Merge branch 'ieee802154-for-davem-2018-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next

Stefan Schmidt says:

====================
pull-request: ieee802154-next 2018-02-26

An update from ieee802154 for *net-next*

Alexander corrected a setting which got lost during some 6lowpan rework
a while back and Xue Liu provided us with a new driver for the MCR20A
transceiver.

If there are any issues let me know. If not, please pull.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 1956 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt b/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
new file mode 100644
index 000000000000..2aaef567c5be
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
@@ -0,0 +1,23 @@
+* MCR20A IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "nxp,mcr20a"
+  - spi-max-frequency:	maximal bus speed, should be set to a frequency
+			lower than 9000000 depends sync or async operation mode
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device. Non high-level
+			can occur deadlocks while handling isr.
+
+Optional properties:
+  - rst_b-gpio:		GPIO spec for the RST_B pin
+
+Example:
+
+	mcr20a@0 {
+		compatible = "nxp,mcr20a";
+		spi-max-frequency = <9000000>;
+		reg = <0>;
+		interrupts = <17 2>;
+		interrupt-parent = <&gpio>;
+		rst_b-gpio = <&gpio 27 1>
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 93a12af4f180..e0b39004edc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8592,6 +8592,15 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
 F:	drivers/iio/potentiometer/mcp4531.c
 
+MCR20A IEEE-802.15.4 RADIO DRIVER
+M:	Xue Liu <liuxuenetmail@gmail.com>
+L:	linux-wpan@vger.kernel.org
+W:	https://github.com/xueliu/mcr20a-linux
+S:	Maintained
+F:	drivers/net/ieee802154/mcr20a.c
+F:	drivers/net/ieee802154/mcr20a.h
+F:	Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
+
 MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
 M:	William Breathitt Gray <vilhelm.gray@gmail.com>
 L:	linux-iio@vger.kernel.org
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 303ba4133920..8782f5655e3f 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -104,3 +104,14 @@ config IEEE802154_CA8210_DEBUGFS
 	  exposes a debugfs node for each CA8210 instance which allows
 	  direct use of the Cascoda API, exposing the 802.15.4 MAC
 	  management entities.
+
+config IEEE802154_MCR20A
+       tristate "MCR20A transceiver driver"
+       depends on IEEE802154_DRIVERS && MAC802154
+       depends on SPI
+	---help---
+	  Say Y here to enable the MCR20A SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'mcr20a'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index bea1de5e726c..104744d5a668 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
 obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
 obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
 obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o
+obj-$(CONFIG_IEEE802154_MCR20A) += mcr20a.o
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
new file mode 100644
index 000000000000..d9eb22a52551
--- /dev/null
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -0,0 +1,1413 @@
+/*
+ * Driver for NXP MCR20A 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2018 Xue Liu <liuxuenetmail@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/skbuff.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/ieee802154.h>
+#include <linux/debugfs.h>
+
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#include <linux/device.h>
+
+#include "mcr20a.h"
+
+#define	SPI_COMMAND_BUFFER		3
+
+#define REGISTER_READ			BIT(7)
+#define REGISTER_WRITE			(0 << 7)
+#define REGISTER_ACCESS			(0 << 6)
+#define PACKET_BUFF_BURST_ACCESS	BIT(6)
+#define PACKET_BUFF_BYTE_ACCESS		BIT(5)
+
+#define MCR20A_WRITE_REG(x)		(x)
+#define MCR20A_READ_REG(x)		(REGISTER_READ | (x))
+#define MCR20A_BURST_READ_PACKET_BUF	(0xC0)
+#define MCR20A_BURST_WRITE_PACKET_BUF	(0x40)
+
+#define MCR20A_CMD_REG		0x80
+#define MCR20A_CMD_REG_MASK	0x3f
+#define MCR20A_CMD_WRITE	0x40
+#define MCR20A_CMD_FB		0x20
+
+/* Number of Interrupt Request Status Register */
+#define MCR20A_IRQSTS_NUM 2 /* only IRQ_STS1 and IRQ_STS2 */
+
+/* MCR20A CCA Type */
+enum {
+	MCR20A_CCA_ED,	  // energy detect - CCA bit not active,
+			  // not to be used for T and CCCA sequences
+	MCR20A_CCA_MODE1, // energy detect - CCA bit ACTIVE
+	MCR20A_CCA_MODE2, // 802.15.4 compliant signal detect - CCA bit ACTIVE
+	MCR20A_CCA_MODE3
+};
+
+enum {
+	MCR20A_XCVSEQ_IDLE	= 0x00,
+	MCR20A_XCVSEQ_RX	= 0x01,
+	MCR20A_XCVSEQ_TX	= 0x02,
+	MCR20A_XCVSEQ_CCA	= 0x03,
+	MCR20A_XCVSEQ_TR	= 0x04,
+	MCR20A_XCVSEQ_CCCA	= 0x05,
+};
+
+/* IEEE-802.15.4 defined constants (2.4 GHz logical channels) */
+#define	MCR20A_MIN_CHANNEL	(11)
+#define	MCR20A_MAX_CHANNEL	(26)
+#define	MCR20A_CHANNEL_SPACING	(5)
+
+/* MCR20A CCA Threshold constans */
+#define MCR20A_MIN_CCA_THRESHOLD (0x6EU)
+#define MCR20A_MAX_CCA_THRESHOLD (0x00U)
+
+/* version 0C */
+#define MCR20A_OVERWRITE_VERSION (0x0C)
+
+/* MCR20A PLL configurations */
+static const u8  PLL_INT[16] = {
+	/* 2405 */ 0x0B,	/* 2410 */ 0x0B,	/* 2415 */ 0x0B,
+	/* 2420 */ 0x0B,	/* 2425 */ 0x0B,	/* 2430 */ 0x0B,
+	/* 2435 */ 0x0C,	/* 2440 */ 0x0C,	/* 2445 */ 0x0C,
+	/* 2450 */ 0x0C,	/* 2455 */ 0x0C,	/* 2460 */ 0x0C,
+	/* 2465 */ 0x0D,	/* 2470 */ 0x0D,	/* 2475 */ 0x0D,
+	/* 2480 */ 0x0D
+};
+
+static const u8 PLL_FRAC[16] = {
+	/* 2405 */ 0x28,	/* 2410 */ 0x50,	/* 2415 */ 0x78,
+	/* 2420 */ 0xA0,	/* 2425 */ 0xC8,	/* 2430 */ 0xF0,
+	/* 2435 */ 0x18,	/* 2440 */ 0x40,	/* 2445 */ 0x68,
+	/* 2450 */ 0x90,	/* 2455 */ 0xB8,	/* 2460 */ 0xE0,
+	/* 2465 */ 0x08,	/* 2470 */ 0x30,	/* 2475 */ 0x58,
+	/* 2480 */ 0x80
+};
+
+static const struct reg_sequence mar20a_iar_overwrites[] = {
+	{ IAR_MISC_PAD_CTRL,	0x02 },
+	{ IAR_VCO_CTRL1,	0xB3 },
+	{ IAR_VCO_CTRL2,	0x07 },
+	{ IAR_PA_TUNING,	0x71 },
+	{ IAR_CHF_IBUF,		0x2F },
+	{ IAR_CHF_QBUF,		0x2F },
+	{ IAR_CHF_IRIN,		0x24 },
+	{ IAR_CHF_QRIN,		0x24 },
+	{ IAR_CHF_IL,		0x24 },
+	{ IAR_CHF_QL,		0x24 },
+	{ IAR_CHF_CC1,		0x32 },
+	{ IAR_CHF_CCL,		0x1D },
+	{ IAR_CHF_CC2,		0x2D },
+	{ IAR_CHF_IROUT,	0x24 },
+	{ IAR_CHF_QROUT,	0x24 },
+	{ IAR_PA_CAL,		0x28 },
+	{ IAR_AGC_THR1,		0x55 },
+	{ IAR_AGC_THR2,		0x2D },
+	{ IAR_ATT_RSSI1,	0x5F },
+	{ IAR_ATT_RSSI2,	0x8F },
+	{ IAR_RSSI_OFFSET,	0x61 },
+	{ IAR_CHF_PMA_GAIN,	0x03 },
+	{ IAR_CCA1_THRESH,	0x50 },
+	{ IAR_CORR_NVAL,	0x13 },
+	{ IAR_ACKDELAY,		0x3D },
+};
+
+#define MCR20A_VALID_CHANNELS (0x07FFF800)
+
+struct mcr20a_platform_data {
+	int rst_gpio;
+};
+
+#define MCR20A_MAX_BUF		(127)
