diff options
Diffstat (limited to 'app')
63 files changed, 1162 insertions, 77 deletions
diff --git a/app/CMakeLists.txt b/app/CMakeLists.txt index 3e0560b..31d28f5 100644 --- a/app/CMakeLists.txt +++ b/app/CMakeLists.txt @@ -23,6 +23,7 @@ zephyr_linker_sources(RODATA include/linker/zmk-events.ld) # Add your source file to the "app" target. This must come after # find_package(Zephyr) which defines the target. target_include_directories(app PRIVATE include) +target_sources_ifdef(CONFIG_ZMK_SLEEP app PRIVATE src/power.c) target_sources(app PRIVATE src/kscan.c) target_sources(app PRIVATE src/matrix_transform.c) target_sources(app PRIVATE src/hid.c) @@ -30,6 +31,7 @@ target_sources(app PRIVATE src/sensors.c) target_sources_ifdef(CONFIG_ZMK_DISPLAY app PRIVATE src/display.c) target_sources(app PRIVATE src/event_manager.c) target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/ble_unpair_combo.c) +target_sources_ifdef(CONFIG_ZMK_EXT_POWER app PRIVATE src/ext_power_generic.c) target_sources(app PRIVATE src/events/position_state_changed.c) target_sources(app PRIVATE src/events/keycode_state_changed.c) target_sources(app PRIVATE src/events/modifiers_state_changed.c) @@ -54,7 +56,7 @@ target_sources_ifdef(CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL app PRIVATE src/split/ target_sources_ifdef(CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL app PRIVATE src/split/bluetooth/central.c) target_sources_ifdef(CONFIG_ZMK_KSCAN_MOCK_DRIVER app PRIVATE src/kscan_mock.c) target_sources_ifdef(CONFIG_ZMK_KSCAN_COMPOSITE_DRIVER app PRIVATE src/kscan_composite.c) -target_sources_ifdef(CONFIG_ZMK_USB app PRIVATE src/usb_hid.c) +target_sources_ifdef(CONFIG_USB app PRIVATE src/usb.c) target_sources_ifdef(CONFIG_ZMK_BLE app PRIVATE src/hog.c) target_sources_ifdef(CONFIG_ZMK_RGB_UNDERGLOW app PRIVATE src/rgb_underglow.c) target_sources(app PRIVATE src/endpoints.c) diff --git a/app/Kconfig b/app/Kconfig index ccd40da..fca4912 100644 --- a/app/Kconfig +++ b/app/Kconfig @@ -21,12 +21,16 @@ menuconfig ZMK_USB select USB_DEVICE_STACK select USB_DEVICE_HID -if ZMK_USB +if USB config ZMK_USB_INIT_PRIORITY int "Init Priority" default 50 +endif + +if ZMK_USB + config USB_NUMOF_EP_WRITE_RETRIES default 10 @@ -72,6 +76,29 @@ endif endmenu +menuconfig ZMK_SLEEP + bool "Enable deep sleep support" + imply USB + +if ZMK_SLEEP + +config SYS_POWER_DEEP_SLEEP_STATES + default y + +choice SYS_PM_POLICY + default SYS_PM_POLICY_APP +endchoice + +config ZMK_IDLE_SLEEP_TIMEOUT + int "Milliseconds to wait to sleep when going idle" + default 900000 + +endif + +config ZMK_EXT_POWER + bool "Enable support to control external power output" + default y + config ZMK_DISPLAY bool "ZMK display support" default n @@ -108,7 +135,6 @@ config ZMK_SPLIT_BLE_ROLE_CENTRAL config ZMK_SPLIT_BLE_ROLE_PERIPHERAL bool "Peripheral" - select BT_KEYS_OVERWRITE_OLDEST if ZMK_SPLIT_BLE_ROLE_PERIPHERAL diff --git a/app/boards/arm/nice_nano/nice_nano.dts b/app/boards/arm/nice_nano/nice_nano.dts index 2e9556b..0538b1d 100644 --- a/app/boards/arm/nice_nano/nice_nano.dts +++ b/app/boards/arm/nice_nano/nice_nano.dts @@ -29,6 +29,15 @@ }; }; + ext-power { + compatible = "zmk,ext-power-generic"; + label = "EXT_POWER"; + control-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; +}; + +&gpiote { + status = "okay"; }; &gpio0 { diff --git a/app/boards/arm/nrf52840_m2/CMakeLists.txt b/app/boards/arm/nrf52840_m2/CMakeLists.txt new file mode 100644 index 0000000..84b2ab9 --- /dev/null +++ b/app/boards/arm/nrf52840_m2/CMakeLists.txt @@ -0,0 +1,13 