node-3 {
+      pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+      GENERIC_PINCONFIG;
+
+      sub-node-1 {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+
+      ...
+
+      sub-node-n {
+          pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ;
+          GENERIC_PINCONFIG;
+      };
+  };
+
+  Use the latter two formats when pins part of the same logical group need to
+  have different generic pin configuration flags applied. Note that the generic
+  pinconfig in node-3 does not apply to the sub-nodes.
+
+  Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle
+  of the most external one.
+
+  Eg.
+
+  client-1 {
+      ...
+      pinctrl-0 = <&node-1>;
+      ...
+  };
+
+  client-2 {
+      ...
+      pinctrl-0 = <&node-2>;
+      ...
+  };
+
+  Required properties:
+    - pinmux:
+      integer array representing pin number and pin multiplexing configuration.
+      When a pin has to be configured in alternate function mode, use this
+      property to identify the pin by its global index, and provide its
+      alternate function configuration number along with it.
+      When multiple pins are required to be configured as part of the same
+      alternate function they shall be specified as members of the same
+      argument list of a single "pinmux" property.
+      Integers values in the "pinmux" argument list are assembled as:
+      (PIN | MUX_FUNC << 8)
+      where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is
+      one of the alternate function identifiers defined in:
+      <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+      These identifiers collapse the IO Multiplex Configuration Level 1 and
+      Level 2 numbers that are detailed in the hardware reference manual into a
+      single number. The identifiers for Level 2 are simply offset by 10.
+      Additional identifiers are provided to specify the MDIO source peripheral.
+
+  Optional generic pinconf properties:
+    - bias-disable		- disable any pin bias
+    - bias-pull-up		- pull up the pin with 50 KOhm
+    - bias-pull-down		- pull down the pin with 50 KOhm
+    - bias-high-impedance	- high impedance mode
+    - drive-strength		- sink or source at most 4, 6, 8 or 12 mA
+
+  Example:
+  A serial communication interface with a TX output pin and an RX input pin.
+
+  &pinctrl {
+	pins_uart0: pins_uart0 {
+		pinmux = <
+			RZN1_PINMUX(103, RZN1_FUNC_UART0_I)	/* UART0_TXD */
+			RZN1_PINMUX(104, RZN1_FUNC_UART0_I)	/* UART0_RXD */
+		>;
+	};
+  };
+
+  Example 2:
+  Here we set the pull up on the RXD pin of the UART.
+
+  &pinctrl {
+	pins_uart0: pins_uart0 {
+		pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;	/* TXD */
+
+		pins_uart6_rx {
+			pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */
+			bias-pull-up;
+		};
+	};
+  };
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 978b2ed4d014..4d8c00eac742 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -195,6 +195,16 @@ config PINCTRL_RZA1
 	help
 	  This selects pinctrl driver for Renesas RZ/A1 platforms.
 
+config PINCTRL_RZN1
+	bool "Renesas RZ/N1 pinctrl driver"
+	depends on OF
+	depends on ARCH_RZN1 || COMPILE_TEST
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  This selects pinctrl driver for Renesas RZ/N1 devices.
+
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 8e127bd8610f..18a13c1e2c21 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl-pic32.o
 obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
 obj-$(CONFIG_PINCTRL_RZA1)	+= pinctrl-rza1.o
+obj-$(CONFIG_PINCTRL_RZN1)	+= pinctrl-rzn1.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= sirf/
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
diff --git a/drivers/pinctrl/pinctrl-rzn1.c b/drivers/pinctrl/pinctrl-rzn1.c
new file mode 100644
index 000000000000..ce05e3a00be2
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rzn1.c
@@ -0,0 +1,948 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2018 Renesas Electronics Europe Limited
+ *
+ * Phil Edworthy <phil.edworthy@renesas.com>
+ * Based on a driver originally written by Michel Pollet at Renesas.
+ */
+
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+/* Field positions and masks in the pinmux registers */
+#define RZN1_L1_PIN_DRIVE_STRENGTH	10
+#define RZN1_L1_PIN_DRIVE_STRENGTH_4MA	0
+#define RZN1_L1_PIN_DRIVE_STRENGTH_6MA	1
+#define RZN1_L1_PIN_DRIVE_STRENGTH_8MA	2
+#define RZN1_L1_PIN_DRIVE_STRENGTH_12MA	3
+#define RZN1_L1_PIN_PULL		8
+#define RZN1_L1_PIN_PULL_NONE		0
+#define RZN1_L1_PIN_PULL_UP		1
+#define RZN1_L1_PIN_PULL_DOWN		3
+#define RZN1_L1_FUNCTION		0
+#define RZN1_L1_FUNC_MASK		0xf
+#define RZN1_L1_FUNCTION_L2		0xf
+
+/*
+ * The hardware manual describes two levels of multiplexing, but it's more
+ * logical to think of the hardware as three levels, with level 3 consisting of
+ * the multiplexing for Ethernet MDIO signals.
+ *
+ * Level 1 functions go from 0 to 9, with level 1 function '15' (0xf) specifying
+ * that level 2 functions are used instead. Level 2 has a lot more options,
+ * going from 0 to 61. Level 3 allows selection of MDIO functions which can be
+ * floating, or one of seven internal peripherals. Unfortunately, there are two
+ * level 2 functions that can select MDIO, and two MDIO channels so we have four
+ * sets of level 3 functions.
+ *
+ * For this driver, we've compounded the numbers together, so:
+ *    0 to   9 is level 1
+ *   10 to  71 is 10 + level 2 number
+ *   72 to  79 is 72 + MDIO0 source for level 2 MDIO function.
+ *   80 to  87 is 80 + MDIO0 source for level 2 MDIO_E1 function.
+ *   88 to  95 is 88 + MDIO1 source for level 2 MDIO function.
+ *   96 to 103 is 96 + MDIO1 source for level 2 MDIO_E1 function.
+ * Examples:
+ *  Function 28 corresponds UART0
+ *  Function 73 corresponds to MDIO0 to GMAC0
+ *
+ * There are 170 configurable pins (called PL_GPIO in the datasheet).
+ */
+
+/*
+ * Structure detailing the HW registers on the RZ/N1 devices.
+ * Both the Level 1 mux registers and Level 2 mux registers have the same
+ * structure. The only difference is that Level 2 has additional MDIO registers
+ * at the end.
