Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-11-04

This series contains updates to ixgbe and ixgbevf only.

Don does cleanup and configuration for our X553 devices, related to LED,
auto-negotiation, flow control and SFP+ setup and config.  Adds the
(not secret) sauce for B0 hardware for X553 hardware.

Emil provides several fixes, first replaces the driver specific MDIO
defines for the more preferred equivalent kernel ones.  Provides a fix
for auto-negotiaion status, by reading a PHY register twice.  Introduces
ixgbe_link_operations structure to allow X550EM_a to override the
methods for MDIO access while X550EM_x provides methods to use I2C
combined access.

Mark fixes an issue where the driver was crashing when msix_entires
were not there because they were freed by a previous suspend or remove.

Sowmini Varadhan fixes an issue where an incorrect check for IPPROTO_UDP
in ixgbe_atr().  Then makes sure that the network and transport headers
in the paged data are available in the headlen bytes to calculate the
l4_proto.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

13 files changed, 819 insertions, 374 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index b06e32d0d22a..ef81c3d8c295 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -1027,4 +1027,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 				  struct ixgbe_ring *tx_ring);
 u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter);
 void ixgbe_store_reta(struct ixgbe_adapter *adapter);
+s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+		       u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
 #endif /* _IXGBE_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index fb51be74dd4c..805ab319e578 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -367,7 +367,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
 	}
 
 	/* Negotiate the fc mode to use */
-	ixgbe_fc_autoneg(hw);
+	hw->mac.ops.fc_autoneg(hw);
 
 	/* Disable any previous flow control settings */
 	fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
@@ -1179,6 +1179,7 @@ static const struct ixgbe_mac_operations mac_ops_82598 = {
 	.get_link_capabilities	= &ixgbe_get_link_capabilities_82598,
 	.led_on			= &ixgbe_led_on_generic,
 	.led_off		= &ixgbe_led_off_generic,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.blink_led_start	= &ixgbe_blink_led_start_generic,
 	.blink_led_stop		= &ixgbe_blink_led_stop_generic,
 	.set_rar		= &ixgbe_set_rar_generic,
@@ -1193,6 +1194,7 @@ static const struct ixgbe_mac_operations mac_ops_82598 = {
 	.set_vfta		= &ixgbe_set_vfta_82598,
 	.fc_enable		= &ixgbe_fc_enable_82598,
 	.setup_fc		= ixgbe_setup_fc_generic,
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.set_fw_drv_ver         = NULL,
 	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
 	.release_swfw_sync      = &ixgbe_release_swfw_sync,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 63b25006ac90..e00aaeb91827 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -2204,6 +2204,7 @@ static const struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.blink_led_start        = &ixgbe_blink_led_start_generic,
 	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
 	.set_rar                = &ixgbe_set_rar_generic,
@@ -2219,6 +2220,7 @@ static const struct ixgbe_mac_operations mac_ops_82599 = {
 	.set_vfta               = &ixgbe_set_vfta_generic,
 	.fc_enable              = &ixgbe_fc_enable_generic,
 	.setup_fc		= ixgbe_setup_fc_generic,
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
 	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
 	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 77d3039283f6..8832df3eba25 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -298,10 +298,12 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
 	IXGBE_WRITE_FLUSH(hw);
 
-	/* Setup flow control */
-	ret_val = hw->mac.ops.setup_fc(hw);
-	if (ret_val)
-		return ret_val;
+	/* Setup flow control if method for doing so */
+	if (hw->mac.ops.setup_fc) {
+		ret_val = hw->mac.ops.setup_fc(hw);
+		if (ret_val)
+			return ret_val;
+	}
 
 	/* Cashe bit indicating need for crosstalk fix */
 	switch (hw->mac.type) {
@@ -390,6 +392,9 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
 		status = hw->mac.ops.start_hw(hw);
 	}
 
+	/* Initialize the LED link active for LED blink support */
+	hw->mac.ops.init_led_link_act(hw);
+
 	return status;
 }
 
@@ -773,6 +778,49 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ *  @hw: pointer to hardware structure
+ *
+ *  Store the index for the link active LED. This will be used to support
+ *  blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	u32 led_reg, led_mode;
+	u16 i;
+
+	led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* Get LED link active from the LEDCTL register */
+	for (i = 0; i < 4; i++) {
+		led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+		if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+		    IXGBE_LED_LINK_ACTIVE) {
+			mac->led_link_act = i;
+			return 0;
+		}
+	}
+
+	/* If LEDCTL register does not have the LED link active set, then use
+	 * known MAC defaults.
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_x550em_a:
+		mac->led_link_act = 0;
+		break;
+	case ixgbe_mac_X550EM_x:
+		mac->led_link_act = 1;
+		break;
+	default:
+		mac->led_link_act = 2;
+	}
+
+	return 0;
+}
+
+/**
  *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
  *  @hw: pointer to hardware structure
  *  @index: led number to turn on
@@ -2127,7 +2175,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Negotiate the fc mode to use */
-	ixgbe_fc_autoneg(hw);
+	hw->mac.ops.fc_autoneg(hw);
 
 	/* Disable any previous flow control settings */
 	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
@@ -2231,8 +2279,8 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
  *  Find the intersection between advertised settings and link partner's
  *  advertised settings
  **/
-static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
-			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+		       u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
 {
 	if ((!(adv_reg)) ||  (!(lp_reg)))
 		return IXGBE_ERR_FC_NOT_NEGOTIATED;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index 6d4c260d0cbd..5b3e3c65927e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -49,6 +49,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
 
 s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw);
 
 s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
 s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index f49f80380aa5..fd192bf29b26 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2225,11 +2225,11 @@ static int ixgbe_set_phys_id(struct net_device *netdev,
 		return 2;
 
 	case ETHTOOL_ID_ON:
-		hw->mac.ops.led_on(hw, hw->bus.func);
+		hw->mac.ops.led_on(hw, hw->mac.led_link_act);
 		break;
 
 	case ETHTOOL_ID_OFF:
-		hw->mac.ops.led_off(hw, hw->bus.func);
+		hw->mac.ops.led_off(hw, hw->mac.led_link_act);
 		break;
 
 	case ETHTOOL_ID_INACTIVE:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 5e1f57c7ee1b..2436984481cc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -54,6 +54,7 @@
 #include <net/pkt_cls.h>
 #include <net/tc_act/tc_gact.h>
 #include <net/tc_act/tc_mirred.h>
+#include <net/vxlan.h>
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
@@ -3070,6 +3071,9 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
 		return;
 	}
 
+	if (!adapter->msix_entries)
+		return;
+
 	for (vector = 0; vector < adapter->num_q_vectors; vector++) {
 		struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
 		struct msix_entry *entry = &adapter->msix_entries[vector];
@@ -5621,7 +5625,8 @@ static void ixgbe_init_dcb(struct ixgbe_adapter *adapter)
  * Fields are initialized based on PCI device information and
  * OS network device settings (MTU size).
  **/
-static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
+static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
+			 const struct ixgbe_info *ii)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
@@ -5637,6 +5642,9 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 	hw->subsystem_device_id = pdev->subsystem_device;
 