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +set_property(GLOBAL APPEND PROPERTY extra_post_build_commands + COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py + -c + -b 0x26000 + -f 0xADA52840 + -o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2 + ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin +) diff --git a/app/boards/arm/nrf52840_m2/Kconfig b/app/boards/arm/nrf52840_m2/Kconfig new file mode 100644 index 0000000..faff492 --- /dev/null +++ b/app/boards/arm/nrf52840_m2/Kconfig @@ -0,0 +1,10 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +config BOARD_ENABLE_DCDC + bool "Enable DCDC mode" + select SOC_DCDC_NRF52X + default y + depends on BOARD_NRF52840_M2 diff --git a/app/boards/arm/nrf52840_m2/Kconfig.board b/app/boards/arm/nrf52840_m2/Kconfig.board new file mode 100644 index 0000000..6ade68c --- /dev/null +++ b/app/boards/arm/nrf52840_m2/Kconfig.board @@ -0,0 +1,10 @@ +# Maker Diary nrf52840 M.2 board configuration +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +config BOARD_NRF52840_M2 + bool "nrf52480_m2" + depends on SOC_NRF52840_QIAA + diff --git a/app/boards/arm/nrf52840_m2/Kconfig.defconfig b/app/boards/arm/nrf52840_m2/Kconfig.defconfig new file mode 100644 index 0000000..98fcd08 --- /dev/null +++ b/app/boards/arm/nrf52840_m2/Kconfig.defconfig @@ -0,0 +1,30 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +if BOARD_NRF52840_M2 + +config BOARD + default "nrf52480_m2" + +if USB + +config USB_NRFX + default y + +config USB_DEVICE_STACK + default y + +endif # USB + +config BT_CTLR + default BT + +config ZMK_BLE + default y + +config ZMK_USB + default y + +endif # BOARD_NRF52840_M2 diff --git a/app/boards/arm/nrf52840_m2/board.cmake b/app/boards/arm/nrf52840_m2/board.cmake new file mode 100644 index 0000000..55b44e2 --- /dev/null +++ b/app/boards/arm/nrf52840_m2/board.cmake @@ -0,0 +1,9 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset") + +include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake) +include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake) diff --git a/app/boards/arm/nrf52840_m2/nrf52840_m2.dts b/app/boards/arm/nrf52840_m2/nrf52840_m2.dts new file mode 100644 index 0000000..fb5b0ff --- /dev/null +++ b/app/boards/arm/nrf52840_m2/nrf52840_m2.dts @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * SPDX-License-Identifier: MIT + */ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> + +/ { + model = "Makerdiary nRF52840 M.2 module"; + compatible = "makerdiary,nrf52840_m2"; + + chosen { + zephyr,code-partition = &code_partition; + //zephyr,console = &uart0; + //zephyr,bt-mon-uart = &uart0; + //zephyr,bt-c2h-uart = &uart0; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + }; + + leds { + compatible = "gpio-leds"; + red_led: led_0 { + gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; + label = "Red LED"; + }; + green_led: led_1 { + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + label = "Green LED"; + }; + blue_led: led_2 { + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&uart0 { + compatible = "nordic,nrf-uart"; + status = "okay"; + current-speed = <115200>; + tx-pin = <16>; + rx-pin = <15>; + rts-pin = <14>; + cts-pin = <13>; +}; + +&usbd { + compatible = "nordic,nrf-usbd"; + status = "okay"; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot_partition: partition@0 { + label = "adafruit_boot"; + reg = <0x000000000 0x0000C000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000d2000>; + }; + + /* + * The flash starting at 0x000f8000 and ending at + * 0x000fffff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@f8000 { + label = "storage"; + reg = <0x000f8000 0x00008000>; + }; + }; +}; diff --git a/app/boards/arm/nrf52840_m2/nrf52840_m2.yaml b/app/boards/arm/nrf52840_m2/nrf52840_m2.yaml new file mode 100644 index 0000000..0a999bb --- /dev/null +++ b/app/boards/arm/nrf52840_m2/nrf52840_m2.yaml @@ -0,0 +1,15 @@ +identifier: nrf52840_m2 +name: Makerdiary nRF52840 M.2 module +type: mcu +arch: arm +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - usb_device + - ble + - ieee802154 + - pwm + - watchdog diff --git a/app/boards/arm/nrf52840_m2/nrf52840_m2_defconfig b/app/boards/arm/nrf52840_m2/nrf52840_m2_defconfig new file mode 100644 index 0000000..e74438b --- /dev/null +++ b/app/boards/arm/nrf52840_m2/nrf52840_m2_defconfig @@ -0,0 +1,23 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +CONFIG_SOC_SERIES_NRF52X=y +CONFIG_SOC_NRF52840_QIAA=y +CONFIG_BOARD_NRF52840_M2=y + +# Enable MPU +CONFIG_ARM_MPU=y + +# enable GPIO +CONFIG_GPIO=y + +CONFIG_USE_DT_CODE_PARTITION=y + +CONFIG_MPU_ALLOW_FLASH_WRITE=y +CONFIG_NVS=y +CONFIG_SETTINGS_NVS=y +CONFIG_FLASH=y +CONFIG_FLASH_PAGE_LAYOUT=y +CONFIG_FLASH_MAP=y diff --git a/app/boards/arm/nrfmicro/nrfmicro_11.dts b/app/boards/arm/nrfmicro/nrfmicro_11.dts index 95bd8ad..87c650e 100644 --- a/app/boards/arm/nrfmicro/nrfmicro_11.dts +++ b/app/boards/arm/nrfmicro/nrfmicro_11.dts @@ -26,6 +26,11 @@ }; }; + ext-power { + compatible = "zmk,ext-power-generic"; + label = "EXT_POWER"; + control-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; }; &gpio0 { diff --git a/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts index 85693a8..ea15b81 100644 --- a/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts +++ b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts @@ -26,6 +26,11 @@ }; }; + ext-power { + compatible = "zmk,ext-power-generic"; + label = "EXT_POWER"; + control-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; }; &gpio0 { diff --git a/app/boards/arm/nrfmicro/nrfmicro_13.dts b/app/boards/arm/nrfmicro/nrfmicro_13.dts index 95bd8ad..ef43946 100644 --- a/app/boards/arm/nrfmicro/nrfmicro_13.dts +++ b/app/boards/arm/nrfmicro/nrfmicro_13.dts @@ -26,6 +26,11 @@ }; }; + ext-power { + compatible = "zmk,ext-power-generic"; + label = "EXT_POWER"; + control-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; }; &gpio0 { diff --git a/app/boards/arm/nrfmicro/pinmux.c b/app/boards/arm/nrfmicro/pinmux.c index 4e330b6..30117d0 100644 --- a/app/boards/arm/nrfmicro/pinmux.c +++ b/app/boards/arm/nrfmicro/pinmux.c @@ -14,25 +14,14 @@ static int pinmux_nrfmicro_init(struct device *port) { ARG_UNUSED(port); - struct device *p1 = device_get_binding("GPIO_1"); - #if CONFIG_BOARD_NRFMICRO_13 struct device *p0 = device_get_binding("GPIO_0"); - // enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1) - gpio_pin_configure(p1, 9, GPIO_OUTPUT); - gpio_pin_set(p1, 9, 0); - #if CONFIG_BOARD_NRFMICRO_CHARGER gpio_pin_configure(p0, 5, GPIO_OUTPUT); gpio_pin_set(p0, 5, 0); #else gpio_pin_configure(p0, 5, GPIO_INPUT); #endif - -#else - // enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1) - gpio_pin_configure(p1, 9, GPIO_OUTPUT); - gpio_pin_set(p1, 9, 1); #endif return 0; } diff --git a/app/boards/arm/planck/Kconfig.defconfig b/app/boards/arm/planck/Kconfig.defconfig index 6f5bf52..913c1c1 100644 --- a/app/boards/arm/planck/Kconfig.defconfig +++ b/app/boards/arm/planck/Kconfig.defconfig @@ -11,4 +11,7 @@ config ZMK_KEYBOARD_NAME config ZMK_USB default y +config ZMK_KSCAN_MATRIX_POLLING + default y + endif # BOARD_PLANCK_REV6 diff --git a/app/boards/shields/clueboard_california/Kconfig.defconfig