Revert "i.MX31: framebuffer driver"

This reverts commit 86528da229a448577a8401a17c295883640d336c.

This version of the patch was tab-to-space corrupted before
application.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

4 files changed, 0 insertions, 1606 deletions

diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index e391a76ca87d..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH    0x80000000
-#define FB_SYNC_CLK_INVERT     0x40000000
-#define FB_SYNC_DATA_INVERT    0x20000000
-#define FB_SYNC_CLK_IDLE_EN    0x10000000
-#define FB_SYNC_SHARP_MODE     0x08000000
-#define FB_SYNC_SWAP_RGB       0x04000000
-#define FB_SYNC_CLK_SEL_EN     0x02000000
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:   pointer to the dma-device, used for dma-slave connection
- * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-       struct device                   *dma_dev;
-       const char                      *name;
-       const struct fb_videomode       *mode;
-       int                             num_modes;
-};
-
-#endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bf0af660df8a..6f3f3bff3832 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2125,18 +2125,6 @@ config FB_PRE_INIT_FB
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
 
-config FB_MX3
-       tristate "MX3 Framebuffer support"
-       depends on FB && MX3_IPU
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       default y
-       help
-         This is a framebuffer device for the i.MX31 LCD Controller. So
-         far only synchronous displays are supported. If you plan to use
-         an LCD display with your i.MX31 system, say Y here.
-
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 2a998ca6181d..be2b657546ef 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -132,7 +132,6 @@ obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_MX3)              += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
deleted file mode 100644
index 8a75d05f4334..000000000000
--- a/drivers/video/mx3fb.c
+++ /dev/null
@@ -1,1555 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/console.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <mach/hardware.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define MX3FB_NAME             "mx3_sdc_fb"
-
-#define MX3FB_REG_OFFSET       0xB4
-
-/* SDC Registers */
-#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
-#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
-#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
-#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
-#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
-#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
-#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
-#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
-#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
-
-/* Register bits */
-#define SDC_COM_TFT_COLOR      0x00000001UL
-#define SDC_COM_FG_EN          0x00000010UL
-#define SDC_COM_GWSEL          0x00000020UL
-#define SDC_COM_GLB_A          0x00000040UL
-#define SDC_COM_KEY_COLOR_G    0x00000080UL
-#define SDC_COM_BG_EN          0x00000200UL
-#define SDC_COM_SHARP          0x00001000UL
-
-#define SDC_V_SYNC_WIDTH_L     0x00000001UL
-
-/* Display Interface registers */
-#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
-#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
-#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
-#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
-#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
-#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
-#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
-#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
-
-/* DI_DISP_SIG_POL bits */
-#define DI_D3_VSYNC_POL_SHIFT          28
-#define DI_D3_HSYNC_POL_SHIFT          27
-#define DI_D3_DRDY_SHARP_POL_SHIFT     26
-#define DI_D3_CLK_POL_SHIFT            25
-#define DI_D3_DATA_POL_SHIFT           24
-
-/* DI_DISP_IF_CONF bits */
-#define DI_D3_CLK_IDLE_SHIFT           26
-#define DI_D3_CLK_SEL_SHIFT            25
-#define DI_D3_DATAMSK_SHIFT            24
-
-enum ipu_panel {
-       IPU_PANEL_SHARP_TFT,
-       IPU_PANEL_TFT,
-};
-
-struct ipu_di_signal_cfg {
-       unsigned datamask_en:1;
-       unsigned clksel_en:1;
-       unsigned clkidle_en:1;
-       unsigned data_pol:1;    /* true = inverted */
-       unsigned clk_pol:1;     /* true = rising edge */
-       unsigned enable_pol:1;
-       unsigned Hsync_pol:1;   /* true = active high */
-       unsigned Vsync_pol:1;
-};
-
-static const struct fb_videomode mx3fb_modedb[] = {
-       {
-               /* 240x320 @ 60 Hz */
-               .name           = "Sharp-QVGA",
-               .refresh        = 60,
-               .xres           = 240,
-               .yres           = 320,
-               .pixclock       = 185925,
-               .left_margin    = 9,
-               .right_margin   = 16,
-               .upper_margin   = 7,
-               .lower_margin   = 9,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-                                 FB_SYNC_CLK_IDLE_EN,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* 240x33 @ 60 Hz */
-               .name           = "Sharp-CLI",
-               .refresh        = 60,
-               .xres           = 240,
-               .yres           = 33,
-               .pixclock       = 185925,
-               .left_margin    = 9,
-               .right_margin   = 16,
-               .upper_margin   = 7,
-               .lower_margin   = 9 + 287,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
-                                 FB_SYNC_CLK_IDLE_EN,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* 640x480 @ 60 Hz */
-               .name           = "NEC-VGA",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 38255,
-               .left_margin    = 144,
-               .right_margin   = 0,
-               .upper_margin   = 34,
-               .lower_margin   = 40,
-               .hsync_len      = 1,
-               .vsync_len      = 1,
-               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* NTSC TV output */
-               .name           = "TV-NTSC",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 37538,
-               .left_margin    = 38,
-               .right_margin   = 858 - 640 - 38 - 3,
-               .upper_margin   = 36,
-               .lower_margin   = 518 - 480 - 36 - 1,