+	/* get_invariants needs the device IDs */
+	ii->get_invariants(hw);
+
 	/* Set common capability flags and settings */
 	rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus());
 	adapter->ring_feature[RING_F_RSS].limit = rss;
@@ -7653,11 +7661,17 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 	/* snag network header to get L4 type and address */
 	skb = first->skb;
 	hdr.network = skb_network_header(skb);
+	if (unlikely(hdr.network <= skb->data))
+		return;
 	if (skb->encapsulation &&
 	    first->protocol == htons(ETH_P_IP) &&
-	    hdr.ipv4->protocol != IPPROTO_UDP) {
+	    hdr.ipv4->protocol == IPPROTO_UDP) {
 		struct ixgbe_adapter *adapter = q_vector->adapter;
 
+		if (unlikely(skb_tail_pointer(skb) < hdr.network +
+			     VXLAN_HEADROOM))
+			return;
+
 		/* verify the port is recognized as VXLAN */
 		if (adapter->vxlan_port &&
 		    udp_hdr(skb)->dest == adapter->vxlan_port)
@@ -7668,6 +7682,12 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 			hdr.network = skb_inner_network_header(skb);
 	}
 
+	/* Make sure we have at least [minimum IPv4 header + TCP]
+	 * or [IPv6 header] bytes
+	 */
+	if (unlikely(skb_tail_pointer(skb) < hdr.network + 40))
+		return;
+
 	/* Currently only IPv4/IPv6 with TCP is supported */
 	switch (hdr.ipv4->version) {
 	case IPVERSION:
@@ -7687,6 +7707,10 @@ static void ixgbe_atr(struct ixgbe_ring *ring,
 	if (l4_proto != IPPROTO_TCP)
 		return;
 
+	if (unlikely(skb_tail_pointer(skb) < hdr.network +
+		     hlen + sizeof(struct tcphdr)))
+		return;
+
 	th = (struct tcphdr *)(hdr.network + hlen);
 
 	/* skip this packet since the socket is closing */
@@ -9504,6 +9528,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw->mac.ops   = *ii->mac_ops;
 	hw->mac.type  = ii->mac;
 	hw->mvals     = ii->mvals;
+	if (ii->link_ops)
+		hw->link.ops  = *ii->link_ops;
 
 	/* EEPROM */
 	hw->eeprom.ops = *ii->eeprom_ops;
@@ -9527,10 +9553,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hw->phy.mdio.mdio_read = ixgbe_mdio_read;
 	hw->phy.mdio.mdio_write = ixgbe_mdio_write;
 
-	ii->get_invariants(hw);
-
 	/* setup the private structure */
-	err = ixgbe_sw_init(adapter);
+	err = ixgbe_sw_init(adapter, ii);
 	if (err)
 		goto err_sw_init;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 021ab9b89c71..3b8362085f57 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -109,8 +109,8 @@ static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
  *
  *  Returns an error code on error.
  */
-static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
-					       u16 reg, u16 *val, bool lock)
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+					u16 reg, u16 *val, bool lock)
 {
 	u32 swfw_mask = hw->phy.phy_semaphore_mask;
 	int max_retry = 10;
@@ -178,36 +178,6 @@ fail:
 }
 
 /**
- *  ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to read from
- *  @reg: I2C device register to read from
- *  @val: pointer to location to receive read value
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				    u16 reg, u16 *val)
-{
-	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
-
-/**
- *  ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to read from
- *  @reg: I2C device register to read from
- *  @val: pointer to location to receive read value
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					     u16 reg, u16 *val)
-{
-	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
-}
-
-/**
  *  ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
  *  @hw: pointer to the hardware structure
  *  @addr: I2C bus address to write to
@@ -217,8 +187,8 @@ s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
  *
  *  Returns an error code on error.
  */
-static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
-						u16 reg, u16 val, bool lock)
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+					 u16 reg, u16 val, bool lock)
 {
 	u32 swfw_mask = hw->phy.phy_semaphore_mask;
 	int max_retry = 1;
@@ -273,33 +243,39 @@ fail:
 }
 
 /**
- *  ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to write to
- *  @reg: I2C device register to write to
- *  @val: value to write
+ *  ixgbe_probe_phy - Probe a single address for a PHY
+ *  @hw: pointer to hardware structure
+ *  @phy_addr: PHY address to probe
  *
- *  Returns an error code on error.
- */
-s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
-				     u8 addr, u16 reg, u16 val)
+ *  Returns true if PHY found
+ **/
+static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr)
 {
-	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
+	u16 ext_ability = 0;
 
-/**
- *  ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to write to
- *  @reg: I2C device register to write to
- *  @val: value to write
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
-					      u8 addr, u16 reg, u16 val)
-{
-	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
+	hw->phy.mdio.prtad = phy_addr;
+	if (mdio45_probe(&hw->phy.mdio, phy_addr) != 0)
+		return false;
+
+	if (ixgbe_get_phy_id(hw))
+		return false;
+
+	hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		hw->phy.ops.read_reg(hw,
+				     MDIO_PMA_EXTABLE,
+				     MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability &
+		    (MDIO_PMA_EXTABLE_10GBT |
+		     MDIO_PMA_EXTABLE_1000BT))
+			hw->phy.type = ixgbe_phy_cu_unknown;
+		else
+			hw->phy.type = ixgbe_phy_generic;
+	}
+
+	return true;
 }
 
 /**
@@ -311,7 +287,7 @@ s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
 s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 {
 	u32 phy_addr;
-	u16 ext_ability = 0;
+	u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 
 	if (!hw->phy.phy_semaphore_mask) {
 		if (hw->bus.lan_id)
@@ -320,37 +296,34 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
 	}
 
-	if (hw->phy.type == ixgbe_phy_unknown) {
-		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
-			hw->phy.mdio.prtad = phy_addr;
-			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
-				ixgbe_get_phy_id(hw);
-				hw->phy.type =
-					ixgbe_get_phy_type_from_id(hw->phy.id);
-
-				if (hw->phy.type == ixgbe_phy_unknown) {
-					hw->phy.ops.read_reg(hw,
-							     MDIO_PMA_EXTABLE,
-							     MDIO_MMD_PMAPMD,
-							     &ext_ability);
-					if (ext_ability &
-					    (MDIO_PMA_EXTABLE_10GBT |
-					     MDIO_PMA_EXTABLE_1000BT))
-						hw->phy.type =
-							 ixgbe_phy_cu_unknown;
-					else
-						hw->phy.type =
-							 ixgbe_phy_generic;
-				}
+	if (hw->phy.type != ixgbe_phy_unknown)
+		return 0;
 
-				return 0;
-			}
+	if (hw->phy.nw_mng_if_sel) {
+		phy_addr = (hw->phy.nw_mng_if_sel &
+			    IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >>
+			   IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT;
+		if (ixgbe_probe_phy(hw, phy_addr))
+			return 0;
+		else
+			return IXGBE_ERR_PHY_ADDR_INVALID;
+	}
+
+	for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+		if (ixgbe_probe_phy(hw, phy_addr)) {
+			status = 0;
+			break;
 		}
-		/* indicate no PHY found */
-		hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
-		return IXGBE_ERR_PHY_ADDR_INVALID;
 	}
-	return 0;
+
+	/* Certain media types do not have a phy so an address will not
+	 * be found and the code will take this path.  Caller has to
+	 * decide if it is an error or not.
+	 */
+	if (status)
+		hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
+
+	return status;
 }
 
