drm/i915: Split out runtime configuration of device info to its own file

Let's reclaim a few hundred lines from i915_drv.c by splitting out the
runtime configuration of the "constant" dev_priv->info.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

4 files changed, 421 insertions, 391 deletions

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 618293c8c9d9..684fc1cd08fa 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -14,6 +14,7 @@ i915-y := i915_drv.o \
           i915_suspend.o \
 	  i915_sysfs.o \
 	  intel_csr.o \
+	  intel_device_info.o \
 	  intel_pm.o \
 	  intel_runtime_pm.o
 
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 695001ffd547..87295f6e5520 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -748,394 +748,6 @@ static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
 }
 #endif
 
-static void i915_dump_device_info(struct drm_i915_private *dev_priv)
-{
-	const struct intel_device_info *info = &dev_priv->info;
-
-#define PRINT_S(name) "%s"
-#define SEP_EMPTY
-#define PRINT_FLAG(name) info->name ? #name "," : ""
-#define SEP_COMMA ,
-	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
-			 info->gen,
-			 dev_priv->dev->pdev->device,
-			 dev_priv->dev->pdev->revision,
-			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
-#undef PRINT_S
-#undef SEP_EMPTY
-#undef PRINT_FLAG
-#undef SEP_COMMA
-}
-
-static void cherryview_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	u32 fuse, eu_dis;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse = I915_READ(CHV_FUSE_GT);
-
-	info->slice_total = 1;
-
-	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
-				 CHV_FGT_EU_DIS_SS0_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
-		info->subslice_per_slice++;
-		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
-				 CHV_FGT_EU_DIS_SS1_R1_MASK);
-		info->eu_total += 8 - hweight32(eu_dis);
-	}
-
-	info->subslice_total = info->subslice_per_slice;
-	/*
-	 * CHV expected to always have a uniform distribution of EU
-	 * across subslices.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				info->eu_total / info->subslice_total :
-				0;
-	/*
-	 * CHV supports subslice power gating on devices with more than
-	 * one subslice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice.
-	*/
-	info->has_slice_pg = 0;
-	info->has_subslice_pg = (info->subslice_total > 1);
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void gen9_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	int s_max = 3, ss_max = 4, eu_max = 8;
-	int s, ss;
-	u32 fuse2, s_enable, ss_disable, eu_disable;
-	u8 eu_mask = 0xff;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
-		   GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
-		     GEN9_F2_SS_DIS_SHIFT;
-
-	info->slice_total = hweight32(s_enable);
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	*/
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total *
-			       info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	*/
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
-		for (ss = 0; ss < ss_max; ss++) {
-			int eu_per_ss;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
-						      eu_mask);
-
-			/*
-			 * Record which subslice(s) has(have) 7 EUs. we
-			 * can tune the hash used to spread work among
-			 * subslices if they are unbalanced.
-			 */
-			if (eu_per_ss == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_per_ss;
-		}
-	}
-
-	/*
-	 * SKL is expected to always have a uniform distribution
-	 * of EU across subslices with the exception that any one
-	 * EU in any one subslice may be fused off for die
-	 * recovery. BXT is expected to be perfectly uniform in EU
-	 * distribution.
-	*/
-	info->eu_per_subslice = info->subslice_total ?
-				DIV_ROUND_UP(info->eu_total,
-					     info->subslice_total) : 0;
-	/*
-	 * SKL supports slice power gating on devices with more than
-	 * one slice, and supports EU power gating on devices with
-	 * more than one EU pair per subslice. BXT supports subslice
-	 * power gating on devices with more than one subslice, and
-	 * supports EU power gating on devices with more than one EU
-	 * pair per subslice.
-	*/
-	info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
-			       (info->slice_total > 1));
-	info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
-	info->has_eu_pg = (info->eu_per_subslice > 2);
-
-	if (IS_BROXTON(dev)) {
-#define IS_SS_DISABLED(_ss_disable, ss)    (_ss_disable & (0x1 << ss))
-		/*
-		 * There is a HW issue in 2x6 fused down parts that requires
-		 * Pooled EU to be enabled as a WA. The pool configuration
-		 * changes depending upon which subslice is fused down. This
-		 * doesn't affect if the device has all 3 subslices enabled.
-		 */
-		/* WaEnablePooledEuFor2x6:bxt */
-		info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
-				       (info->subslice_per_slice == 2 &&
-					INTEL_REVID(dev) < BXT_REVID_C0));
-
-		info->min_eu_in_pool = 0;
-		if (info->has_pooled_eu) {
-			if (IS_SS_DISABLED(ss_disable, 0) ||
-			    IS_SS_DISABLED(ss_disable, 2))
-				info->min_eu_in_pool = 3;
-			else if (IS_SS_DISABLED(ss_disable, 1))
-				info->min_eu_in_pool = 6;
-			else
-				info->min_eu_in_pool = 9;
-		}
-#undef IS_SS_DISABLED
-	}
-}
-
-static void broadwell_sseu_info_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	const int s_max = 3, ss_max = 3, eu_max = 8;
-	int s, ss;
-	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
-
-	fuse2 = I915_READ(GEN8_FUSE2);
-	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
-	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
-
-	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
-	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
-			 (32 - GEN8_EU_DIS0_S1_SHIFT));
-	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
-			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
-			 (32 - GEN8_EU_DIS1_S2_SHIFT));
-
-
-	info = (struct intel_device_info *)&dev_priv->info;
-	info->slice_total = hweight32(s_enable);
-
-	/*
-	 * The subslice disable field is global, i.e. it applies
-	 * to each of the enabled slices.
-	 */
-	info->subslice_per_slice = ss_max - hweight32(ss_disable);