-               .hsync_len      = 3,
-               .vsync_len      = 1,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* PAL TV output */
-               .name           = "TV-PAL",
-               .refresh        = 50,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 37538,
-               .left_margin    = 38,
-               .right_margin   = 960 - 640 - 38 - 32,
-               .upper_margin   = 32,
-               .lower_margin   = 555 - 480 - 32 - 3,
-               .hsync_len      = 32,
-               .vsync_len      = 3,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       }, {
-               /* TV output VGA mode, 640x480 @ 65 Hz */
-               .name           = "TV-VGA",
-               .refresh        = 60,
-               .xres           = 640,
-               .yres           = 480,
-               .pixclock       = 40574,
-               .left_margin    = 35,
-               .right_margin   = 45,
-               .upper_margin   = 9,
-               .lower_margin   = 1,
-               .hsync_len      = 46,
-               .vsync_len      = 5,
-               .sync           = 0,
-               .vmode          = FB_VMODE_NONINTERLACED,
-               .flag           = 0,
-       },
-};
-
-struct mx3fb_data {
-       struct fb_info          *fbi;
-       int                     backlight_level;
-       void __iomem            *reg_base;
-       spinlock_t              lock;
-       struct device           *dev;
-
-       uint32_t                h_start_width;
-       uint32_t                v_start_width;
-};
-
-struct dma_chan_request {
-       struct mx3fb_data       *mx3fb;
-       enum ipu_channel        id;
-};
-
-/* MX3 specific framebuffer information. */
-struct mx3fb_info {
-       int                             blank;
-       enum ipu_channel                ipu_ch;
-       uint32_t                        cur_ipu_buf;
-
-       u32                             pseudo_palette[16];
-
-       struct completion               flip_cmpl;
-       struct mutex                    mutex;  /* Protects fb-ops */
-       struct mx3fb_data               *mx3fb;
-       struct idmac_channel            *idmac_channel;
-       struct dma_async_tx_descriptor  *txd;
-       dma_cookie_t                    cookie;
-       struct scatterlist              sg[2];
-
-       u32                             sync;   /* preserve var->sync flags */
-};
-
-static void mx3fb_dma_done(void *);
-
-/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
-static const char *fb_mode;
-static unsigned long default_bpp = 16;
-
-static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
-{
-       return __raw_readl(mx3fb->reg_base + reg);
-}
-
-static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
-{
-       __raw_writel(value, mx3fb->reg_base + reg);
-}
-
-static const uint32_t di_mappings[] = {
-       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
-       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
-       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
-       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
-};
-
-static void sdc_fb_init(struct mx3fb_info *fbi)
-{
-       struct mx3fb_data *mx3fb = fbi->mx3fb;
-       uint32_t reg;
-
-       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-
-       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
-}
-
-/* Returns enabled flag before uninit */
-static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
-{
-       struct mx3fb_data *mx3fb = fbi->mx3fb;
-       uint32_t reg;
-
-       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-
-       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
-
-       return reg & SDC_COM_BG_EN;
-}
-
-static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
-{
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-       struct dma_chan *dma_chan = &ichan->dma_chan;
-       unsigned long flags;
-       dma_cookie_t cookie;
-
-       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
-               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
-
-       /* This enables the channel */
-       if (mx3_fbi->cookie < 0) {
-               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
-                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
-               if (!mx3_fbi->txd) {
-                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
-                               dma_chan->chan_id);
-                       return;
-               }
-
-               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
-               mx3_fbi->txd->callback          = mx3fb_dma_done;
-
-               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
-               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
-                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-       } else {
-               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
-                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
-                               dma_chan->chan_id);
-                       return;
-               }
-
-               /* Just re-activate the same buffer */
-               dma_async_issue_pending(dma_chan);
-               cookie = mx3_fbi->cookie;
-               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
-                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
-       }
-
-       if (cookie >= 0) {
-               spin_lock_irqsave(&mx3fb->lock, flags);
-               sdc_fb_init(mx3_fbi);
-               mx3_fbi->cookie = cookie;
-               spin_unlock_irqrestore(&mx3fb->lock, flags);
-       }
-
-       /*
-        * Attention! Without this msleep the channel keeps generating
-        * interrupts. Next sdc_set_brightness() is going to be called
-        * from mx3fb_blank().
-        */
-       msleep(2);
-}
-
-static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
-{
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       uint32_t enabled;
-       unsigned long flags;
-
-       spin_lock_irqsave(&mx3fb->lock, flags);
-
-       enabled = sdc_fb_uninit(mx3_fbi);
-
-       spin_unlock_irqrestore(&mx3fb->lock, flags);
-
-       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
-       mx3_fbi->txd = NULL;
-       mx3_fbi->cookie = -EINVAL;
-}
-
-/**
- * sdc_set_window_pos() - set window position of the respective plane.