 /**
@@ -416,7 +389,8 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 	case TN1010_PHY_ID:
 		phy_type = ixgbe_phy_tn;
 		break;
-	case X550_PHY_ID:
+	case X550_PHY_ID2:
+	case X550_PHY_ID3:
 	case X540_PHY_ID:
 		phy_type = ixgbe_phy_aq;
 		break;
@@ -427,6 +401,7 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 		phy_type = ixgbe_phy_nl;
 		break;
 	case X557_PHY_ID:
+	case X557_PHY_ID2:
 		phy_type = ixgbe_phy_x550em_ext_t;
 		break;
 	default:
@@ -477,8 +452,7 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
 	 */
 	for (i = 0; i < 30; i++) {
 		msleep(100);
-		hw->phy.ops.read_reg(hw, MDIO_CTRL1,
-				     MDIO_MMD_PHYXS, &ctrl);
+		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &ctrl);
 		if (!(ctrl & MDIO_CTRL1_RESET)) {
 			udelay(2);
 			break;
@@ -705,53 +679,52 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
 
 	ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
 
-	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
-		/* Set or unset auto-negotiation 10G advertisement */
-		hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
-				     MDIO_MMD_AN,
-				     &autoneg_reg);
+	/* Set or unset auto-negotiation 10G advertisement */
+	hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, MDIO_MMD_AN, &autoneg_reg);
 
-		autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
-		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
-			autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
-
-		hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
-				      MDIO_MMD_AN,
-				      autoneg_reg);
-	}
+	autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+	if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) &&
+	    (speed & IXGBE_LINK_SPEED_10GB_FULL))
+		autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
 
-	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
-		/* Set or unset auto-negotiation 1G advertisement */
-		hw->phy.ops.read_reg(hw,
-				     IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
-				     MDIO_MMD_AN,
-				     &autoneg_reg);
+	hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL, MDIO_MMD_AN, autoneg_reg);
 
-		autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
-		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
-			autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+	hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+			     MDIO_MMD_AN, &autoneg_reg);
 
-		hw->phy.ops.write_reg(hw,
-				      IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
-				      MDIO_MMD_AN,
-				      autoneg_reg);
+	if (hw->mac.type == ixgbe_mac_X550) {
+		/* Set or unset auto-negotiation 5G advertisement */
+		autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+		if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_5GB_FULL) &&
+		    (speed & IXGBE_LINK_SPEED_5GB_FULL))
+			autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+		/* Set or unset auto-negotiation 2.5G advertisement */
+		autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+		if ((hw->phy.autoneg_advertised &
+		     IXGBE_LINK_SPEED_2_5GB_FULL) &&
+		    (speed & IXGBE_LINK_SPEED_2_5GB_FULL))
+			autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
 	}
 
-	if (speed & IXGBE_LINK_SPEED_100_FULL) {
-		/* Set or unset auto-negotiation 100M advertisement */
-		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
-				     MDIO_MMD_AN,
-				     &autoneg_reg);
+	/* Set or unset auto-negotiation 1G advertisement */
+	autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+	if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) &&
+	    (speed & IXGBE_LINK_SPEED_1GB_FULL))
+		autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
 
-		autoneg_reg &= ~(ADVERTISE_100FULL |
-				 ADVERTISE_100HALF);
-		if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
-			autoneg_reg |= ADVERTISE_100FULL;
+	hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+			      MDIO_MMD_AN, autoneg_reg);
 
-		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
-				      MDIO_MMD_AN,
-				      autoneg_reg);
-	}
+	/* Set or unset auto-negotiation 100M advertisement */
+	hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
+
+	autoneg_reg &= ~(ADVERTISE_100FULL | ADVERTISE_100HALF);
+	if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) &&
+	    (speed & IXGBE_LINK_SPEED_100_FULL))
+		autoneg_reg |= ADVERTISE_100FULL;
+
+	hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
 
 	/* Blocked by MNG FW so don't reset PHY */
 	if (ixgbe_check_reset_blocked(hw))
@@ -830,6 +803,7 @@ static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
 		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
 		break;
 	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_x550em_a:
 		hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
 		break;
 	default:
@@ -2396,9 +2370,7 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
 	if (!on && ixgbe_mng_present(hw))
 		return 0;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
-				      &reg);
+	status = hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, &reg);
 	if (status)
 		return status;
 
@@ -2410,8 +2382,6 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
 		reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
 	}
 
-	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
-				       reg);
+	status = hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_VEND1, reg);
 	return status;
 }
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index cc735ec3e045..ecf05f838fc5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -195,12 +195,8 @@ s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
 				   u8 *sff8472_data);
 s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
 				   u8 eeprom_data);
-s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				    u16 reg, u16 *val);
-s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					     u16 reg, u16 *val);
-s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				     u16 reg, u16 val);
-s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					      u16 reg, u16 val);
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					u16 *val, bool lock);
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					 u16 val, bool lock);
 #endif /* _IXGBE_PHY_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 31d82e3abac8..cf21273db201 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -874,19 +874,13 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB	0x4 /* 1Gb/s */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB	0x6 /* 10Gb/s */
 
-#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG	0x20	/* 10G Control Reg */
 #define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400	/* 1G Provisioning 1 */
 #define IXGBE_MII_AUTONEG_XNP_TX_REG		0x17	/* 1G XNP Transmit */
-#define IXGBE_MII_AUTONEG_ADVERTISE_REG		0x10	/* 100M Advertisement */
-#define IXGBE_MII_10GBASE_T_ADVERTISE		0x1000	/* full duplex, bit:12*/
 #define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX	0x4000	/* full duplex, bit:14*/
 #define IXGBE_MII_1GBASE_T_ADVERTISE		0x8000	/* full duplex, bit:15*/
 #define IXGBE_MII_2_5GBASE_T_ADVERTISE		0x0400
 #define IXGBE_MII_5GBASE_T_ADVERTISE		0x0800
-#define IXGBE_MII_100BASE_T_ADVERTISE		0x0100	/* full duplex, bit:8 */
-#define IXGBE_MII_100BASE_T_ADVERTISE_HALF	0x0080	/* half duplex, bit:7 */
 #define IXGBE_MII_RESTART			0x200
-#define IXGBE_MII_AUTONEG_COMPLETE		0x20
 #define IXGBE_MII_AUTONEG_LINK_UP		0x04
 #define IXGBE_MII_AUTONEG_REG			0x0
 
@@ -1320,30 +1314,20 @@ struct ixgbe_thermal_sensor_data {
 /* MDIO definitions */
 