+ */
+struct rzn1_pinctrl_regs {
+	u32	conf[170];
+	u32	pad0[86];
+	u32	status_protect;	/* 0x400 */
+	/* MDIO mux registers, level2 only */
+	u32	l2_mdio[2];
+};
+
+/**
+ * struct rzn1_pmx_func - describes rzn1 pinmux functions
+ * @name: the name of this specific function
+ * @groups: corresponding pin groups
+ * @num_groups: the number of groups
+ */
+struct rzn1_pmx_func {
+	const char *name;
+	const char **groups;
+	unsigned int num_groups;
+};
+
+/**
+ * struct rzn1_pin_group - describes an rzn1 pin group
+ * @name: the name of this specific pin group
+ * @func: the name of the function selected by this group
+ * @npins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ * @pins: array of pins. Needed due to pinctrl_ops.get_group_pins()
+ * @pin_ids: array of pin_ids, i.e. the value used to select the mux
+ */
+struct rzn1_pin_group {
+	const char *name;
+	const char *func;
+	unsigned int npins;
+	unsigned int *pins;
+	u8 *pin_ids;
+};
+
+struct rzn1_pinctrl {
+	struct device *dev;
+	struct clk *clk;
+	struct pinctrl_dev *pctl;
+	struct rzn1_pinctrl_regs __iomem *lev1;
+	struct rzn1_pinctrl_regs __iomem *lev2;
+	u32 lev1_protect_phys;
+	u32 lev2_protect_phys;
+	u32 mdio_func[2];
+
+	struct rzn1_pin_group *groups;
+	unsigned int ngroups;
+
+	struct rzn1_pmx_func *functions;
+	unsigned int nfunctions;
+};
+
+#define RZN1_PINS_PROP "pinmux"
+
+#define RZN1_PIN(pin) PINCTRL_PIN(pin, "pl_gpio"#pin)
+
+static const struct pinctrl_pin_desc rzn1_pins[] = {
+	RZN1_PIN(0), RZN1_PIN(1), RZN1_PIN(2), RZN1_PIN(3), RZN1_PIN(4),
+	RZN1_PIN(5), RZN1_PIN(6), RZN1_PIN(7), RZN1_PIN(8), RZN1_PIN(9),
+	RZN1_PIN(10), RZN1_PIN(11), RZN1_PIN(12), RZN1_PIN(13), RZN1_PIN(14),
+	RZN1_PIN(15), RZN1_PIN(16), RZN1_PIN(17), RZN1_PIN(18), RZN1_PIN(19),
+	RZN1_PIN(20), RZN1_PIN(21), RZN1_PIN(22), RZN1_PIN(23), RZN1_PIN(24),
+	RZN1_PIN(25), RZN1_PIN(26), RZN1_PIN(27), RZN1_PIN(28), RZN1_PIN(29),
+	RZN1_PIN(30), RZN1_PIN(31), RZN1_PIN(32), RZN1_PIN(33), RZN1_PIN(34),
+	RZN1_PIN(35), RZN1_PIN(36), RZN1_PIN(37), RZN1_PIN(38), RZN1_PIN(39),
+	RZN1_PIN(40), RZN1_PIN(41), RZN1_PIN(42), RZN1_PIN(43), RZN1_PIN(44),
+	RZN1_PIN(45), RZN1_PIN(46), RZN1_PIN(47), RZN1_PIN(48), RZN1_PIN(49),
+	RZN1_PIN(50), RZN1_PIN(51), RZN1_PIN(52), RZN1_PIN(53), RZN1_PIN(54),
+	RZN1_PIN(55), RZN1_PIN(56), RZN1_PIN(57), RZN1_PIN(58), RZN1_PIN(59),
+	RZN1_PIN(60), RZN1_PIN(61), RZN1_PIN(62), RZN1_PIN(63), RZN1_PIN(64),
+	RZN1_PIN(65), RZN1_PIN(66), RZN1_PIN(67), RZN1_PIN(68), RZN1_PIN(69),
+	RZN1_PIN(70), RZN1_PIN(71), RZN1_PIN(72), RZN1_PIN(73), RZN1_PIN(74),
+	RZN1_PIN(75), RZN1_PIN(76), RZN1_PIN(77), RZN1_PIN(78), RZN1_PIN(79),
+	RZN1_PIN(80), RZN1_PIN(81), RZN1_PIN(82), RZN1_PIN(83), RZN1_PIN(84),
+	RZN1_PIN(85), RZN1_PIN(86), RZN1_PIN(87), RZN1_PIN(88), RZN1_PIN(89),
+	RZN1_PIN(90), RZN1_PIN(91), RZN1_PIN(92), RZN1_PIN(93), RZN1_PIN(94),
+	RZN1_PIN(95), RZN1_PIN(96), RZN1_PIN(97), RZN1_PIN(98), RZN1_PIN(99),
+	RZN1_PIN(100), RZN1_PIN(101), RZN1_PIN(102), RZN1_PIN(103),
+	RZN1_PIN(104), RZN1_PIN(105), RZN1_PIN(106), RZN1_PIN(107),
+	RZN1_PIN(108), RZN1_PIN(109), RZN1_PIN(110), RZN1_PIN(111),
+	RZN1_PIN(112), RZN1_PIN(113), RZN1_PIN(114), RZN1_PIN(115),
+	RZN1_PIN(116), RZN1_PIN(117), RZN1_PIN(118), RZN1_PIN(119),
+	RZN1_PIN(120), RZN1_PIN(121), RZN1_PIN(122), RZN1_PIN(123),
+	RZN1_PIN(124), RZN1_PIN(125), RZN1_PIN(126), RZN1_PIN(127),
+	RZN1_PIN(128), RZN1_PIN(129), RZN1_PIN(130), RZN1_PIN(131),
+	RZN1_PIN(132), RZN1_PIN(133), RZN1_PIN(134), RZN1_PIN(135),
+	RZN1_PIN(136), RZN1_PIN(137), RZN1_PIN(138), RZN1_PIN(139),
+	RZN1_PIN(140), RZN1_PIN(141), RZN1_PIN(142), RZN1_PIN(143),
+	RZN1_PIN(144), RZN1_PIN(145), RZN1_PIN(146), RZN1_PIN(147),
+	RZN1_PIN(148), RZN1_PIN(149), RZN1_PIN(150), RZN1_PIN(151),
+	RZN1_PIN(152), RZN1_PIN(153), RZN1_PIN(154), RZN1_PIN(155),
+	RZN1_PIN(156), RZN1_PIN(157), RZN1_PIN(158), RZN1_PIN(159),
+	RZN1_PIN(160), RZN1_PIN(161), RZN1_PIN(162), RZN1_PIN(163),
+	RZN1_PIN(164), RZN1_PIN(165), RZN1_PIN(166), RZN1_PIN(167),
+	RZN1_PIN(168), RZN1_PIN(169),
+};
+
+enum {
+	LOCK_LEVEL1 = 0x1,
+	LOCK_LEVEL2 = 0x2,
+	LOCK_ALL = LOCK_LEVEL1 | LOCK_LEVEL2,
+};
+
+static void rzn1_hw_set_lock(struct rzn1_pinctrl *ipctl, u8 lock, u8 value)
+{
+	/*
+	 * The pinmux configuration is locked by writing the physical address of
+	 * the status_protect register to itself. It is unlocked by writing the
+	 * address | 1.
