ALSA: hda/ca0132 - Ensure DSP is properly setup post-firmware download.

Make sure that the DSP has no DMA channels allocated once the firmware
is downloaded, and that the default audio streams in use by the DSP are
setup in the correct order.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 119 insertions, 0 deletions

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index f9fafd0f725b..c3ae9e4f715b 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -1863,6 +1863,18 @@ static void chipio_set_stream_control(struct hda_codec *codec,
 			CONTROL_PARAM_STREAM_CONTROL, enable);
 }
 
+/*
+ * Get ChipIO audio stream's status.
+ */
+static void chipio_get_stream_control(struct hda_codec *codec,
+				int streamid, unsigned int *enable)
+{
+	chipio_set_control_param_no_mutex(codec,
+			CONTROL_PARAM_STREAM_ID, streamid);
+	*enable = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
+			   VENDOR_CHIPIO_PARAM_GET,
+			   CONTROL_PARAM_STREAM_CONTROL);
+}
 
 /*
  * Set sampling rate of the connection point. NO MUTEX.
@@ -7513,6 +7525,109 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec)
 	}
 }
 
+
+/* If there is an active channel for some reason, find it and free it. */
+static void ca0132_alt_free_active_dma_channels(struct hda_codec *codec)
+{
+	unsigned int i, tmp;
+	int status;
+
+	/* Read active DSPDMAC channel register. */
+	status = chipio_read(codec, DSPDMAC_CHNLSTART_MODULE_OFFSET, &tmp);
+	if (status >= 0) {
+		/* AND against 0xfff to get the active channel bits. */
+		tmp = tmp & 0xfff;
+
+		/* If there are no active channels, nothing to free. */
+		if (!tmp)
+			return;
+	} else {
+		codec_dbg(codec, "%s: Failed to read active DSP DMA channel register.\n",
+				__func__);
+		return;
+	}
+
+	/*
+	 * Check each DSP DMA channel for activity, and if the channel is
+	 * active, free it.
+	 */
+	for (i = 0; i < DSPDMAC_DMA_CFG_CHANNEL_COUNT; i++) {
+		if (dsp_is_dma_active(codec, i)) {
+			status = dspio_free_dma_chan(codec, i);
+			if (status < 0)
+				codec_dbg(codec, "%s: Failed to free active DSP DMA channel %d.\n",
+						__func__, i);
+		}
+	}
+}
+
+/*
+ * In the case of CT_EXTENSIONS_ENABLE being set to 1, and the DSP being in
+ * use, audio is no longer routed directly to the DAC/ADC from the HDA stream.
+ * Instead, audio is now routed through the DSP's DMA controllers, which
+ * the DSP is tasked with setting up itself. Through debugging, it seems the
+ * cause of most of the no-audio on startup issues were due to improperly
+ * configured DSP DMA channels.
+ *
+ * Normally, the DSP configures these the first time an HDA audio stream is
+ * started post DSP firmware download. That is why creating a 'dummy' stream
+ * worked in fixing the audio in some cases. This works most of the time, but
+ * sometimes if a stream is started/stopped before the DSP can setup the DMA
+ * configuration registers, it ends up in a broken state. Issues can also
+ * arise if streams are started in an unusual order, i.e the audio output dma
+ * channel being sandwiched between the mic1 and mic2 dma channels.
+ *
+ * The solution to this is to make sure that the DSP has no DMA channels
+ * in use post DSP firmware download, and then to manually start each default
+ * DSP stream that uses the DMA channels. These are 0x0c, the audio output
+ * stream, 0x03, analog mic 1, and 0x04, analog mic 2.
+ */
+static void ca0132_alt_start_dsp_audio_streams(struct hda_codec *codec)
+{
+	const unsigned int dsp_dma_stream_ids[] = { 0x0c, 0x03, 0x04 };
+	struct ca0132_spec *spec = codec->spec;
+	unsigned int i, tmp;
+
+	/*
+	 * Check if any of the default streams are active, and if they are,
+	 * stop them.
+	 */
+	mutex_lock(&spec->chipio_mutex);
+
+	for (i = 0; i < ARRAY_SIZE(dsp_dma_stream_ids); i++) {
+		chipio_get_stream_control(codec, dsp_dma_stream_ids[i], &tmp);
+
+		if (tmp) {
+			chipio_set_stream_control(codec,
+					dsp_dma_stream_ids[i], 0);
+		}
+	}
+
+	mutex_unlock(&spec->chipio_mutex);
+
+	/*
+	 * If all DSP streams are inactive, there should be no active DSP DMA
+	 * channels. Check and make sure this is the case, and if it isn't,
+	 * free any active channels.
+	 */
+	ca0132_alt_free_active_dma_channels(codec);
+
+	mutex_lock(&spec->chipio_mutex);
+
+	/* Make sure stream 0x0c is six channels. */
+	chipio_set_stream_channels(codec, 0x0c, 6);
+
+	for (i = 0; i < ARRAY_SIZE(dsp_dma_stream_ids); i++) {
+		chipio_set_stream_control(codec,
+				dsp_dma_stream_ids[i], 1);
+
+		/* Give the DSP some time to setup the DMA channel. */
+		msleep(75);
+	}
+
+	mutex_unlock(&spec->chipio_mutex);
+}
+
 /*
  * The region of ChipIO memory from 0x190000-0x1903fc is a sort of 'audio
  * router', where each entry represents a 48khz audio channel, with a format
@@ -8250,6 +8365,7 @@ static void r3d_setup_defaults(struct hda_codec *codec)
 
 	ca0132_alt_dsp_scp_startup(codec);
 	ca0132_alt_init_analog_mics(codec);
+	ca0132_alt_start_dsp_audio_streams(codec);
 
 	/*remove DSP headroom*/
 	tmp = FLOAT_ZERO;
@@ -8300,6 +8416,7 @@ static void sbz_setup_defaults(struct hda_codec *codec)
 
 	ca0132_alt_dsp_scp_startup(codec);
 	ca0132_alt_init_analog_mics(codec);
+	ca0132_alt_start_dsp_audio_streams(codec);
 	sbz_connect_streams(codec);
 	sbz_chipio_startup_data(codec);
 
@@ -8359,6 +8476,7 @@ static void ae5_setup_defaults(struct hda_codec *codec)
 
 	ca0132_alt_dsp_scp_startup(codec);
 	ca0132_alt_init_analog_mics(codec);
+	ca0132_alt_start_dsp_audio_streams(codec);
 	chipio_set_stream_control(codec, 0x03, 1);
 	chipio_set_stream_control(codec, 0x04, 1);
 
@@ -8428,6 +8546,7 @@ static void ae7_setup_defaults(struct hda_codec *codec)
 
 	ca0132_alt_dsp_scp_startup(codec);
 	ca0132_alt_init_analog_mics(codec);
+	ca0132_alt_start_dsp_audio_streams(codec);
 	ae7_post_dsp_setup_ports(codec);
 
 	tmp = FLOAT_ZERO;