+
+#define printdev(X) (&X->spi->dev)
+
+/* regmap information for Direct Access Register (DAR) access */
+#define MCR20A_DAR_WRITE	0x01
+#define MCR20A_DAR_READ		0x00
+#define MCR20A_DAR_NUMREGS	0x3F
+
+/* regmap information for Indirect Access Register (IAR) access */
+#define MCR20A_IAR_ACCESS	0x80
+#define MCR20A_IAR_NUMREGS	0xBEFF
+
+/* Read/Write SPI Commands for DAR and IAR registers. */
+#define MCR20A_READSHORT(reg)	((reg) << 1)
+#define MCR20A_WRITESHORT(reg)	((reg) << 1 | 1)
+#define MCR20A_READLONG(reg)	(1 << 15 | (reg) << 5)
+#define MCR20A_WRITELONG(reg)	(1 << 15 | (reg) << 5 | 1 << 4)
+
+/* Type definitions for link configuration of instantiable layers  */
+#define MCR20A_PHY_INDIRECT_QUEUE_SIZE (12)
+
+static bool
+mcr20a_dar_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+	case DAR_PHY_CTRL1:
+	case DAR_PHY_CTRL2:
+	case DAR_PHY_CTRL3:
+	case DAR_PHY_CTRL4:
+	case DAR_SRC_CTRL:
+	case DAR_SRC_ADDRS_SUM_LSB:
+	case DAR_SRC_ADDRS_SUM_MSB:
+	case DAR_T3CMP_LSB:
+	case DAR_T3CMP_MSB:
+	case DAR_T3CMP_USB:
+	case DAR_T2PRIMECMP_LSB:
+	case DAR_T2PRIMECMP_MSB:
+	case DAR_T1CMP_LSB:
+	case DAR_T1CMP_MSB:
+	case DAR_T1CMP_USB:
+	case DAR_T2CMP_LSB:
+	case DAR_T2CMP_MSB:
+	case DAR_T2CMP_USB:
+	case DAR_T4CMP_LSB:
+	case DAR_T4CMP_MSB:
+	case DAR_T4CMP_USB:
+	case DAR_PLL_INT0:
+	case DAR_PLL_FRAC0_LSB:
+	case DAR_PLL_FRAC0_MSB:
+	case DAR_PA_PWR:
+	/* no DAR_ACM */
+	case DAR_OVERWRITE_VER:
+	case DAR_CLK_OUT_CTRL:
+	case DAR_PWR_MODES:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mcr20a_dar_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case DAR_RX_FRM_LEN:
+	case DAR_CCA1_ED_FNL:
+	case DAR_EVENT_TMR_LSB:
+	case DAR_EVENT_TMR_MSB:
+	case DAR_EVENT_TMR_USB:
+	case DAR_TIMESTAMP_LSB:
+	case DAR_TIMESTAMP_MSB:
+	case DAR_TIMESTAMP_USB:
+	case DAR_SEQ_STATE:
+	case DAR_LQI_VALUE:
+	case DAR_RSSI_CCA_CONT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+	/* use them in spi_async and regmap so it's volatile */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mcr20a_dar_regmap = {
+	.name			= "mcr20a_dar",
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.write_flag_mask	= REGISTER_ACCESS | REGISTER_WRITE,
+	.read_flag_mask		= REGISTER_ACCESS | REGISTER_READ,
+	.cache_type		= REGCACHE_RBTREE,
+	.writeable_reg		= mcr20a_dar_writeable,
+	.readable_reg		= mcr20a_dar_readable,
+	.volatile_reg		= mcr20a_dar_volatile,
+	.precious_reg		= mcr20a_dar_precious,
+	.fast_io		= true,
+	.can_multi_write	= true,
+};
+
+static bool
+mcr20a_iar_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case IAR_XTAL_TRIM:
+	case IAR_PMC_LP_TRIM:
+	case IAR_MACPANID0_LSB:
+	case IAR_MACPANID0_MSB:
+	case IAR_MACSHORTADDRS0_LSB:
+	case IAR_MACSHORTADDRS0_MSB:
+	case IAR_MACLONGADDRS0_0:
+	case IAR_MACLONGADDRS0_8:
+	case IAR_MACLONGADDRS0_16:
+	case IAR_MACLONGADDRS0_24:
+	case IAR_MACLONGADDRS0_32:
+	case IAR_MACLONGADDRS0_40:
+	case IAR_MACLONGADDRS0_48:
+	case IAR_MACLONGADDRS0_56:
+	case IAR_RX_FRAME_FILTER:
+	case IAR_PLL_INT1:
+	case IAR_PLL_FRAC1_LSB:
+	case IAR_PLL_FRAC1_MSB:
+	case IAR_MACPANID1_LSB:
+	case IAR_MACPANID1_MSB:
+	case IAR_MACSHORTADDRS1_LSB:
+	case IAR_MACSHORTADDRS1_MSB:
+	case IAR_MACLONGADDRS1_0:
+	case IAR_MACLONGADDRS1_8:
+	case IAR_MACLONGADDRS1_16:
+	case IAR_MACLONGADDRS1_24:
+	case IAR_MACLONGADDRS1_32:
+	case IAR_MACLONGADDRS1_40:
+	case IAR_MACLONGADDRS1_48:
+	case IAR_MACLONGADDRS1_56:
+	case IAR_DUAL_PAN_CTRL:
+	case IAR_DUAL_PAN_DWELL:
+	case IAR_CCA1_THRESH:
+	case IAR_CCA1_ED_OFFSET_COMP:
+	case IAR_LQI_OFFSET_COMP:
+	case IAR_CCA_CTRL:
+	case IAR_CCA2_CORR_PEAKS:
+	case IAR_CCA2_CORR_THRESH:
+	case IAR_TMR_PRESCALE:
+	case IAR_ANT_PAD_CTRL:
+	case IAR_MISC_PAD_CTRL:
+	case IAR_BSM_CTRL:
+	case IAR_RNG:
+	case IAR_RX_WTR_MARK:
+	case IAR_SOFT_RESET:
+	case IAR_TXDELAY:
+	case IAR_ACKDELAY:
+	case IAR_CORR_NVAL:
+	case IAR_ANT_AGC_CTRL:
+	case IAR_AGC_THR1:
+	case IAR_AGC_THR2:
+	case IAR_PA_CAL:
+	case IAR_ATT_RSSI1:
+	case IAR_ATT_RSSI2:
+	case IAR_RSSI_OFFSET:
+	case IAR_XTAL_CTRL:
+	case IAR_CHF_PMA_GAIN:
+	case IAR_CHF_IBUF:
+	case IAR_CHF_QBUF:
+	case IAR_CHF_IRIN:
+	case IAR_CHF_QRIN:
+	case IAR_CHF_IL:
+	case IAR_CHF_QL:
+	case IAR_CHF_CC1:
+	case IAR_CHF_CCL:
+	case IAR_CHF_CC2:
+	case IAR_CHF_IROUT:
+	case IAR_CHF_QROUT:
+	case IAR_PA_TUNING:
+	case IAR_VCO_CTRL1:
+	case IAR_VCO_CTRL2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_iar_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mcr20a_iar_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case IAR_PART_ID:
+	case IAR_DUAL_PAN_STS:
+	case IAR_RX_BYTE_COUNT:
+	case IAR_FILTERFAIL_CODE1:
+	case IAR_FILTERFAIL_CODE2:
+	case IAR_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_iar_volatile(struct device *dev, unsigned int reg)
+{
+/* can be changed during runtime */
+	switch (reg) {
+	case IAR_DUAL_PAN_STS:
+	case IAR_RX_BYTE_COUNT:
+	case IAR_FILTERFAIL_CODE1:
+	case IAR_FILTERFAIL_CODE2:
+	case IAR_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mcr20a_iar_regmap = {
+	.name			= "mcr20a_iar",
+	.reg_bits		= 16,
+	.val_bits		= 8,
+	.write_flag_mask	= REGISTER_ACCESS | REGISTER_WRITE | IAR_INDEX,
+	.read_flag_mask		= REGISTER_ACCESS | REGISTER_READ  | IAR_INDEX,
+	.cache_type		= REGCACHE_RBTREE,
+	.writeable_reg		= mcr20a_iar_writeable,
+	.readable_reg		= mcr20a_iar_readable,
+	.volatile_reg		= mcr20a_iar_volatile,
+	.fast_io		= true,
+};
+
+struct mcr20a_local {
+	struct spi_device *spi;
+
+	struct ieee802154_hw *hw;
+	struct mcr20a_platform_data *pdata;
+	struct regmap *regmap_dar;
+	struct regmap *regmap_iar;
+
+	u8 *buf;
+
+	bool is_tx;
+
+	/* for writing tx buffer */
+	struct spi_message tx_buf_msg;
+	u8 tx_header[1];
+	/* burst buffer write command */
+	struct spi_transfer tx_xfer_header;
+	u8 tx_len[1];
+	/* len of tx packet */
+	struct spi_transfer tx_xfer_len;
+	/* data of tx packet */
+	struct spi_transfer tx_xfer_buf;
+	struct sk_buff *tx_skb;
+
+	/* for read length rxfifo */
+	struct spi_message reg_msg;
+	u8 reg_cmd[1];
+	u8 reg_data[MCR20A_IRQSTS_NUM];
+	struct spi_transfer reg_xfer_cmd;
+	struct spi_transfer reg_xfer_data;
+
+	/* receive handling */
+	struct spi_message rx_buf_msg;
+	u8 rx_header[1];
+	struct spi_transfer rx_xfer_header;
+	u8 rx_lqi[1];
+	struct spi_transfer rx_xfer_lqi;
+	u8 rx_buf[MCR20A_MAX_BUF];
+	struct spi_transfer rx_xfer_buf;
+
+	/* isr handling for reading intstat */
+	struct spi_message irq_msg;
+	u8 irq_header[1];
+	u8 irq_data[MCR20A_IRQSTS_NUM];
+	struct spi_transfer irq_xfer_data;
+	struct spi_transfer irq_xfer_header;
+};
+