+	 */
+	if (lock & LOCK_LEVEL1) {
+		u32 val = ipctl->lev1_protect_phys | !(value & LOCK_LEVEL1);
+
+		writel(val, &ipctl->lev1->status_protect);
+	}
+
+	if (lock & LOCK_LEVEL2) {
+		u32 val = ipctl->lev2_protect_phys | !(value & LOCK_LEVEL2);
+
+		writel(val, &ipctl->lev2->status_protect);
+	}
+}
+
+static void rzn1_pinctrl_mdio_select(struct rzn1_pinctrl *ipctl, int mdio,
+				     u32 func)
+{
+	if (ipctl->mdio_func[mdio] >= 0 && ipctl->mdio_func[mdio] != func)
+		dev_warn(ipctl->dev, "conflicting setting for mdio%d!\n", mdio);
+	ipctl->mdio_func[mdio] = func;
+
+	dev_dbg(ipctl->dev, "setting mdio%d to %u\n", mdio, func);
+
+	writel(func, &ipctl->lev2->l2_mdio[mdio]);
+}
+
+/*
+ * Using a composite pin description, set the hardware pinmux registers
+ * with the corresponding values.
+ * Make sure to unlock write protection and reset it afterward.
+ *
+ * NOTE: There is no protection for potential concurrency, it is assumed these
+ * calls are serialized already.
+ */
+static int rzn1_set_hw_pin_func(struct rzn1_pinctrl *ipctl, unsigned int pin,
+				u32 pin_config, u8 use_locks)
+{
+	u32 l1_cache;
+	u32 l2_cache;
+	u32 l1;
+	u32 l2;
+
+	/* Level 3 MDIO multiplexing */
+	if (pin_config >= RZN1_FUNC_MDIO0_HIGHZ &&
+	    pin_config <= RZN1_FUNC_MDIO1_E1_SWITCH) {
+		int mdio_channel;
+		u32 mdio_func;
+
+		if (pin_config <= RZN1_FUNC_MDIO1_HIGHZ)
+			mdio_channel = 0;
+		else
+			mdio_channel = 1;
+
+		/* Get MDIO func, and convert the func to the level 2 number */
+		if (pin_config <= RZN1_FUNC_MDIO0_SWITCH) {
+			mdio_func = pin_config - RZN1_FUNC_MDIO0_HIGHZ;
+			pin_config = RZN1_FUNC_ETH_MDIO;
+		} else if (pin_config <= RZN1_FUNC_MDIO0_E1_SWITCH) {
+			mdio_func = pin_config - RZN1_FUNC_MDIO0_E1_HIGHZ;
+			pin_config = RZN1_FUNC_ETH_MDIO_E1;
+		} else if (pin_config <= RZN1_FUNC_MDIO1_SWITCH) {
+			mdio_func = pin_config - RZN1_FUNC_MDIO1_HIGHZ;
+			pin_config = RZN1_FUNC_ETH_MDIO;
+		} else {
+			mdio_func = pin_config - RZN1_FUNC_MDIO1_E1_HIGHZ;
+			pin_config = RZN1_FUNC_ETH_MDIO_E1;
+		}
+		rzn1_pinctrl_mdio_select(ipctl, mdio_channel, mdio_func);
+	}
+
+	/* Note here, we do not allow anything past the MDIO Mux values */
+	if (pin >= ARRAY_SIZE(ipctl->lev1->conf) ||
+	    pin_config >= RZN1_FUNC_MDIO0_HIGHZ)
+		return -EINVAL;
+
+	l1 = readl(&ipctl->lev1->conf[pin]);
+	l1_cache = l1;
+	l2 = readl(&ipctl->lev2->conf[pin]);
+	l2_cache = l2;
+
+	dev_dbg(ipctl->dev, "setting func for pin %u to %u\n", pin, pin_config);
+
+	l1 &= ~(RZN1_L1_FUNC_MASK << RZN1_L1_FUNCTION);
+
+	if (pin_config < RZN1_FUNC_L2_OFFSET) {
+		l1 |= (pin_config << RZN1_L1_FUNCTION);
+	} else {
+		l1 |= (RZN1_L1_FUNCTION_L2 << RZN1_L1_FUNCTION);
+
+		l2 = pin_config - RZN1_FUNC_L2_OFFSET;
+	}
+
+	/* If either configuration changes, we update both anyway */
+	if (l1 != l1_cache || l2 != l2_cache) {
+		writel(l1, &ipctl->lev1->conf[pin]);
+		writel(l2, &ipctl->lev2->conf[pin]);
+	}
+
+	return 0;
+}
+
+static const struct rzn1_pin_group *rzn1_pinctrl_find_group_by_name(
+	const struct rzn1_pinctrl *ipctl, const char *name)
+{
+	unsigned int i;
+
+	for (i = 0; i < ipctl->ngroups; i++) {
+		if (!strcmp(ipctl->groups[i].name, name))
+			return &ipctl->groups[i];
+	}
+
+	return NULL;
+}
+
+static int rzn1_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ipctl->ngroups;
+}
+
+static const char *rzn1_get_group_name(struct pinctrl_dev *pctldev,
+				       unsigned int selector)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ipctl->groups[selector].name;
+}
+
+static int rzn1_get_group_pins(struct pinctrl_dev *pctldev,
+			       unsigned int selector, const unsigned int **pins,
+			       unsigned int *npins)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= ipctl->ngroups)
+		return -EINVAL;
+
+	*pins = ipctl->groups[selector].pins;
+	*npins = ipctl->groups[selector].npins;
+
+	return 0;
+}
+
+/*
+ * This function is called for each pinctl 'Function' node.
+ * Sub-nodes can be used to describe multiple 'Groups' for the 'Function'
+ * If there aren't any sub-nodes, the 'Group' is essentially the 'Function'.
+ * Each 'Group' uses pinmux = <...> to detail the pins and data used to select
+ * the functionality. Each 'Group' has optional pin configurations that apply
+ * to all pins in the 'Group'.