- * @mx3fb:     mx3fb context.
- * @channel:   IPU DMAC channel ID.
- * @x_pos:     X coordinate relative to the top left corner to place window at.
- * @y_pos:     Y coordinate relative to the top left corner to place window at.
- * @return:    0 on success or negative error code on failure.
- */
-static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-                             int16_t x_pos, int16_t y_pos)
-{
-       x_pos += mx3fb->h_start_width;
-       y_pos += mx3fb->v_start_width;
-
-       if (channel != IDMAC_SDC_0)
-               return -EINVAL;
-
-       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
-       return 0;
-}
-
-/**
- * sdc_init_panel() - initialize a synchronous LCD panel.
- * @mx3fb:             mx3fb context.
- * @panel:             panel type.
- * @pixel_clk:         desired pixel clock frequency in Hz.
- * @width:             width of panel in pixels.
- * @height:            height of panel in pixels.
- * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
- * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
- *                     and the start of valid data.
- * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
- * @h_end_width:       number of pixel clocks between the end of valid data
- *                     and the HSYNC signal for next line.
- * @v_start_width:     number of lines between the VSYNC signal pulse and the
- *                     start of valid data.
- * @v_sync_width:      width of the VSYNC signal in units of lines
- * @v_end_width:       number of lines between the end of valid data and the
- *                     VSYNC signal for next frame.
- * @sig:               bitfield of signal polarities for LCD interface.
- * @return:            0 on success or negative error code on failure.
- */
-static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
-                         uint32_t pixel_clk,
-                         uint16_t width, uint16_t height,
-                         enum pixel_fmt pixel_fmt,
-                         uint16_t h_start_width, uint16_t h_sync_width,
-                         uint16_t h_end_width, uint16_t v_start_width,
-                         uint16_t v_sync_width, uint16_t v_end_width,
-                         struct ipu_di_signal_cfg sig)
-{
-       unsigned long lock_flags;
-       uint32_t reg;
-       uint32_t old_conf;
-       uint32_t div;
-       struct clk *ipu_clk;
-
-       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
-
-       if (v_sync_width == 0 || h_sync_width == 0)
-               return -EINVAL;
-
-       /* Init panel size and blanking periods */
-       reg = ((uint32_t) (h_sync_width - 1) << 26) |
-               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
-       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
-
-#ifdef DEBUG
-       printk(KERN_CONT " hor_conf %x,", reg);
-#endif
-
-       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
-           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
-       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
-
-#ifdef DEBUG
-       printk(KERN_CONT " ver_conf %x\n", reg);
-#endif
-
-       mx3fb->h_start_width = h_start_width;
-       mx3fb->v_start_width = v_start_width;
-
-       switch (panel) {
-       case IPU_PANEL_SHARP_TFT:
-               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
-               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
-               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
-               break;
-       case IPU_PANEL_TFT:
-               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
-               break;
-       default:
-               return -EINVAL;
-       }
-
-       /* Init clocking */
-
-       /*
-        * Calculate divider: fractional part is 4 bits so simply multiple by
-        * 24 to get fractional part, as long as we stay under ~250MHz and on
-        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
-        */
-       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
-
-       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
-       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
-       clk_put(ipu_clk);
-
-       if (div < 0x40) {       /* Divider less than 4 */
-               dev_dbg(mx3fb->dev,
-                       "InitPanel() - Pixel clock divider less than 4\n");
-               div = 0x40;
-       }
-
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-       /*
-        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
-        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
-        * debug. DISP3_IF_CLK_UP_WR is 0
-        */
-       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
-
-       /* DI settings */
-       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
-       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
-           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
-           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
-       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
-
-       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
-       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
-           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
-           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
-           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
-           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
-       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
-
-       switch (pixel_fmt) {
-       case IPU_PIX_FMT_RGB24:
-               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       case IPU_PIX_FMT_RGB666:
-               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       case IPU_PIX_FMT_BGR666:
-               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       default:
-               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
-               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
-               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
-                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
-               break;
-       }
-
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
-       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
-       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
-               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
-
-       return 0;
-}
-
-/**
- * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
- * @mx3fb:     mx3fb context.
- * @channel:   IPU DMAC channel ID.
- * @enable:    boolean to enable or disable color keyl.
- * @color_key: 24-bit RGB color to use as transparent color key.
- * @return:    0 on success or negative error code on failure.
- */
-static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
-                            bool enable, uint32_t color_key)
-{
-       uint32_t reg, sdc_conf;
-       unsigned long lock_flags;
-
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-       if (channel == IDMAC_SDC_0)
-               sdc_conf &= ~SDC_COM_GWSEL;
-       else
-               sdc_conf |= SDC_COM_GWSEL;
-
-       if (enable) {
-               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
-               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
-                            SDC_GW_CTRL);
-
-               sdc_conf |= SDC_COM_KEY_COLOR_G;
-       } else {
-               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
-       }
-       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
-
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-       return 0;
-}
-
-/**
- * sdc_set_global_alpha() - set global alpha blending modes.
