diff options
author | John W. Linville <linville@tuxdriver.com> | 2013-02-08 14:41:45 -0500 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2013-02-08 14:41:45 -0500 |
commit | 4d25a75bc6c3f71d8cd736cb5d9bb2ad4ba80792 (patch) | |
tree | 12307df2501537577dfe12b5966c47a58166aef3 | |
parent | 3549c6b1953c3e951e71fbec94f9ed203c4754e7 (diff) | |
parent | 9c3a8d99346040010a82ae8088b055f85cf8a2e9 (diff) |
Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
-rw-r--r-- | arch/arm/mach-omap2/board-omap3evm.c | 10 | ||||
-rw-r--r-- | drivers/net/wireless/ti/Kconfig | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ti/Makefile | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wilink_platform_data.c (renamed from drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c) | 0 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wl12xx/main.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wl18xx/conf.h | 7 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wl18xx/main.c | 5 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/Kconfig | 5 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/Makefile | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/boot.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/cmd.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/main.c | 17 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/sdio.c | 33 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/spi.c | 28 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/wlcore.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/wlcore_i.h | 5 | ||||
-rw-r--r-- | include/linux/wl12xx.h | 16 |
17 files changed, 99 insertions, 59 deletions
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3985f35aee06..a4ca63ba7faa 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = 63, .deferred = true, }, -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA { .name = "wl1271", .mmc = 2, @@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = { .consumer_supplies = omap3evm_vio_supply, }; -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) @@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = { OMAP_PIN_OFF_NONE), OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = { OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE), -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA /* WLAN IRQ - GPIO 149 */ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), @@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = { static void __init omap3_evm_wl12xx_init(void) { -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int ret; /* WL12xx WLAN Init */ diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig index be800119d0a3..cbe1e7fef61b 100644 --- a/drivers/net/wireless/ti/Kconfig +++ b/drivers/net/wireless/ti/Kconfig @@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig" # keep last for automatic dependencies source "drivers/net/wireless/ti/wlcore/Kconfig" + +config WILINK_PLATFORM_DATA + bool "TI WiLink platform data" + depends on WLCORE_SDIO || WL1251_SDIO + default y + ---help--- + Small platform data bit needed to pass data to the sdio modules. + + endif # WL_TI diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile index 4d6823983c04..af14231aeede 100644 --- a/drivers/net/wireless/ti/Makefile +++ b/drivers/net/wireless/ti/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_WLCORE) += wlcore/ obj-$(CONFIG_WL12XX) += wl12xx/ -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/ obj-$(CONFIG_WL1251) += wl1251/ obj-$(CONFIG_WL18XX) += wl18xx/ + +# small builtin driver bit +obj-$(CONFIG_WILINK_PLATFORM_DATA) += wilink_platform_data.o diff --git a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c index 998e95895f9d..998e95895f9d 100644 --- a/drivers/net/wireless/ti/wlcore/wl12xx_platform_data.c +++ b/drivers/net/wireless/ti/wilink_platform_data.c diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 3254bfc81a2a..09694e39bb14 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1703,7 +1703,8 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { static int wl12xx_setup(struct wl1271 *wl) { struct wl12xx_priv *priv = wl->priv; - struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; wl->rtable = wl12xx_rtable; wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; diff --git a/drivers/net/wireless/ti/wl18xx/conf.h b/drivers/net/wireless/ti/wl18xx/conf.h index b5f114857191..e34302e3b51d 100644 --- a/drivers/net/wireless/ti/wl18xx/conf.h +++ b/drivers/net/wireless/ti/wl18xx/conf.h @@ -23,7 +23,7 @@ #define __WL18XX_CONF_H__ #define WL18XX_CONF_MAGIC 0x10e100ca -#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0005) +#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0006) #define WL18XX_CONF_MASK 0x0000ffff #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ sizeof(struct wl18xx_priv_conf)) @@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params { u8 pwr_limit_reference_11_abg; u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; u8 pwr_limit_reference_11p; - u8 spare1[9]; - u8 spare2[9]; + u8 spare1; + u8 per_chan_bo_mode_11_abg[13]; + u8 per_chan_bo_mode_11_p[4]; u8 primary_clock_setting_time; u8 clock_valid_on_wake_up; u8 secondary_clock_setting_time; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 0be1cfc17a86..a10b7a7a215a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .pwr_limit_reference_11p = 0x64, + .