+ */
+static int rzn1_dt_node_to_map_one(struct pinctrl_dev *pctldev,
+				   struct device_node *np,
+				   struct pinctrl_map **map,
+				   unsigned int *num_maps)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	const struct rzn1_pin_group *grp;
+	unsigned long *configs = NULL;
+	unsigned int reserved_maps = *num_maps;
+	unsigned int num_configs = 0;
+	unsigned int reserve = 1;
+	int ret;
+
+	dev_dbg(ipctl->dev, "processing node %pOF\n", np);
+
+	grp = rzn1_pinctrl_find_group_by_name(ipctl, np->name);
+	if (!grp) {
+		dev_err(ipctl->dev, "unable to find group for node %pOF\n", np);
+
+		return -EINVAL;
+	}
+
+	/* Get the group's pin configuration */
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
+	if (ret < 0) {
+		dev_err(ipctl->dev, "%pOF: could not parse property\n", np);
+
+		return ret;
+	}
+
+	if (num_configs)
+		reserve++;
+
+	/* Increase the number of maps to cover this group */
+	ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps, num_maps,
+					reserve);
+	if (ret < 0)
+		goto out;
+
+	/* Associate the group with the function */
+	ret = pinctrl_utils_add_map_mux(pctldev, map, &reserved_maps, num_maps,
+					grp->name, grp->func);
+	if (ret < 0)
+		goto out;
+
+	if (num_configs) {
+		/* Associate the group's pin configuration with the group */
+		ret = pinctrl_utils_add_map_configs(pctldev, map,
+				&reserved_maps, num_maps, grp->name,
+				configs, num_configs,
+				PIN_MAP_TYPE_CONFIGS_GROUP);
+		if (ret < 0)
+			goto out;
+	}
+
+	dev_dbg(pctldev->dev, "maps: function %s group %s (%d pins)\n",
+		grp->func, grp->name, grp->npins);
+
+out:
+	kfree(configs);
+
+	return ret;
+}
+
+static int rzn1_dt_node_to_map(struct pinctrl_dev *pctldev,
+			       struct device_node *np,
+			       struct pinctrl_map **map,
+			       unsigned int *num_maps)
+{
+	struct device_node *child;
+	int ret;
+
+	*map = NULL;
+	*num_maps = 0;
+
+	ret = rzn1_dt_node_to_map_one(pctldev, np, map, num_maps);
+	if (ret < 0)
+		return ret;
+
+	for_each_child_of_node(np, child) {
+		ret = rzn1_dt_node_to_map_one(pctldev, child, map, num_maps);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinctrl_ops rzn1_pctrl_ops = {
+	.get_groups_count = rzn1_get_groups_count,
+	.get_group_name = rzn1_get_group_name,
+	.get_group_pins = rzn1_get_group_pins,
+	.dt_node_to_map = rzn1_dt_node_to_map,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int rzn1_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ipctl->nfunctions;
+}
+
+static const char *rzn1_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					  unsigned int selector)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ipctl->functions[selector].name;
+}
+
+static int rzn1_pmx_get_groups(struct pinctrl_dev *pctldev,
+			       unsigned int selector,
+			       const char * const **groups,
+			       unsigned int * const num_groups)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = ipctl->functions[selector].groups;
+	*num_groups = ipctl->functions[selector].num_groups;
+
+	return 0;
+}
+
+static int rzn1_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
+			unsigned int group)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	struct rzn1_pin_group *grp = &ipctl->groups[group];
+	unsigned int i, grp_pins = grp->npins;
+
+	dev_dbg(ipctl->dev, "set mux %s(%d) group %s(%d)\n",
+		ipctl->functions[selector].name, selector, grp->name, group);
+
+	rzn1_hw_set_lock(ipctl, LOCK_ALL, LOCK_ALL);
+	for (i = 0; i < grp_pins; i++)
+		rzn1_set_hw_pin_func(ipctl, grp->pins[i], grp->pin_ids[i], 0);
+	rzn1_hw_set_lock(ipctl, LOCK_ALL, 0);
+
+	return 0;
+}
+
+static const struct pinmux_ops rzn1_pmx_ops = {
+	.get_functions_count = rzn1_pmx_get_funcs_count,
+	.get_function_name = rzn1_pmx_get_func_name,
+	.get_function_groups = rzn1_pmx_get_groups,
+	.set_mux = rzn1_set_mux,
+};
+
+static int rzn1_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+			    unsigned long *config)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	const u32 reg_drive[4] = { 4, 6, 8, 12 };
+	u32 pull, drive, l1mux;
+	u32 l1, l2, arg = 0;
+
+	if (pin >= ARRAY_SIZE(ipctl->lev1->conf))
+		return -EINVAL;
+
+	l1 = readl(&ipctl->lev1->conf[pin]);
+
+	l1mux = l1 & RZN1_L1_FUNC_MASK;
+	pull = (l1 >> RZN1_L1_PIN_PULL) & 0x3;
+	drive = (l1 >> RZN1_L1_PIN_DRIVE_STRENGTH) & 0x3;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (pull != RZN1_L1_PIN_PULL_UP)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (pull != RZN1_L1_PIN_PULL_DOWN)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_BIAS_DISABLE:
+		if (pull != RZN1_L1_PIN_PULL_NONE)
+			return -EINVAL;
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		arg = reg_drive[drive];
+		break;
+	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+		l2 = readl(&ipctl->lev2->conf[pin]);
+		if (l1mux == RZN1_L1_FUNCTION_L2) {
+			if (l2 != 0)
+				return -EINVAL;
+		} else if (l1mux != RZN1_FUNC_HIGHZ) {
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+static int rzn1_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+			    unsigned long *configs, unsigned int num_configs)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	unsigned int i;
+	u32 l1, l1_cache;
+	u32 drv;
+	u32 arg;
+
+	if (pin >= ARRAY_SIZE(ipctl->lev1->conf))
+		return -EINVAL;
+
+	l1 = readl(&ipctl->lev1->conf[pin]);
+	l1_cache = l1;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			dev_dbg(ipctl->dev, "set pin %d pull up\n", pin);
+			l1 &= ~(0x3 << RZN1_L1_PIN_PULL);
+			l1 |= (RZN1_L1_PIN_PULL_UP << RZN1_L1_PIN_PULL);
+			break;
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			dev_dbg(ipctl->dev, "set pin %d pull down\n", pin);
+			l1 &= ~(0x3 << RZN1_L1_PIN_PULL);
+			l1 |= (RZN1_L1_PIN_PULL_DOWN << RZN1_L1_PIN_PULL);
+			break;
+		case PIN_CONFIG_BIAS_DISABLE:
+			dev_dbg(ipctl->dev, "set pin %d bias off\n", pin);
+			l1 &= ~(0x3 << RZN1_L1_PIN_PULL);
+			l1 |= (RZN1_L1_PIN_PULL_NONE << RZN1_L1_PIN_PULL);
+			break;
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			dev_dbg(ipctl->dev, "set pin %d drv %umA\n", pin, arg);
+			switch (arg) {
+			case 4:
+				drv = RZN1_L1_PIN_DRIVE_STRENGTH_4MA;
+				break;