- * @mx3fb:     mx3fb context.
- * @enable:    boolean to enable or disable global alpha blending. If disabled,
- *             per pixel blending is used.
- * @alpha:     global alpha value.
- * @return:    0 on success or negative error code on failure.
- */
-static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
-{
-       uint32_t reg;
-       unsigned long lock_flags;
-
-       spin_lock_irqsave(&mx3fb->lock, lock_flags);
-
-       if (enable) {
-               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
-               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
-
-               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
-       } else {
-               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
-               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
-       }
-
-       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
-
-       return 0;
-}
-
-static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
-{
-       /* This might be board-specific */
-       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
-       return;
-}
-
-static uint32_t bpp_to_pixfmt(int bpp)
-{
-       uint32_t pixfmt = 0;
-       switch (bpp) {
-       case 24:
-               pixfmt = IPU_PIX_FMT_BGR24;
-               break;
-       case 32:
-               pixfmt = IPU_PIX_FMT_BGR32;
-               break;
-       case 16:
-               pixfmt = IPU_PIX_FMT_RGB565;
-               break;
-       }
-       return pixfmt;
-}
-
-static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi);
-static int mx3fb_unmap_video_memory(struct fb_info *fbi);
-
-/**
- * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
- * @info:      framebuffer information pointer
- * @return:    0 on success or negative error code on failure.
- */
-static int mx3fb_set_fix(struct fb_info *fbi)
-{
-       struct fb_fix_screeninfo *fix = &fbi->fix;
-       struct fb_var_screeninfo *var = &fbi->var;
-
-       strncpy(fix->id, "DISP3 BG", 8);
-
-       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
-
-       fix->type = FB_TYPE_PACKED_PIXELS;
-       fix->accel = FB_ACCEL_NONE;
-       fix->visual = FB_VISUAL_TRUECOLOR;
-       fix->xpanstep = 1;
-       fix->ypanstep = 1;
-
-       return 0;
-}
-
-static void mx3fb_dma_done(void *arg)
-{
-       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
-       struct dma_chan *chan = tx_desc->txd.chan;
-       struct idmac_channel *ichannel = to_idmac_chan(chan);
-       struct mx3fb_data *mx3fb = ichannel->client;
-       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
-
-       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
-
-       /* We only need one interrupt, it will be re-enabled as needed */
-       disable_irq(ichannel->eof_irq);
-
-       complete(&mx3_fbi->flip_cmpl);
-}
-
-/**
- * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi:       framebuffer information pointer.
- * @return:    0 on success or negative error code on failure.
- */
-static int mx3fb_set_par(struct fb_info *fbi)
-{
-       u32 mem_len;
-       struct ipu_di_signal_cfg sig_cfg;
-       enum ipu_panel mode = IPU_PANEL_TFT;
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
-       struct idmac_video_param *video = &ichan->params.video;
-       struct scatterlist *sg = mx3_fbi->sg;
-       size_t screen_size;
-
-       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
-
-       mutex_lock(&mx3_fbi->mutex);
-
-       /* Total cleanup */
-       if (mx3_fbi->txd)
-               sdc_disable_channel(mx3_fbi);
-
-       mx3fb_set_fix(fbi);
-
-       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
-       if (mem_len > fbi->fix.smem_len) {
-               if (fbi->fix.smem_start)
-                       mx3fb_unmap_video_memory(fbi);
-
-               fbi->fix.smem_len = mem_len;
-               if (mx3fb_map_video_memory(fbi) < 0) {
-                       mutex_unlock(&mx3_fbi->mutex);
-                       return -ENOMEM;
-               }
-       }
-
-       screen_size = fbi->fix.line_length * fbi->var.yres;
-
-       sg_init_table(&sg[0], 1);
-       sg_init_table(&sg[1], 1);
-
-       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
-       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
-                   fbi->fix.smem_len,
-                   offset_in_page(fbi->screen_base));
-
-       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
-               memset(&sig_cfg, 0, sizeof(sig_cfg));
-               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
-                       sig_cfg.Hsync_pol = true;
-               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
-                       sig_cfg.Vsync_pol = true;
-               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
-                       sig_cfg.clk_pol = true;
-               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
-                       sig_cfg.data_pol = true;
-               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
-                       sig_cfg.enable_pol = true;
-               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
-                       sig_cfg.clkidle_en = true;
-               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
-                       sig_cfg.clksel_en = true;
-               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
-                       mode = IPU_PANEL_SHARP_TFT;
-
-               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
-                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
-
-               if (sdc_init_panel(mx3fb, mode,
-                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
-                                  fbi->var.xres, fbi->var.yres,
-                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
-                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
-                                  fbi->var.left_margin,
-                                  fbi->var.hsync_len,
-                                  fbi->var.right_margin +
-                                  fbi->var.hsync_len,
-                                  fbi->var.upper_margin,
-                                  fbi->var.vsync_len,
-                                  fbi->var.lower_margin +
-                                  fbi->var.vsync_len, sig_cfg) != 0) {
-                       mutex_unlock(&mx3_fbi->mutex);
-                       dev_err(fbi->device,
-                               "mx3fb: Error initializing panel.\n");
-                       return -EINVAL;
-               }
-       }
-
-       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
-
-       mx3_fbi->cur_ipu_buf    = 0;
-
-       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
-       video->out_width        = fbi->var.xres;
-       video->out_height       = fbi->var.yres;
-       video->out_stride       = fbi->var.xres_virtual;
-
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
-               sdc_enable_channel(mx3_fbi);
-
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return 0;
-}
-
-/**
- * mx3fb_check_var() - check and adjust framebuffer variable parameters.