b/app/boards/shields/clueboard_california/Kconfig.defconfig index 2408f9f..e101ea7 100644 --- a/app/boards/shields/clueboard_california/Kconfig.defconfig +++ b/app/boards/shields/clueboard_california/Kconfig.defconfig @@ -8,7 +8,7 @@ config ZMK_KEYBOARD_NAME # across A & B controllers, and STM32F303CCT6 can't enable # interrutps for multiple controllers for the same "line" # for the external interrupts. -config ZMK_KSCAN_GPIO_POLLING +config ZMK_KSCAN_DIRECT_POLLING default y endif diff --git a/app/boards/shields/clueboard_california/clueboard_california.keymap b/app/boards/shields/clueboard_california/clueboard_california.keymap index 7a84b11..44a0b07 100644 --- a/app/boards/shields/clueboard_california/clueboard_california.keymap +++ b/app/boards/shields/clueboard_california/clueboard_california.keymap @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> diff --git a/app/boards/shields/corne/corne.keymap b/app/boards/shields/corne/corne.keymap index 5f0f15f..64d4a00 100644 --- a/app/boards/shields/corne/corne.keymap +++ b/app/boards/shields/corne/corne.keymap @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> #include <dt-bindings/zmk/bt.h> diff --git a/app/boards/shields/iris/iris.keymap b/app/boards/shields/iris/iris.keymap index 6042ad7..8b06b1b 100644 --- a/app/boards/shields/iris/iris.keymap +++ b/app/boards/shields/iris/iris.keymap @@ -1,5 +1,5 @@ /* - * Copyright (c) 2020 Pete Johanson, Kurtis Lew + * Copyright (c) 2020 The ZMK Contributors * * SPDX-License-Identifier: MIT */ diff --git a/app/boards/shields/kyria/kyria.keymap b/app/boards/shields/kyria/kyria.keymap index f689ef6..ac0d13f 100644 --- a/app/boards/shields/kyria/kyria.keymap +++ b/app/boards/shields/kyria/kyria.keymap @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> diff --git a/app/boards/shields/lily58/lily58.keymap b/app/boards/shields/lily58/lily58.keymap index 61c19f8..997a124 100644 --- a/app/boards/shields/lily58/lily58.keymap +++ b/app/boards/shields/lily58/lily58.keymap @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> #include <dt-bindings/zmk/bt.h> diff --git a/app/boards/shields/m60/Kconfig.defconfig b/app/boards/shields/m60/Kconfig.defconfig new file mode 100644 index 0000000..e31d5a5 --- /dev/null +++ b/app/boards/shields/m60/Kconfig.defconfig @@ -0,0 +1,11 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +if SHIELD_M60 + +config ZMK_KEYBOARD_NAME + default "m60" + +endif diff --git a/app/boards/shields/m60/Kconfig.shield b/app/boards/shields/m60/Kconfig.shield new file mode 100644 index 0000000..47a28e2 --- /dev/null +++ b/app/boards/shields/m60/Kconfig.shield @@ -0,0 +1,7 @@ +# +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +config SHIELD_M60 + def_bool $(shields_list_contains,m60) diff --git a/app/boards/shields/m60/m60.conf b/app/boards/shields/m60/m60.conf new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/app/boards/shields/m60/m60.conf diff --git a/app/boards/shields/m60/m60.keymap b/app/boards/shields/m60/m60.keymap new file mode 100644 index 0000000..cbe356c --- /dev/null +++ b/app/boards/shields/m60/m60.keymap @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include <behaviors.dtsi> +#include <dt-bindings/zmk/keys.h> +#include <dt-bindings/zmk/bt.h> + +/ { + keymap0: keymap { + compatible = "zmk,keymap"; + + default_layer { +// ------------------------------------------------------------------------------------------ +// | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BKSP | +// | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +// | CAPS | A | S | D | F | G | H | J | K | L | ; | ' | ENTER | +// | SHIFT | Z | X | C | V | B | N | M | , | . | / | SHIFT | +// | CTL | WIN | ALT | SPACE | ALT | MO(1) | WIN | CTRL | +// ------------------------------------------------------------------------------------------ + bindings = < + &kp ESC &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp MINUS &kp EQL &kp BKSP + &kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp LBKT &kp RBKT &kp BSLH + &kp CLCK &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SCLN &kp QUOT &kp RET + &kp LSFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &kp FSLH &kp RSFT + &kp LCTL &kp LGUI &kp LALT &kp SPC &kp RALT &mo 1 &kp RGUI &kp RCTL + >; + }; + + fn_layer { + bindings = < +&kp GRAV &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12 &bootloader +&trans &bt BT_CLR &none &none &none &none &none &none &none &none &none &none &none &reset +&trans &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &kp LARW &kp DARW &kp UARW &kp RARW &none &none &trans +&trans &none &none &none &none &none &none &none &none &none &none &trans +&trans &trans &trans &trans &trans &trans &trans &trans + >; + }; + }; +}; diff --git a/app/boards/shields/m60/m60.overlay b/app/boards/shields/m60/m60.overlay new file mode 100644 index 0000000..babae2d --- /dev/null +++ b/app/boards/shields/m60/m60.overlay @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include <dt-bindings/zmk/matrix-transform.h> + +/ { + chosen { + zmk,kscan = &kscan0; + zmk,matrix_transform = &default_transform; + }; + + kscan0: kscan { + compatible = "zmk,kscan-gpio-matrix"; + label = "KSCAN"; + + diode-direction = "col2row"; + row-gpios + = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio0 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio0 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio0 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio1 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio1 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&gpio0 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + ; + col-gpios + = <&gpio0 19 GPIO_ACTIVE_HIGH> + , <&gpio0 20 GPIO_ACTIVE_HIGH> + , <&gpio0 21 GPIO_ACTIVE_HIGH> + , <&gpio0 22 GPIO_ACTIVE_HIGH> + , <&gpio0 23 GPIO_ACTIVE_HIGH> + , <&gpio0 24 GPIO_ACTIVE_HIGH> + , <&gpio0 25 GPIO_ACTIVE_HIGH> + , <&gpio0 26 GPIO_ACTIVE_HIGH> + ; + }; + + default_transform: keymap_transform_0 { + compatible = "zmk,matrix-transform"; + columns = <8>; + rows = <8>; +// | MX1 | MX2 | MX3 | MX4 | MX5 | MX6 | MX7 | MX8 | MX9 | MX10 | MX11 | MX12 | MX13 | MX14 | +// | MX15 | MX16 | MX17 | MX18 | MX19 | MX20 | MX21 | MX22 | MX23 | MX24 | MX25 | MX26 | MX27 | MX28 | +// | MX29 | MX30 | MX31 | MX32 | MX33 | MX34 | MX35 | MX36 | MX37 | MX38 | MX39 | MX40 | MX41 | +// | MX42 | MX43 | MX44 | MX45 | MX46 | MX47 | MX48 | MX49 | MX50 | MX51 | MX52 | MX53 | +// | MX54 | MX55 | MX56 | MX57 | MX58 | MX59 | MX60 | MX61 | + map = < +RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) +RC(3,3) RC(3,2) RC(3,1) RC(3,0) RC(2,7) RC(2,6) RC(2,5) RC(2,4) RC(2,3) RC(2,2) RC(2,1) RC(2,0) RC(1,7) RC(1,6) +RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,7) RC(5,0) +RC(6,4) RC(6,3) RC(6,2) RC(6,1) RC(6,0) RC(5,7) RC(5,6) RC(5,5) RC(5,4) RC(5,3) RC(5,2) RC(5,1) +RC(6,5) RC(6,6) RC(6,7) RC(7,0) RC(7,1) RC(7,2) RC(7,3) RC(7,4) + >; + }; + + bt_unpair_combo: bt_unpair_combo { + compatible = "zmk,bt-unpair-combo"; + key-positions = <0 53>; + }; + +}; + diff --git a/app/boards/shields/m60/readme.md b/app/boards/shields/m60/readme.md new file mode 100644 index 0000000..e801c78 --- /dev/null +++ b/app/boards/shields/m60/readme.md @@ -0,0 +1,14 @@ +# [Makerdiary M60](https://wiki.makerdiary.com/m60) + +A 60% ANSI keyboard designed and manufactured by Makerdiary. +http://makerdiary.com + +## Features + +- Per key RGB LED. +- Uses makerdiary M.2 nRF52840 module +- Matrix wiring + +## Hardware Notes + +https://wiki.makerdiary.com/m60/developer_guide/hardware/ diff --git a/app/boards/shields/microdox/Kconfig.defconfig b/app/boards/shields/microdox/Kconfig.defconfig new file mode 100644 index 0000000..4840ece --- /dev/null +++ b/app/boards/shields/microdox/Kconfig.defconfig @@ -0,0 +1,60 @@ +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT + +if SHIELD_MICRODOX_LEFT + +config ZMK_KEYBOARD_NAME + default "Microdox Left" + +endif + + +if SHIELD_MICRODOX_RIGHT + +config ZMK_KEYBOARD_NAME + default "Microdox Right" + +endif + +if SHIELD_MICRODOX_LEFT || SHIELD_MICRODOX_RIGHT + +config ZMK_SPLIT + default y + +if ZMK_DISPLAY + +config I2C + default y + +config SSD1306 + default y + +config SSD1306_REVERSE_MODE + default y + +endif # ZMK_DISPLAY + +if LVGL + +config LVGL_HOR_RES + default 128 + +config LVGL_VER_RES + default 32 + +config LVGL_VDB_SIZE + default 64 + +config LVGL_DPI + default 148 + +config LVGL_BITS_PER_PIXEL + default 1 + +choice LVGL_COLOR_DEPTH + default LVGL_COLOR_DEPTH_1 +endchoice + +endif # LVGL + +endif diff --git a/app/boards/shields/microdox/Kconfig.shield b/app/boards/shields/microdox/Kconfig.shield new file mode 100644 index 0000000..ac79eab --- /dev/null +++ b/app/boards/shields/microdox/Kconfig.shield @@ -0,0 +1,8 @@ +# Copyright (c) 2020 The ZMK Contributors +# SPDX-License-Identifier: MIT + +config SHIELD_MICRODOX_LEFT + def_bool $(shields_list_contains,microdox_left) + +config SHIELD_MICRODOX_RIGHT + def_bool $(shields_list_contains,microdox_right) diff --git a/app/boards/shields/microdox/boards/nice_nano.overlay b/app/boards/shields/microdox/boards/nice_nano.overlay new file mode 100644 index 0000000..58cd861 --- /dev/null +++ b/app/boards/shields/microdox/boards/nice_nano.overlay @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ +&spi1 { + compatible = "nordic,nrf-spi"; + /* Cannot be used together with i2c0. */ + status = "okay"; + mosi-pin = <6>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <5>; + miso-pin = <7>; + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "SK6812mini"; + + /* SPI */ + reg = <0>; /* ignored, but necessary for SPI bindings */ + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <6>; /* There are per-key RGB, but the first 6 are underglow */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; + +/ { + chosen { + zmk,underglow = &led_strip; + }; +}; diff --git a/app/boards/shields/microdox/microdox.conf b/app/boards/shields/microdox/microdox.conf new file mode 100644 index 0000000..b79385b --- /dev/null +++ b/app/boards/shields/microdox/microdox.conf @@ -0,0 +1,6 @@ +# Uncomment the following lines to enable the Corne RGB Underglow +# ZMK_RGB_UNDERGLOW=y +# CONFIG_WS2812_STRIP=y + +# Uncomment the following line to enable the Corne OLED Display +# CONFIG_ZMK_DISPLAY=y diff --git a/app/boards/shields/microdox/microdox.dtsi b/app/boards/shields/microdox/microdox.dtsi new file mode 100644 index 0000000..55c67dd --- /dev/null +++ b/app/boards/shields/microdox/microdox.dtsi @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include <dt-bindings/zmk/matrix-transform.h> + +/ { + chosen { + zmk,kscan = &kscan0; + zmk,matrix_transform = &default_transform; + }; + + default_transform: keymap_transform_0 { + compatible = "zmk,matrix-transform"; + columns = <10>; + rows = <4>; +// | SW1 | SW2 | SW3 | SW4 | SW5 | | SW5 | SW4 | SW3 | SW2 | SW1 | +// | SW6 | SW7 | SW8 | SW9 | SW10 | | SW10 | SW9 | SW8 | SW7 | SW6 | +// | SW11 | SW12 | SW13 | SW14 | SW15 | | SW15 | SW14 | SW13 | SW12 | SW11 | +// | SW16 | SW17 | SW18 | | SW18 | SW17 | SW16 | + map = < +RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9) +RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) +RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) + RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) + >; + }; + + kscan0: kscan { + compatible = "zmk,kscan-gpio-matrix"; + label = "KSCAN"; + + diode-direction = "col2row"; + row-gpios + = <&pro_micro_d 16 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro_d 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro_d 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + , <&pro_micro_d 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)> + ; + + }; + + // TODO: per-key RGB node(s)? +}; + +&pro_micro_i2c { + status = "okay"; + + oled: ssd1306@3c { + compatible = "solomon,ssd1306fb"; + reg = <0x3c>; + label = "DISPLAY"; + width = <128>; + height = <32>; + segment-offset = <0>; + page-offset = <0>; + display-offset = <0>; + multiplex-ratio = <31>; + segment-remap; + com-invdir; + com-sequential; + prechargep = <0x22>; + }; +}; diff --git a/app/boards/shields/microdox/microdox.keymap b/app/boards/shields/microdox/microdox.keymap new file mode 100644 index 0000000..5747771 --- /dev/null +++ b/app/boards/shields/microdox/microdox.keymap @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include <behaviors.dtsi> +#include <dt-bindings/zmk/keys.h> +#include <dt-bindings/zmk/bt.h> + +/ { + keymap { + compatible = "zmk,keymap"; + + default_layer { +// ----------------------------------------------------------------------------------------- +// | Q | W | E | R | T | | Y | U | I | O | P | +// | A | S | D | F | G | | H | J | K | L | ; | +// | Z | X | C | V | B | | N | M | , | . | / | +// | GUI | NAV | SHFT | | SPC | SYM | ALT | + bindings = < + &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P + &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SCLN + &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &kp FSLH + &kp LGUI &mo 1 &kp LSFT &kp SPC &mo 2 &kp RALT + >; + }; + nav_layer { +// ----------------------------------------------------------------------------------------- +// |BTCLR| | ESC | ~ | | | TAB | HOME | UP | END | DEL | +// | BT1 | GUI | ALT | CTRL | NUM | | / | LEFT | DOWN | RGT | BKSP | +// | BT2 | | | | | | \ | ENT | | | | +// | | | | | | | | + bindings = < + &bt BT_CLR &trans &kp ESC &kp TILD &trans &kp TAB &kp HOME &kp UARW &kp END &kp DEL + &bt BT_SEL 0 &kp GUI &kp RALT &kp LCTL &mo 3 &kp FSLH &kp LARW &kp DARW &kp RARW &kp BKSP + &bt BT_SEL 1 &trans &trans &trans &trans &kp BSLH &kp RET &trans &trans &trans + &trans &trans &trans &trans &trans &trans + >; + }; + + sym_layer { +// ----------------------------------------------------------------------------------------- +// | ! | @ | # | $ | % | | ^ | & | * | ( | ) | +// | | | | | | | - | = | { | } | "|" | +// | | | | | | | _ | + | [ | ] | \ | +// | GUI | | SPC | | ENT | | ALT | + bindings = < + &kp BANG &kp ATSN &kp HASH &kp CURU &kp PRCT &kp CRRT &kp AMPS &kp KMLT &kp LPRN &kp RPRN + &trans &trans &trans &trans &trans &kp MINUS &kp EQL &kp LBKT &kp RBKT &kp PIPE + &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp BSLH + &kp LGUI &trans &kp SPC &kp RET &trans &kp RALT + >; + }; + +// This layer is unreachable until "tri layer state" is sorted out. +// Leaving it here for