wl1271: Add structure for firmware configuration values

In order to make the firmware configuration more manageable, collect
hardcoded configuration values into one data structure, and set default values
there.

Add the SoftGemini BT/WLAN coex paramters into the config structure.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 files changed, 274 insertions, 224 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index aa9bb2ea8554..64a327009f2e 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -32,6 +32,8 @@
 #include <linux/bitops.h>
 #include <net/mac80211.h>
 
+#include "wl1271_conf.h"
+
 #define DRIVER_NAME "wl1271"
 #define DRIVER_PREFIX DRIVER_NAME ": "
 
@@ -420,6 +422,9 @@ struct wl1271 {
 
 	/* Used for a workaround to send disconnect before rejoining */
 	bool joined;
+
+	/* Current chipset configuration */
+	struct conf_drv_settings conf;
 };
 
 int wl1271_plt_start(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 6c2989002218..d19d8605b9d2 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -509,6 +509,7 @@ out:
 int wl1271_acx_sg_cfg(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex_param *param;
+	struct conf_sg_settings *c = &wl->conf.sg;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "acx sg cfg");
@@ -520,34 +521,17 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	param->min_rate = RATE_INDEX_24MBPS;
-	param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
-	param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
-	param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
-	param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
-	param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
-	param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
-	param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
-	param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
-	param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
-	param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
-	param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
-	param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
-	param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
-	param->antenna_type = PTA_ANTENNA_TYPE_DEF;
-	param->signal_type = PTA_SIGNALING_TYPE_DEF;
-	param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
-	param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
-	param->max_cts = PTA_MAX_NUM_CTS_DEF;
-	param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
-	param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
-	param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
-	param->wlan_elp_hp = PTA_ELP_HP_DEF;
-	param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
-	param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
-	param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
-	param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
-	param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+	param->per_threshold = c->per_threshold;
+	param->max_scan_compensation_time = c->max_scan_compensation_time;
+	param->nfs_sample_interval = c->nfs_sample_interval;
+	param->load_ratio = c->load_ratio;
+	param->auto_ps_mode = c->auto_ps_mode;
+	param->probe_req_compensation = c->probe_req_compensation;
+	param->scan_window_compensation = c->scan_window_compensation;
+	param->antenna_config = c->antenna_config;
+	param->beacon_miss_threshold = c->beacon_miss_threshold;
+	param->rate_adaptation_threshold = c->rate_adaptation_threshold;
+	param->rate_adaptation_snr = c->rate_adaptation_snr;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 0c704af1953c..8e3b97cff794 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -496,126 +496,18 @@ struct acx_smart_reflex_config_params {
 struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	/*
-	 * The minimum rate of a received WLAN packet in the STA,
-	 * during protective mode, of which a new BT-HP request
-	 * during this Rx will always be respected and gain the antenna.
-	 */
-	u32 min_rate;
-
-	/* Max time the BT HP will be respected. */
-	u16 bt_hp_max_time;
-
-	/* Max time the WLAN HP will be respected. */
-	u16 wlan_hp_max_time;
-
-	/*
-	 * The time between the last BT activity
-	 * and the moment when the sense mode returns
-	 * to SENSE_INACTIVE.
-	 */
-	u16 sense_disable_timer;
-
-	/* Time before the next BT HP instance */
-	u16 rx_time_bt_hp;
-	u16 tx_time_bt_hp;
-
-	/* range: 10-20000    default: 1500 */
-	u16 rx_time_bt_hp_fast;
-	u16 tx_time_bt_hp_fast;
-
-	/* range: 2000-65535  default: 8700 */
-	u16 wlan_cycle_fast;
-
-	/* range: 0 - 15000 (Msec) default: 1000 */
-	u16 bt_anti_starvation_period;
-
-	/* range 400-10000(Usec) default: 3000 */
-	u16 next_bt_lp_packet;
-
-	/* Deafult: worst case for BT DH5 traffic */
-	u16 wake_up_beacon;
-
-	/* range: 0-50000(Usec) default: 1050 */
-	u16 hp_dm_max_guard_time;
-
-	/*
-	 * This is to prevent both BT & WLAN antenna
-	 * starvation.
-	 * Range: 100-50000(Usec) default:2550
-	 */
-	u16 next_wlan_packet;
-
-	/* 0 -> shared antenna */
-	u8 antenna_type;
-
-	/*
-	 * 0 -> TI legacy
-	 * 1 -> Palau
-	 */
-	u8 signal_type;
-
-	/*
-	 * BT AFH status
-	 * 0 -> no AFH
-	 * 1 -> from dedicated GPIO
-	 * 2 -> AFH on (from host)
-	 */
-	u8 afh_leverage_on;
-
-	/*
-	 * The number of cycles during which no
-	 * TX will be sent after 1 cycle of RX
-	 * transaction in protective mode
-	 */
-	u8 quiet_cycle_num;
-
-	/*
-	 * The maximum number of CTSs that will
-	 * be sent for receiving RX packet in
-	 * protective mode
-	 */
-	u8 max_cts;
-
-	/*
-	 * The number of WLAN packets
-	 * transferred in common mode before
-	 * switching to BT.
-	 */
-	u8 wlan_packets_num;
-
-	/*
-	 * The number of BT packets
-	 * transferred in common mode before
-	 * switching to WLAN.
-	 */
-	u8 bt_packets_num;
-
-	/* range: 1-255  default: 5 */
-	u8 missed_rx_avalanche;
-
-	/* range: 0-1    default: 1 */
-	u8 wlan_elp_hp;
-
-	/* range: 0 - 15  default: 4 */
-	u8 bt_anti_starvation_cycles;
-
-	u8 ack_mode_dual_ant;
-
-	/*
-	 * Allow PA_SD assertion/de-assertion
-	 * during enabled BT activity.
-	 */
-	u8 pa_sd_enable;
-
-	/*
-	 * Enable/Disable PTA in auto mode:
-	 * Support Both Active & P.S modes
-	 */
-	u8 pta_auto_mode_enable;
-
-	/* range: 0 - 20  default: 1 */
-	u8 bt_hp_respected_num;
+	u32 per_threshold;
+	u32 max_scan_compensation_time;
+	u16 nfs_sample_interval;
+	u8 load_ratio;
+	u8 auto_ps_mode;
+	u8 probe_req_compensation;
+	u8 scan_window_compensation;
+	u8 antenna_config;
+	u8 beacon_miss_threshold;
+	u32 rate_adaptation_threshold;
+	s8 rate_adaptation_snr;
+	u8 padding[3];
 } __attribute__ ((packed));
 