+static void
+mcr20a_write_tx_buf_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	lp->reg_msg.complete = NULL;
+	lp->reg_cmd[0]	= MCR20A_WRITE_REG(DAR_PHY_CTRL1);
+	lp->reg_data[0] = MCR20A_XCVSEQ_TX;
+	lp->reg_xfer_data.len = 1;
+
+	ret = spi_async(lp->spi, &lp->reg_msg);
+	if (ret)
+		dev_err(printdev(lp), "failed to set SEQ TX\n");
+}
+
+static int
+mcr20a_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	lp->tx_skb = skb;
+
+	print_hex_dump_debug("mcr20a tx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			     skb->data, skb->len, 0);
+
+	lp->is_tx = 1;
+
+	lp->reg_msg.complete	= NULL;
+	lp->reg_cmd[0]		= MCR20A_WRITE_REG(DAR_PHY_CTRL1);
+	lp->reg_data[0]		= MCR20A_XCVSEQ_IDLE;
+	lp->reg_xfer_data.len	= 1;
+
+	return spi_async(lp->spi, &lp->reg_msg);
+}
+
+static int
+mcr20a_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int
+mcr20a_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* freqency = ((PLL_INT+64) + (PLL_FRAC/65536)) * 32 MHz */
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_INT0, PLL_INT[channel - 11]);
+	if (ret)
+		return ret;
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_FRAC0_LSB, 0x00);
+	if (ret)
+		return ret;
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_FRAC0_MSB,
+			   PLL_FRAC[channel - 11]);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+mcr20a_start(struct ieee802154_hw *hw)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* No slotted operation */
+	dev_dbg(printdev(lp), "no slotted operation\n");
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_SLOTTED, 0x0);
+
+	/* enable irq */
+	enable_irq(lp->spi->irq);
+
+	/* Unmask SEQ interrupt */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL2,
+				 DAR_PHY_CTRL2_SEQMSK, 0x0);
+
+	/* Start the RX sequence */
+	dev_dbg(printdev(lp), "start the RX sequence\n");
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+
+	return 0;
+}
+
+static void
+mcr20a_stop(struct ieee802154_hw *hw)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* stop all running sequence */
+	regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+			   DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_IDLE);
+
+	/* disable irq */
+	disable_irq(lp->spi->irq);
+}
+
+static int
+mcr20a_set_hw_addr_filt(struct ieee802154_hw *hw,
+			struct ieee802154_hw_addr_filt *filt,
+			unsigned long changed)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		regmap_write(lp->regmap_iar, IAR_MACSHORTADDRS0_LSB, addr);
+		regmap_write(lp->regmap_iar, IAR_MACSHORTADDRS0_MSB, addr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		regmap_write(lp->regmap_iar, IAR_MACPANID0_LSB, pan);
+		regmap_write(lp->regmap_iar, IAR_MACPANID0_MSB, pan >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 addr[8], i;
+
+		memcpy(addr, &filt->ieee_addr, 8);
+		for (i = 0; i < 8; i++)
+			regmap_write(lp->regmap_iar,
+				     IAR_MACLONGADDRS0_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		if (filt->pan_coord) {
+			regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					   DAR_PHY_CTRL4_PANCORDNTR0, 0x10);
+		} else {
+			regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					   DAR_PHY_CTRL4_PANCORDNTR0, 0x00);
+		}
+	}
+
+	return 0;
+}
+
+/* -30 dBm to 10 dBm */
+#define MCR20A_MAX_TX_POWERS 0x14
+static const s32 mcr20a_powers[MCR20A_MAX_TX_POWERS + 1] = {
+	-3000, -2800, -2600, -2400, -2200, -2000, -1800, -1600, -1400,
+	-1200, -1000, -800, -600, -400, -200, 0, 200, 400, 600, 800, 1000
+};
+
+static int
+mcr20a_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mcr20a_local *lp = hw->priv;
+	u32 i;
+
+	dev_dbg(printdev(lp), "%s(%d)\n", __func__, mbm);
+
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return regmap_write(lp->regmap_dar, DAR_PA_PWR,
+					    ((i + 8) & 0x1F));
+	}
+
+	return -EINVAL;
+}
+
+#define MCR20A_MAX_ED_LEVELS MCR20A_MIN_CCA_THRESHOLD
+static s32 mcr20a_ed_levels[MCR20A_MAX_ED_LEVELS + 1];
+
+static int
+mcr20a_set_cca_mode(struct ieee802154_hw *hw,
+		    const struct wpan_phy_cca *cca)
+{
+	struct mcr20a_local *lp = hw->priv;
+	unsigned int cca_mode = 0xff;
+	bool cca_mode_and = false;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		cca_mode = MCR20A_CCA_MODE1;
+		break;
+	case NL802154_CCA_CARRIER:
+		cca_mode = MCR20A_CCA_MODE2;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			cca_mode = MCR20A_CCA_MODE3;
+			cca_mode_and = true;
+			break;
+		case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+			cca_mode = MCR20A_CCA_MODE3;
+			cca_mode_and = false;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+				 DAR_PHY_CTRL4_CCATYPE_MASK,
+				 cca_mode << DAR_PHY_CTRL4_CCATYPE_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	if (cca_mode == MCR20A_CCA_MODE3) {
+		if (cca_mode_and) {
+			ret = regmap_update_bits(lp->regmap_iar, IAR_CCA_CTRL,
+						 IAR_CCA_CTRL_CCA3_AND_NOT_OR,
+						 0x08);
+		} else {
+			ret = regmap_update_bits(lp->regmap_iar,
+						 IAR_CCA_CTRL,
+						 IAR_CCA_CTRL_CCA3_AND_NOT_OR,
+						 0x00);
+		}
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int
+mcr20a_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mcr20a_local *lp = hw->priv;
+	u32 i;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return regmap_write(lp->regmap_iar, IAR_CCA1_THRESH, i);
+	}
+
+	return 0;
+}
+
+static int
+mcr20a_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+	u8 rx_frame_filter_reg = 0x0;
+	u8 val;
+
+	dev_dbg(printdev(lp), "%s(%d)\n", __func__, on);
+
+	if (on) {
+		/* All frame types accepted*/
+		val |= DAR_PHY_CTRL4_PROMISCUOUS;
+		rx_frame_filter_reg &= ~(IAR_RX_FRAME_FLT_FRM_VER);
+		rx_frame_filter_reg |= (IAR_RX_FRAME_FLT_ACK_FT |
+				  IAR_RX_FRAME_FLT_NS_FT);
+
+		ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					 DAR_PHY_CTRL4_PROMISCUOUS,
+					 DAR_PHY_CTRL4_PROMISCUOUS);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+				   rx_frame_filter_reg);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					 DAR_PHY_CTRL4_PROMISCUOUS, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+				   IAR_RX_FRAME_FLT_FRM_VER |
+				   IAR_RX_FRAME_FLT_BEACON_FT |
+				   IAR_RX_FRAME_FLT_DATA_FT |
+				   IAR_RX_FRAME_FLT_CMD_FT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct ieee802154_ops mcr20a_hw_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= mcr20a_xmit,
+	.ed			= mcr20a_ed,
+	.set_channel		= mcr20a_set_channel,
+	.start			= mcr20a_start,
+	.stop			= mcr20a_stop,
+	.set_hw_addr_filt	= mcr20a_set_hw_addr_filt,
+	.set_txpower		= mcr20a_set_txpower,
+	.set_cca_mode		= mcr20a_set_cca_mode,