- * @var:       framebuffer variable parameters
- * @fbi:       framebuffer information pointer
- */
-static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
-{
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 vtotal;
-       u32 htotal;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       if (var->xres_virtual < var->xres)
-               var->xres_virtual = var->xres;
-       if (var->yres_virtual < var->yres)
-               var->yres_virtual = var->yres;
-
-       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
-           (var->bits_per_pixel != 16))
-               var->bits_per_pixel = default_bpp;
-
-       switch (var->bits_per_pixel) {
-       case 16:
-               var->red.length = 5;
-               var->red.offset = 11;
-               var->red.msb_right = 0;
-
-               var->green.length = 6;
-               var->green.offset = 5;
-               var->green.msb_right = 0;
-
-               var->blue.length = 5;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 0;
-               var->transp.offset = 0;
-               var->transp.msb_right = 0;
-               break;
-       case 24:
-               var->red.length = 8;
-               var->red.offset = 16;
-               var->red.msb_right = 0;
-
-               var->green.length = 8;
-               var->green.offset = 8;
-               var->green.msb_right = 0;
-
-               var->blue.length = 8;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 0;
-               var->transp.offset = 0;
-               var->transp.msb_right = 0;
-               break;
-       case 32:
-               var->red.length = 8;
-               var->red.offset = 16;
-               var->red.msb_right = 0;
-
-               var->green.length = 8;
-               var->green.offset = 8;
-               var->green.msb_right = 0;
-
-               var->blue.length = 8;
-               var->blue.offset = 0;
-               var->blue.msb_right = 0;
-
-               var->transp.length = 8;
-               var->transp.offset = 24;
-               var->transp.msb_right = 0;
-               break;
-       }
-
-       if (var->pixclock < 1000) {
-               htotal = var->xres + var->right_margin + var->hsync_len +
-                   var->left_margin;
-               vtotal = var->yres + var->lower_margin + var->vsync_len +
-                   var->upper_margin;
-               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
-               var->pixclock = KHZ2PICOS(var->pixclock);
-               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
-                       var->pixclock);
-       }
-
-       var->height = -1;
-       var->width = -1;
-       var->grayscale = 0;
-
-       /* Preserve sync flags */
-       var->sync |= mx3_fbi->sync;
-       mx3_fbi->sync |= var->sync;
-
-       return 0;
-}
-
-static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
-{
-       chan &= 0xffff;
-       chan >>= 16 - bf->length;
-       return chan << bf->offset;
-}
-
-static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
-                          unsigned int green, unsigned int blue,
-                          unsigned int trans, struct fb_info *fbi)
-{
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 val;
-       int ret = 1;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       mutex_lock(&mx3_fbi->mutex);
-       /*
-        * If greyscale is true, then we convert the RGB value
-        * to greyscale no matter what visual we are using.
-        */
-       if (fbi->var.grayscale)
-               red = green = blue = (19595 * red + 38470 * green +
-                                     7471 * blue) >> 16;
-       switch (fbi->fix.visual) {
-       case FB_VISUAL_TRUECOLOR:
-               /*
-                * 16-bit True Colour.  We encode the RGB value
-                * according to the RGB bitfield information.
-                */
-               if (regno < 16) {
-                       u32 *pal = fbi->pseudo_palette;
-
-                       val = chan_to_field(red, &fbi->var.red);
-                       val |= chan_to_field(green, &fbi->var.green);
-                       val |= chan_to_field(blue, &fbi->var.blue);
-
-                       pal[regno] = val;
-
-                       ret = 0;
-               }
-               break;
-
-       case FB_VISUAL_STATIC_PSEUDOCOLOR:
-       case FB_VISUAL_PSEUDOCOLOR:
-               break;
-       }
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return ret;
-}
-
-/**
- * mx3fb_blank() - blank the display.
- */
-static int mx3fb_blank(int blank, struct fb_info *fbi)
-{
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
-
-       dev_dbg(fbi->device, "%s\n", __func__);
-
-       dev_dbg(fbi->device, "blank = %d\n", blank);
-
-       if (mx3_fbi->blank == blank)
-               return 0;
-
-       mutex_lock(&mx3_fbi->mutex);
-       mx3_fbi->blank = blank;
-
-       switch (blank) {
-       case FB_BLANK_POWERDOWN:
-       case FB_BLANK_VSYNC_SUSPEND:
-       case FB_BLANK_HSYNC_SUSPEND:
-       case FB_BLANK_NORMAL:
-               sdc_disable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, 0);
-               break;
-       case FB_BLANK_UNBLANK:
-               sdc_enable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
-               break;
-       }
-       mutex_unlock(&mx3_fbi->mutex);
-
-       return 0;
-}
-
-/**
- * mx3fb_pan_display() - pan or wrap the display
- * @var:       variable screen buffer information.