 #define IXGBE_MDIO_ZERO_DEV_TYPE		0x0
-#define IXGBE_MDIO_PMA_PMD_DEV_TYPE		0x1
 #define IXGBE_MDIO_PCS_DEV_TYPE		0x3
-#define IXGBE_MDIO_PHY_XS_DEV_TYPE		0x4
-#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE		0x7
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE	0x1E   /* Device 30 */
 #define IXGBE_TWINAX_DEV			1
 
 #define IXGBE_MDIO_COMMAND_TIMEOUT     100 /* PHY Timeout for 1 GB mode */
 
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL      0x0    /* VS1 Control Reg */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS       0x1    /* VS1 Status Reg */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS  0x0008 /* 1 = Link Up */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
 
-#define IXGBE_MDIO_AUTO_NEG_CONTROL	0x0 /* AUTO_NEG Control Reg */
-#define IXGBE_MDIO_AUTO_NEG_STATUS	0x1 /* AUTO_NEG Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_STAT	0xC800 /* AUTO_NEG Vendor Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM  0xCC00 /* AUTO_NEG Vendor TX Reg */
 #define IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2 0xCC01 /* AUTO_NEG Vendor Tx Reg */
 #define IXGBE_MDIO_AUTO_NEG_VEN_LSC	0x1 /* AUTO_NEG Vendor Tx LSC */
-#define IXGBE_MDIO_AUTO_NEG_ADVT	0x10 /* AUTO_NEG Advt Reg */
-#define IXGBE_MDIO_AUTO_NEG_LP		0x13 /* AUTO_NEG LP Status Reg */
 #define IXGBE_MDIO_AUTO_NEG_EEE_ADVT	0x3C /* AUTO_NEG EEE Advt Reg */
 
 #define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE	 0x0800 /* Set low power mode */
@@ -1393,8 +1377,10 @@ struct ixgbe_thermal_sensor_data {
 #define TN1010_PHY_ID    0x00A19410
 #define TNX_FW_REV       0xB
 #define X540_PHY_ID      0x01540200
-#define X550_PHY_ID      0x01540220
+#define X550_PHY_ID2	0x01540223
+#define X550_PHY_ID3	0x01540221
 #define X557_PHY_ID      0x01540240
+#define X557_PHY_ID2	0x01540250
 #define QT2022_PHY_ID    0x0043A400
 #define ATH_PHY_ID       0x03429050
 #define AQ_FW_REV        0x20
@@ -3352,6 +3338,7 @@ struct ixgbe_mac_operations {
 	s32 (*led_off)(struct ixgbe_hw *, u32);
 	s32 (*blink_led_start)(struct ixgbe_hw *, u32);
 	s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+	s32 (*init_led_link_act)(struct ixgbe_hw *);
 
 	/* RAR, Multicast, VLAN */
 	s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
@@ -3372,6 +3359,7 @@ struct ixgbe_mac_operations {
 	/* Flow Control */
 	s32 (*fc_enable)(struct ixgbe_hw *);
 	s32 (*setup_fc)(struct ixgbe_hw *);
+	void (*fc_autoneg)(struct ixgbe_hw *);
 
 	/* Manageability interface */
 	s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
@@ -3410,16 +3398,28 @@ struct ixgbe_phy_operations {
 	s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
 	s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
 	s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
-	s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
-	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
 	s32 (*check_overtemp)(struct ixgbe_hw *);
 	s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
 	s32 (*enter_lplu)(struct ixgbe_hw *);
 	s32 (*handle_lasi)(struct ixgbe_hw *hw);
-	s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
-					  u16 *value);
-	s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
-					   u16 value);
+	s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				      u8 *value);
+	s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				       u8 value);
+};
+
+struct ixgbe_link_operations {
+	s32 (*read_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+	s32 (*read_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				  u16 *val);
+	s32 (*write_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
+	s32 (*write_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				   u16 val);
+};
+
+struct ixgbe_link_info {
+	struct ixgbe_link_operations ops;
+	u8 addr;
 };
 
 struct ixgbe_eeprom_info {
@@ -3462,6 +3462,7 @@ struct ixgbe_mac_info {
 	u8				san_mac_rar_index;
 	struct ixgbe_thermal_sensor_data  thermal_sensor_data;
 	bool				set_lben;
+	u8				led_link_act;
 };
 
 struct ixgbe_phy_info {
@@ -3523,6 +3524,7 @@ struct ixgbe_hw {
 	struct ixgbe_addr_filter_info	addr_ctrl;
 	struct ixgbe_fc_info		fc;
 	struct ixgbe_phy_info		phy;
+	struct ixgbe_link_info		link;
 	struct ixgbe_eeprom_info	eeprom;
 	struct ixgbe_bus_info		bus;
 	struct ixgbe_mbx_info		mbx;
@@ -3546,6 +3548,7 @@ struct ixgbe_info {
 	const struct ixgbe_eeprom_operations	*eeprom_ops;
 	const struct ixgbe_phy_operations	*phy_ops;
 	const struct ixgbe_mbx_operations	*mbx_ops;
+	const struct ixgbe_link_operations	*link_ops;
 	const u32			*mvals;
 };
 
@@ -3593,17 +3596,35 @@ struct ixgbe_info {
 #define IXGBE_FUSES0_REV_MASK		(3u << 6)
 
 #define IXGBE_KRM_PORT_CAR_GEN_CTRL(P)	((P) ? 0x8010 : 0x4010)
+#define IXGBE_KRM_LINK_S1(P)		((P) ? 0x8200 : 0x4200)
 #define IXGBE_KRM_LINK_CTRL_1(P)	((P) ? 0x820C : 0x420C)
 #define IXGBE_KRM_AN_CNTL_1(P)		((P) ? 0x822C : 0x422C)
 #define IXGBE_KRM_AN_CNTL_8(P)		((P) ? 0x8248 : 0x4248)
 #define IXGBE_KRM_SGMII_CTRL(P)		((P) ? 0x82A0 : 0x42A0)
+#define IXGBE_KRM_LP_BASE_PAGE_HIGH(P)	((P) ? 0x836C : 0x436C)
 #define IXGBE_KRM_DSP_TXFFE_STATE_4(P)	((P) ? 0x8634 : 0x4634)
 #define IXGBE_KRM_DSP_TXFFE_STATE_5(P)	((P) ? 0x8638 : 0x4638)
 #define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P)	((P) ? 0x8B00 : 0x4B00)
 #define IXGBE_KRM_PMD_DFX_BURNIN(P)	((P) ? 0x8E00 : 0x4E00)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20(P)	((P) ? 0x9054 : 0x5054)
 #define IXGBE_KRM_TX_COEFF_CTRL_1(P)	((P) ? 0x9520 : 0x5520)
 #define IXGBE_KRM_RX_ANA_CTL(P)		((P) ? 0x9A00 : 0x5A00)
 
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA		~(0x3 << 20)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR		BIT(20)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_LR		(0x2 << 20)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN		BIT(25)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN		BIT(26)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN		BIT(27)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10M		~(0x7 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_100M		BIT(28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G		(0x2 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G		(0x3 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN		(0x4 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_2_5G		(0x7 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK		(0x7 << 28)
+#define IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART	BIT(31)
+
 #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B		BIT(9)
 #define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS		BIT(11)
 