+	.set_cca_ed_level	= mcr20a_set_cca_ed_level,
+	.set_promiscuous_mode	= mcr20a_set_promiscuous_mode,
+};
+
+static int
+mcr20a_request_rx(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* Start the RX sequence */
+	regmap_update_bits_async(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+
+	return 0;
+}
+
+static void
+mcr20a_handle_rx_read_buf_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 len = lp->reg_data[0] & DAR_RX_FRAME_LENGTH_MASK;
+	struct sk_buff *skb;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	dev_dbg(printdev(lp), "RX is done\n");
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_vdbg(&lp->spi->dev, "corrupted frame received\n");
+		len = IEEE802154_MTU;
+	}
+
+	len = len - 2;  /* get rid of frame check field */
+
+	skb = dev_alloc_skb(len);
+	if (!skb)
+		return;
+
+	memcpy(skb_put(skb, len), lp->rx_buf, len);
+	ieee802154_rx_irqsafe(lp->hw, skb, lp->rx_lqi[0]);
+
+	print_hex_dump_debug("mcr20a rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			     lp->rx_buf, len, 0);
+	pr_debug("mcr20a rx: lqi: %02hhx\n", lp->rx_lqi[0]);
+
+	/* start RX sequence */
+	mcr20a_request_rx(lp);
+}
+
+static void
+mcr20a_handle_rx_read_len_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 len;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* get the length of received frame */
+	len = lp->reg_data[0] & DAR_RX_FRAME_LENGTH_MASK;
+	dev_dbg(printdev(lp), "frame len : %d\n", len);
+
+	/* prepare to read the rx buf */
+	lp->rx_buf_msg.complete = mcr20a_handle_rx_read_buf_complete;
+	lp->rx_header[0] = MCR20A_BURST_READ_PACKET_BUF;
+	lp->rx_xfer_buf.len = len;
+
+	ret = spi_async(lp->spi, &lp->rx_buf_msg);
+	if (ret)
+		dev_err(printdev(lp), "failed to read rx buffer length\n");
+}
+
+static int
+mcr20a_handle_rx(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+	lp->reg_msg.complete = mcr20a_handle_rx_read_len_complete;
+	lp->reg_cmd[0] = MCR20A_READ_REG(DAR_RX_FRM_LEN);
+	lp->reg_xfer_data.len	= 1;
+
+	return spi_async(lp->spi, &lp->reg_msg);
+}
+
+static int
+mcr20a_handle_tx_complete(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
+
+	return mcr20a_request_rx(lp);
+}
+
+static int
+mcr20a_handle_tx(struct mcr20a_local *lp)
+{
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* write tx buffer */
+	lp->tx_header[0]	= MCR20A_BURST_WRITE_PACKET_BUF;
+	/* add 2 bytes of FCS */
+	lp->tx_len[0]		= lp->tx_skb->len + 2;
+	lp->tx_xfer_buf.tx_buf	= lp->tx_skb->data;
+	/* add 1 byte psduLength */
+	lp->tx_xfer_buf.len	= lp->tx_skb->len + 1;
+
+	ret = spi_async(lp->spi, &lp->tx_buf_msg);
+	if (ret) {
+		dev_err(printdev(lp), "SPI write Failed for TX buf\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void
+mcr20a_irq_clean_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 seq_state = lp->irq_data[DAR_IRQ_STS1] & DAR_PHY_CTRL1_XCVSEQ_MASK;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	enable_irq(lp->spi->irq);
+
+	dev_dbg(printdev(lp), "IRQ STA1 (%02x) STA2 (%02x)\n",
+		lp->irq_data[DAR_IRQ_STS1], lp->irq_data[DAR_IRQ_STS2]);
+
+	switch (seq_state) {
+	/* TX IRQ, RX IRQ and SEQ IRQ */
+	case (0x03):
+		if (lp->is_tx) {
+			lp->is_tx = 0;
+			dev_dbg(printdev(lp), "TX is done. No ACK\n");
+			mcr20a_handle_tx_complete(lp);
+		}
+		break;
+	case (0x05):
+			/* rx is starting */
+			dev_dbg(printdev(lp), "RX is starting\n");
+			mcr20a_handle_rx(lp);
+		break;
+	case (0x07):
+		if (lp->is_tx) {
+			/* tx is done */
+			lp->is_tx = 0;
+			dev_dbg(printdev(lp), "TX is done. Get ACK\n");
+			mcr20a_handle_tx_complete(lp);
+		} else {
+			/* rx is starting */
+			dev_dbg(printdev(lp), "RX is starting\n");
+			mcr20a_handle_rx(lp);
+		}
+		break;
+	case (0x01):
+		if (lp->is_tx) {
+			dev_dbg(printdev(lp), "TX is starting\n");
+			mcr20a_handle_tx(lp);
+		} else {
+			dev_dbg(printdev(lp), "MCR20A is stop\n");
+		}
+		break;
+	}
+}
+
+static void mcr20a_irq_status_complete(void *context)
+{
+	int ret;
+	struct mcr20a_local *lp = context;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+	regmap_update_bits_async(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_IDLE);
+
+	lp->reg_msg.complete = mcr20a_irq_clean_complete;
+	lp->reg_cmd[0] = MCR20A_WRITE_REG(DAR_IRQ_STS1);
+	memcpy(lp->reg_data, lp->irq_data, MCR20A_IRQSTS_NUM);
+	lp->reg_xfer_data.len = MCR20A_IRQSTS_NUM;
+
+	ret = spi_async(lp->spi, &lp->reg_msg);
+
+	if (ret)
+		dev_err(printdev(lp), "failed to clean irq status\n");
+}
+
+static irqreturn_t mcr20a_irq_isr(int irq, void *data)
+{
+	struct mcr20a_local *lp = data;
+	int ret;
+
+	disable_irq_nosync(irq);
+
+	lp->irq_header[0] = MCR20A_READ_REG(DAR_IRQ_STS1);
+	/* read IRQSTSx */
+	ret = spi_async(lp->spi, &lp->irq_msg);
+	if (ret) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mcr20a_get_platform_data(struct spi_device *spi,
+				    struct mcr20a_platform_data *pdata)
+{
+	int ret = 0;
+
+	if (!spi->dev.of_node)
+		return -EINVAL;
+
+	pdata->rst_gpio = of_get_named_gpio(spi->dev.of_node, "rst_b-gpio", 0);
+	dev_dbg(&spi->dev, "rst_b-gpio: %d\n", pdata->rst_gpio);
+
+	return ret;
+}
+
+static void mcr20a_hw_setup(struct mcr20a_local *lp)
+{
+	u8 i;
+	struct ieee802154_hw *hw = lp->hw;
+	struct wpan_phy *phy = lp->hw->phy;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	phy->symbol_duration = 16;
+	phy->lifs_period = 40;
+	phy->sifs_period = 12;
+
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
+			IEEE802154_HW_AFILT |
+			IEEE802154_HW_PROMISCUOUS;
+
+	phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			WPAN_PHY_FLAG_CCA_MODE;
+
+	phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	/* initiating cca_ed_levels */
+	for (i = MCR20A_MAX_CCA_THRESHOLD; i < MCR20A_MIN_CCA_THRESHOLD + 1;
+	      ++i) {
+		mcr20a_ed_levels[i] =  -i * 100;
+	}
+
+	phy->supported.cca_ed_levels = mcr20a_ed_levels;
+	phy->supported.cca_ed_levels_size = ARRAY_SIZE(mcr20a_ed_levels);
+
+	phy->cca.mode = NL802154_CCA_ENERGY;
+
+	phy->supported.channels[0] = MCR20A_VALID_CHANNELS;
+	phy->current_page = 0;
+	/* MCR20A default reset value */
+	phy->current_channel = 20;
+	phy->symbol_duration = 16;
+	phy->supported.tx_powers = mcr20a_powers;
+	phy->supported.tx_powers_size = ARRAY_SIZE(mcr20a_powers);
+	phy->cca_ed_level = phy->supported.cca_ed_levels[75];
+	phy->transmit_power = phy->supported.tx_powers[0x0F];
+}
+
+static void
+mcr20a_setup_tx_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->tx_buf_msg);
+	lp->tx_buf_msg.context = lp;
+	lp->tx_buf_msg.complete = mcr20a_write_tx_buf_complete;
+
+	lp->tx_xfer_header.len = 1;
