diff options
author | David S. Miller <davem@davemloft.net> | 2020-05-22 16:13:10 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-05-22 16:13:10 -0700 |
commit | a74707396c9185cbbca0ae0a115b95b5a8b6bfa1 (patch) | |
tree | 979cc44a50e6c0da8ac948aafea507d8b364f24f | |
parent | 593532668f635d19d207510e0fbb5c2250f56b6f (diff) | |
parent | 0eaf8ccf2047d60f8725d3cfa005ee6170f1fdce (diff) |
Merge branch 'DP83869-Enhancements'
Dan Murphy says:
====================
DP83869 Enhancements
These are improvements to the DP83869 Ethernet PHY driver. OP-mode and port
mirroring may be strapped on the device but the software only retrives these
settings from the device tree. Reading the straps and initializing the
associated stored variables so when setting the PHY up and down the PHY's
configuration values will be retained.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/phy/dp83869.c | 36 |
1 files changed, 32 insertions, 4 deletions
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index 7996a4aea8d2..cfb22a21a2e6 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -65,7 +65,9 @@ #define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0) /* STRAP_STS1 bits */ +#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0) #define DP83869_STRAP_STS1_RESERVED BIT(11) +#define DP83869_STRAP_MIRROR_ENABLED BIT(12) /* PHYCTRL bits */ #define DP83869_RX_FIFO_SHIFT 12 @@ -160,6 +162,20 @@ static int dp83869_config_port_mirroring(struct phy_device *phydev) DP83869_CFG3_PORT_MIRROR_EN); } +static int dp83869_set_strapped_mode(struct phy_device *phydev) +{ + struct dp83869_private *dp83869 = phydev->priv; + int val; + + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); + if (val < 0) + return val; + + dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK; + + return 0; +} + #ifdef CONFIG_OF_MDIO static int dp83869_of_init(struct phy_device *phydev) { @@ -184,6 +200,10 @@ static int dp83869_of_init(struct phy_device *phydev) if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET || dp83869->mode > DP83869_SGMII_COPPER_ETHERNET) return -EINVAL; + } else { + ret = dp83869_set_strapped_mode(phydev); + if (ret) + return ret; } if (of_property_read_bool(of_node, "ti,max-output-impedance")) @@ -191,10 +211,18 @@ static int dp83869_of_init(struct phy_device *phydev) else if (of_property_read_bool(of_node, "ti,min-output-impedance")) dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN; - if (of_property_read_bool(of_node, "enet-phy-lane-swap")) + if (of_property_read_bool(of_node, "enet-phy-lane-swap")) { dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; - else - dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; + } else { + /* If the lane swap is not in the DT then check the straps */ + ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); + if (ret < 0) + return ret; + if (ret & DP83869_STRAP_MIRROR_ENABLED) + dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; + else + dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; + } if (of_property_read_u32(of_node, "rx-fifo-depth", &dp83869->rx_fifo_depth)) @@ -209,7 +237,7 @@ static int dp83869_of_init(struct phy_device *phydev) #else static int dp83869_of_init(struct phy_device *phydev) { - return 0; + return dp83869_set_strapped_mode(phydev); } #endif /* CONFIG_OF_MDIO */ |