@@ -3618,6 +3639,7 @@ struct ixgbe_info {
 #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR		BIT(18)
 #define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX		BIT(24)
 #define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR		BIT(26)
+#define IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE		BIT(28)
 #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE		BIT(29)
 #define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART		BIT(31)
 
@@ -3627,6 +3649,8 @@ struct ixgbe_info {
 #define IXGBE_KRM_AN_CNTL_8_LINEAR			BIT(0)
 #define IXGBE_KRM_AN_CNTL_8_LIMITING			BIT(1)
 
+#define IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE		BIT(10)
+#define IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE		BIT(11)
 #define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D	BIT(12)
 #define IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D		BIT(19)
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index f2b1d48a16c3..e2ff823ee202 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -851,6 +851,7 @@ static const struct ixgbe_mac_operations mac_ops_X540 = {
 	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.blink_led_start        = &ixgbe_blink_led_start_X540,
 	.blink_led_stop         = &ixgbe_blink_led_stop_X540,
 	.set_rar                = &ixgbe_set_rar_generic,
@@ -866,6 +867,7 @@ static const struct ixgbe_mac_operations mac_ops_X540 = {
 	.set_vfta               = &ixgbe_set_vfta_generic,
 	.fc_enable              = &ixgbe_fc_enable_generic,
 	.setup_fc		= ixgbe_setup_fc_generic,
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
 	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
 	.setup_sfp              = NULL,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 7e6b9267ca9d..11fb433eb924 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -28,11 +28,31 @@
 
 static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed);
 static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *);
+static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *);
+static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *);
+static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *);
 
 static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
 	struct ixgbe_phy_info *phy = &hw->phy;
+	struct ixgbe_link_info *link = &hw->link;
+
+	/* Start with X540 invariants, since so simular */
+	ixgbe_get_invariants_X540(hw);
+
+	if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper)
+		phy->ops.set_phy_power = NULL;
+
+	link->addr = IXGBE_CS4227;
+
+	return 0;
+}
+
+static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
 
 	/* Start with X540 invariants, since so simular */
 	ixgbe_get_invariants_X540(hw);
@@ -69,8 +89,7 @@ static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
  */
 static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
 {
-	return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
-						      value);
+	return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value);
 }
 
 /**
@@ -83,8 +102,7 @@ static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value)
  */
 static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value)
 {
-	return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg,
-						       value);
+	return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value);
 }
 
 /**
@@ -322,6 +340,68 @@ static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
 	return IXGBE_NOT_IMPLEMENTED;
 }
 
+/**
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+					   u16 reg, u16 *val)
+{
+	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
+					 u16 reg, u16 *val)
+{
+	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+					    u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
+					  u8 addr, u16 reg, u16 val)
+{
+	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params
  *  @hw: pointer to hardware structure
  *
@@ -1128,47 +1208,17 @@ out:
 	return ret;
 }
 
-/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+/**
+ *  ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration
  *  @hw: pointer to hardware structure
- *  @speed: the link speed to force
  *
- *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
- *  internal and external PHY at a specific speed, without autonegotiation.
+ *  iXfI configuration needed for ixgbe_mac_X550EM_x devices.
  **/
-static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
 {
 	s32 status;
 	u32 reg_val;
 
-	/* Disable AN and force speed to 10G Serial. */
-	status = ixgbe_read_iosf_sb_reg_x550(hw,
-					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
-	if (status)
-		return status;
-
-	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
-	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
-
-	/* Select forced link speed for internal PHY. */
-	switch (*speed) {
-	case IXGBE_LINK_SPEED_10GB_FULL:
-		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
-		break;
-	case IXGBE_LINK_SPEED_1GB_FULL:
-		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
-		break;
-	default:
-		/* Other link speeds are not supported by internal KR PHY. */
-		return IXGBE_ERR_LINK_SETUP;
-	}
-
-	status = ixgbe_write_iosf_sb_reg_x550(hw,
-				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
-	if (status)
-		return status;
-
 	/* Disable training protocol FSM. */
 	status = ixgbe_read_iosf_sb_reg_x550(hw,
 				IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
@@ -1228,20 +1278,106 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
 	status = ixgbe_write_iosf_sb_reg_x550(hw,
 				IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
 				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
-	if (status)
+	return status;
+}
+
+/**
+ *  ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the
+ *  internal PHY
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 link_ctrl;
+
+	/* Restart auto-negotiation. */
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl);
+
+	if (status) {
+		hw_dbg(hw, "Auto-negotiation did not complete\n");
 		return status;
+	}
 
-	/* Toggle port SW reset by AN reset. */
-	status = ixgbe_read_iosf_sb_reg_x550(hw,
+	link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = hw->mac.ops.write_iosf_sb_reg(hw,
 				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+				IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl);
+
+	if (hw->mac.type == ixgbe_mac_x550em_a) {
+		u32 flx_mask_st20;
+
+		/* Indicate to FW that AN restart has been asserted */
+		status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20);
+
+		if (status) {
+			hw_dbg(hw, "Auto-negotiation did not complete\n");
+			return status;
+		}
+
+		flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART;
+		status = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20);
+	}
+
+	return status;
+}
+
+/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
+ *  @hw: pointer to hardware structure
+ *  @speed: the link speed to force
+ *
+ *  Configures the integrated KR PHY to use iXFI mode. Used to connect an
+ *  internal and external PHY at a specific speed, without autonegotiation.
+ **/
+static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	s32 status;
+	u32 reg_val;
+
+	/* Disable AN and force speed to 10G Serial. */
+	status = ixgbe_read_iosf_sb_reg_x550(hw,
+					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
 	if (status)
 		return status;
 
-	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
+	reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal KR PHY. */
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
 	status = ixgbe_write_iosf_sb_reg_x550(hw,
 				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
 				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	if (status)
+		return status;
+
+	/* Additional configuration needed for x550em_x */
+	if (hw->mac.type == ixgbe_mac_X550EM_x) {
+		status = ixgbe_setup_ixfi_x550em_x(hw);
+		if (status)
+			return status;
+	}
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
 
 	return status;
 }
@@ -1292,7 +1428,7 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 				__always_unused bool autoneg_wait_to_complete)
 {
 	s32 status;
-	u16 slice, value;
+	u16 reg_slice, reg_val;
 	bool setup_linear = false;
 
 	/* Check if SFP module is supported and linear */
@@ -1308,71 +1444,68 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 	if (status)
 		return status;
 
-	if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
-		/* Configure CS4227 LINE side to 10G SR. */
-		slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
-		value = IXGBE_CS4227_SPEED_10G;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
+	/* Configure internal PHY for KR/KX. */
+	ixgbe_setup_kr_speed_x550em(hw, speed);
 
-		slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
-		value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-
-		/* Configure CS4227 for HOST connection rate then type. */
-		slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
-		value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
-			IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
+	/* Configure CS4227 LINE side to proper mode. */
+	reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+	if (setup_linear)
+		reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+	else
+		reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
 
-		slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
-		if (setup_linear)
-			value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
-		else
-			value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
+	status = hw->link.ops.write_link(hw, hw->link.addr, reg_slice,
+					 reg_val);
 