-	info->subslice_total = info->slice_total * info->subslice_per_slice;
-
-	/*
-	 * Iterate through enabled slices and subslices to
-	 * count the total enabled EU.
-	 */
-	for (s = 0; s < s_max; s++) {
-		if (!(s_enable & (0x1 << s)))
-			/* skip disabled slice */
-			continue;
-
-		for (ss = 0; ss < ss_max; ss++) {
-			u32 n_disabled;
-
-			if (ss_disable & (0x1 << ss))
-				/* skip disabled subslice */
-				continue;
-
-			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
-
-			/*
-			 * Record which subslices have 7 EUs.
-			 */
-			if (eu_max - n_disabled == 7)
-				info->subslice_7eu[s] |= 1 << ss;
-
-			info->eu_total += eu_max - n_disabled;
-		}
-	}
-
-	/*
-	 * BDW is expected to always have a uniform distribution of EU across
-	 * subslices with the exception that any one EU in any one subslice may
-	 * be fused off for die recovery.
-	 */
-	info->eu_per_subslice = info->subslice_total ?
-		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
-
-	/*
-	 * BDW supports slice power gating on devices with more than
-	 * one slice.
-	 */
-	info->has_slice_pg = (info->slice_total > 1);
-	info->has_subslice_pg = 0;
-	info->has_eu_pg = 0;
-}
-
-/*
- * Determine various intel_device_info fields at runtime.
- *
- * Use it when either:
- *   - it's judged too laborious to fill n static structures with the limit
- *     when a simple if statement does the job,
- *   - run-time checks (eg read fuse/strap registers) are needed.
- *
- * This function needs to be called:
- *   - after the MMIO has been setup as we are reading registers,
- *   - after the PCH has been detected,
- *   - before the first usage of the fields it can tweak.
- */
-static void intel_device_info_runtime_init(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_device_info *info;
-	enum pipe pipe;
-
-	info = (struct intel_device_info *)&dev_priv->info;
-
-	/*
-	 * Skylake and Broxton currently don't expose the topmost plane as its
-	 * use is exclusive with the legacy cursor and we only want to expose
-	 * one of those, not both. Until we can safely expose the topmost plane
-	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
-	 * we don't expose the topmost plane at all to prevent ABI breakage
-	 * down the line.
-	 */
-	if (IS_BROXTON(dev)) {
-		info->num_sprites[PIPE_A] = 2;
-		info->num_sprites[PIPE_B] = 2;
-		info->num_sprites[PIPE_C] = 1;
-	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 2;
-	else
-		for_each_pipe(dev_priv, pipe)
-			info->num_sprites[pipe] = 1;
-
-	if (i915.disable_display) {
-		DRM_INFO("Display disabled (module parameter)\n");
-		info->num_pipes = 0;
-	} else if (info->num_pipes > 0 &&
-		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
-		   HAS_PCH_SPLIT(dev)) {
-		u32 fuse_strap = I915_READ(FUSE_STRAP);
-		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
-
-		/*
-		 * SFUSE_STRAP is supposed to have a bit signalling the display
-		 * is fused off. Unfortunately it seems that, at least in
-		 * certain cases, fused off display means that PCH display
-		 * reads don't land anywhere. In that case, we read 0s.
-		 *
-		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
-		 * should be set when taking over after the firmware.
-		 */
-		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
-		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
-		    (dev_priv->pch_type == PCH_CPT &&
-		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
-			DRM_INFO("Display fused off, disabling\n");
-			info->num_pipes = 0;
-		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
-			DRM_INFO("PipeC fused off\n");
-			info->num_pipes -= 1;
-		}
-	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
-		u32 dfsm = I915_READ(SKL_DFSM);
-		u8 disabled_mask = 0;
-		bool invalid;
-		int num_bits;
-
-		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
-			disabled_mask |= BIT(PIPE_A);
-		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
-			disabled_mask |= BIT(PIPE_B);
-		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
-			disabled_mask |= BIT(PIPE_C);
-
-		num_bits = hweight8(disabled_mask);
-
-		switch (disabled_mask) {
-		case BIT(PIPE_A):
-		case BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_B):
-		case BIT(PIPE_A) | BIT(PIPE_C):
-			invalid = true;
-			break;
-		default:
-			invalid = false;
-		}
-
-		if (num_bits > info->num_pipes || invalid)
-			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
-				  disabled_mask);
-		else
-			info->num_pipes -= num_bits;
-	}
-
-	/* Initialize slice/subslice/EU info */
-	if (IS_CHERRYVIEW(dev))
-		cherryview_sseu_info_init(dev);
-	else if (IS_BROADWELL(dev))
-		broadwell_sseu_info_init(dev);
-	else if (INTEL_INFO(dev)->gen >= 9)
-		gen9_sseu_info_init(dev);
-
-	info->has_snoop = !info->has_llc;
-
-	/* Snooping is broken on BXT A stepping. */
-	if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
-		info->has_snoop = false;
-
-	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
-	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
-	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
-	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
-	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
-	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
-			 info->has_slice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
-			 info->has_subslice_pg ? "y" : "n");
-	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
-			 info->has_eu_pg ? "y" : "n");
-
-	i915.enable_execlists =
-		intel_sanitize_enable_execlists(dev_priv,
-					       	i915.enable_execlists);
-
-	/*
-	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
-	 * user's requested state against the hardware/driver capabilities.  We
-	 * do this now so that we can print out any log messages once rather
-	 * than every time we check intel_enable_ppgtt().
-	 */
-	i915.enable_ppgtt =
-		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
-	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
-}
-
 static void intel_init_dpio(struct drm_i915_private *dev_priv)
 {
 	/*
@@ -1213,7 +825,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 		return -ENODEV;
 