- * @info:      framebuffer information pointer.
- *
- * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
- */
-static int mx3fb_pan_display(struct fb_var_screeninfo *var,
-                            struct fb_info *fbi)
-{
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       u32 y_bottom;
-       unsigned long base;
-       off_t offset;
-       dma_cookie_t cookie;
-       struct scatterlist *sg = mx3_fbi->sg;
-       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
-       struct dma_async_tx_descriptor *txd;
-       int ret;
-
-       dev_dbg(fbi->device, "%s [%c]\n", __func__,
-               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
-
-       if (var->xoffset > 0) {
-               dev_dbg(fbi->device, "x panning not supported\n");
-               return -EINVAL;
-       }
-
-       if (fbi->var.xoffset == var->xoffset &&
-           fbi->var.yoffset == var->yoffset)
-               return 0;       /* No change, do nothing */
-
-       y_bottom = var->yoffset;
-
-       if (!(var->vmode & FB_VMODE_YWRAP))
-               y_bottom += var->yres;
-
-       if (y_bottom > fbi->var.yres_virtual)
-               return -EINVAL;
-
-       mutex_lock(&mx3_fbi->mutex);
-
-       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
-               (var->bits_per_pixel / 8);
-       base = fbi->fix.smem_start + offset;
-
-       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
-               mx3_fbi->cur_ipu_buf, base);
-
-       /*
-        * We enable the End of Frame interrupt, which will free a tx-descriptor,
-        * which we will need for the next device_prep_slave_sg(). The
-        * IRQ-handler will disable the IRQ again.
-        */
-       init_completion(&mx3_fbi->flip_cmpl);
-       enable_irq(mx3_fbi->idmac_channel->eof_irq);
-
-       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
-       if (ret <= 0) {
-               mutex_unlock(&mx3_fbi->mutex);
-               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
-                        "user interrupt" : "timeout");
-               return ret ? : -ETIMEDOUT;
-       }
-
-       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
-
-       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
-       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
-                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
-                   offset_in_page(fbi->screen_base + offset));
-
-       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
-               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
-       if (!txd) {
-               dev_err(fbi->device,
-                       "Error preparing a DMA transaction descriptor.\n");
-               mutex_unlock(&mx3_fbi->mutex);
-               return -EIO;
-       }
-
-       txd->callback_param     = txd;
-       txd->callback           = mx3fb_dma_done;
-
-       /*
-        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
-        * should switch to another buffer
-        */
-       cookie = txd->tx_submit(txd);
-       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
-       if (cookie < 0) {
-               dev_err(fbi->device,
-                       "Error updating SDC buf %d to address=0x%08lX\n",
-                       mx3_fbi->cur_ipu_buf, base);
-               mutex_unlock(&mx3_fbi->mutex);
-               return -EIO;
-       }
-
-       if (mx3_fbi->txd)
-               async_tx_ack(mx3_fbi->txd);
-       mx3_fbi->txd = txd;
-
-       fbi->var.xoffset = var->xoffset;
-       fbi->var.yoffset = var->yoffset;
-
-       if (var->vmode & FB_VMODE_YWRAP)
-               fbi->var.vmode |= FB_VMODE_YWRAP;
-       else
-               fbi->var.vmode &= ~FB_VMODE_YWRAP;
-
-       mutex_unlock(&mx3_fbi->mutex);
-
-       dev_dbg(fbi->device, "Update complete\n");
-
-       return 0;
-}
-
-/*
- * This structure contains the pointers to the control functions that are
- * invoked by the core framebuffer driver to perform operations like
- * blitting, rectangle filling, copy regions and cursor definition.
- */
-static struct fb_ops mx3fb_ops = {
-       .owner = THIS_MODULE,
-       .fb_set_par = mx3fb_set_par,
-       .fb_check_var = mx3fb_check_var,
-       .fb_setcolreg = mx3fb_setcolreg,
-       .fb_pan_display = mx3fb_pan_display,
-       .fb_fillrect = cfb_fillrect,
-       .fb_copyarea = cfb_copyarea,
-       .fb_imageblit = cfb_imageblit,
-       .fb_blank = mx3fb_blank,
-};
-
-#ifdef CONFIG_PM
-/*
- * Power management hooks.      Note that we won't be called from IRQ context,
- * unlike the blank functions above, so we may sleep.