 #define CCA_THRSH_ENABLE_ENERGY_D       0x140A
@@ -690,6 +582,10 @@ struct acx_event_mask {
 #define SCAN_TRIGGERED		BIT(2)
 #define SCAN_PRIORITY_HIGH	BIT(3)
 
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+#define DF_SNIFF_MODE_ENABLE       0x80
+
 struct acx_feature_config {
 	struct acx_header header;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index eaa1de97339c..c7a8a64d18dd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -229,8 +229,8 @@ int wl1271_cmd_join(struct wl1271 *wl)
 	join->rx_config_options = 0;
 	join->rx_filter_options = WL1271_DEFAULT_RX_FILTER;
 
-	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
-		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+	join->basic_rate_set = CONF_HW_BIT_RATE_1MBPS | CONF_HW_BIT_RATE_2MBPS |
+		CONF_HW_BIT_RATE_5_5MBPS | CONF_HW_BIT_RATE_11MBPS;
 
 	join->beacon_interval = WL1271_DEFAULT_BEACON_INT;
 	join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
@@ -538,7 +538,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 
 	params->params.num_channels = num_channels;
 	params->params.num_probe_requests = probe_requests;
-	params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS);
+	params->params.tx_rate = cpu_to_le32(CONF_HW_BIT_RATE_2MBPS);
 	params->params.tid_trigger = 0;
 	params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 0219664765ec..91430871c8fd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -288,11 +288,6 @@ struct wl1271_cmd_ps_params {
 #define NUM_ACCESS_CATEGORIES_COPY 4
 #define MAX_KEY_SIZE 32
 