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00 }, + .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .psat = 0, diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index d7b907e67170..2b832825c3d4 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -33,8 +33,3 @@ config WLCORE_SDIO If you choose to build a module, it'll be called wlcore_sdio. Say N if unsure. - -config WL12XX_PLATFORM_DATA - bool - depends on WLCORE_SDIO != n || WL1251_SDIO != n - default y diff --git a/drivers/net/wireless/ti/wlcore/Makefile b/drivers/net/wireless/ti/wlcore/Makefile index d9fba9e32130..b21398f6c3ec 100644 --- a/drivers/net/wireless/ti/wlcore/Makefile +++ b/drivers/net/wireless/ti/wlcore/Makefile @@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE) += wlcore.o obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o -# small builtin driver bit -obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o - ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c index b58ae5fc1487..77752b03f189 100644 --- a/drivers/net/wireless/ti/wlcore/boot.c +++ b/drivers/net/wireless/ti/wlcore/boot.c @@ -84,8 +84,8 @@ out: static int wlcore_validate_fw_ver(struct wl1271 *wl) { unsigned int *fw_ver = wl->chip.fw_ver; - unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ? - wl->min_sr_fw_ver : wl->min_mr_fw_ver; + unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ? + wl->min_mr_fw_ver : wl->min_sr_fw_ver; char min_fw_str[32] = ""; int i; diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index 1201aca9c89a..6331f9e1cb39 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -510,10 +510,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif) cmd->sta.hlid = wlvif->sta.hlid; cmd->sta.session = wl->session_ids[wlvif->sta.hlid]; /* - * We don't have the correct remote rates in this stage. the rates - * will be reconfigured later, after authorization. + * We don't have the correct remote rates in this stage. The + * rates will be reconfigured later, after association, if the + * firmware supports ACX_PEER_CAP. Otherwise, there's nothing + * we can do, so use all supported_rates here. */ - cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set); + cmd->sta.remote_rates = cpu_to_le32(supported_rates); wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d " "basic_rate_set: 0x%x, remote_rates: 0x%x", diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index e1dfdf94d0f7..28a37576d568 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) return 0; } -static bool wl12xx_init_fw(struct wl1271 *wl) +static int wl12xx_init_fw(struct wl1271 *wl) { int retries = WL1271_BOOT_RETRIES; bool booted = false; @@ -2228,7 +2228,7 @@ power_off: wl->state = WLCORE_STATE_ON; out: - return booted; + return ret; } static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif) @@ -2371,7 +2371,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, struct vif_counter_data vif_count; int ret = 0; u8 role_type; - bool booted = false; vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | IEEE80211_VIF_SUPPORTS_CQM_RSSI; @@ -2432,11 +2431,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, */ memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN); - booted = wl12xx_init_fw(wl); - if (!booted) { - ret = -EINVAL; + ret = wl12xx_init_fw(wl); + if (ret < 0) goto out; - } } ret = wl12xx_cmd_role_enable(wl, vif->addr, @@ -5966,7 +5963,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) { struct wl1271 *wl = context; struct platform_device *pdev = wl->pdev; - struct wl12xx_platform_data *pdata = pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data; + struct wl12xx_platform_data *pdata = pdev_data->pdata; unsigned long irqflags; int ret; @@ -5995,8 +5993,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->irq = platform_get_irq(pdev, 0); wl->platform_quirks = pdata->platform_quirks; - wl->set_power = pdata->set_power; - wl->if_ops = pdata->ops; + wl->if_ops = pdev_data->if_ops; if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) irqflags = IRQF_TRIGGER_RISING; diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index d4f184e2efed..198028df6f4b 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -217,7 +217,7 @@ static struct wl1271_if_operations sdio_ops = { static int wl1271_probe(struct sdio_func *func, const struct sdio_device_id *id) { - struct wl12xx_platform_data *wlan_data; + struct wlcore_platdev_data *pdev_data; struct wl12xx_sdio_glue *glue; struct resource res[1]; mmc_pm_flag_t mmcflags; @@ -228,10 +228,18 @@ static int wl1271_probe(struct sdio_func *func, if (func->num != 0x02) return -ENODEV; + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&func->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->if_ops = &sdio_ops; + glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&func->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &func->dev; @@ -242,9 +250,9 @@ static int wl1271_probe(struct sdio_func *func, /* Use block mode for transferring over one block size of data */ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; - wlan_data = wl12xx_get_platform_data(); - if (IS_ERR(wlan_data)) { - ret = PTR_ERR(wlan_data); + pdev_data->pdata = wl12xx_get_platform_data(); + if (IS_ERR(pdev_data->pdata)) { + ret = PTR_ERR(pdev_data->pdata); dev_err(glue->dev, "missing wlan platform data: %d\n", ret); goto out_free_glue; } @@ -254,9 +262,7 @@ static int wl1271_probe(struct sdio_func *func, dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); if (mmcflags & MMC_PM_KEEP_POWER) - wlan_data->pwr_in_suspend = true; - - wlan_data->ops = &sdio_ops; + pdev_data->pdata->pwr_in_suspend = true; sdio_set_drvdata(func, glue); @@ -274,7 +280,7 @@ static int wl1271_probe(struct sdio_func *func, else chip_family = "wl12xx"; - glue->core = platform_device_alloc(chip_family, -1); + glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device"); ret = -ENOMEM; @@ -285,7 +291,7 @@ static int wl1271_probe(struct sdio_func *func, memset(res, 0x00, sizeof(res)); - res[0].start = wlan_data->irq; + res[0].start = pdev_data->pdata->irq; res[0].flags = IORESOURCE_IRQ; res[0].name = "irq"; @@ -295,8 +301,8 @@ static int wl1271_probe(struct sdio_func *func, goto out_dev_put; } - ret = platform_device_add_data(glue->core, wlan_data, - sizeof(*wlan_data)); + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -315,6 +321,9 @@ out_dev_put: out_free_glue: kfree(glue); +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 2d700b7ae14c..5ad2e100e59b 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -327,22 +327,29 @@ static struct wl1271_if_operations spi_ops = { static int wl1271_probe(struct spi_device *spi) { struct wl12xx_spi_glue *glue; - struct wl12xx_platform_data *pdata; + struct wlcore_platdev_data *pdev_data; struct resource res[1]; int ret = -ENOMEM; - pdata = spi->dev.platform_data; - if (!pdata) { + pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL); + if (!pdev_data) { + dev_err(&spi->dev, "can't allocate platdev_data\n"); + goto out; + } + + pdev_data->pdata = spi->dev.platform_data; + if (!pdev_data->pdata) { dev_err(&spi->dev, "no platform data\n"); - return -ENODEV; + ret = -ENODEV; + goto out_free_pdev_data; } - pdata->ops = &spi_ops; + pdev_data->if_ops = &spi_ops; glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&spi->dev, "can't allocate glue\n"); - goto out; + goto out_free_pdev_data; } glue->dev = &spi->dev; @@ -359,7 +366,7 @@ static int wl1271_probe(struct spi_device *spi) goto out_free_glue; } - glue->core = platform_device_alloc("wl12xx", -1); + glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device\n"); ret = -ENOMEM; @@ -380,7 +387,8 @@ static int wl1271_probe(struct spi_device *spi) goto out_dev_put; } - ret = platform_device_add_data(glue->core, pdata, sizeof(*pdata)); + ret = platform_device_add_data(glue->core, pdev_data, + sizeof(*pdev_data)); if (ret) { dev_err(glue->dev, "can't add platform data\n"); goto out_dev_put; @@ -399,6 +407,10 @@ out_dev_put: out_free_glue: kfree(glue); + +out_free_pdev_data: + kfree(pdev_data); + out: return ret; } diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index ebd8c6fad7cd..af9fecaefc30 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -183,7 +183,6 @@ struct wl1271 { struct wl1271_if_operations *if_ops; - void (*set_power)(bool enable); int irq; spinlock_t wl_lock; diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 20316ac328a2..c845b0ef7f4b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -206,6 +206,11 @@ struct wl1271_if_operations { void (*set_block_size) (struct device *child, unsigned int blksz); }; +struct wlcore_platdev_data { + struct wl12xx_platform_data *pdata; + struct wl1271_if_operations *if_ops; +}; + #define MAX_NUM_KEYS 14 #define MAX_KEY_SIZE 32 diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index 0d6373195d32..a54fe82e704b 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,6 +24,8 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H +#include <linux/err.h> + /* Reference clock values */ enum { WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ @@ -55,17 +57,17 @@ struct wl12xx_platform_data { int board_tcxo_clock; unsigned long platform_quirks; bool pwr_in_suspend; - - struct wl1271_if_operations *ops; }; /* Platform does not support level trigger interrupts */ #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) -#ifdef CONFIG_WL12XX_PLATFORM_DATA +#ifdef CONFIG_WILINK_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); +struct wl12xx_platform_data *wl12xx_get_platform_data(void); + #else static inline @@ -74,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data) return -ENOSYS; } -#endif +static inline +struct wl12xx_platform_data *wl12xx_get_platform_data(void) +{ + return ERR_PTR(-ENODATA); +} -struct wl12xx_platform_data *wl12xx_get_platform_data(void); +#endif #endif |