Merge tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Versatile DT cleanups from Linus Walleij:

"this is a first pull request for my cleanups for the Versatile, as
the finished stuff should not be sitting in my tree but in ARM SoC.
This completes the ARM RealView PB1176 and PB11MPCore device trees,
and moves the Versatile to use power/reset.

The idea is to keep working on this cleanup branch and send additional
patches on top of this one as the prerequisites are merged into the MTD
and FBDEV subsystems. So please create a special versatile cleanup branch
(or suggest another approach).

As it happens, board files and device trees need to change at the same
time to make logical sense, especially for Versatile where auxdata is
replaced with DT entries, such as when reset is moved in the last patch
in this set. The MTD and CLCD changes will share this characteristic."

Versatile family cleanups step 1:
- Finalize RealView the PB1176 and PB11MPCore device trees
- Move Versatile to use the power/reset driver instead of a
  custom restart hook

* tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: versatile: move restart to the device tree
  ARM: realview: add the DS1338 RTC to PB1176 DT
  ARM: pb1176: add ethernet to devicetree
  ARM: pb1176: add ISP1761 USB OTG host controller
  ARM: pb1176: add AACI to the device tree
  ARM: pb1176: add ICST307 clocks to the device tree
  ARM: realview: fix up PB11MP flash compat strings
  ARM: realview: add flash devices to the PB1176 DTS

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 123 insertions, 17 deletions

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 1bc64cda819e..652d85b28aaa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -53,6 +53,14 @@
 		regulator-boot-on;
         };
 
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -106,6 +114,53 @@
 		clock-frequency = <0>;
 	};
 
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		port1-otg;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,6 +231,41 @@
 				label = "versatile:7";
 				default-state = "off";
 			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
 		};
 
 		/* Primary DevChip GIC synthesized with the CPU */
@@ -297,6 +387,13 @@
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
 	};
 
 	/* These peripherals are inside the FPGA rather than the DevChip */
@@ -306,6 +403,27 @@
 		compatible = "simple-bus";
 		ranges;
 
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
 		fpga_mci: mmcsd@10005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x10005000 0x1000>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index da755c9851a7..63d6a051839f 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -230,14 +230,14 @@
 
 	flash0@40000000 {
 		/* 2 * 32MiB NOR Flash memory */
-		compatible = "arm,vexpress-flash", "cfi-flash";
+		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
 	};
 
 	flash1@44000000 {
 		// 2 * 32MiB NOR Flash memory
-		compatible = "arm,vexpress-flash", "cfi-flash";
+		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
 	};
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index e40f777ccf7d..b0cc26284fc9 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -8,8 +8,11 @@ config ARCH_VERSATILE
 	select COMMON_CLK_VERSATILE
 	select CPU_ARM926T
 	select ICST
+	select MFD_SYSCON
 	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
 	select VERSATILE_FPGA_IRQ
 	help
 	  This enables support for ARM Ltd Versatile board.
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index c44871851255..dff1c0595b67 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -52,8 +52,6 @@
  *  Versatile Registers
  * ------------------------------------------------------------------------
  */
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
 #define VERSATILE_SYS_PCICTL_OFFSET           0x44
 #define VERSATILE_SYS_MCI_OFFSET              0x48
 #define VERSATILE_SYS_FLASH_OFFSET            0x4C
@@ -345,18 +343,6 @@ static void __init versatile_init_early(void)
 	       __io_address(VERSATILE_SCTL_BASE));
 }
 
-static void versatile_restart(enum reboot_mode mode, const char *cmd)
-{
-	u32 val;
-
-	val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
-	val |= 0x105;
-
-	writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
-	writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
-	writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
-}
-
 static void __init versatile_dt_pci_init(void)
 {
 	u32 val;
@@ -420,5 +406,4 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.init_early	= versatile_init_early,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
-	.restart	= versatile_restart,
 MACHINE_END