net: phy: remove the .did_interrupt() and .ack_interrupt() callback

Now that all the PHY drivers have been migrated to directly implement
the generic .handle_interrupt() callback for a seamless support of
shared IRQs and all the .config_inter() implementations clear any
pending interrupts, we can safely remove the two callbacks.

With this patch, phylib has a proper support for shared IRQs (and not
just for multi-PHY devices. A PHY driver must implement both the
.handle_interrupt() and .config_intr() callbacks for the IRQs to be
actually used.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 7 insertions, 62 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index dce86bad8231..45f75533c47c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -114,23 +114,6 @@ void phy_print_status(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_print_status);
 
 /**
- * phy_clear_interrupt - Ack the phy device's interrupt
- * @phydev: the phy_device struct
- *
- * If the @phydev driver has an ack_interrupt function, call it to
- * ack and clear the phy device's interrupt.
- *
- * Returns 0 on success or < 0 on error.
- */
-static int phy_clear_interrupt(struct phy_device *phydev)
-{
-	if (phydev->drv->ack_interrupt)
-		return phydev->drv->ack_interrupt(phydev);
-
-	return 0;
-}
-
-/**
  * phy_config_interrupt - configure the PHY device for the requested interrupts
  * @phydev: the phy_device struct
  * @interrupts: interrupt flags to configure for this @phydev
@@ -943,15 +926,8 @@ EXPORT_SYMBOL(phy_error);
  */
 int phy_disable_interrupts(struct phy_device *phydev)
 {
-	int err;
-
 	/* Disable PHY interrupts */
-	err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-	if (err)
-		return err;
-
-	/* Clear the interrupt */
-	return phy_clear_interrupt(phydev);
+	return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
 }
 
 /**
@@ -966,22 +942,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 	struct phy_device *phydev = phy_dat;
 	struct phy_driver *drv = phydev->drv;
 
-	if (drv->handle_interrupt)
-		return drv->handle_interrupt(phydev);
-
-	if (drv->did_interrupt && !drv->did_interrupt(phydev))
-		return IRQ_NONE;
-
-	/* reschedule state queue work to run as soon as possible */
-	phy_trigger_machine(phydev);
-
-	/* did_interrupt() may have cleared the interrupt already */
-	if (!drv->did_interrupt && phy_clear_interrupt(phydev)) {
-		phy_error(phydev);
-		return IRQ_NONE;
-	}
-
-	return IRQ_HANDLED;
+	return drv->handle_interrupt(phydev);
 }
 
 /**
@@ -990,11 +951,6 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
  */
 static int phy_enable_interrupts(struct phy_device *phydev)
 {
-	int err = phy_clear_interrupt(phydev);
-
-	if (err < 0)
-		return err;
-
 	return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
 }
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 81f672911305..80c2e646c093 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2826,7 +2826,7 @@ EXPORT_SYMBOL(phy_get_internal_delay);
 
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
-	return phydrv->config_intr && (phydrv->ack_interrupt || phydrv->handle_interrupt);
+	return phydrv->config_intr && phydrv->handle_interrupt;
 }
 
 /**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8849a00a093f..381a95732b6a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -743,18 +743,11 @@ struct phy_driver {
 	/** @read_status: Determines the negotiated speed and duplex */
 	int (*read_status)(struct phy_device *phydev);
 
-	/** @ack_interrupt: Clears any pending interrupts */
-	int (*ack_interrupt)(struct phy_device *phydev);
-
-	/** @config_intr: Enables or disables interrupts */
-	int (*config_intr)(struct phy_device *phydev);
-
-	/**
-	 * @did_interrupt: Checks if the PHY generated an interrupt.
-	 * For multi-PHY devices with shared PHY interrupt pin
-	 * Set interrupt bits have to be cleared.
+	/** @config_intr: Enables or disables interrupts.
+	 * It should also clear any pending interrupts prior to enabling the
+	 * IRQs and after disabling them.
 	 */
-	int (*did_interrupt)(struct phy_device *phydev);
+	int (*config_intr)(struct phy_device *phydev);
 
 	/** @handle_interrupt: Override default interrupt handling */
 	irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
@@ -1487,10 +1480,6 @@ static inline int genphy_config_aneg(struct phy_device *phydev)
 	return __genphy_config_aneg(phydev, false);
 }
 
-static inline int genphy_no_ack_interrupt(struct phy_device *phydev)
-{
-	return 0;
-}
 static inline int genphy_no_config_intr(struct phy_device *phydev)
 {
 	return 0;