- */
-
-/*
- * Suspends the framebuffer and blanks the screen. Power management support
- */
-static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
-{
-       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
-
-       acquire_console_sem();
-       fb_set_suspend(drv_data->fbi, 1);
-       release_console_sem();
-
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-               sdc_disable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, 0);
-
-       }
-       return 0;
-}
-
-/*
- * Resumes the framebuffer and unblanks the screen. Power management support
- */
-static int mx3fb_resume(struct platform_device *pdev)
-{
-       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
-       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
-
-       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
-               sdc_enable_channel(mx3_fbi);
-               sdc_set_brightness(mx3fb, drv_data->backlight_level);
-       }
-
-       acquire_console_sem();
-       fb_set_suspend(drv_data->fbi, 0);
-       release_console_sem();
-
-       return 0;
-}
-#else
-#define mx3fb_suspend   NULL
-#define mx3fb_resume    NULL
-#endif
-
-/*
- * Main framebuffer functions
- */
-
-/**
- * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
- * @fbi:       framebuffer information pointer
- * @return:    Error code indicating success or failure
- *
- * This buffer is remapped into a non-cached, non-buffered, memory region to
- * allow palette and pixel writes to occur without flushing the cache. Once this
- * area is remapped, all virtual memory access to the video memory should occur
- * at the new region.
- */
-static int mx3fb_map_video_memory(struct fb_info *fbi)
-{
-       int retval = 0;
-       dma_addr_t addr;
-
-       fbi->screen_base = dma_alloc_writecombine(fbi->device,
-                                                 fbi->fix.smem_len,
-                                                 &addr, GFP_DMA);
-
-       if (!fbi->screen_base) {
-               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
-                       fbi->fix.smem_len);
-               retval = -EBUSY;
-               goto err0;
-       }
-
-       fbi->fix.smem_start = addr;
-
-       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
-               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
-
-       fbi->screen_size = fbi->fix.smem_len;
-
-       /* Clear the screen */
-       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
-
-       return 0;
-
-err0:
-       fbi->fix.smem_len = 0;
-       fbi->fix.smem_start = 0;
-       fbi->screen_base = NULL;
-       return retval;
-}
-
-/**
- * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
- * @fbi:       framebuffer information pointer
- * @return:    error code indicating success or failure
- */
-static int mx3fb_unmap_video_memory(struct fb_info *fbi)
-{
-       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
-                             fbi->screen_base, fbi->fix.smem_start);
-
-       fbi->screen_base = 0;
-       fbi->fix.smem_start = 0;
-       fbi->fix.smem_len = 0;
-       return 0;
-}
-
-/**
- * mx3fb_init_fbinfo() - initialize framebuffer information object.
- * @return:    initialized framebuffer structure.
- */
-static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
-{
-       struct fb_info *fbi;
-       struct mx3fb_info *mx3fbi;
-       int ret;
-
-       /* Allocate sufficient memory for the fb structure */
-       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
-       if (!fbi)
-               return NULL;
-
-       mx3fbi                  = fbi->par;
-       mx3fbi->cookie          = -EINVAL;
-       mx3fbi->cur_ipu_buf     = 0;
-
-       fbi->var.activate       = FB_ACTIVATE_NOW;
-
-       fbi->fbops              = ops;
-       fbi->flags              = FBINFO_FLAG_DEFAULT;
-       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
-
-       mutex_init(&mx3fbi->mutex);
-
-       /* Allocate colormap */
-       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
-       if (ret < 0) {
-               framebuffer_release(fbi);
-               return NULL;
-       }
-
-       return fbi;
-}
-
-static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
-{
-       struct device *dev = mx3fb->dev;
-       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
-       const char *name = mx3fb_pdata->name;
-       unsigned int irq;
-       struct fb_info *fbi;
-       struct mx3fb_info *mx3fbi;
-       const struct fb_videomode *mode;
-       int ret, num_modes;
-
-       ichan->client = mx3fb;
-       irq = ichan->eof_irq;
-
-       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
-               return -EINVAL;
-
-       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
-       if (!fbi)
-               return -ENOMEM;
-
-       if (!fb_mode)
-               fb_mode = name;
-
-       if (!fb_mode) {
-               ret = -EINVAL;
-               goto emode;
-       }
-
-       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
-               mode = mx3fb_pdata->mode;
-               num_modes = mx3fb_pdata->num_modes;
-       } else {
-               mode = mx3fb_modedb;
-               num_modes = ARRAY_SIZE(mx3fb_modedb);
-       }
-
-       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
-                         num_modes, NULL, default_bpp)) {
-               ret = -EBUSY;
-               goto emode;
-       }
-
-       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
-