 	/* Setup the write-once "constant" device info */
-	device_info = (struct intel_device_info *)&dev_priv->info;
+	device_info = mkwrite_device_info(dev_priv);
 	memcpy(device_info, match_info, sizeof(*device_info));
 	device_info->device_id = dev_priv->drm.pdev->device;
 
@@ -1254,7 +866,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,
 
 	intel_display_crc_init(&dev_priv->drm);
 
-	i915_dump_device_info(dev_priv);
+	intel_device_info_dump(dev_priv);
 
 	/* Not all pre-production machines fall into this category, only the
 	 * very first ones. Almost everything should work, except for maybe
@@ -1368,6 +980,23 @@ static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
 	pci_dev_put(dev_priv->bridge_dev);
 }
 
+static void intel_sanitize_options(struct drm_i915_private *dev_priv)
+{
+	i915.enable_execlists =
+		intel_sanitize_enable_execlists(dev_priv,
+						i915.enable_execlists);
+
+	/*
+	 * i915.enable_ppgtt is read-only, so do an early pass to validate the
+	 * user's requested state against the hardware/driver capabilities.  We
+	 * do this now so that we can print out any log messages once rather
+	 * than every time we check intel_enable_ppgtt().
+	 */
+	i915.enable_ppgtt =
+		intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
+	DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
+}
+
 /**
  * i915_driver_init_hw - setup state requiring device access
  * @dev_priv: device private
@@ -1385,7 +1014,9 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
 	if (i915_inject_load_failure())
 		return -ENODEV;
 