+	lp->tx_xfer_header.tx_buf = lp->tx_header;
+
+	lp->tx_xfer_len.len = 1;
+	lp->tx_xfer_len.tx_buf = lp->tx_len;
+
+	spi_message_add_tail(&lp->tx_xfer_header, &lp->tx_buf_msg);
+	spi_message_add_tail(&lp->tx_xfer_len, &lp->tx_buf_msg);
+	spi_message_add_tail(&lp->tx_xfer_buf, &lp->tx_buf_msg);
+}
+
+static void
+mcr20a_setup_rx_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->reg_msg);
+	lp->reg_msg.context = lp;
+
+	lp->reg_xfer_cmd.len = 1;
+	lp->reg_xfer_cmd.tx_buf = lp->reg_cmd;
+	lp->reg_xfer_cmd.rx_buf = lp->reg_cmd;
+
+	lp->reg_xfer_data.rx_buf = lp->reg_data;
+	lp->reg_xfer_data.tx_buf = lp->reg_data;
+
+	spi_message_add_tail(&lp->reg_xfer_cmd, &lp->reg_msg);
+	spi_message_add_tail(&lp->reg_xfer_data, &lp->reg_msg);
+
+	spi_message_init(&lp->rx_buf_msg);
+	lp->rx_buf_msg.context = lp;
+	lp->rx_buf_msg.complete = mcr20a_handle_rx_read_buf_complete;
+	lp->rx_xfer_header.len = 1;
+	lp->rx_xfer_header.tx_buf = lp->rx_header;
+	lp->rx_xfer_header.rx_buf = lp->rx_header;
+
+	lp->rx_xfer_buf.rx_buf = lp->rx_buf;
+
+	lp->rx_xfer_lqi.len = 1;
+	lp->rx_xfer_lqi.rx_buf = lp->rx_lqi;
+
+	spi_message_add_tail(&lp->rx_xfer_header, &lp->rx_buf_msg);
+	spi_message_add_tail(&lp->rx_xfer_buf, &lp->rx_buf_msg);
+	spi_message_add_tail(&lp->rx_xfer_lqi, &lp->rx_buf_msg);
+}
+
+static void
+mcr20a_setup_irq_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->irq_msg);
+	lp->irq_msg.context		= lp;
+	lp->irq_msg.complete	= mcr20a_irq_status_complete;
+	lp->irq_xfer_header.len	= 1;
+	lp->irq_xfer_header.tx_buf = lp->irq_header;
+	lp->irq_xfer_header.rx_buf = lp->irq_header;
+
+	lp->irq_xfer_data.len	= MCR20A_IRQSTS_NUM;
+	lp->irq_xfer_data.rx_buf = lp->irq_data;
+
+	spi_message_add_tail(&lp->irq_xfer_header, &lp->irq_msg);
+	spi_message_add_tail(&lp->irq_xfer_data, &lp->irq_msg);
+}
+
+static int
+mcr20a_phy_init(struct mcr20a_local *lp)
+{
+	u8 index;
+	unsigned int phy_reg = 0;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* Disable Tristate on COCO MISO for SPI reads */
+	ret = regmap_write(lp->regmap_iar, IAR_MISC_PAD_CTRL, 0x02);
+	if (ret)
+		goto err_ret;
+
+	/* Clear all PP IRQ bits in IRQSTS1 to avoid unexpected interrupts
+	 * immediately after init
+	 */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS1, 0xEF);
+	if (ret)
+		goto err_ret;
+
+	/* Clear all PP IRQ bits in IRQSTS2 */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS2,
+			   DAR_IRQSTS2_ASM_IRQ | DAR_IRQSTS2_PB_ERR_IRQ |
+			   DAR_IRQSTS2_WAKE_IRQ);
+	if (ret)
+		goto err_ret;
+
+	/* Disable all timer interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS3, 0xFF);
+	if (ret)
+		goto err_ret;
+
+	/*  PHY_CTRL1 : default HW settings + AUTOACK enabled */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_AUTOACK, DAR_PHY_CTRL1_AUTOACK);
+
+	/*  PHY_CTRL2 : disable all interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_PHY_CTRL2, 0xFF);
+	if (ret)
+		goto err_ret;
+
+	/* PHY_CTRL3 : disable all timers and remaining interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_PHY_CTRL3,
+			   DAR_PHY_CTRL3_ASM_MSK | DAR_PHY_CTRL3_PB_ERR_MSK |
+			   DAR_PHY_CTRL3_WAKE_MSK);
+	if (ret)
+		goto err_ret;
+
+	/* SRC_CTRL : enable Acknowledge Frame Pending and
+	 * Source Address Matching Enable
+	 */
+	ret = regmap_write(lp->regmap_dar, DAR_SRC_CTRL,
+			   DAR_SRC_CTRL_ACK_FRM_PND |
+			   (DAR_SRC_CTRL_INDEX << DAR_SRC_CTRL_INDEX_SHIFT));
+	if (ret)
+		goto err_ret;
+
+	/*  RX_FRAME_FILTER */
+	/*  FRM_VER[1:0] = b11. Accept FrameVersion 0 and 1 packets */
+	ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+			   IAR_RX_FRAME_FLT_FRM_VER |
+			   IAR_RX_FRAME_FLT_BEACON_FT |
+			   IAR_RX_FRAME_FLT_DATA_FT |
+			   IAR_RX_FRAME_FLT_CMD_FT);
+	if (ret)
+		goto err_ret;
+
+	dev_info(printdev(lp), "MCR20A DAR overwrites version: 0x%02x\n",
+		 MCR20A_OVERWRITE_VERSION);
+
+	/* Overwrites direct registers  */
+	ret = regmap_write(lp->regmap_dar, DAR_OVERWRITE_VER,
+			   MCR20A_OVERWRITE_VERSION);
+	if (ret)
+		goto err_ret;
+
+	/* Overwrites indirect registers  */
+	ret = regmap_multi_reg_write(lp->regmap_iar, mar20a_iar_overwrites,
+				     ARRAY_SIZE(mar20a_iar_overwrites));
+	if (ret)
+		goto err_ret;
+
+	/* Clear HW indirect queue */
+	dev_dbg(printdev(lp), "clear HW indirect queue\n");
+	for (index = 0; index < MCR20A_PHY_INDIRECT_QUEUE_SIZE; index++) {
+		phy_reg = (u8)(((index & DAR_SRC_CTRL_INDEX) <<
+			       DAR_SRC_CTRL_INDEX_SHIFT)
+			      | (DAR_SRC_CTRL_SRCADDR_EN)
+			      | (DAR_SRC_CTRL_INDEX_DISABLE));
+		ret = regmap_write(lp->regmap_dar, DAR_SRC_CTRL, phy_reg);
+		if (ret)
+			goto err_ret;
+		phy_reg = 0;
+	}
+
+	/* Assign HW Indirect hash table to PAN0 */
+	ret = regmap_read(lp->regmap_iar, IAR_DUAL_PAN_CTRL, &phy_reg);
+	if (ret)
+		goto err_ret;
+
+	/* Clear current lvl */
+	phy_reg &= ~IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK;
+
+	/* Set new lvl */
+	phy_reg |= MCR20A_PHY_INDIRECT_QUEUE_SIZE <<
+		IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_SHIFT;
+	ret = regmap_write(lp->regmap_iar, IAR_DUAL_PAN_CTRL, phy_reg);
+	if (ret)
+		goto err_ret;
+
+	/* Set CCA threshold to -75 dBm */
+	ret = regmap_write(lp->regmap_iar, IAR_CCA1_THRESH, 0x4B);
+	if (ret)
+		goto err_ret;
+
+	/* Set prescaller to obtain 1 symbol (16us) timebase */
+	ret = regmap_write(lp->regmap_iar, IAR_TMR_PRESCALE, 0x05);
+	if (ret)
+		goto err_ret;
+
+	/* Enable autodoze mode. */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PWR_MODES,
+				 DAR_PWR_MODES_AUTODOZE,
+				 DAR_PWR_MODES_AUTODOZE);
+	if (ret)
+		goto err_ret;
+
+	/* Disable clk_out */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_CLK_OUT_CTRL,
+				 DAR_CLK_OUT_CTRL_EN, 0x0);
+	if (ret)
+		goto err_ret;
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static int
+mcr20a_probe(struct spi_device *spi)
+{
+	struct ieee802154_hw *hw;
+	struct mcr20a_local *lp;
+	struct mcr20a_platform_data *pdata;
+	int irq_type;
+	int ret = -ENOMEM;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	/* set mcr20a platform data */
+	ret = mcr20a_get_platform_data(spi, pdata);
+	if (ret < 0) {
+		dev_crit(&spi->dev, "mcr20a_get_platform_data failed.\n");
+		return ret;
+	}
+
+	/* init reset gpio */
+	if (gpio_is_valid(pdata->rst_gpio)) {
+		ret = devm_gpio_request_one(&spi->dev, pdata->rst_gpio,
+					    GPIOF_OUT_INIT_HIGH, "reset");
+		if (ret)
+			return ret;
+	}
+
+	/* reset mcr20a */
+	if (gpio_is_valid(pdata->rst_gpio)) {
+		usleep_range(10, 20);
+		gpio_set_value_cansleep(pdata->rst_gpio, 0);
+		usleep_range(10, 20);