-/* When set, disable HW encryption */
-#define DF_ENCRYPTION_DISABLE      0x01
-/* When set, disable HW decryption */
-#define DF_SNIFF_MODE_ENABLE       0x80
-
 enum wl1271_cmd_key_action {
 	KEY_ADD_OR_REPLACE = 1,
 	KEY_REMOVE         = 2,
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
new file mode 100644
index 000000000000..1d6a44bec1cb
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -0,0 +1,178 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_CONF_H__
+#define __WL1271_CONF_H__
+
+enum {
+	CONF_HW_BIT_RATE_1MBPS   = BIT(0),
+	CONF_HW_BIT_RATE_2MBPS   = BIT(1),
+	CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
+	CONF_HW_BIT_RATE_6MBPS   = BIT(3),
+	CONF_HW_BIT_RATE_9MBPS   = BIT(4),
+	CONF_HW_BIT_RATE_11MBPS  = BIT(5),
+	CONF_HW_BIT_RATE_12MBPS  = BIT(6),
+	CONF_HW_BIT_RATE_18MBPS  = BIT(7),
+	CONF_HW_BIT_RATE_22MBPS  = BIT(8),
+	CONF_HW_BIT_RATE_24MBPS  = BIT(9),
+	CONF_HW_BIT_RATE_36MBPS  = BIT(10),
+	CONF_HW_BIT_RATE_48MBPS  = BIT(11),
+	CONF_HW_BIT_RATE_54MBPS  = BIT(12),
+	CONF_HW_BIT_RATE_MCS_0   = BIT(13),
+	CONF_HW_BIT_RATE_MCS_1   = BIT(14),
+	CONF_HW_BIT_RATE_MCS_2   = BIT(15),
+	CONF_HW_BIT_RATE_MCS_3   = BIT(16),
+	CONF_HW_BIT_RATE_MCS_4   = BIT(17),
+	CONF_HW_BIT_RATE_MCS_5   = BIT(18),
+	CONF_HW_BIT_RATE_MCS_6   = BIT(19),
+	CONF_HW_BIT_RATE_MCS_7   = BIT(20)
+};
+
+enum {
+	CONF_HW_RATE_INDEX_1MBPS   = 0,
+	CONF_HW_RATE_INDEX_2MBPS   = 1,
+	CONF_HW_RATE_INDEX_5_5MBPS = 2,
+	CONF_HW_RATE_INDEX_6MBPS   = 3,
+	CONF_HW_RATE_INDEX_9MBPS   = 4,
+	CONF_HW_RATE_INDEX_11MBPS  = 5,
+	CONF_HW_RATE_INDEX_12MBPS  = 6,
+	CONF_HW_RATE_INDEX_18MBPS  = 7,
+	CONF_HW_RATE_INDEX_22MBPS  = 8,
+	CONF_HW_RATE_INDEX_24MBPS  = 9,
+	CONF_HW_RATE_INDEX_36MBPS  = 10,
+	CONF_HW_RATE_INDEX_48MBPS  = 11,
+	CONF_HW_RATE_INDEX_54MBPS  = 12,
+	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,
+};
+
+struct conf_sg_settings {
+	/*
+	 * Defines the PER threshold in PPM of the BT voice of which reaching
+	 * this value will trigger raising the priority of the BT voice by
+	 * the BT IP until next NFS sample interval time as defined in
+	 * nfs_sample_interval.
+	 *
+	 * Unit: PER value in PPM (parts per million)
+	 * #Error_packets / #Total_packets
+
+	 * Range: u32
+	 */
+	u32 per_threshold;
+
+	/*
+	 * This value is an absolute time in micro-seconds to limit the
+	 * maximum scan duration compensation while in SG
+	 */
+	u32 max_scan_compensation_time;
+
+	/* Defines the PER threshold of the BT voice of which reaching this
+	 * value will trigger raising the priority of the BT voice until next
+	 * NFS sample interval time as defined in sample_interval.
+	 *
+	 * Unit: msec
+	 * Range: 1-65000
+	 */
+	u16 nfs_sample_interval;
+
+	/*
+	 * Defines the load ratio for the BT.
+	 * The WLAN ratio is: 100 - load_ratio
+	 *
+	 * Unit: Percent
+	 * Range: 0-100
+	 */
+	u8 load_ratio;
+
+	/*
+	 * true - Co-ex is allowed to enter/exit P.S automatically and
+	 *        transparently to the host
+	 *
+	 * false - Co-ex is disallowed to enter/exit P.S and will trigger an
+	 *         event to the host to notify for the need to enter/exit P.S
+	 *         due to BT change state
+	 *
+	 */
+	u8 auto_ps_mode;
+
+	/*
+	 * This parameter defines the compensation percentage of num of probe
+	 * requests in case scan is initiated during BT voice/BT ACL
+	 * guaranteed link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 probe_req_compensation;
+
+	/*
+	 * This parameter defines the compensation percentage of scan window
+	 * size in case scan is initiated during BT voice/BT ACL Guaranteed
+	 * link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 scan_window_compensation;
+
+	/*
+	 * Defines the antenna configuration.
+	 *
+	 * Range: 0 - Single Antenna; 1 - Dual Antenna
+	 */
+	u8 antenna_config;
+
+	/*
+	 * The percent out of the Max consecutive beacon miss roaming trigger
+	 * which is the threshold for raising the priority of beacon
+	 * reception.
+	 *
+	 * Range: 1-100
+	 * N = MaxConsecutiveBeaconMiss
+	 * P = coexMaxConsecutiveBeaconMissPrecent
+	 * Threshold = MIN( N-1, round(N * P / 100))
+	 */
+	u8 beacon_miss_threshold;
+
+	/*
+	 * The RX rate threshold below which rate adaptation is assumed to be
+	 * occurring at the AP which will raise priority for ACTIVE_RX and RX
+	 * SP.
+	 *
+	 * Range: HW_BIT_RATE_*
+	 */
+	u32 rate_adaptation_threshold;
+
+	/*
+	 * The SNR above which the RX rate threshold indicating AP rate
+	 * adaptation is valid
+	 *
+	 * Range: -128 - 127
+	 */
+	s8 rate_adaptation_snr;
+};
+
+struct conf_drv_settings {
+	struct conf_sg_settings sg;
+};
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 821a7752adfe..69bc929e1859 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -46,6 +46,39 @@
 #include "wl1271_cmd.h"
 #include "wl1271_boot.h"
 
