Merge tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.12 please pull the following:

- Rafal continues to add support for the 4906/4908 SoC family and adds
  a Device Tree for the Netgear R8000P router (4906-based), describes
  the NAND controller of the 4908 more appropriately (based on the older
  63138 DSL SoC), describes the 4908 PCIe reset controller, internal
  Ethernet switch (Starfighter 2 switch) and finally the Power
  Management Bus (PMB)

- Scott removes all of the SATA-related Device Tree nodes since SATA
  is unused on the Stingray product line

* tag 'arm-soc/for-5.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: Remove SATA from Stingray
  arm64: dts: broadcom: bcm4908: describe PMB block
  arm64: dts: broadcom: bcm4908: describe internal switch
  arm64: dts: broadcom: bcm4908: describe PCIe reset controller
  arm64: dts: broadcom: bcm4908: use proper NAND binding
  arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files
  dt-bindings: arm: bcm: document Netgear R8000P binding

Link: https://lore.kernel.org/r/20210131221721.685974-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

9 files changed, 239 insertions, 351 deletions

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
index 5fec063d9a13..e55731f43c84 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
@@ -19,6 +19,8 @@ properties:
     oneOf:
       - description: BCM4906 based boards
         items:
+          - enum:
+              - netgear,r8000p
           - const: brcm,bcm4906
           - const: brcm,bcm4908
 
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
index ef26c23603ce..ebebc0cd421f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
 dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
new file mode 100644
index 000000000000..ee3ed612274c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
+	model = "Netgear R8000P";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "cferom";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "firmware";
+			reg = <0x100000 0x4400000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
new file mode 100644
index 000000000000..66023d553524
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	cpus {
+		/delete-node/ cpu@2;
+
+		/delete-node/ cpu@3;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 13c6b86eef21..6e4ad66ff536 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -44,6 +44,57 @@
 	};
 };
 
+&ports {
+	port@0 {
+		label = "lan2";
+	};
+
+	port@1 {
+		label = "lan1";
+	};
+
+	port@2 {
+		label = "lan6";
+	};
+
+	port@3 {
+		label = "lan5";
+	};
+
+	/* External BCM53134S switch */
+	port@7 {
+		label = "sw";
+		reg = <7>;
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+};
+
+&mdio {
+	/* lan8 */
+	ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	/* lan7 */
+	ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* lan4 */
+	ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	/* lan3 */
+	ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &nandcs {
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index f873dc44ce9c..9354077f74cd 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -108,7 +108,7 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0x80000000 0x10000>;
+		ranges = <0x00 0x00 0x80000000 0x281000>;
 
 		usb@c300 {
 			compatible = "generic-ehci";
@@ -130,6 +130,104 @@
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		ethernet-switch@80000 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0 0x80000 0x50000>;
+
+			ethernet-switch@0 {
+				compatible = "brcm,bcm4908-switch";
+				reg = <0x0 0x40000>,
+				      <0x40000 0x110>,
+				      <0x40340 0x30>,
+				      <0x40380 0x30>,
+				      <0x40600 0x34>,
+				      <0x40800 0x208>;
+				reg-names = "core", "reg", "intrl2_0",
+					    "intrl2_1", "fcb", "acb";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				brcm,num-gphy = <5>;
+				brcm,num-rgmii-ports = <2>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "internal";
+						phy-handle = <&phy8>;
+					};
+
+					port@1 {
+						reg = <1>;
+						phy-mode = "internal";
+						phy-handle = <&phy9>;
+					};
+
+					port@2 {
+						reg = <2>;
+						phy-mode = "internal";
+						phy-handle = <&phy10>;
+					};
+
+					port@3 {
+						reg = <3>;
+						phy-mode = "internal";
+						phy-handle = <&phy11>;
+					};
+				};
+			};
+
+			mdio: mdio@405c0 {
+				compatible = "brcm,unimac-mdio";
+				reg = <0x405c0 0x8>;
+				reg-names = "mdio";
+				#size-cells = <0>;
+				#address-cells = <1>;
+
+				phy8: ethernet-phy@8 {
+					reg = <8>;
+				};
+
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				phy10: ethernet-phy@a {
+					reg = <10>;
+				};
+
+				phy11: ethernet-phy@b {
+					reg = <11>;
+				};
+
+				phy12: ethernet-phy@c {
+					reg = <12>;
+				};
+			};
+		};
+
+		procmon: syscon@280000 {
+			compatible = "simple-bus";
+			reg = <0x280000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			power-controller@2800c0 {
+				compatible = "brcm,bcm4908-pmb";
+				reg = <0x2800c0 0x40>;
+				#power-domain-cells = <1>;
+			};
+		};
 	};
 