+		gpio_set_value_cansleep(pdata->rst_gpio, 1);
+		usleep_range(120, 240);
+	}
+
+	/* allocate ieee802154_hw and private data */
+	hw = ieee802154_alloc_hw(sizeof(*lp), &mcr20a_hw_ops);
+	if (!hw) {
+		dev_crit(&spi->dev, "ieee802154_alloc_hw failed\n");
+		return -ENOMEM;
+	}
+
+	/* init mcr20a local data */
+	lp = hw->priv;
+	lp->hw = hw;
+	lp->spi = spi;
+	lp->spi->dev.platform_data = pdata;
+	lp->pdata = pdata;
+
+	/* init ieee802154_hw */
+	hw->parent = &spi->dev;
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	/* init buf */
+	lp->buf = devm_kzalloc(&spi->dev, SPI_COMMAND_BUFFER, GFP_KERNEL);
+
+	if (!lp->buf)
+		return -ENOMEM;
+
+	mcr20a_setup_tx_spi_messages(lp);
+	mcr20a_setup_rx_spi_messages(lp);
+	mcr20a_setup_irq_spi_messages(lp);
+
+	/* setup regmap */
+	lp->regmap_dar = devm_regmap_init_spi(spi, &mcr20a_dar_regmap);
+	if (IS_ERR(lp->regmap_dar)) {
+		ret = PTR_ERR(lp->regmap_dar);
+		dev_err(&spi->dev, "Failed to allocate dar map: %d\n",
+			ret);
+		goto free_dev;
+	}
+
+	lp->regmap_iar = devm_regmap_init_spi(spi, &mcr20a_iar_regmap);
+	if (IS_ERR(lp->regmap_iar)) {
+		ret = PTR_ERR(lp->regmap_iar);
+		dev_err(&spi->dev, "Failed to allocate iar map: %d\n", ret);
+		goto free_dev;
+	}
+
+	mcr20a_hw_setup(lp);
+
+	spi_set_drvdata(spi, lp);
+
+	ret = mcr20a_phy_init(lp);
+	if (ret < 0) {
+		dev_crit(&spi->dev, "mcr20a_phy_init failed\n");
+		goto free_dev;
+	}
+
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_FALLING;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, mcr20a_irq_isr,
+			       irq_type, dev_name(&spi->dev), lp);
+	if (ret) {
+		dev_err(&spi->dev, "could not request_irq for mcr20a\n");
+		ret = -ENODEV;
+		goto free_dev;
+	}
+
+	/* disable_irq by default and wait for starting hardware */
+	disable_irq(spi->irq);
+
+	ret = ieee802154_register_hw(hw);
+	if (ret) {
+		dev_crit(&spi->dev, "ieee802154_register_hw failed\n");
+		goto free_dev;
+	}
+
+	return ret;
+
+free_dev:
+	ieee802154_free_hw(lp->hw);
+
+	return ret;
+}
+
+static int mcr20a_remove(struct spi_device *spi)
+{
+	struct mcr20a_local *lp = spi_get_drvdata(spi);
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	ieee802154_unregister_hw(lp->hw);
+	ieee802154_free_hw(lp->hw);
+
+	return 0;
+}
+
+static const struct of_device_id mcr20a_of_match[] = {
+	{ .compatible = "nxp,mcr20a", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mcr20a_of_match);
+
+static const struct spi_device_id mcr20a_device_id[] = {
+	{ .name = "mcr20a", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, mcr20a_device_id);
+
+static struct spi_driver mcr20a_driver = {
+	.id_table = mcr20a_device_id,
+	.driver = {
+		.of_match_table = of_match_ptr(mcr20a_of_match),
+		.name	= "mcr20a",
+	},
+	.probe      = mcr20a_probe,
+	.remove     = mcr20a_remove,
+};
+
+module_spi_driver(mcr20a_driver);
+
+MODULE_DESCRIPTION("MCR20A Transceiver Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xue Liu <liuxuenetmail@gmail>");
diff --git a/drivers/net/ieee802154/mcr20a.h b/drivers/net/ieee802154/mcr20a.h
new file mode 100644
index 000000000000..6da4fd00b3c5
--- /dev/null
+++ b/drivers/net/ieee802154/mcr20a.h
@@ -0,0 +1,498 @@
+/*
+ * Driver for NXP MCR20A 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2018 Xue Liu <liuxuenetmail@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _MCR20A_H
+#define _MCR20A_H
+
+/* Direct Accress Register */
+#define DAR_IRQ_STS1		0x00
+#define DAR_IRQ_STS2		0x01
+#define DAR_IRQ_STS3		0x02
+#define DAR_PHY_CTRL1		0x03
+#define DAR_PHY_CTRL2		0x04
+#define DAR_PHY_CTRL3		0x05
+#define DAR_RX_FRM_LEN		0x06
+#define DAR_PHY_CTRL4		0x07
+#define DAR_SRC_CTRL		0x08
+#define DAR_SRC_ADDRS_SUM_LSB	0x09
+#define DAR_SRC_ADDRS_SUM_MSB	0x0A
+#define DAR_CCA1_ED_FNL		0x0B
+#define DAR_EVENT_TMR_LSB	0x0C
+#define DAR_EVENT_TMR_MSB	0x0D
+#define DAR_EVENT_TMR_USB	0x0E
+#define DAR_TIMESTAMP_LSB	0x0F
+#define DAR_TIMESTAMP_MSB	0x10
+#define DAR_TIMESTAMP_USB	0x11
+#define DAR_T3CMP_LSB		0x12
+#define DAR_T3CMP_MSB		0x13
+#define DAR_T3CMP_USB		0x14
+#define DAR_T2PRIMECMP_LSB	0x15
+#define DAR_T2PRIMECMP_MSB	0x16
+#define DAR_T1CMP_LSB		0x17
+#define DAR_T1CMP_MSB		0x18
+#define DAR_T1CMP_USB		0x19
+#define DAR_T2CMP_LSB		0x1A
+#define DAR_T2CMP_MSB		0x1B
+#define DAR_T2CMP_USB		0x1C
+#define DAR_T4CMP_LSB		0x1D
+#define DAR_T4CMP_MSB		0x1E
+#define DAR_T4CMP_USB		0x1F
+#define DAR_PLL_INT0		0x20
+#define DAR_PLL_FRAC0_LSB	0x21
+#define DAR_PLL_FRAC0_MSB	0x22
+#define DAR_PA_PWR		0x23
+#define DAR_SEQ_STATE		0x24
+#define DAR_LQI_VALUE		0x25
+#define DAR_RSSI_CCA_CONT	0x26
+/*------------------            0x27 */
+#define DAR_ASM_CTRL1		0x28
+#define DAR_ASM_CTRL2		0x29
+#define DAR_ASM_DATA_0		0x2A
+#define DAR_ASM_DATA_1		0x2B
+#define DAR_ASM_DATA_2		0x2C
+#define DAR_ASM_DATA_3		0x2D
+#define DAR_ASM_DATA_4		0x2E
+#define DAR_ASM_DATA_5		0x2F
+#define DAR_ASM_DATA_6		0x30
+#define DAR_ASM_DATA_7		0x31
+#define DAR_ASM_DATA_8		0x32
+#define DAR_ASM_DATA_9		0x33
+#define DAR_ASM_DATA_A		0x34
+#define DAR_ASM_DATA_B		0x35
+#define DAR_ASM_DATA_C		0x36
+#define DAR_ASM_DATA_D		0x37
+#define DAR_ASM_DATA_E		0x38
+#define DAR_ASM_DATA_F		0x39
+/*-----------------------       0x3A */
+#define DAR_OVERWRITE_VER	0x3B
+#define DAR_CLK_OUT_CTRL	0x3C
+#define DAR_PWR_MODES		0x3D
+#define IAR_INDEX		0x3E
+#define IAR_DATA		0x3F
+
+/* Indirect Resgister Memory */
+#define IAR_PART_ID		0x00
+#define IAR_XTAL_TRIM		0x01
+#define IAR_PMC_LP_TRIM		0x02
+#define IAR_MACPANID0_LSB	0x03
+#define IAR_MACPANID0_MSB	0x04
+#define IAR_MACSHORTADDRS0_LSB	0x05
+#define IAR_MACSHORTADDRS0_MSB	0x06
+#define IAR_MACLONGADDRS0_0	0x07
+#define IAR_MACLONGADDRS0_8	0x08
+#define IAR_MACLONGADDRS0_16	0x09
+#define IAR_MACLONGADDRS0_24	0x0A
+#define IAR_MACLONGADDRS0_32	0x0B
+#define IAR_MACLONGADDRS0_40	0x0C
+#define IAR_MACLONGADDRS0_48	0x0D
+#define IAR_MACLONGADDRS0_56	0x0E
+#define IAR_RX_FRAME_FILTER	0x0F
+#define IAR_PLL_INT1		0x10
+#define IAR_PLL_FRAC1_LSB	0x11
+#define IAR_PLL_FRAC1_MSB	0x12
+#define IAR_MACPANID1_LSB	0x13
+#define IAR_MACPANID1_MSB	0x14
+#define IAR_MACSHORTADDRS1_LSB	0x15
+#define IAR_MACSHORTADDRS1_MSB	0x16
+#define IAR_MACLONGADDRS1_0	0x17
+#define IAR_MACLONGADDRS1_8	0x18
+#define IAR_MACLONGADDRS1_16	0x19
+#define IAR_MACLONGADDRS1_24	0x1A
+#define IAR_MACLONGADDRS1_32	0x1B
+#define IAR_MACLONGADDRS1_40	0x1C
+#define IAR_MACLONGADDRS1_48	0x1D
+#define IAR_MACLONGADDRS1_56	0x1E
+#define IAR_DUAL_PAN_CTRL	0x1F
+#define IAR_DUAL_PAN_DWELL	0x20
+#define IAR_DUAL_PAN_STS	0x21
+#define IAR_CCA1_THRESH		0x22
+#define IAR_CCA1_ED_OFFSET_COMP	0x23