-		/* Setup XFI internal link. */
-		status = ixgbe_setup_ixfi_x550em(hw, &speed);
-		if (status) {
-			hw_dbg(hw, "setup_ixfi failed with %d\n", status);
-			return status;
-		}
-	} else {
-		/* Configure internal PHY for KR/KX. */
-		status = ixgbe_setup_kr_speed_x550em(hw, speed);
-		if (status) {
-			hw_dbg(hw, "setup_kr_speed failed with %d\n", status);
-			return status;
-		}
+	return status;
+}
 
-		/* Configure CS4227 LINE side to proper mode. */
-		slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
-		if (setup_linear)
-			value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
-		else
-			value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
+/**
+ * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ *
+ * Configures the integrated PHY for native SFI mode. Used to connect the
+ * internal PHY directly to an SFP cage, without autonegotiation.
+ **/
+static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	s32 status;
+	u32 reg_val;
+
+	/* Disable all AN and force speed to 10G Serial. */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal PHY. */
+		return IXGBE_ERR_LINK_SETUP;
 	}
 
-	return 0;
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
 
-i2c_err:
-	hw_dbg(hw, "combined i2c access failed with %d\n", status);
 	return status;
 }
 
@@ -1388,45 +1521,39 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 {
 	bool setup_linear = false;
 	u32 reg_phy_int;
-	s32 rc;
+	s32 ret_val;
 
 	/* Check if SFP module is supported and linear */
-	rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
 
 	/* If no SFP module present, then return success. Return success since
 	 * SFP not present error is not excepted in the setup MAC link flow.
 	 */
-	if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
 		return 0;
 
-	if (!rc)
-		return rc;
+	if (!ret_val)
+		return ret_val;
 
-	/* Configure internal PHY for native SFI */
-	rc = hw->mac.ops.read_iosf_sb_reg(hw,
-					  IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
-					  IXGBE_SB_IOSF_TARGET_KR_PHY,
-					  &reg_phy_int);
-	if (rc)
-		return rc;
+	/* Configure internal PHY for native SFI based on module type */
+	ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_phy_int);
+	if (!ret_val)
+		return ret_val;
 
-	if (setup_linear) {
-		reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LIMITING;
-		reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LINEAR;
-	} else {
-		reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LIMITING;
-		reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LINEAR;
-	}
+	reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA;
+	if (!setup_linear)
+		reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR;
 
-	rc = hw->mac.ops.write_iosf_sb_reg(hw,
-					   IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
-					   IXGBE_SB_IOSF_TARGET_KR_PHY,
-					   reg_phy_int);
-	if (rc)
-		return rc;
+	ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int);
+	if (!ret_val)
+		return ret_val;
 
-	/* Setup XFI/SFI internal link */
-	return ixgbe_setup_ixfi_x550em(hw, &speed);
+	/* Setup SFI internal link. */
+	return ixgbe_setup_sfi_x550a(hw, &speed);
 }
 
 /**
@@ -1442,19 +1569,19 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 	u32 reg_slice, slice_offset;
 	bool setup_linear = false;
 	u16 reg_phy_ext;
-	s32 rc;
+	s32 ret_val;
 
 	/* Check if SFP module is supported and linear */
-	rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
 
 	/* If no SFP module present, then return success. Return success since
 	 * SFP not present error is not excepted in the setup MAC link flow.
 	 */
-	if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
 		return 0;
 
-	if (!rc)
-		return rc;
+	if (!ret_val)
+		return ret_val;
 
 	/* Configure internal PHY for KR/KX. */
 	ixgbe_setup_kr_speed_x550em(hw, speed);
@@ -1463,10 +1590,10 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 		return IXGBE_ERR_PHY_ADDR_INVALID;
 
 	/* Get external PHY device id */
-	rc = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
+	ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
 				  IXGBE_MDIO_ZERO_DEV_TYPE, &reg_phy_ext);
-	if (rc)
-		return rc;
+	if (ret_val)
+		return ret_val;
 
 	/* When configuring quad port CS4223, the MAC instance is part
 	 * of the slice offset.
@@ -1538,7 +1665,7 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
 				     bool link_up_wait_to_complete)
 {
 	u32 status;
-	u16 autoneg_status;
+	u16 i, autoneg_status;
 
 	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
 		return IXGBE_ERR_CONFIG;
@@ -1550,14 +1677,18 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
 	if (status || !(*link_up))
 		return status;
 
-	 /* MAC link is up, so check external PHY link.
-	  * Read this twice back to back to indicate current status.
-	  */
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
-				      &autoneg_status);
-	if (status)
-		return status;
+	/* MAC link is up, so check external PHY link.
+	 * Link status is latching low, and can only be used to detect link
+	 * drop, and not the current status of the link without performing
+	 * back-to-back reads.
+	 */
+	for (i = 0; i < 2; i++) {
+		status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
+					      &autoneg_status);
+
+		if (status)
+			return status;
+	}
 
 	/* If external PHY link is not up, then indicate link not up */
 	if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS))
@@ -1575,7 +1706,7 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 		  __always_unused bool autoneg_wait_to_complete)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	u32 lval, sval;
+	u32 lval, sval, flx_val;
 	s32 rc;
 
 	rc = mac->ops.read_iosf_sb_reg(hw,
@@ -1609,14 +1740,55 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 	if (rc)
 		return rc;
 
-	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+
 	rc = mac->ops.write_iosf_sb_reg(hw,
-					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
+	if (rc)
+		return rc;
 
+	rc = ixgbe_restart_an_internal_phy_x550em(hw);
 	return rc;
 }
 
+/** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	switch (mac->ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+		mac->ops.setup_fc = NULL;
+		mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
+		break;
+	case ixgbe_media_type_backplane:
+		mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a;
+		mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a;
+		break;
+	default:
+		break;
+	}
+}
+
 /** ixgbe_init_mac_link_ops_X550em - init mac link function pointers
  *  @hw: pointer to hardware structure
  **/
@@ -1664,6 +1836,10 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw)
 	default:
 		break;
 	}
+
+	/* Additional modification for X550em_a devices */
+	if (hw->mac.type == ixgbe_mac_x550em_a)
+		ixgbe_init_mac_link_ops_X550em_a(hw);
 }
 
 /** ixgbe_setup_sfp_modules_X550em - Setup SFP module
@@ -1740,7 +1916,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor alarm triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN))
@@ -1748,7 +1924,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN |
@@ -1757,7 +1933,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Global alarm triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 
 	if (status)
@@ -1772,7 +1948,7 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 	if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
 		/*  device fault alarm triggered */
 		status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG,
-					  IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					  MDIO_MMD_VEND1,
 					  &reg);
 		if (status)
 			return status;
@@ -1787,14 +1963,14 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
 
 	/* Vendor alarm 2 triggered */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 
 	if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT))
 		return status;
 
 	/* link connect/disconnect event occurred */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 
 	if (status)
 		return status;
@@ -1826,20 +2002,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 
 	/* Enable link status change alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &reg);
+				      MDIO_MMD_AN, &reg);
 	if (status)
 		return status;
 
 	reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
-				       IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg);
+				       MDIO_MMD_AN, reg);
 	if (status)
 		return status;
 