-	intel_device_info_runtime_init(dev);
+	intel_device_info_runtime_init(dev_priv);
+
+	intel_sanitize_options(dev_priv);
 
 	ret = i915_ggtt_init_hw(dev);
 	if (ret)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 594ddbba3a64..d33b370a057d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3750,6 +3750,16 @@ static inline void intel_register_dsm_handler(void) { return; }
 static inline void intel_unregister_dsm_handler(void) { return; }
 #endif /* CONFIG_ACPI */
 
+/* intel_device_info.c */
+static inline struct intel_device_info *
+mkwrite_device_info(struct drm_i915_private *dev_priv)
+{
+	return (struct intel_device_info *)&dev_priv->info;
+}
+
+void intel_device_info_runtime_init(struct drm_i915_private *dev_priv);
+void intel_device_info_dump(struct drm_i915_private *dev_priv);
+
 /* modesetting */
 extern void intel_modeset_init_hw(struct drm_device *dev);
 extern void intel_modeset_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
new file mode 100644
index 000000000000..cba137f9ad3e
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -0,0 +1,388 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "i915_drv.h"
+
+void intel_device_info_dump(struct drm_i915_private *dev_priv)
+{
+	const struct intel_device_info *info = &dev_priv->info;
+
+#define PRINT_S(name) "%s"
+#define SEP_EMPTY
+#define PRINT_FLAG(name) info->name ? #name "," : ""
+#define SEP_COMMA ,
+	DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
+			 info->gen,
+			 dev_priv->drm.pdev->device,
+			 dev_priv->drm.pdev->revision,
+			 DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
+#undef PRINT_S
+#undef SEP_EMPTY
+#undef PRINT_FLAG
+#undef SEP_COMMA
+}
+
+static void cherryview_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct intel_device_info *info = mkwrite_device_info(dev_priv);
+	u32 fuse, eu_dis;
+
+	fuse = I915_READ(CHV_FUSE_GT);
+
+	info->slice_total = 1;
+
+	if (!(fuse & CHV_FGT_DISABLE_SS0)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+				 CHV_FGT_EU_DIS_SS0_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	if (!(fuse & CHV_FGT_DISABLE_SS1)) {
+		info->subslice_per_slice++;
+		eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
+				 CHV_FGT_EU_DIS_SS1_R1_MASK);
+		info->eu_total += 8 - hweight32(eu_dis);
+	}
+
+	info->subslice_total = info->subslice_per_slice;
+	/*
+	 * CHV expected to always have a uniform distribution of EU
+	 * across subslices.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				info->eu_total / info->subslice_total :
+				0;
+	/*
+	 * CHV supports subslice power gating on devices with more than
+	 * one subslice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice.
+	*/
+	info->has_slice_pg = 0;
+	info->has_subslice_pg = (info->subslice_total > 1);
+	info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void gen9_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct intel_device_info *info = mkwrite_device_info(dev_priv);
+	int s_max = 3, ss_max = 4, eu_max = 8;
+	int s, ss;
+	u32 fuse2, s_enable, ss_disable, eu_disable;
+	u8 eu_mask = 0xff;
+
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >> GEN9_F2_SS_DIS_SHIFT;
+
+	info->slice_total = hweight32(s_enable);
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	*/
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	*/
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & BIT(s)))
+			/* skip disabled slice */
+			continue;
+
+		eu_disable = I915_READ(GEN9_EU_DISABLE(s));
+		for (ss = 0; ss < ss_max; ss++) {
+			int eu_per_ss;
+
+			if (ss_disable & BIT(ss))
+				/* skip disabled subslice */
+				continue;
+
+			eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
+						      eu_mask);
+
+			/*
+			 * Record which subslice(s) has(have) 7 EUs. we
+			 * can tune the hash used to spread work among
+			 * subslices if they are unbalanced.
+			 */
+			if (eu_per_ss == 7)
+				info->subslice_7eu[s] |= BIT(ss);
+
+			info->eu_total += eu_per_ss;
+		}
+	}
+
+	/*
+	 * SKL is expected to always have a uniform distribution