+			case 6:
+				drv = RZN1_L1_PIN_DRIVE_STRENGTH_6MA;
+				break;
+			case 8:
+				drv = RZN1_L1_PIN_DRIVE_STRENGTH_8MA;
+				break;
+			case 12:
+				drv = RZN1_L1_PIN_DRIVE_STRENGTH_12MA;
+				break;
+			default:
+				dev_err(ipctl->dev,
+					"Drive strength %umA not supported\n",
+					arg);
+
+				return -EINVAL;
+			}
+
+			l1 &= ~(0x3 << RZN1_L1_PIN_DRIVE_STRENGTH);
+			l1 |= (drv << RZN1_L1_PIN_DRIVE_STRENGTH);
+			break;
+
+		case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+			dev_dbg(ipctl->dev, "set pin %d High-Z\n", pin);
+			l1 &= ~RZN1_L1_FUNC_MASK;
+			l1 |= RZN1_FUNC_HIGHZ;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	}
+
+	if (l1 != l1_cache) {
+		rzn1_hw_set_lock(ipctl, LOCK_LEVEL1, LOCK_LEVEL1);
+		writel(l1, &ipctl->lev1->conf[pin]);
+		rzn1_hw_set_lock(ipctl, LOCK_LEVEL1, 0);
+	}
+
+	return 0;
+}
+
+static int rzn1_pinconf_group_get(struct pinctrl_dev *pctldev,
+				  unsigned int selector,
+				  unsigned long *config)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	struct rzn1_pin_group *grp = &ipctl->groups[selector];
+	unsigned long old = 0;
+	unsigned int i;
+
+	dev_dbg(ipctl->dev, "group get %s selector:%u\n", grp->name, selector);
+
+	for (i = 0; i < grp->npins; i++) {
+		if (rzn1_pinconf_get(pctldev, grp->pins[i], config))
+			return -ENOTSUPP;
+
+		/* configs do not match between two pins */
+		if (i && (old != *config))
+			return -ENOTSUPP;
+
+		old = *config;
+	}
+
+	return 0;
+}
+
+static int rzn1_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned int selector,
+				  unsigned long *configs,
+				  unsigned int num_configs)
+{
+	struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+	struct rzn1_pin_group *grp = &ipctl->groups[selector];
+	unsigned int i;
+	int ret;
+
+	dev_dbg(ipctl->dev, "group set %s selector:%u configs:%p/%d\n",
+		grp->name, selector, configs, num_configs);
+
+	for (i = 0; i < grp->npins; i++) {
+		unsigned int pin = grp->pins[i];
+
+		ret = rzn1_pinconf_set(pctldev, pin, configs, num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct pinconf_ops rzn1_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = rzn1_pinconf_get,
+	.pin_config_set = rzn1_pinconf_set,
+	.pin_config_group_get = rzn1_pinconf_group_get,
+	.pin_config_group_set = rzn1_pinconf_group_set,
+	.pin_config_config_dbg_show = pinconf_generic_dump_config,
+};
+
+static struct pinctrl_desc rzn1_pinctrl_desc = {
+	.pctlops = &rzn1_pctrl_ops,
+	.pmxops = &rzn1_pmx_ops,
+	.confops = &rzn1_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static int rzn1_pinctrl_parse_groups(struct device_node *np,
+				     struct rzn1_pin_group *grp,
+				     struct rzn1_pinctrl *ipctl)
+{
+	const __be32 *list;
+	unsigned int i;
+	int size;
+
+	dev_dbg(ipctl->dev, "%s: %s\n", __func__, np->name);
+
+	/* Initialise group */
+	grp->name = np->name;
+
+	/*
+	 * The binding format is
+	 *	pinmux = <PIN_FUNC_ID CONFIG ...>,
+	 * do sanity check and calculate pins number
+	 */
+	list = of_get_property(np, RZN1_PINS_PROP, &size);
+	if (!list) {
+		dev_err(ipctl->dev,
+			"no " RZN1_PINS_PROP " property in node %pOF\n", np);
+
+		return -EINVAL;
+	}
+
+	if (!size) {
+		dev_err(ipctl->dev, "Invalid " RZN1_PINS_PROP " in node %pOF\n",
+			np);
+
+		return -EINVAL;
+	}
+
+	grp->npins = size / sizeof(list[0]);
+	grp->pin_ids = devm_kmalloc_array(ipctl->dev,
+					  grp->npins, sizeof(grp->pin_ids[0]),
+					  GFP_KERNEL);
+	grp->pins = devm_kmalloc_array(ipctl->dev,
+				       grp->npins, sizeof(grp->pins[0]),
+				       GFP_KERNEL);
+	if (!grp->pin_ids || !grp->pins)
+		return -ENOMEM;
+
+	for (i = 0; i < grp->npins; i++) {
+		u32 pin_id = be32_to_cpu(*list++);
+
+		grp->pins[i] = pin_id & 0xff;
+		grp->pin_ids[i] = (pin_id >> 8) & 0x7f;
+	}
+
+	return grp->npins;
+}
+
+static int rzn1_pinctrl_count_function_groups(struct device_node *np)
+{
+	struct device_node *child;
+	int count = 0;
+
+	if (of_property_count_u32_elems(np, RZN1_PINS_PROP) > 0)
+		count++;
+
+	for_each_child_of_node(np, child) {
+		if (of_property_count_u32_elems(child, RZN1_PINS_PROP) > 0)
+			count++;
+	}
+
+	return count;
+}
+
+static int rzn1_pinctrl_parse_functions(struct device_node *np,
+					struct rzn1_pinctrl *ipctl,
+					unsigned int index)
+{
+	struct rzn1_pmx_func *func;
+	struct rzn1_pin_group *grp;
+	struct device_node *child;
+	unsigned int i = 0;
+	int ret;
+
+	func = &ipctl->functions[index];
+
+	/* Initialise function */
+	func->name = np->name;
+	func->num_groups = rzn1_pinctrl_count_function_groups(np);
+	if (func->num_groups == 0) {
+		dev_err(ipctl->dev, "no groups defined in %pOF\n", np);
+		return -EINVAL;
+	}
+	dev_dbg(ipctl->dev, "function %s has %d groups\n",
+		np->name, func->num_groups);
+
+	func->groups = devm_kmalloc_array(ipctl->dev,
+					  func->num_groups, sizeof(char *),
+					  GFP_KERNEL);
+	if (!func->groups)
+		return -ENOMEM;
+
+	if (of_property_count_u32_elems(np, RZN1_PINS_PROP) > 0) {
+		func->groups[i] = np->name;
+		grp = &ipctl->groups[ipctl->ngroups];
+		grp->func = func->name;
+		ret = rzn1_pinctrl_parse_groups(np, grp, ipctl);
+		if (ret < 0)
+			return ret;
+		i++;
+		ipctl->ngroups++;
+	}
+
+	for_each_child_of_node(np, child) {
+		func->groups[i] = child->name;
+		grp = &ipctl->groups[ipctl->ngroups];
+		grp->func = func->name;
+		ret = rzn1_pinctrl_parse_groups(child, grp, ipctl);
+		if (ret < 0)
+			return ret;
+		i++;
+		ipctl->ngroups++;
+	}
+
+	dev_dbg(ipctl->dev, "function %s parsed %u/%u groups\n",
+		np->name, i, func->num_groups);
+
+	return 0;
+}
+
+static int rzn1_pinctrl_probe_dt(struct platform_device *pdev,
+				 struct rzn1_pinctrl *ipctl)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	unsigned int maxgroups = 0;
+	unsigned int nfuncs = 0;
+	unsigned int i = 0;
+	int ret;
+
+	nfuncs = of_get_child_count(np);
+	if (nfuncs <= 0)
+		return 0;
+
+	ipctl->nfunctions = nfuncs;
+	ipctl->functions = devm_kmalloc_array(&pdev->dev, nfuncs,
+					      sizeof(*ipctl->functions),
+					      GFP_KERNEL);
+	if (!ipctl->functions)
+		return -ENOMEM;
+
+	ipctl->ngroups = 0;
+	for_each_child_of_node(np, child)