 	/* Enable high temperature failure and global fault alarms */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1848,14 +2024,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 		IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN);
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 	if (status)
 		return status;
 
 	/* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1864,14 +2040,14 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 		IXGBE_MDIO_GLOBAL_ALARM_1_INT);
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 	if (status)
 		return status;
 
 	/* Enable chip-wide vendor alarm */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
-				      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				      MDIO_MMD_VEND1,
 				      &reg);
 	if (status)
 		return status;
@@ -1879,7 +2055,7 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
 	reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN;
 
 	status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK,
-				       IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				       MDIO_MMD_VEND1,
 				       reg);
 
 	return status;
@@ -1945,13 +2121,31 @@ static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
 	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
 
-	/* Restart auto-negotiation. */
-	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
 	status = hw->mac.ops.write_iosf_sb_reg(hw,
 					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
 					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
 
-	return status;
+	if (hw->mac.type == ixgbe_mac_x550em_a) {
+		/* Set lane mode  to KR auto negotiation */
+		status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+
+		if (status)
+			return status;
+
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+
+		status = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	}
+
+	return ixgbe_restart_an_internal_phy_x550em(hw);
 }
 
 /** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
@@ -2020,14 +2214,12 @@ static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
 	*link_up = false;
 
 	/* read this twice back to back to indicate current status */
-	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 				   &autoneg_status);
 	if (ret)
 		return ret;
 
-	ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
-				   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
 				   &autoneg_status);
 	if (ret)
 		return ret;
@@ -2073,7 +2265,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
 		return 0;
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &speed);
 	if (status)
 		return status;
@@ -2134,10 +2326,10 @@ static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 
 	/* To turn on the LED, set mode to ON. */
 	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+			     MDIO_MMD_VEND1, &phy_data);
 	phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
 	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+			      MDIO_MMD_VEND1, phy_data);
 
 	return 0;
 }
@@ -2156,10 +2348,10 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 
 	/* To turn on the LED, set mode to ON. */
 	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+			     MDIO_MMD_VEND1, &phy_data);
 	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
 	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
-			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+			      MDIO_MMD_VEND1, phy_data);
 
 	return 0;
 }
@@ -2180,7 +2372,7 @@ static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw,
 	*lcd_speed = IXGBE_LINK_SPEED_UNKNOWN;
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &an_lp_status);
 	if (status)
 		return status;
@@ -2281,6 +2473,90 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
 	return rc;
 }
 
+/**
+ *  ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
+{
+	u32 link_s1, lp_an_page_low, an_cntl_1;
+	s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+	ixgbe_link_speed speed;
+	bool link_up;
+
+	/* AN should have completed when the cable was plugged in.
+	 * Look for reasons to bail out.  Bail out if:
+	 * - FC autoneg is disabled, or if
+	 * - link is not up.
+	 */
+	if (hw->fc.disable_fc_autoneg) {
+		hw_err(hw, "Flow control autoneg is disabled");
+		goto out;
+	}
+
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+	if (!link_up) {
+		hw_err(hw, "The link is down");
+		goto out;
+	}
+
+	/* Check at auto-negotiation has completed */
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+					IXGBE_KRM_LINK_S1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1);
+
+	if (status || (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) {
+		hw_dbg(hw, "Auto-Negotiation did not complete\n");
+		status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+		goto out;
+	}
+
+	/* Read the 10g AN autoc and LP ability registers and resolve
+	 * local flow control settings accordingly
+	 */
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1);
+
+	if (status) {
+		hw_dbg(hw, "Auto-Negotiation did not complete\n");
+		goto out;
+	}
+
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low);
+
+	if (status) {
+		hw_dbg(hw, "Auto-Negotiation did not complete\n");
+		goto out;
+	}
+
+	status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low,
+				    IXGBE_KRM_AN_CNTL_1_SYM_PAUSE,
+				    IXGBE_KRM_AN_CNTL_1_ASM_PAUSE,
+				    IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE,
+				    IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE);
+
+out:
+	if (!status) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+	}
+}
+
+/**
+ *  ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
+{
+	hw->fc.fc_was_autonegged = false;
+	hw->fc.current_mode = hw->fc.requested_mode;
+}
+
 /** ixgbe_enter_lplu_x550em - Transition to low power states
  *  @hw: pointer to hardware structure
  *
@@ -2327,7 +2603,7 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 		return ixgbe_set_copper_phy_power(hw, false);
 
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &speed);
 	if (status)
 		return status;
@@ -2349,20 +2625,20 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
 
 	/* Clear AN completed indication */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &autoneg_reg);
 	if (status)
 		return status;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+				      MDIO_MMD_AN,
 				      &an_10g_cntl_reg);
 	if (status)
 		return status;
 
 	status = hw->phy.ops.read_reg(hw,
 				      IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
-				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+				      MDIO_MMD_AN,
 				      &autoneg_reg);
 	if (status)
 		return status;
@@ -2520,7 +2796,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 
 	status = hw->phy.ops.read_reg(hw,
 				      IXGBE_MDIO_TX_VENDOR_ALARMS_3,
-				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				      MDIO_MMD_PMAPMD,
 				      &reg);
 	if (status)
 		return status;
@@ -2531,7 +2807,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 	if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
 		status = hw->phy.ops.read_reg(hw,
 					IXGBE_MDIO_GLOBAL_RES_PR_10,
-					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 					&reg);
 		if (status)
 			return status;
@@ -2540,7 +2816,7 @@ static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw)
 
 		status = hw->phy.ops.write_reg(hw,
 					IXGBE_MDIO_GLOBAL_RES_PR_10,
-					IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+					MDIO_MMD_VEND1,
 					reg);
 		if (status)
 			return status;
@@ -2729,6 +3005,90 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
 }
 