+	 * of EU across subslices with the exception that any one
+	 * EU in any one subslice may be fused off for die
+	 * recovery. BXT is expected to be perfectly uniform in EU
+	 * distribution.
+	*/
+	info->eu_per_subslice = info->subslice_total ?
+				DIV_ROUND_UP(info->eu_total,
+					     info->subslice_total) : 0;
+	/*
+	 * SKL supports slice power gating on devices with more than
+	 * one slice, and supports EU power gating on devices with
+	 * more than one EU pair per subslice. BXT supports subslice
+	 * power gating on devices with more than one subslice, and
+	 * supports EU power gating on devices with more than one EU
+	 * pair per subslice.
+	*/
+	info->has_slice_pg =
+		(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+		info->slice_total > 1;
+	info->has_subslice_pg =
+		IS_BROXTON(dev_priv) && info->subslice_total > 1;
+	info->has_eu_pg = info->eu_per_subslice > 2;
+
+	if (IS_BROXTON(dev_priv)) {
+#define IS_SS_DISABLED(_ss_disable, ss)    (_ss_disable & BIT(ss))
+		/*
+		 * There is a HW issue in 2x6 fused down parts that requires
+		 * Pooled EU to be enabled as a WA. The pool configuration
+		 * changes depending upon which subslice is fused down. This
+		 * doesn't affect if the device has all 3 subslices enabled.
+		 */
+		/* WaEnablePooledEuFor2x6:bxt */
+		info->has_pooled_eu = ((info->subslice_per_slice == 3) ||
+				       (info->subslice_per_slice == 2 &&
+					INTEL_REVID(dev_priv) < BXT_REVID_C0));
+
+		info->min_eu_in_pool = 0;
+		if (info->has_pooled_eu) {
+			if (IS_SS_DISABLED(ss_disable, 0) ||
+			    IS_SS_DISABLED(ss_disable, 2))
+				info->min_eu_in_pool = 3;
+			else if (IS_SS_DISABLED(ss_disable, 1))
+				info->min_eu_in_pool = 6;
+			else
+				info->min_eu_in_pool = 9;
+		}
+#undef IS_SS_DISABLED
+	}
+}
+
+static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct intel_device_info *info = mkwrite_device_info(dev_priv);
+	const int s_max = 3, ss_max = 3, eu_max = 8;
+	int s, ss;
+	u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+	fuse2 = I915_READ(GEN8_FUSE2);
+	s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+	ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
+
+	eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
+	eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
+			 (32 - GEN8_EU_DIS0_S1_SHIFT));
+	eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
+			((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
+			 (32 - GEN8_EU_DIS1_S2_SHIFT));
+
+	info->slice_total = hweight32(s_enable);
+
+	/*
+	 * The subslice disable field is global, i.e. it applies
+	 * to each of the enabled slices.
+	 */
+	info->subslice_per_slice = ss_max - hweight32(ss_disable);
+	info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+	/*
+	 * Iterate through enabled slices and subslices to
+	 * count the total enabled EU.
+	 */
+	for (s = 0; s < s_max; s++) {
+		if (!(s_enable & (0x1 << s)))
+			/* skip disabled slice */
+			continue;
+
+		for (ss = 0; ss < ss_max; ss++) {
+			u32 n_disabled;
+
+			if (ss_disable & (0x1 << ss))
+				/* skip disabled subslice */
+				continue;
+
+			n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
+
+			/*
+			 * Record which subslices have 7 EUs.
+			 */
+			if (eu_max - n_disabled == 7)
+				info->subslice_7eu[s] |= 1 << ss;
+
+			info->eu_total += eu_max - n_disabled;
+		}
+	}
+
+	/*
+	 * BDW is expected to always have a uniform distribution of EU across
+	 * subslices with the exception that any one EU in any one subslice may
+	 * be fused off for die recovery.
+	 */
+	info->eu_per_subslice = info->subslice_total ?
+		DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
+
+	/*
+	 * BDW supports slice power gating on devices with more than
+	 * one slice.
+	 */
+	info->has_slice_pg = (info->slice_total > 1);
+	info->has_subslice_pg = 0;
+	info->has_eu_pg = 0;
+}
+
+/*
+ * Determine various intel_device_info fields at runtime.
+ *
+ * Use it when either:
+ *   - it's judged too laborious to fill n static structures with the limit
+ *     when a simple if statement does the job,