+		maxgroups += rzn1_pinctrl_count_function_groups(child);
+
+	ipctl->groups = devm_kmalloc_array(&pdev->dev,
+					   maxgroups,
+					   sizeof(*ipctl->groups),
+					   GFP_KERNEL);
+	if (!ipctl->groups)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		ret = rzn1_pinctrl_parse_functions(child, ipctl, i++);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rzn1_pinctrl_probe(struct platform_device *pdev)
+{
+	struct rzn1_pinctrl *ipctl;
+	struct resource *res;
+	int ret;
+
+	/* Create state holders etc for this driver */
+	ipctl = devm_kzalloc(&pdev->dev, sizeof(*ipctl), GFP_KERNEL);
+	if (!ipctl)
+		return -ENOMEM;
+
+	ipctl->mdio_func[0] = -1;
+	ipctl->mdio_func[1] = -1;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ipctl->lev1_protect_phys = (u32)res->start + 0x400;
+	ipctl->lev1 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ipctl->lev1))
+		return PTR_ERR(ipctl->lev1);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	ipctl->lev2_protect_phys = (u32)res->start + 0x400;
+	ipctl->lev2 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ipctl->lev2))
+		return PTR_ERR(ipctl->lev2);
+
+	ipctl->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ipctl->clk))
+		return PTR_ERR(ipctl->clk);
+	ret = clk_prepare_enable(ipctl->clk);
+	if (ret)
+		return ret;
+
+	ipctl->dev = &pdev->dev;
+	rzn1_pinctrl_desc.name = dev_name(&pdev->dev);
+	rzn1_pinctrl_desc.pins = rzn1_pins;
+	rzn1_pinctrl_desc.npins = ARRAY_SIZE(rzn1_pins);
+
+	ret = rzn1_pinctrl_probe_dt(pdev, ipctl);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to probe dt properties\n");
+		goto err_clk;
+	}
+
+	platform_set_drvdata(pdev, ipctl);
+
+	ret = devm_pinctrl_register_and_init(&pdev->dev, &rzn1_pinctrl_desc,
+					     ipctl, &ipctl->pctl);
+	if (ret) {
+		dev_err(&pdev->dev, "could not register rzn1 pinctrl driver\n");
+		goto err_clk;
+	}
+
+	ret = pinctrl_enable(ipctl->pctl);
+	if (ret)
+		goto err_clk;
+
+	dev_info(&pdev->dev, "probed\n");
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(ipctl->clk);
+
+	return ret;
+}
+
+static int rzn1_pinctrl_remove(struct platform_device *pdev)
+{
+	struct rzn1_pinctrl *ipctl = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(ipctl->clk);
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_pinctrl_match[] = {
+	{ .compatible = "renesas,rzn1-pinctrl", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rzn1_pinctrl_match);
+
+static struct platform_driver rzn1_pinctrl_driver = {
+	.probe	= rzn1_pinctrl_probe,
+	.remove = rzn1_pinctrl_remove,
+	.driver	= {
+		.name		= "rzn1-pinctrl",
+		.owner		= THIS_MODULE,
+		.of_match_table	= rzn1_pinctrl_match,
+	},
+};
+
+static int __init _pinctrl_drv_register(void)
+{
+	return platform_driver_register(&rzn1_pinctrl_driver);
+}
+subsys_initcall(_pinctrl_drv_register);
+
+MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/N1 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 663b8ce5781b..1fdafa48479c 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -1595,6 +1595,50 @@ static const unsigned int i2c7_b_mux[] = {
 	SCL7_B_MARK, SDA7_B_MARK,
 };
 
+/* - INTC-EX ---------------------------------------------------------------- */
+static const unsigned int intc_ex_irq0_pins[] = {
+	/* IRQ0 */
+	RCAR_GP_PIN(1, 0),
+};
+static const unsigned int intc_ex_irq0_mux[] = {
+	IRQ0_MARK,
+};
+static const unsigned int intc_ex_irq1_pins[] = {
+	/* IRQ1 */
+	RCAR_GP_PIN(1, 1),
+};
+static const unsigned int intc_ex_irq1_mux[] = {
+	IRQ1_MARK,
+};
+static const unsigned int intc_ex_irq2_pins[] = {
+	/* IRQ2 */
+	RCAR_GP_PIN(1, 2),
+};
+static const unsigned int intc_ex_irq2_mux[] = {
+	IRQ2_MARK,
+};
+static const unsigned int intc_ex_irq3_pins[] = {
+	/* IRQ3 */
+	RCAR_GP_PIN(1, 9),
+};
+static const unsigned int intc_ex_irq3_mux[] = {
+	IRQ3_MARK,
+};
+static const unsigned int intc_ex_irq4_pins[] = {
+	/* IRQ4 */
+	RCAR_GP_PIN(1, 10),
+};
+static const unsigned int intc_ex_irq4_mux[] = {
+	IRQ4_MARK,
+};
+static const unsigned int intc_ex_irq5_pins[] = {
+	/* IRQ5 */
+	RCAR_GP_PIN(0, 7),
+};
+static const unsigned int intc_ex_irq5_mux[] = {
+	IRQ5_MARK,
+};
+
 /* - MSIOF0 ----------------------------------------------------------------- */
 static const unsigned int msiof0_clk_pins[] = {
 	/* SCK */
@@ -2390,7 +2434,7 @@ static const unsigned int usb30_id_mux[] = {
 };
 
 static const struct {
-	struct sh_pfc_pin_group common[117];
+	struct sh_pfc_pin_group common[123];
 	struct sh_pfc_pin_group automotive[0];
 } pinmux_groups = {
 	.common = {
@@ -2425,6 +2469,12 @@ static const struct {
 		SH_PFC_PIN_GROUP(i2c6_b),
 		SH_PFC_PIN_GROUP(i2c7_a),
 		SH_PFC_PIN_GROUP(i2c7_b),
+		SH_PFC_PIN_GROUP(intc_ex_irq0),
+		SH_PFC_PIN_GROUP(intc_ex_irq1),
+		SH_PFC_PIN_GROUP(intc_ex_irq2),
+		SH_PFC_PIN_GROUP(intc_ex_irq3),
+		SH_PFC_PIN_GROUP(intc_ex_irq4),
+		SH_PFC_PIN_GROUP(intc_ex_irq5),
 		SH_PFC_PIN_GROUP(msiof0_clk),
 		SH_PFC_PIN_GROUP(msiof0_sync),
 		SH_PFC_PIN_GROUP(msiof0_ss1),
@@ -2569,6 +2619,15 @@ static const char * const i2c7_groups[] = {
 	"i2c7_b",
 };
 
+static const char * const intc_ex_groups[] = {
+	"intc_ex_irq0",
+	"intc_ex_irq1",
+	"intc_ex_irq2",
+	"intc_ex_irq3",
+	"intc_ex_irq4",
+	"intc_ex_irq5",
+};
+
 static const char * const msiof0_groups[] = {
 	"msiof0_clk",
 	"msiof0_sync",
@@ -2716,7 +2775,7 @@ static const char * const usb30_groups[] = {
 };
 
 static const struct {
-	struct sh_pfc_function common[28];
+	struct sh_pfc_function common[29];
 	struct sh_pfc_function automotive[0];
 } pinmux_functions = {
 	.common = {
@@ -2728,6 +2787,7 @@ static const struct {
 		SH_PFC_FUNCTION(i2c5),
 		SH_PFC_FUNCTION(i2c6),
 		SH_PFC_FUNCTION(i2c7),
+		SH_PFC_FUNCTION(intc_ex),
 		SH_PFC_FUNCTION(msiof0),
 		SH_PFC_FUNCTION(msiof1),
 		SH_PFC_FUNCTION(msiof2),
diff --git a/include/dt-bindings/pinctrl/rzn1-pinctrl.h b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
new file mode 100644
index 000000000000..21d6cc4d59f5
--- /dev/null
+++ b/include/dt-bindings/pinctrl/rzn1-pinctrl.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Defines macros and constants for Renesas RZ/N1 pin controller pin
+ * muxing functions.