+#define IAR_LQI_OFFSET_COMP	0x24
+#define IAR_CCA_CTRL		0x25
+#define IAR_CCA2_CORR_PEAKS	0x26
+#define IAR_CCA2_CORR_THRESH	0x27
+#define IAR_TMR_PRESCALE	0x28
+/*--------------------          0x29 */
+#define IAR_GPIO_DATA		0x2A
+#define IAR_GPIO_DIR		0x2B
+#define IAR_GPIO_PUL_EN		0x2C
+#define IAR_GPIO_PUL_SEL	0x2D
+#define IAR_GPIO_DS		0x2E
+/*------------------            0x2F */
+#define IAR_ANT_PAD_CTRL	0x30
+#define IAR_MISC_PAD_CTRL	0x31
+#define IAR_BSM_CTRL		0x32
+/*-------------------           0x33 */
+#define IAR_RNG			0x34
+#define IAR_RX_BYTE_COUNT	0x35
+#define IAR_RX_WTR_MARK		0x36
+#define IAR_SOFT_RESET		0x37
+#define IAR_TXDELAY		0x38
+#define IAR_ACKDELAY		0x39
+#define IAR_SEQ_MGR_CTRL	0x3A
+#define IAR_SEQ_MGR_STS		0x3B
+#define IAR_SEQ_T_STS		0x3C
+#define IAR_ABORT_STS		0x3D
+#define IAR_CCCA_BUSY_CNT	0x3E
+#define IAR_SRC_ADDR_CHECKSUM1	0x3F
+#define IAR_SRC_ADDR_CHECKSUM2	0x40
+#define IAR_SRC_TBL_VALID1	0x41
+#define IAR_SRC_TBL_VALID2	0x42
+#define IAR_FILTERFAIL_CODE1	0x43
+#define IAR_FILTERFAIL_CODE2	0x44
+#define IAR_SLOT_PRELOAD	0x45
+/*--------------------          0x46 */
+#define IAR_CORR_VT		0x47
+#define IAR_SYNC_CTRL		0x48
+#define IAR_PN_LSB_0		0x49
+#define IAR_PN_LSB_1		0x4A
+#define IAR_PN_MSB_0		0x4B
+#define IAR_PN_MSB_1		0x4C
+#define IAR_CORR_NVAL		0x4D
+#define IAR_TX_MODE_CTRL	0x4E
+#define IAR_SNF_THR		0x4F
+#define IAR_FAD_THR		0x50
+#define IAR_ANT_AGC_CTRL	0x51
+#define IAR_AGC_THR1		0x52
+#define IAR_AGC_THR2		0x53
+#define IAR_AGC_HYS		0x54
+#define IAR_AFC			0x55
+/*-------------------           0x56 */
+/*-------------------           0x57 */
+#define IAR_PHY_STS		0x58
+#define IAR_RX_MAX_CORR		0x59
+#define IAR_RX_MAX_PREAMBLE	0x5A
+#define IAR_RSSI		0x5B
+/*-------------------           0x5C */
+/*-------------------           0x5D */
+#define IAR_PLL_DIG_CTRL	0x5E
+#define IAR_VCO_CAL		0x5F
+#define IAR_VCO_BEST_DIFF	0x60
+#define IAR_VCO_BIAS		0x61
+#define IAR_KMOD_CTRL		0x62
+#define IAR_KMOD_CAL		0x63
+#define IAR_PA_CAL		0x64
+#define IAR_PA_PWRCAL		0x65
+#define IAR_ATT_RSSI1		0x66
+#define IAR_ATT_RSSI2		0x67
+#define IAR_RSSI_OFFSET		0x68
+#define IAR_RSSI_SLOPE		0x69
+#define IAR_RSSI_CAL1		0x6A
+#define IAR_RSSI_CAL2		0x6B
+/*-------------------           0x6C */
+/*-------------------           0x6D */
+#define IAR_XTAL_CTRL		0x6E
+#define IAR_XTAL_COMP_MIN	0x6F
+#define IAR_XTAL_COMP_MAX	0x70
+#define IAR_XTAL_GM		0x71
+/*-------------------           0x72 */
+/*-------------------           0x73 */
+#define IAR_LNA_TUNE		0x74
+#define IAR_LNA_AGCGAIN		0x75
+/*-------------------           0x76 */
+/*-------------------           0x77 */
+#define IAR_CHF_PMA_GAIN	0x78
+#define IAR_CHF_IBUF		0x79
+#define IAR_CHF_QBUF		0x7A
+#define IAR_CHF_IRIN		0x7B
+#define IAR_CHF_QRIN		0x7C
+#define IAR_CHF_IL		0x7D
+#define IAR_CHF_QL		0x7E
+#define IAR_CHF_CC1		0x7F
+#define IAR_CHF_CCL		0x80
+#define IAR_CHF_CC2		0x81
+#define IAR_CHF_IROUT		0x82
+#define IAR_CHF_QROUT		0x83
+/*-------------------           0x84 */
+/*-------------------           0x85 */
+#define IAR_RSSI_CTRL		0x86
+/*-------------------           0x87 */
+/*-------------------           0x88 */
+#define IAR_PA_BIAS		0x89
+#define IAR_PA_TUNING		0x8A
+/*-------------------           0x8B */
+/*-------------------           0x8C */
+#define IAR_PMC_HP_TRIM		0x8D
+#define IAR_VREGA_TRIM		0x8E
+/*-------------------           0x8F */
+/*-------------------           0x90 */
+#define IAR_VCO_CTRL1		0x91
+#define IAR_VCO_CTRL2		0x92
+/*-------------------           0x93 */
+/*-------------------           0x94 */
+#define IAR_ANA_SPARE_OUT1	0x95
+#define IAR_ANA_SPARE_OUT2	0x96
+#define IAR_ANA_SPARE_IN	0x97
+#define IAR_MISCELLANEOUS	0x98
+/*-------------------           0x99 */
+#define IAR_SEQ_MGR_OVRD0	0x9A
+#define IAR_SEQ_MGR_OVRD1	0x9B
+#define IAR_SEQ_MGR_OVRD2	0x9C
+#define IAR_SEQ_MGR_OVRD3	0x9D
+#define IAR_SEQ_MGR_OVRD4	0x9E
+#define IAR_SEQ_MGR_OVRD5	0x9F
+#define IAR_SEQ_MGR_OVRD6	0xA0
+#define IAR_SEQ_MGR_OVRD7	0xA1
+/*-------------------           0xA2 */
+#define IAR_TESTMODE_CTRL	0xA3
+#define IAR_DTM_CTRL1		0xA4
+#define IAR_DTM_CTRL2		0xA5
+#define IAR_ATM_CTRL1		0xA6
+#define IAR_ATM_CTRL2		0xA7
+#define IAR_ATM_CTRL3		0xA8
+/*-------------------           0xA9 */
+#define IAR_LIM_FE_TEST_CTRL	0xAA
+#define IAR_CHF_TEST_CTRL	0xAB
+#define IAR_VCO_TEST_CTRL	0xAC
+#define IAR_PLL_TEST_CTRL	0xAD
+#define IAR_PA_TEST_CTRL	0xAE
+#define IAR_PMC_TEST_CTRL	0xAF
+#define IAR_SCAN_DTM_PROTECT_1	0xFE
+#define IAR_SCAN_DTM_PROTECT_0	0xFF
+
+/* IRQSTS1 bits */
+#define DAR_IRQSTS1_RX_FRM_PEND		BIT(7)
+#define DAR_IRQSTS1_PLL_UNLOCK_IRQ	BIT(6)
+#define DAR_IRQSTS1_FILTERFAIL_IRQ	BIT(5)
+#define DAR_IRQSTS1_RXWTRMRKIRQ		BIT(4)
+#define DAR_IRQSTS1_CCAIRQ		BIT(3)
+#define DAR_IRQSTS1_RXIRQ		BIT(2)
+#define DAR_IRQSTS1_TXIRQ		BIT(1)
+#define DAR_IRQSTS1_SEQIRQ		BIT(0)
+
+/* IRQSTS2 bits */
+#define DAR_IRQSTS2_CRCVALID		BIT(7)
+#define DAR_IRQSTS2_CCA			BIT(6)
+#define DAR_IRQSTS2_SRCADDR		BIT(5)
+#define DAR_IRQSTS2_PI			BIT(4)
+#define DAR_IRQSTS2_TMRSTATUS		BIT(3)
+#define DAR_IRQSTS2_ASM_IRQ		BIT(2)
+#define DAR_IRQSTS2_PB_ERR_IRQ		BIT(1)
+#define DAR_IRQSTS2_WAKE_IRQ		BIT(0)
+
+/* IRQSTS3 bits */
+#define DAR_IRQSTS3_TMR4MSK		BIT(7)
+#define DAR_IRQSTS3_TMR3MSK		BIT(6)
+#define DAR_IRQSTS3_TMR2MSK		BIT(5)
+#define DAR_IRQSTS3_TMR1MSK		BIT(4)
+#define DAR_IRQSTS3_TMR4IRQ		BIT(3)
+#define DAR_IRQSTS3_TMR3IRQ		BIT(2)
+#define DAR_IRQSTS3_TMR2IRQ		BIT(1)
+#define DAR_IRQSTS3_TMR1IRQ		BIT(0)
+
+/* PHY_CTRL1 bits */
+#define DAR_PHY_CTRL1_TMRTRIGEN		BIT(7)
+#define DAR_PHY_CTRL1_SLOTTED		BIT(6)
+#define DAR_PHY_CTRL1_CCABFRTX		BIT(5)
+#define DAR_PHY_CTRL1_CCABFRTX_SHIFT	5
+#define DAR_PHY_CTRL1_RXACKRQD		BIT(4)
+#define DAR_PHY_CTRL1_AUTOACK		BIT(3)
+#define DAR_PHY_CTRL1_XCVSEQ_MASK	0x07
+
+/* PHY_CTRL2 bits */
+#define DAR_PHY_CTRL2_CRC_MSK		BIT(7)
+#define DAR_PHY_CTRL2_PLL_UNLOCK_MSK	BIT(6)
+#define DAR_PHY_CTRL2_FILTERFAIL_MSK	BIT(5)
+#define DAR_PHY_CTRL2_RX_WMRK_MSK	BIT(4)
+#define DAR_PHY_CTRL2_CCAMSK		BIT(3)
+#define DAR_PHY_CTRL2_RXMSK		BIT(2)
+#define DAR_PHY_CTRL2_TXMSK		BIT(1)
+#define DAR_PHY_CTRL2_SEQMSK		BIT(0)
+
+/* PHY_CTRL3 bits */
+#define DAR_PHY_CTRL3_TMR4CMP_EN	BIT(7)
+#define DAR_PHY_CTRL3_TMR3CMP_EN	BIT(6)
+#define DAR_PHY_CTRL3_TMR2CMP_EN	BIT(5)
+#define DAR_PHY_CTRL3_TMR1CMP_EN	BIT(4)
+#define DAR_PHY_CTRL3_ASM_MSK		BIT(2)
+#define DAR_PHY_CTRL3_PB_ERR_MSK	BIT(1)
+#define DAR_PHY_CTRL3_WAKE_MSK		BIT(0)
+
+/* RX_FRM_LEN bits */