+static void wl1271_conf_init(struct wl1271 *wl)
+{
+	struct conf_drv_settings conf = {
+		.sg = {
+			.per_threshold              = 7500,
+			.max_scan_compensation_time = 120000,
+			.nfs_sample_interval        = 400,
+			.load_ratio                 = 50,
+			.auto_ps_mode               = 0,
+			.probe_req_compensation     = 170,
+			.scan_window_compensation   = 50,
+			.antenna_config             = 0,
+			.beacon_miss_threshold      = 60,
+			.rate_adaptation_threshold  = CONF_HW_BIT_RATE_12MBPS,
+			.rate_adaptation_snr        = 0
+		}
+	};
+
+	/*
+	 * This function applies the default configuration to the driver. This
+	 * function is invoked upon driver load (spi probe.)
+	 *
+	 * The configuration is stored in a run-time structure in order to
+	 * facilitate for run-time adjustment of any of the parameters. Making
+	 * changes to the configuration structure will apply the new values on
+	 * the next interface up (wl1271_op_start.)
+	 */
+
+	/* apply driver default configuration */
+	memcpy(&wl->conf, &conf, sizeof(conf));
+}
+
+
 static int wl1271_plt_init(struct wl1271 *wl)
 {
 	int ret;
@@ -1180,44 +1213,44 @@ out:
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
 	{ .bitrate = 10,
-	  .hw_value = 0x1,
-	  .hw_value_short = 0x1, },
+	  .hw_value = CONF_HW_BIT_RATE_1MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_1MBPS, },
 	{ .bitrate = 20,
-	  .hw_value = 0x2,
-	  .hw_value_short = 0x2,
+	  .hw_value = CONF_HW_BIT_RATE_2MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_2MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 55,
-	  .hw_value = 0x4,
-	  .hw_value_short = 0x4,
+	  .hw_value = CONF_HW_BIT_RATE_5_5MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 110,
-	  .hw_value = 0x20,
-	  .hw_value_short = 0x20,
+	  .hw_value = CONF_HW_BIT_RATE_11MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_11MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 60,
-	  .hw_value = 0x8,
-	  .hw_value_short = 0x8, },
+	  .hw_value = CONF_HW_BIT_RATE_6MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_6MBPS, },
 	{ .bitrate = 90,
-	  .hw_value = 0x10,
-	  .hw_value_short = 0x10, },
+	  .hw_value = CONF_HW_BIT_RATE_9MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_9MBPS, },
 	{ .bitrate = 120,
-	  .hw_value = 0x40,
-	  .hw_value_short = 0x40, },
+	  .hw_value = CONF_HW_BIT_RATE_12MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_12MBPS, },
 	{ .bitrate = 180,
-	  .hw_value = 0x80,
-	  .hw_value_short = 0x80, },
+	  .hw_value = CONF_HW_BIT_RATE_18MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_18MBPS, },
 	{ .bitrate = 240,
-	  .hw_value = 0x200,
-	  .hw_value_short = 0x200, },
+	  .hw_value = CONF_HW_BIT_RATE_24MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_24MBPS, },
 	{ .bitrate = 360,
-	 .hw_value = 0x400,
-	 .hw_value_short = 0x400, },
+	 .hw_value = CONF_HW_BIT_RATE_36MBPS,
+	 .hw_value_short = CONF_HW_BIT_RATE_36MBPS, },
 	{ .bitrate = 480,
-	  .hw_value = 0x800,
-	  .hw_value_short = 0x800, },
+	  .hw_value = CONF_HW_BIT_RATE_48MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_48MBPS, },
 	{ .bitrate = 540,
-	  .hw_value = 0x1000,
-	  .hw_value_short = 0x1000, },
+	  .hw_value = CONF_HW_BIT_RATE_54MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
 };
 