-       /* Default Y virtual size is 2x panel size */
-       fbi->var.yres_virtual = fbi->var.yres * 2;
-
-       mx3fb->fbi = fbi;
-
-       /* set Display Interface clock period */
-       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
-       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
-
-       sdc_set_brightness(mx3fb, 255);
-       sdc_set_global_alpha(mx3fb, true, 0xFF);
-       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
-
-       mx3fbi                  = fbi->par;
-       mx3fbi->idmac_channel   = ichan;
-       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
-       mx3fbi->mx3fb           = mx3fb;
-       mx3fbi->blank           = FB_BLANK_NORMAL;
-
-       init_completion(&mx3fbi->flip_cmpl);
-       disable_irq(ichan->eof_irq);
-       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
-       ret = mx3fb_set_par(fbi);
-       if (ret < 0)
-               goto esetpar;
-
-       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
-
-       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
-
-       ret = register_framebuffer(fbi);
-       if (ret < 0)
-               goto erfb;
-
-       return 0;
-
-erfb:
-esetpar:
-emode:
-       fb_dealloc_cmap(&fbi->cmap);
-       framebuffer_release(fbi);
-
-       return ret;
-}
-
-static bool chan_filter(struct dma_chan *chan, void *arg)
-{
-       struct dma_chan_request *rq = arg;
-       struct device *dev;
-       struct mx3fb_platform_data *mx3fb_pdata;
-
-       if (!rq)
-               return false;
-
-       dev = rq->mx3fb->dev;
-       mx3fb_pdata = dev->platform_data;
-
-       return rq->id == chan->chan_id &&
-               mx3fb_pdata->dma_dev == chan->device->dev;
-}
-
-static void release_fbi(struct fb_info *fbi)
-{
-       mx3fb_unmap_video_memory(fbi);
-
-       fb_dealloc_cmap(&fbi->cmap);
-
-       unregister_framebuffer(fbi);
-       framebuffer_release(fbi);
-}
-
-static int mx3fb_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       int ret;
-       struct resource *sdc_reg;
-       struct mx3fb_data *mx3fb;
-       dma_cap_mask_t mask;
-       struct dma_chan *chan;
-       struct dma_chan_request rq;
-
-       /*
-        * Display Interface (DI) and Synchronous Display Controller (SDC)
-        * registers
-        */
-       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!sdc_reg)
-               return -EINVAL;
-
-       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
-       if (!mx3fb)
-               return -ENOMEM;
-
-       spin_lock_init(&mx3fb->lock);
-
-       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
-       if (!mx3fb->reg_base) {
-               ret = -ENOMEM;
-               goto eremap;
-       }
-
-       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
-                mx3fb->reg_base);
-
-       /* IDMAC interface */
-       dmaengine_get();
-
-       mx3fb->dev = dev;
-       platform_set_drvdata(pdev, mx3fb);
-
-       rq.mx3fb = mx3fb;
-
-       dma_cap_zero(mask);
-       dma_cap_set(DMA_SLAVE, mask);
-       dma_cap_set(DMA_PRIVATE, mask);
-       rq.id = IDMAC_SDC_0;
-       chan = dma_request_channel(mask, chan_filter, &rq);
-       if (!chan) {
-               ret = -EBUSY;
-               goto ersdc0;
-       }
-
-       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
-       if (ret < 0)
-               goto eisdc0;
-
-       mx3fb->backlight_level = 255;
-
-       return 0;
-
-eisdc0:
-       dma_release_channel(chan);
-ersdc0:
-       dmaengine_put();
-       iounmap(mx3fb->reg_base);
-eremap:
-       kfree(mx3fb);
-       dev_err(dev, "mx3fb: failed to register fb\n");
-       return ret;
-}
-
-static int mx3fb_remove(struct platform_device *dev)
-{
-       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
-       struct fb_info *fbi = mx3fb->fbi;
-       struct mx3fb_info *mx3_fbi = fbi->par;
-       struct dma_chan *chan;
-
-       chan = &mx3_fbi->idmac_channel->dma_chan;
-       release_fbi(fbi);
-
-       dma_release_channel(chan);
-       dmaengine_put();
-
-       iounmap(mx3fb->reg_base);
-       kfree(mx3fb);
-       return 0;
-}
-
-static struct platform_driver mx3fb_driver = {
-       .driver = {
-                  .name = MX3FB_NAME,
-       },
-       .probe = mx3fb_probe,
-       .remove = mx3fb_remove,
-       .suspend = mx3fb_suspend,
-       .resume = mx3fb_resume,
-};
-
-/*
- * Parse user specified options (`video=mx3fb:')
- * example:
- *     video=mx3fb:bpp=16
- */
-static int mx3fb_setup(void)
-{
-#ifndef MODULE
-       char *opt, *options = NULL;
-
-       if (fb_get_options("mx3fb", &options))
-               return -ENODEV;
-
-       if (!options || !*options)
-               return 0;
-
-       while ((opt = strsep(&options, ",")) != NULL) {
-               if (!*opt)
-                       continue;
-               if (!strncmp(opt, "bpp=", 4))
-                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
-               else
-                       fb_mode = opt;
-       }
-#endif
-
-       return 0;
-}
-
-static int __init mx3fb_init(void)
-{
-       int ret = mx3fb_setup();
-
-       if (ret < 0)
-               return ret;
-
-       ret = platform_driver_register(&mx3fb_driver);
-       return ret;
-}
-
-static void __exit mx3fb_exit(void)
-{
-       platform_driver_unregister(&mx3fb_driver);
-}
-
-module_init(mx3fb_init);
-module_exit(mx3fb_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-MODULE_DESCRIPTION("MX3 framebuffer driver");
-MODULE_ALIAS("platform:" MX3FB_NAME);
-MODULE_LICENSE("GPL v2");