diff options
| author | Rui Miguel Silva <rui.silva@linaro.org> | 2018-07-03 10:08:02 -0400 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2018-07-27 12:37:52 -0400 |
| commit | 1434e3b34816bede31400f9d2bc0c8bc6850459a (patch) | |
| tree | c313f55188472aac5f1478d6cc0c9983faa28ede | |
| parent | aab7ed1c392703604fbdc5bd5005dfb61a0b32f9 (diff) | |
media: ov2680: dt: Add bindings for OV2680
Add device tree binding documentation for the OV2680 camera sensor.
[Sakari Ailus: Squash MAINTAINERS entry from Rui]
CC: devicetree@vger.kernel.org
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| -rw-r--r-- | Documentation/devicetree/bindings/media/i2c/ov2680.txt | 46 | ||||
| -rw-r--r-- | MAINTAINERS | 8 |
2 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt new file mode 100644 index 000000000000..11e925ed9dad --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.txt @@ -0,0 +1,46 @@ +* Omnivision OV2680 MIPI CSI-2 sensor + +Required Properties: +- compatible: should be "ovti,ov2680". +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". +- DOVDD-supply: Digital I/O voltage supply. +- DVDD-supply: Digital core voltage supply. +- AVDD-supply: Analog voltage supply. + +Optional Properties: +- reset-gpios: reference to the GPIO connected to the powerdown/reset pin, + if any. This is an active low signal to the OV2680. + +The device node must contain one 'port' child node for its digital output +video port, and this port must have a single endpoint in accordance with + the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Endpoint node required properties for CSI-2 connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- clock-lanes: should be set to <0> (clock lane on hardware lane 0). +- data-lanes: should be set to <1> (one CSI-2 lane supported). + +Example: + +&i2c2 { + ov2680: camera-sensor@36 { + compatible = "ovti,ov2680"; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index a13344d6149a..ab739894d257 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10490,6 +10490,14 @@ T: git git://linuxtv.org/media_tree.git S: Maintained F: drivers/media/i2c/ov13858.c +OMNIVISION OV2680 SENSOR DRIVER +M: Rui Miguel Silva <rmfrfs@gmail.com> +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: drivers/media/i2c/ov2680.c +F: Documentation/devicetree/bindings/media/i2c/ov2680.txt + OMNIVISION OV2685 SENSOR DRIVER M: Shunqian Zheng <zhengsq@rock-chips.com> L: linux-media@vger.kernel.org |