diff options
| author | Jacob Chen <jacob-chen@iotwrt.com> | 2017-10-01 12:22:37 +0200 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@osg.samsung.com> | 2017-10-27 16:12:49 +0200 |
| commit | 7bc9f038d02c2fc14e53e4aaca651deaf6d0de3f (patch) | |
| tree | 5fa566a5f3dd39ba55209501763eea500d8f926b | |
| parent | 71862f63f351078560a7ce35c6c2e2ca16750374 (diff) | |
media: i2c: OV5647: ensure clock lane in LP-11 state before streaming on
When I was supporting Rpi Camera Module on the ASUS Tinker board,
I found this driver have some issues with rockchip's mipi-csi driver.
It didn't place clock lane in LP-11 state before performing
D-PHY initialisation.
>From our experience, on some OV sensors,
LP-11 state is not achieved while BIT(5)-0x4800 is cleared.
So let's set BIT(5) and BIT(0) both while not streaming, in order to
coax the clock lane into LP-11 state.
0x4800 : MIPI CTRL 00
BIT(5) : clock lane gate enable
0: continuous
1: none-continuous
BIT(0) : manually set clock lane
0: Not used
1: used
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: Luis Oliveira <lolivei@synopsys.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| -rw-r--r-- | drivers/media/i2c/ov5647.c | 13 |
1 files changed, 12 insertions, 1 deletions
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c index 95ce90fdb876..247302d01f53 100644 --- a/drivers/media/i2c/ov5647.c +++ b/drivers/media/i2c/ov5647.c @@ -253,6 +253,10 @@ static int ov5647_stream_on(struct v4l2_subdev *sd) { int ret; + ret = ov5647_write(sd, 0x4800, 0x04); + if (ret < 0) + return ret; + ret = ov5647_write(sd, 0x4202, 0x00); if (ret < 0) return ret; @@ -264,6 +268,10 @@ static int ov5647_stream_off(struct v4l2_subdev *sd) { int ret; + ret = ov5647_write(sd, 0x4800, 0x25); + if (ret < 0) + return ret; + ret = ov5647_write(sd, 0x4202, 0x0f); if (ret < 0) return ret; @@ -320,7 +328,10 @@ static int __sensor_init(struct v4l2_subdev *sd) return ret; } - return ov5647_write(sd, 0x4800, 0x04); + /* + * stream off to make the clock lane into LP-11 state. + */ + return ov5647_stream_off(sd); } static int ov5647_sensor_power(struct v4l2_subdev *sd, int on) |