diff options
| author | Ping-Ke Shih <pkshih@realtek.com> | 2019-12-20 17:21:46 +0800 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2020-01-26 17:38:05 +0200 |
| commit | 35a68fa5f96a80797e11b6952a47c5a84939a7bf (patch) | |
| tree | 2fe34ee33f1e67de36c820a3bd8211f5ba03c1bc | |
| parent | b6c12908a33e4e413523e73464cd5957690f1a76 (diff) | |
rtw88: fix rate mask for 1SS chip
The rate mask is used to tell firmware the supported rate depends on
negotiation. We loop 2 times for all VHT/HT 2SS rate mask first, and then
only keep the part according to chip's NSS.
This commit fixes the logic error of '&' operations for VHT/HT rate, and
we should run this logic before adding legacy rate.
To access HT MCS map, index 0/1 represent MCS 0-7/8-15 respectively. Use
NL80211_BAND_xxx is incorrect, so fix it as well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| -rw-r--r-- | drivers/net/wireless/realtek/rtw88/main.c | 12 |
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index 3d26c4a6e8da..9144b2696618 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -706,8 +706,8 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) if (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80) is_support_sgi = true; } else if (sta->ht_cap.ht_supported) { - ra_mask |= (sta->ht_cap.mcs.rx_mask[NL80211_BAND_5GHZ] << 20) | - (sta->ht_cap.mcs.rx_mask[NL80211_BAND_2GHZ] << 12); + ra_mask |= (sta->ht_cap.mcs.rx_mask[1] << 20) | + (sta->ht_cap.mcs.rx_mask[0] << 12); if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC) stbc_en = HT_STBC_EN; if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING) @@ -717,6 +717,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) is_support_sgi = true; } + if (efuse->hw_cap.nss == 1) + ra_mask &= RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS; + if (hal->current_band_type == RTW_BAND_5G) { ra_mask |= (u64)sta->supp_rates[NL80211_BAND_5GHZ] << 4; if (sta->vht_cap.vht_supported) { @@ -750,11 +753,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) wireless_set = 0; } - if (efuse->hw_cap.nss == 1) { - ra_mask &= RA_MASK_VHT_RATES_1SS; - ra_mask &= RA_MASK_HT_RATES_1SS; - } - switch (sta->bandwidth) { case IEEE80211_STA_RX_BW_80: bw_mode = RTW_CHANNEL_WIDTH_80; |