+ *   - run-time checks (eg read fuse/strap registers) are needed.
+ *
+ * This function needs to be called:
+ *   - after the MMIO has been setup as we are reading registers,
+ *   - after the PCH has been detected,
+ *   - before the first usage of the fields it can tweak.
+ */
+void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
+{
+	struct intel_device_info *info = mkwrite_device_info(dev_priv);
+	enum pipe pipe;
+
+	/*
+	 * Skylake and Broxton currently don't expose the topmost plane as its
+	 * use is exclusive with the legacy cursor and we only want to expose
+	 * one of those, not both. Until we can safely expose the topmost plane
+	 * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
+	 * we don't expose the topmost plane at all to prevent ABI breakage
+	 * down the line.
+	 */
+	if (IS_BROXTON(dev_priv)) {
+		info->num_sprites[PIPE_A] = 2;
+		info->num_sprites[PIPE_B] = 2;
+		info->num_sprites[PIPE_C] = 1;
+	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 2;
+	else
+		for_each_pipe(dev_priv, pipe)
+			info->num_sprites[pipe] = 1;
+
+	if (i915.disable_display) {
+		DRM_INFO("Display disabled (module parameter)\n");
+		info->num_pipes = 0;
+	} else if (info->num_pipes > 0 &&
+		   (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
+		   HAS_PCH_SPLIT(dev_priv)) {
+		u32 fuse_strap = I915_READ(FUSE_STRAP);
+		u32 sfuse_strap = I915_READ(SFUSE_STRAP);
+
+		/*
+		 * SFUSE_STRAP is supposed to have a bit signalling the display
+		 * is fused off. Unfortunately it seems that, at least in
+		 * certain cases, fused off display means that PCH display
+		 * reads don't land anywhere. In that case, we read 0s.
+		 *
+		 * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
+		 * should be set when taking over after the firmware.
+		 */
+		if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
+		    sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
+		    (dev_priv->pch_type == PCH_CPT &&
+		     !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
+			DRM_INFO("Display fused off, disabling\n");
+			info->num_pipes = 0;
+		} else if (fuse_strap & IVB_PIPE_C_DISABLE) {
+			DRM_INFO("PipeC fused off\n");
+			info->num_pipes -= 1;
+		}
+	} else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
+		u32 dfsm = I915_READ(SKL_DFSM);
+		u8 disabled_mask = 0;
+		bool invalid;
+		int num_bits;
+
+		if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
+			disabled_mask |= BIT(PIPE_A);
+		if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
+			disabled_mask |= BIT(PIPE_B);
+		if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
+			disabled_mask |= BIT(PIPE_C);
+
+		num_bits = hweight8(disabled_mask);
+
+		switch (disabled_mask) {
+		case BIT(PIPE_A):
+		case BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_B):
+		case BIT(PIPE_A) | BIT(PIPE_C):
+			invalid = true;
+			break;
+		default:
+			invalid = false;
+		}
+
+		if (num_bits > info->num_pipes || invalid)
+			DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
+				  disabled_mask);
+		else
+			info->num_pipes -= num_bits;
+	}
+
+	/* Initialize slice/subslice/EU info */
+	if (IS_CHERRYVIEW(dev_priv))
+		cherryview_sseu_info_init(dev_priv);
+	else if (IS_BROADWELL(dev_priv))
+		broadwell_sseu_info_init(dev_priv);
+	else if (INTEL_INFO(dev_priv)->gen >= 9)
+		gen9_sseu_info_init(dev_priv);
+
+	info->has_snoop = !info->has_llc;
+
+	/* Snooping is broken on BXT A stepping. */
+	if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1))
+		info->has_snoop = false;
+
+	DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+	DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+	DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+	DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+	DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+	DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+			 info->has_slice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+			 info->has_subslice_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+			 info->has_eu_pg ? "y" : "n");
+}