From 9a09eb14af7be29078d668ea492f2b2c78022d19 Mon Sep 17 00:00:00 2001
From: Pete Johanson <peter@peterjohanson.com>
Date: Wed, 27 May 2020 00:48:03 -0400
Subject: Initial composite kscan driver.

* For now, to be used for FrankenKyria, where both
  matrix halves will be attached to the same MCU, but
  should be a stepping stone to proper split support
  once we have a kscan driver over a split transport.
* Implement multiple instances for mock kscan driver.
---
 boards/native_posix.conf                           |  1 +
 boards/native_posix.overlay                        | 47 ++++++++++++++++++----
 .../petejohanson_handwire/Kconfig.defconfig        |  2 +
 .../petejohanson_handwire.overlay                  | 37 ++++++++++++++---
 4 files changed, 74 insertions(+), 13 deletions(-)

(limited to 'boards')

diff --git a/boards/native_posix.conf b/boards/native_posix.conf
index 4efd71d..5bfb366 100644
--- a/boards/native_posix.conf
+++ b/boards/native_posix.conf
@@ -1,5 +1,6 @@
 CONFIG_KSCAN=n
 CONFIG_ZMK_KSCAN_MOCK_DRIVER=y
+CONFIG_ZMK_KSCAN_COMPOSITE_DRIVER=y
 CONFIG_ZMK_KSCAN_GPIO_DRIVER=n
 CONFIG_GPIO=n
 CONFIG_ZMK_BLE=n
diff --git a/boards/native_posix.overlay b/boards/native_posix.overlay
index 1d692d4..9d92bee 100644
--- a/boards/native_posix.overlay
+++ b/boards/native_posix.overlay
@@ -7,9 +7,25 @@
 		zmk,keymap = &keymap0;
 	};
 
-	kscan0: kscan {
+	kscan0: kscan_0 {
+		compatible = "zmk,kscan-composite";
+		label = "KSCAN_COMP";
+		rows = <2>;
+		columns = <4>;
+
+		left: left {
+			kscan = <&left_hand>;
+		};
+
+		right: right {
+			kscan = <&right_hand>;
+			column-offset = <2>;
+		};
+	};
+
+	left_hand: kscan_1 {
 		compatible = "zmk,kscan-mock";
-		label = "KSCAN_MOCK0";
+		label = "KSCAN_LEFT";
 
 		rows = <2>;
 		columns = <2>;
@@ -17,6 +33,15 @@
 		// events = <ZMK_MOCK_PRESS(0,0,800) ZMK_MOCK_RELEASE(0,0,800) ZMK_MOCK_PRESS(0,1,800) ZMK_MOCK_RELEASE(0,1,800)>;
 	};
 
+	right_hand: kscan_2 {
+		compatible = "zmk,kscan-mock";
+		label = "KSCAN_RIGHT";
+
+		rows = <2>;
+		columns = <2>;
+		events = <ZMK_MOCK_PRESS(1,1,800) ZMK_MOCK_RELEASE(1,1,100) ZMK_MOCK_PRESS(0,1,800) ZMK_MOCK_RELEASE(0,1,100)>;
+	};
+
 	keymap0: keymap {
 		compatible = "zmk,keymap";
 		label ="Default keymap";
@@ -29,20 +54,26 @@
 		default: layer_0 {
 			label = "DEFAULT";
 			keys =
-	<
-	KC_A MT(MOD_LSFT, KC_B)
-	KC_C KC_D
-	>;
+			<
+				KC_A MT(MOD_LSFT, KC_B) KC_C KC_D
+				KC_E KC_F KC_G KC_H
+			>;
 		};
 
 		lower: layer_1 {
 			label = "LOWER";
-			keys = <KC_D KC_C ZC_TRNS ZC_TRNS>;
+			keys = <
+				KC_A KC_B KC_C KC_D
+				KC_E KC_F KC_G KC_H
+			>;
 		};
 
 		raise: layer_2 {
 			label = "RAISE";
-			keys = <KC_C KC_D ZC_TRNS ZC_TRNS>;
+			keys = <
+				KC_E KC_F KC_G KC_H 
+				KC_A KC_B KC_C KC_D
+			>;
 		};
 	};
 };
diff --git a/boards/shields/petejohanson_handwire/Kconfig.defconfig b/boards/shields/petejohanson_handwire/Kconfig.defconfig
index e69de29..c7408ce 100644
--- a/boards/shields/petejohanson_handwire/Kconfig.defconfig
+++ b/boards/shields/petejohanson_handwire/Kconfig.defconfig
@@ -0,0 +1,2 @@
+
+CONFIG_ZMK_KSCAN_COMPOSITE_DRIVER=y
\ No newline at end of file
diff --git a/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay b/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay
index 72e24a0..d65b3b1 100644
--- a/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay
+++ b/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay
@@ -4,14 +4,41 @@
 		zmk,kscan = &kscan0;
 	};
 
-	kscan0: kscan {
+	kscan0: kscan_0 {
+		compatible = "zmk,kscan-composite";
+		label = "KSCAN_COMP";
+		rows = <2>;
+		columns = <4>;
+
+		left {
+			kscan = <&left_hand>;
+		};
+
+		right {
+			kscan = <&right_hand>;
+			column-offset = <2>;
+		};
+	};
+
+	left_hand: kscan_1 {
 		compatible = "gpio-kscan";
-		label = "KSCAN";
+		label = "KSCAN_LEFT";
 
 		diode-direction = "row2col";
 		row-gpios = <&arduino_header 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-		col-gpios = <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		            <&arduino_header 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		col-gpios = <&arduino_header 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+		            <&arduino_header 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	};
+
+	right_hand: kscan_2 {
+		compatible = "gpio-kscan";
+		label = "KSCAN_RIGHT";
+
+		diode-direction = "row2col";
+		row-gpios = <&arduino_header 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+		            <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		col-gpios = <&arduino_header 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
+		            <&arduino_header 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	};
 };
-- 
cgit v1.2.3