 	bus@ff800000 {
@@ -164,7 +262,7 @@
 		nand@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -177,6 +275,21 @@
 			};
 		};
 
+		misc@2600 {
+			compatible = "brcm,misc", "simple-mfd";
+			reg = <0x2600 0xe4>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00 0x2600 0xe4>;
+
+			reset-controller@2644 {
+				compatible = "brcm,bcm4908-misc-pcie-reset";
+				reg = <0x44 0x04>;
+				#reset-cells = <1>;
+			};
+		};
+
 		reboot {
 			compatible = "syscon-reboot";
 			regmap = <&timer>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 43aa5e9c0020..8fe7325cfbb2 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -56,70 +56,6 @@
 	};
 };
 
-&sata0 {
-	status = "okay";
-};
-
-&sata_phy0{
-	status = "okay";
-};
-
-&sata1 {
-	status = "okay";
-};
-
-&sata_phy1{
-	status = "okay";
-};
-
-&sata2 {
-	status = "okay";
-};
-
-&sata_phy2{
-	status = "okay";
-};
-
-&sata3 {
-	status = "okay";
-};
-
-&sata_phy3{
-	status = "okay";
-};
-
-&sata4 {
-	status = "okay";
-};
-
-&sata_phy4{
-	status = "okay";
-};
-
-&sata5 {
-	status = "okay";
-};
-
-&sata_phy5{
-	status = "okay";
-};
-
-&sata6 {
-	status = "okay";
-};
-
-&sata_phy6{
-	status = "okay";
-};
-
-&sata7 {
-	status = "okay";
-};
-
-&sata_phy7{
-	status = "okay";
-};
-
 &pwm {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
deleted file mode 100644
index 8c68e0c26f1b..000000000000
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-	sata {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x67d00000 0x00800000>;
-
-		sata0: ahci@0 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00000000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata0_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata0_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy0: sata_phy@2100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00002100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata0_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata1: ahci@10000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00010000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata1_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata1_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy1: sata_phy@12100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00012100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata1_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata2: ahci@20000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00020000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata2_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata2_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy2: sata_phy@22100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00022100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata2_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata3: ahci@30000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00030000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata3_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata3_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy3: sata_phy@32100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00032100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata3_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata4: ahci@100000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00100000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata4_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata4_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy4: sata_phy@102100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00102100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata4_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata5: ahci@110000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00110000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata5_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata5_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy5: sata_phy@112100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00112100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata5_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata6: ahci@120000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00120000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata6_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata6_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy6: sata_phy@122100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00122100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata6_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		sata7: ahci@130000 {
-			compatible = "brcm,iproc-ahci", "generic-ahci";
-			reg = <0x00130000 0x1000>;
-			reg-names = "ahci";
-			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata7_port0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata7_phy0>;
-				phy-names = "sata-phy";
-			};
-		};
-
-		sata_phy7: sata_phy@132100 {
-			compatible = "brcm,iproc-sr-sata-phy";
-			reg = <0x00132100 0x1000>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata7_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index b425b12c3ed2..2ffb2c92182a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -285,7 +285,6 @@
 	};
 
 	#include "stingray-fs4.dtsi"
-	#include "stingray-sata.dtsi"
 	#include "stingray-pcie.dtsi"
 	#include "stingray-usb.dtsi"
 
@@ -309,12 +308,6 @@
 				#size-cells = <0>;
 			};
 
-			mdio@2 { /* SATA */
-				reg = <0x2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
 			mdio@3 { /* USB */
 				reg = <0x3>;
 				#address-cells = <1>;