+ */
+#ifndef __DT_BINDINGS_RZN1_PINCTRL_H
+#define __DT_BINDINGS_RZN1_PINCTRL_H
+
+#define RZN1_PINMUX(_gpio, _func) \
+	(((_func) << 8) | (_gpio))
+
+/*
+ * Given the different levels of muxing on the SoC, it was decided to
+ * 'linearize' them into one numerical space. So mux level 1, 2 and the MDIO
+ * muxes are all represented by one single value.
+ *
+ * You can derive the hardware value pretty easily too, as
+ * 0...9   are Level 1
+ * 10...71 are Level 2. The Level 2 mux will be set to this
+ *         value - RZN1_FUNC_L2_OFFSET, and the Level 1 mux will be
+ *         set accordingly.
+ * 72...103 are for the 2 MDIO muxes.
+ */
+#define RZN1_FUNC_HIGHZ				0
+#define RZN1_FUNC_0L				1
+#define RZN1_FUNC_CLK_ETH_MII_RGMII_RMII	2
+#define RZN1_FUNC_CLK_ETH_NAND			3
+#define RZN1_FUNC_QSPI				4
+#define RZN1_FUNC_SDIO				5
+#define RZN1_FUNC_LCD				6
+#define RZN1_FUNC_LCD_E				7
+#define RZN1_FUNC_MSEBIM			8
+#define RZN1_FUNC_MSEBIS			9
+#define RZN1_FUNC_L2_OFFSET			10	/* I'm Special */
+
+#define RZN1_FUNC_HIGHZ1			(RZN1_FUNC_L2_OFFSET + 0)
+#define RZN1_FUNC_ETHERCAT			(RZN1_FUNC_L2_OFFSET + 1)
+#define RZN1_FUNC_SERCOS3			(RZN1_FUNC_L2_OFFSET + 2)
+#define RZN1_FUNC_SDIO_E			(RZN1_FUNC_L2_OFFSET + 3)
+#define RZN1_FUNC_ETH_MDIO			(RZN1_FUNC_L2_OFFSET + 4)
+#define RZN1_FUNC_ETH_MDIO_E1			(RZN1_FUNC_L2_OFFSET + 5)
+#define RZN1_FUNC_USB				(RZN1_FUNC_L2_OFFSET + 6)
+#define RZN1_FUNC_MSEBIM_E			(RZN1_FUNC_L2_OFFSET + 7)
+#define RZN1_FUNC_MSEBIS_E			(RZN1_FUNC_L2_OFFSET + 8)
+#define RZN1_FUNC_RSV				(RZN1_FUNC_L2_OFFSET + 9)
+#define RZN1_FUNC_RSV_E				(RZN1_FUNC_L2_OFFSET + 10)
+#define RZN1_FUNC_RSV_E1			(RZN1_FUNC_L2_OFFSET + 11)
+#define RZN1_FUNC_UART0_I			(RZN1_FUNC_L2_OFFSET + 12)
+#define RZN1_FUNC_UART0_I_E			(RZN1_FUNC_L2_OFFSET + 13)
+#define RZN1_FUNC_UART1_I			(RZN1_FUNC_L2_OFFSET + 14)
+#define RZN1_FUNC_UART1_I_E			(RZN1_FUNC_L2_OFFSET + 15)
+#define RZN1_FUNC_UART2_I			(RZN1_FUNC_L2_OFFSET + 16)
+#define RZN1_FUNC_UART2_I_E			(RZN1_FUNC_L2_OFFSET + 17)
+#define RZN1_FUNC_UART0				(RZN1_FUNC_L2_OFFSET + 18)
+#define RZN1_FUNC_UART0_E			(RZN1_FUNC_L2_OFFSET + 19)
+#define RZN1_FUNC_UART1				(RZN1_FUNC_L2_OFFSET + 20)
+#define RZN1_FUNC_UART1_E			(RZN1_FUNC_L2_OFFSET + 21)
+#define RZN1_FUNC_UART2				(RZN1_FUNC_L2_OFFSET + 22)
+#define RZN1_FUNC_UART2_E			(RZN1_FUNC_L2_OFFSET + 23)
+#define RZN1_FUNC_UART3				(RZN1_FUNC_L2_OFFSET + 24)
+#define RZN1_FUNC_UART3_E			(RZN1_FUNC_L2_OFFSET + 25)
+#define RZN1_FUNC_UART4				(RZN1_FUNC_L2_OFFSET + 26)
+#define RZN1_FUNC_UART4_E			(RZN1_FUNC_L2_OFFSET + 27)
+#define RZN1_FUNC_UART5				(RZN1_FUNC_L2_OFFSET + 28)
+#define RZN1_FUNC_UART5_E			(RZN1_FUNC_L2_OFFSET + 29)
+#define RZN1_FUNC_UART6				(RZN1_FUNC_L2_OFFSET + 30)
+#define RZN1_FUNC_UART6_E			(RZN1_FUNC_L2_OFFSET + 31)
+#define RZN1_FUNC_UART7				(RZN1_FUNC_L2_OFFSET + 32)
+#define RZN1_FUNC_UART7_E			(RZN1_FUNC_L2_OFFSET + 33)
+#define RZN1_FUNC_SPI0_M			(RZN1_FUNC_L2_OFFSET + 34)
+#define RZN1_FUNC_SPI0_M_E			(RZN1_FUNC_L2_OFFSET + 35)
+#define RZN1_FUNC_SPI1_M			(RZN1_FUNC_L2_OFFSET + 36)
+#define RZN1_FUNC_SPI1_M_E			(RZN1_FUNC_L2_OFFSET + 37)
+#define RZN1_FUNC_SPI2_M			(RZN1_FUNC_L2_OFFSET + 38)
+#define RZN1_FUNC_SPI2_M_E			(RZN1_FUNC_L2_OFFSET + 39)
+#define RZN1_FUNC_SPI3_M			(RZN1_FUNC_L2_OFFSET + 40)
+#define RZN1_FUNC_SPI3_M_E			(RZN1_FUNC_L2_OFFSET + 41)
+#define RZN1_FUNC_SPI4_S			(RZN1_FUNC_L2_OFFSET + 42)
+#define RZN1_FUNC_SPI4_S_E			(RZN1_FUNC_L2_OFFSET + 43)
+#define RZN1_FUNC_SPI5_S			(RZN1_FUNC_L2_OFFSET + 44)
+#define RZN1_FUNC_SPI5_S_E			(RZN1_FUNC_L2_OFFSET + 45)
+#define RZN1_FUNC_SGPIO0_M			(RZN1_FUNC_L2_OFFSET + 46)