 /**
+ *  ixgbe_setup_fc_backplane_x550em_a - Set up flow control
+ *  @hw: pointer to hardware structure
+ *
+ *  Called at init time to set up flow control.
+ **/
+static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u32 an_cntl = 0;
+
+	/* Validate the requested mode */
+	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+		hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
+		return IXGBE_ERR_INVALID_LINK_SETTINGS;
+	}
+
+	if (hw->fc.requested_mode == ixgbe_fc_default)
+		hw->fc.requested_mode = ixgbe_fc_full;
+
+	/* Set up the 1G and 10G flow control advertisement registers so the
+	 * HW will be able to do FC autoneg once the cable is plugged in.  If
+	 * we link at 10G, the 1G advertisement is harmless and vice versa.
+	 */
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+					IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl);
+
+	if (status) {
+		hw_dbg(hw, "Auto-Negotiation did not complete\n");
+		return status;
+	}
+
+	/* The possible values of fc.requested_mode are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames,
+	 *    but not send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but
+	 *    we do not support receiving pause frames).
+	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_none:
+		/* Flow control completely disabled by software override. */
+		an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+			     IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+		break;
+	case ixgbe_fc_tx_pause:
+		/* Tx Flow control is enabled, and Rx Flow control is
+		 * disabled by software override.
+		 */
+		an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+		an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+		break;
+	case ixgbe_fc_rx_pause:
+		/* Rx Flow control is enabled and Tx Flow control is
+		 * disabled by software override. Since there really
+		 * isn't a way to advertise that we are capable of RX
+		 * Pause ONLY, we will advertise that we support both
+		 * symmetric and asymmetric Rx PAUSE, as such we fall
+		 * through to the fc_full statement.  Later, we will
+		 * disable the adapter's ability to send PAUSE frames.
+		 */
+	case ixgbe_fc_full:
+		/* Flow control (both Rx and Tx) is enabled by SW override. */
+		an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+			   IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+		break;
+	default:
+		hw_err(hw, "Flow control param set incorrectly\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	status = hw->mac.ops.write_iosf_sb_reg(hw,
+					IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+					IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl);
+
+	/* Restart auto-negotiation. */
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
+
+	return status;
+}
+
+/**
  * ixgbe_set_mux - Set mux for port 1 access with CS4227
  * @hw: pointer to hardware structure
  * @state: set mux if 1, clear if 0
@@ -2934,6 +3294,7 @@ static const struct ixgbe_mac_operations mac_ops_X550 = {
 	X550_COMMON_MAC
 	.led_on			= ixgbe_led_on_generic,
 	.led_off		= ixgbe_led_off_generic,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.reset_hw		= &ixgbe_reset_hw_X540,
 	.get_media_type		= &ixgbe_get_media_type_X540,
 	.get_san_mac_addr	= &ixgbe_get_san_mac_addr_generic,
@@ -2948,12 +3309,14 @@ static const struct ixgbe_mac_operations mac_ops_X550 = {
 	.prot_autoc_read	= prot_autoc_read_generic,
 	.prot_autoc_write	= prot_autoc_write_generic,
 	.setup_fc		= ixgbe_setup_fc_generic,
+	.fc_autoneg		= ixgbe_fc_autoneg,
 };
 
 static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
 	X550_COMMON_MAC
 	.led_on			= ixgbe_led_on_t_x550em,
 	.led_off		= ixgbe_led_off_t_x550em,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.reset_hw		= &ixgbe_reset_hw_X550em,
 	.get_media_type		= &ixgbe_get_media_type_X550em,
 	.get_san_mac_addr	= NULL,
@@ -2966,6 +3329,7 @@ static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
 	.release_swfw_sync	= &ixgbe_release_swfw_sync_X550em,
 	.init_swfw_sync		= &ixgbe_init_swfw_sync_X540,
 	.setup_fc		= NULL, /* defined later */
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.read_iosf_sb_reg	= ixgbe_read_iosf_sb_reg_x550,
 	.write_iosf_sb_reg	= ixgbe_write_iosf_sb_reg_x550,
 };
@@ -2974,6 +3338,7 @@ static struct ixgbe_mac_operations mac_ops_x550em_a = {
 	X550_COMMON_MAC
 	.led_on			= ixgbe_led_on_t_x550em,
 	.led_off		= ixgbe_led_off_t_x550em,
+	.init_led_link_act	= ixgbe_init_led_link_act_generic,
 	.reset_hw		= ixgbe_reset_hw_X550em,
 	.get_media_type		= ixgbe_get_media_type_X550em,
 	.get_san_mac_addr	= NULL,
@@ -2985,6 +3350,7 @@ static struct ixgbe_mac_operations mac_ops_x550em_a = {
 	.acquire_swfw_sync	= ixgbe_acquire_swfw_sync_x550em_a,
 	.release_swfw_sync	= ixgbe_release_swfw_sync_x550em_a,
 	.setup_fc		= ixgbe_setup_fc_x550em,
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.read_iosf_sb_reg	= ixgbe_read_iosf_sb_reg_x550a,
 	.write_iosf_sb_reg	= ixgbe_write_iosf_sb_reg_x550a,
 };
@@ -3036,11 +3402,6 @@ static const struct ixgbe_phy_operations phy_ops_X550EM_x = {
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_generic,
 	.write_reg		= &ixgbe_write_phy_reg_generic,
-	.read_i2c_combined	= &ixgbe_read_i2c_combined_generic,
-	.write_i2c_combined	= &ixgbe_write_i2c_combined_generic,
-	.read_i2c_combined_unlocked = &ixgbe_read_i2c_combined_generic_unlocked,
-	.write_i2c_combined_unlocked =
-				     &ixgbe_write_i2c_combined_generic_unlocked,
 };
 
 static const struct ixgbe_phy_operations phy_ops_x550em_a = {
@@ -3053,6 +3414,13 @@ static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	.write_reg_mdi		= &ixgbe_write_phy_reg_mdi,
 };
 
+static const struct ixgbe_link_operations link_ops_x550em_x = {
+	.read_link		= &ixgbe_read_i2c_combined_generic,
+	.read_link_unlocked	= &ixgbe_read_i2c_combined_generic_unlocked,
+	.write_link		= &ixgbe_write_i2c_combined_generic,
+	.write_link_unlocked	= &ixgbe_write_i2c_combined_generic_unlocked,
+};
+
 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
 	IXGBE_MVALS_INIT(X550)
 };
@@ -3083,11 +3451,12 @@ const struct ixgbe_info ixgbe_X550EM_x_info = {
 	.phy_ops		= &phy_ops_X550EM_x,
 	.mbx_ops		= &mbx_ops_generic,
 	.mvals			= ixgbe_mvals_X550EM_x,
+	.link_ops		= &link_ops_x550em_x,
 };
 
 const struct ixgbe_info ixgbe_x550em_a_info = {
 	.mac			= ixgbe_mac_x550em_a,
-	.get_invariants		= &ixgbe_get_invariants_X550_x,
+	.get_invariants		= &ixgbe_get_invariants_X550_a,
 	.mac_ops		= &mac_ops_x550em_a,
 	.eeprom_ops		= &eeprom_ops_X550EM_x,
 	.phy_ops		= &phy_ops_x550em_a,
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index d2775f032f74..d316f503a727 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1498,6 +1498,9 @@ static void ixgbevf_free_irq(struct ixgbevf_adapter *adapter)
 {
 	int i, q_vectors;
 
+	if (!adapter->msix_entries)
+		return;
+
 	q_vectors = adapter->num_msix_vectors;
 	i = q_vectors - 1;
 
@@ -2552,6 +2555,9 @@ static void ixgbevf_free_q_vectors(struct ixgbevf_adapter *adapter)
  **/
 static void ixgbevf_reset_interrupt_capability(struct ixgbevf_adapter *adapter)
 {
+	if (!adapter->msix_entries)
+		return;
+
 	pci_disable_msix(adapter->pdev);
 	kfree(adapter->msix_entries);
 	adapter->msix_entries = NULL;
@@ -3794,11 +3800,10 @@ static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state)
 		ixgbevf_free_irq(adapter);
 		ixgbevf_free_all_tx_resources(adapter);
 		ixgbevf_free_all_rx_resources(adapter);
+		ixgbevf_clear_interrupt_scheme(adapter);
 		rtnl_unlock();
 	}
 
-	ixgbevf_clear_interrupt_scheme(adapter);
-
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
 	if (retval)