 /* can't be const, mac80211 writes to this */
@@ -1433,6 +1466,9 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 	dev_set_drvdata(&wl1271_device.dev, wl);
 
+	/* Apply default driver configuration. */
+	wl1271_conf_init(wl);
+
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_platform;
diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h
index 6af87b5573ba..1f237389d1c7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1271_reg.h
@@ -613,50 +613,6 @@ enum {
 	MAX_RADIO_BANDS = 0xFF
 };
 
-enum {
-	NO_RATE      = 0,
-	RATE_1MBPS   = 0x0A,
-	RATE_2MBPS   = 0x14,
-	RATE_5_5MBPS = 0x37,
-	RATE_6MBPS   = 0x0B,
-	RATE_9MBPS   = 0x0F,
-	RATE_11MBPS  = 0x6E,
-	RATE_12MBPS  = 0x0A,
-	RATE_18MBPS  = 0x0E,
-	RATE_22MBPS  = 0xDC,
-	RATE_24MBPS  = 0x09,
-	RATE_36MBPS  = 0x0D,
-	RATE_48MBPS  = 0x08,
-	RATE_54MBPS  = 0x0C
-};
-
-enum {
-	RATE_INDEX_1MBPS   =  0,
-	RATE_INDEX_2MBPS   =  1,
-	RATE_INDEX_5_5MBPS =  2,
-	RATE_INDEX_6MBPS   =  3,
-	RATE_INDEX_9MBPS   =  4,
-	RATE_INDEX_11MBPS  =  5,
-	RATE_INDEX_12MBPS  =  6,
-	RATE_INDEX_18MBPS  =  7,
-	RATE_INDEX_22MBPS  =  8,
-	RATE_INDEX_24MBPS  =  9,
-	RATE_INDEX_36MBPS  =  10,
-	RATE_INDEX_48MBPS  =  11,
-	RATE_INDEX_54MBPS  =  12,
-	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
-	MAX_RATE_INDEX,
-	INVALID_RATE_INDEX = MAX_RATE_INDEX,
-	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
-};
-
-enum {
-	RATE_MASK_1MBPS = 0x1,
-	RATE_MASK_2MBPS = 0x2,
-	RATE_MASK_5_5MBPS = 0x4,
-	RATE_MASK_11MBPS = 0x20,
-};
-
 #define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
 #define OFDM_RATE_BIT        BIT(6)
 #define PBCC_RATE_BIT        BIT(7)