+#define RZN1_FUNC_SGPIO1_M			(RZN1_FUNC_L2_OFFSET + 47)
+#define RZN1_FUNC_GPIO				(RZN1_FUNC_L2_OFFSET + 48)
+#define RZN1_FUNC_CAN				(RZN1_FUNC_L2_OFFSET + 49)
+#define RZN1_FUNC_I2C				(RZN1_FUNC_L2_OFFSET + 50)
+#define RZN1_FUNC_SAFE				(RZN1_FUNC_L2_OFFSET + 51)
+#define RZN1_FUNC_PTO_PWM			(RZN1_FUNC_L2_OFFSET + 52)
+#define RZN1_FUNC_PTO_PWM1			(RZN1_FUNC_L2_OFFSET + 53)
+#define RZN1_FUNC_PTO_PWM2			(RZN1_FUNC_L2_OFFSET + 54)
+#define RZN1_FUNC_PTO_PWM3			(RZN1_FUNC_L2_OFFSET + 55)
+#define RZN1_FUNC_PTO_PWM4			(RZN1_FUNC_L2_OFFSET + 56)
+#define RZN1_FUNC_DELTA_SIGMA			(RZN1_FUNC_L2_OFFSET + 57)
+#define RZN1_FUNC_SGPIO2_M			(RZN1_FUNC_L2_OFFSET + 58)
+#define RZN1_FUNC_SGPIO3_M			(RZN1_FUNC_L2_OFFSET + 59)
+#define RZN1_FUNC_SGPIO4_S			(RZN1_FUNC_L2_OFFSET + 60)
+#define RZN1_FUNC_MAC_MTIP_SWITCH		(RZN1_FUNC_L2_OFFSET + 61)
+
+#define RZN1_FUNC_MDIO_OFFSET			(RZN1_FUNC_L2_OFFSET + 62)
+
+/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO function */
+#define RZN1_FUNC_MDIO0_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 0)
+#define RZN1_FUNC_MDIO0_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 1)
+#define RZN1_FUNC_MDIO0_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 2)
+#define RZN1_FUNC_MDIO0_ECAT			(RZN1_FUNC_MDIO_OFFSET + 3)
+#define RZN1_FUNC_MDIO0_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 4)
+#define RZN1_FUNC_MDIO0_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 5)
+#define RZN1_FUNC_MDIO0_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 6)
+#define RZN1_FUNC_MDIO0_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 7)
+/* These are MDIO0 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
+#define RZN1_FUNC_MDIO0_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 8)
+#define RZN1_FUNC_MDIO0_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 9)
+#define RZN1_FUNC_MDIO0_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 10)
+#define RZN1_FUNC_MDIO0_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 11)
+#define RZN1_FUNC_MDIO0_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 12)
+#define RZN1_FUNC_MDIO0_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 13)
+#define RZN1_FUNC_MDIO0_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 14)
+#define RZN1_FUNC_MDIO0_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 15)
+
+/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO function */
+#define RZN1_FUNC_MDIO1_HIGHZ			(RZN1_FUNC_MDIO_OFFSET + 16)
+#define RZN1_FUNC_MDIO1_GMAC0			(RZN1_FUNC_MDIO_OFFSET + 17)
+#define RZN1_FUNC_MDIO1_GMAC1			(RZN1_FUNC_MDIO_OFFSET + 18)
+#define RZN1_FUNC_MDIO1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 19)
+#define RZN1_FUNC_MDIO1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 20)
+#define RZN1_FUNC_MDIO1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 21)
+#define RZN1_FUNC_MDIO1_HWRTOS			(RZN1_FUNC_MDIO_OFFSET + 22)
+#define RZN1_FUNC_MDIO1_SWITCH			(RZN1_FUNC_MDIO_OFFSET + 23)
+/* These are MDIO1 peripherals for the RZN1_FUNC_ETH_MDIO_E1 function */
+#define RZN1_FUNC_MDIO1_E1_HIGHZ		(RZN1_FUNC_MDIO_OFFSET + 24)
+#define RZN1_FUNC_MDIO1_E1_GMAC0		(RZN1_FUNC_MDIO_OFFSET + 25)
+#define RZN1_FUNC_MDIO1_E1_GMAC1		(RZN1_FUNC_MDIO_OFFSET + 26)
+#define RZN1_FUNC_MDIO1_E1_ECAT			(RZN1_FUNC_MDIO_OFFSET + 27)
+#define RZN1_FUNC_MDIO1_E1_S3_MDIO0		(RZN1_FUNC_MDIO_OFFSET + 28)
+#define RZN1_FUNC_MDIO1_E1_S3_MDIO1		(RZN1_FUNC_MDIO_OFFSET + 29)
+#define RZN1_FUNC_MDIO1_E1_HWRTOS		(RZN1_FUNC_MDIO_OFFSET + 30)
+#define RZN1_FUNC_MDIO1_E1_SWITCH		(RZN1_FUNC_MDIO_OFFSET + 31)
+
+#define RZN1_FUNC_MAX				(RZN1_FUNC_MDIO_OFFSET + 32)
+
+#endif /* __DT_BINDINGS_RZN1_PINCTRL_H */