+#define DAR_RX_FRAME_LENGTH_MASK	(0x7F)
+
+/* PHY_CTRL4 bits */
+#define DAR_PHY_CTRL4_TRCV_MSK		BIT(7)
+#define DAR_PHY_CTRL4_TC3TMOUT		BIT(6)
+#define DAR_PHY_CTRL4_PANCORDNTR0	BIT(5)
+#define DAR_PHY_CTRL4_CCATYPE		(3)
+#define DAR_PHY_CTRL4_CCATYPE_SHIFT	(3)
+#define DAR_PHY_CTRL4_CCATYPE_MASK	(0x18)
+#define DAR_PHY_CTRL4_TMRLOAD		BIT(2)
+#define DAR_PHY_CTRL4_PROMISCUOUS	BIT(1)
+#define DAR_PHY_CTRL4_TC2PRIME_EN	BIT(0)
+
+/* SRC_CTRL bits */
+#define DAR_SRC_CTRL_INDEX		(0x0F)
+#define DAR_SRC_CTRL_INDEX_SHIFT	(4)
+#define DAR_SRC_CTRL_ACK_FRM_PND	BIT(3)
+#define DAR_SRC_CTRL_SRCADDR_EN		BIT(2)
+#define DAR_SRC_CTRL_INDEX_EN		BIT(1)
+#define DAR_SRC_CTRL_INDEX_DISABLE	BIT(0)
+
+/* DAR_ASM_CTRL1 bits */
+#define DAR_ASM_CTRL1_CLEAR		BIT(7)
+#define DAR_ASM_CTRL1_START		BIT(6)
+#define DAR_ASM_CTRL1_SELFTST		BIT(5)
+#define DAR_ASM_CTRL1_CTR		BIT(4)
+#define DAR_ASM_CTRL1_CBC		BIT(3)
+#define DAR_ASM_CTRL1_AES		BIT(2)
+#define DAR_ASM_CTRL1_LOAD_MAC		BIT(1)
+
+/* DAR_ASM_CTRL2 bits */
+#define DAR_ASM_CTRL2_DATA_REG_TYPE_SEL		(7)
+#define DAR_ASM_CTRL2_DATA_REG_TYPE_SEL_SHIFT	(5)
+#define DAR_ASM_CTRL2_TSTPAS			BIT(1)
+
+/* DAR_CLK_OUT_CTRL bits */
+#define DAR_CLK_OUT_CTRL_EXTEND		BIT(7)
+#define DAR_CLK_OUT_CTRL_HIZ		BIT(6)
+#define DAR_CLK_OUT_CTRL_SR		BIT(5)
+#define DAR_CLK_OUT_CTRL_DS		BIT(4)
+#define DAR_CLK_OUT_CTRL_EN		BIT(3)
+#define DAR_CLK_OUT_CTRL_DIV		(7)
+
+/* DAR_PWR_MODES bits */
+#define DAR_PWR_MODES_XTAL_READY	BIT(5)
+#define DAR_PWR_MODES_XTALEN		BIT(4)
+#define DAR_PWR_MODES_ASM_CLK_EN	BIT(3)
+#define DAR_PWR_MODES_AUTODOZE		BIT(1)
+#define DAR_PWR_MODES_PMC_MODE		BIT(0)
+
+/* RX_FRAME_FILTER bits */
+#define IAR_RX_FRAME_FLT_FRM_VER		(0xC0)
+#define IAR_RX_FRAME_FLT_FRM_VER_SHIFT		(6)
+#define IAR_RX_FRAME_FLT_ACTIVE_PROMISCUOUS	BIT(5)
+#define IAR_RX_FRAME_FLT_NS_FT			BIT(4)
+#define IAR_RX_FRAME_FLT_CMD_FT			BIT(3)
+#define IAR_RX_FRAME_FLT_ACK_FT			BIT(2)
+#define IAR_RX_FRAME_FLT_DATA_FT		BIT(1)
+#define IAR_RX_FRAME_FLT_BEACON_FT		BIT(0)
+
+/* DUAL_PAN_CTRL bits */
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK	(0xF0)
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_SHIFT	(4)
+#define IAR_DUAL_PAN_CTRL_CURRENT_NETWORK	BIT(3)
+#define IAR_DUAL_PAN_CTRL_PANCORDNTR1		BIT(2)
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_AUTO		BIT(1)
+#define IAR_DUAL_PAN_CTRL_ACTIVE_NETWORK	BIT(0)
+
+/* DUAL_PAN_STS bits */
+#define IAR_DUAL_PAN_STS_RECD_ON_PAN1		BIT(7)
+#define IAR_DUAL_PAN_STS_RECD_ON_PAN0		BIT(6)
+#define IAR_DUAL_PAN_STS_DUAL_PAN_REMAIN	(0x3F)
+
+/* CCA_CTRL bits */
+#define IAR_CCA_CTRL_AGC_FRZ_EN			BIT(6)
+#define IAR_CCA_CTRL_CONT_RSSI_EN		BIT(5)
+#define IAR_CCA_CTRL_LQI_RSSI_NOT_CORR	BIT(4)
+#define IAR_CCA_CTRL_CCA3_AND_NOT_OR	BIT(3)
+#define IAR_CCA_CTRL_POWER_COMP_EN_LQI	BIT(2)
+#define IAR_CCA_CTRL_POWER_COMP_EN_ED	BIT(1)
+#define IAR_CCA_CTRL_POWER_COMP_EN_CCA1	BIT(0)
+
+/* ANT_PAD_CTRL bits */
+#define IAR_ANT_PAD_CTRL_ANTX_POL	(0x0F)
+#define IAR_ANT_PAD_CTRL_ANTX_POL_SHIFT	(4)
+#define IAR_ANT_PAD_CTRL_ANTX_CTRLMODE	BIT(3)
+#define IAR_ANT_PAD_CTRL_ANTX_HZ	BIT(2)
+#define IAR_ANT_PAD_CTRL_ANTX_EN	(3)
+
+/* MISC_PAD_CTRL bits */
+#define IAR_MISC_PAD_CTRL_MISO_HIZ_EN	BIT(3)
+#define IAR_MISC_PAD_CTRL_IRQ_B_OD	BIT(2)
+#define IAR_MISC_PAD_CTRL_NON_GPIO_DS	BIT(1)
+#define IAR_MISC_PAD_CTRL_ANTX_CURR	(1)
+
+/* ANT_AGC_CTRL bits */
+#define IAR_ANT_AGC_CTRL_FAD_EN_SHIFT	(0)
+#define IAR_ANT_AGC_CTRL_FAD_EN_MASK	(1)
+#define IAR_ANT_AGC_CTRL_ANTX_SHIFT	(1)
+#define IAR_ANT_AGC_CTRL_ANTX_MASK	BIT(AR_ANT_AGC_CTRL_ANTX_SHIFT)
+
+/* BSM_CTRL bits */
+#define BSM_CTRL_BSM_EN		(1)
+
+/* SOFT_RESET bits */
+#define IAR_SOFT_RESET_SOG_RST		BIT(7)
+#define IAR_SOFT_RESET_REGS_RST		BIT(4)
+#define IAR_SOFT_RESET_PLL_RST		BIT(3)
+#define IAR_SOFT_RESET_TX_RST		BIT(2)
+#define IAR_SOFT_RESET_RX_RST		BIT(1)
+#define IAR_SOFT_RESET_SEQ_MGR_RST	BIT(0)
+
+/* SEQ_MGR_CTRL bits */
+#define IAR_SEQ_MGR_CTRL_SEQ_STATE_CTRL		(3)
+#define IAR_SEQ_MGR_CTRL_SEQ_STATE_CTRL_SHIFT	(6)
+#define IAR_SEQ_MGR_CTRL_NO_RX_RECYCLE		BIT(5)
+#define IAR_SEQ_MGR_CTRL_LATCH_PREAMBLE		BIT(4)
+#define IAR_SEQ_MGR_CTRL_EVENT_TMR_DO_NOT_LATCH	BIT(3)
+#define IAR_SEQ_MGR_CTRL_CLR_NEW_SEQ_INHIBIT	BIT(2)
+#define IAR_SEQ_MGR_CTRL_PSM_LOCK_DIS		BIT(1)
+#define IAR_SEQ_MGR_CTRL_PLL_ABORT_OVRD		BIT(0)
+
+/* SEQ_MGR_STS bits */
+#define IAR_SEQ_MGR_STS_TMR2_SEQ_TRIG_ARMED	BIT(7)
+#define IAR_SEQ_MGR_STS_RX_MODE			BIT(6)
+#define IAR_SEQ_MGR_STS_RX_TIMEOUT_PENDING	BIT(5)
+#define IAR_SEQ_MGR_STS_NEW_SEQ_INHIBIT		BIT(4)
+#define IAR_SEQ_MGR_STS_SEQ_IDLE		BIT(3)
+#define IAR_SEQ_MGR_STS_XCVSEQ_ACTUAL		(7)
+
+/* ABORT_STS bits */
+#define IAR_ABORT_STS_PLL_ABORTED	BIT(2)
+#define IAR_ABORT_STS_TC3_ABORTED	BIT(1)
+#define IAR_ABORT_STS_SW_ABORTED	BIT(0)
+
+/* IAR_FILTERFAIL_CODE2 bits */
+#define IAR_FILTERFAIL_CODE2_PAN_SEL	BIT(7)
+#define IAR_FILTERFAIL_CODE2_9_8	(3)
+
+/* PHY_STS bits */
+#define IAR_PHY_STS_PLL_UNLOCK		BIT(7)
+#define IAR_PHY_STS_PLL_LOCK_ERR	BIT(6)
+#define IAR_PHY_STS_PLL_LOCK		BIT(5)
+#define IAR_PHY_STS_CRCVALID		BIT(3)
+#define IAR_PHY_STS_FILTERFAIL_FLAG_SEL	BIT(2)
+#define IAR_PHY_STS_SFD_DET		BIT(1)
+#define IAR_PHY_STS_PREAMBLE_DET	BIT(0)
+
+/* TESTMODE_CTRL bits */
+#define IAR_TEST_MODE_CTRL_HOT_ANT		BIT(4)
+#define IAR_TEST_MODE_CTRL_IDEAL_RSSI_EN	BIT(3)
+#define IAR_TEST_MODE_CTRL_IDEAL_PFC_EN		BIT(2)
+#define IAR_TEST_MODE_CTRL_CONTINUOUS_EN	BIT(1)
+#define IAR_TEST_MODE_CTRL_FPGA_EN		BIT(0)
+
+/* DTM_CTRL1 bits */
+#define IAR_DTM_CTRL1_ATM_LOCKED	BIT(7)
+#define IAR_DTM_CTRL1_DTM_EN		BIT(6)
+#define IAR_DTM_CTRL1_PAGE5		BIT(5)
+#define IAR_DTM_CTRL1_PAGE4		BIT(4)
+#define IAR_DTM_CTRL1_PAGE3		BIT(3)
+#define IAR_DTM_CTRL1_PAGE2		BIT(2)
+#define IAR_DTM_CTRL1_PAGE1		BIT(1)
+#define IAR_DTM_CTRL1_PAGE0		BIT(0)
+
+/* TX_MODE_CTRL */
+#define IAR_TX_MODE_CTRL_TX_INV		BIT(4)
+#define IAR_TX_MODE_CTRL_BT_EN		BIT(3)
+#define IAR_TX_MODE_CTRL_DTS2		BIT(2)
+#define IAR_TX_MODE_CTRL_DTS1		BIT(1)
+#define IAR_TX_MODE_CTRL_DTS0		BIT(0)
+
+#define TX_MODE_CTRL_DTS_MASK	(7)
+
+#endif /* _MCR20A_H */
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index 974765b7d92a..e4f305320519 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c
@@ -104,6 +104,7 @@ static void lowpan_setup(struct net_device *ldev)
 	/* We need an ipv6hdr as minimum len when calling xmit */
 	ldev->hard_header_len	= sizeof(struct ipv6hdr);
 	ldev->flags		= IFF_BROADCAST | IFF_MULTICAST;
+	ldev->priv_flags	|= IFF_NO_QUEUE;
 
 	ldev->netdev_ops	= &lowpan_netdev_ops;
 	ldev->header_ops	= &lowpan_header_ops;