completeness. + num_layer { +// ----------------------------------------------------------------------------------------- +// | | | | | | | A | 7 | 8 | 9 | D | +// | | | | | | | B | 4 | 5 | 6 | E | +// | | | | | | | C | 1 | 2 | 3 | F | +// | | | | | 0 | . | | + bindings = < + &trans &trans &trans &trans &trans &kp A &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp D + &trans &trans &trans &trans &trans &kp B &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp E + &trans &trans &trans &trans &trans &kp C &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp F + &trans &trans &trans &kp NUM_0 &kp DOT &trans + >; + }; + }; +}; + diff --git a/app/boards/shields/microdox/microdox_left.conf b/app/boards/shields/microdox/microdox_left.conf new file mode 100644 index 0000000..1e028a7 --- /dev/null +++ b/app/boards/shields/microdox/microdox_left.conf @@ -0,0 +1,2 @@ +CONFIG_ZMK_SPLIT=y +CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y diff --git a/app/boards/shields/microdox/microdox_left.overlay b/app/boards/shields/microdox/microdox_left.overlay new file mode 100644 index 0000000..4d0378e --- /dev/null +++ b/app/boards/shields/microdox/microdox_left.overlay @@ -0,0 +1,17 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include "microdox.dtsi" + +&kscan0 { + col-gpios + = <&pro_micro_a 3 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 2 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 1 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 0 GPIO_ACTIVE_HIGH> + , <&pro_micro_d 15 GPIO_ACTIVE_HIGH> + ; +}; diff --git a/app/boards/shields/microdox/microdox_right.conf b/app/boards/shields/microdox/microdox_right.conf new file mode 100644 index 0000000..990cf7c --- /dev/null +++ b/app/boards/shields/microdox/microdox_right.conf @@ -0,0 +1,2 @@ +CONFIG_ZMK_SPLIT=y +CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y diff --git a/app/boards/shields/microdox/microdox_right.overlay b/app/boards/shields/microdox/microdox_right.overlay new file mode 100644 index 0000000..c5622b2 --- /dev/null +++ b/app/boards/shields/microdox/microdox_right.overlay @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include "microdox.dtsi" + +&default_transform { + col-offset = <5>; +}; + +&kscan0 { + col-gpios + = <&pro_micro_d 15 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 0 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 1 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 2 GPIO_ACTIVE_HIGH> + , <&pro_micro_a 3 GPIO_ACTIVE_HIGH> + ; +}; diff --git a/app/boards/shields/romac/romac.keymap b/app/boards/shields/romac/romac.keymap index 97ea9c5..31e1ce8 100644 --- a/app/boards/shields/romac/romac.keymap +++ b/app/boards/shields/romac/romac.keymap @@ -1,5 +1,5 @@ /* - * Copyright (c) 2020 Pete Johanson, Richard Jones + * Copyright (c) 2020 The ZMK Contributors * * SPDX-License-Identifier: MIT */ diff --git a/app/boards/shields/sofle/sofle.keymap b/app/boards/shields/sofle/sofle.keymap index 1cbe742..e2ebc1a 100644 --- a/app/boards/shields/sofle/sofle.keymap +++ b/app/boards/shields/sofle/sofle.keymap @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> #include <dt-bindings/zmk/bt.h> diff --git a/app/boards/shields/splitreus62/splitreus62.keymap b/app/boards/shields/splitreus62/splitreus62.keymap index 920e61a..07dd2ad 100644 --- a/app/boards/shields/splitreus62/splitreus62.keymap +++ b/app/boards/shields/splitreus62/splitreus62.keymap @@ -1,9 +1,10 @@ /* - * Copyright (c) 2020 Derek Schmell + * Copyright (c) 2020 The ZMK Contributors * * SPDX-License-Identifier: MIT */ + #include <behaviors.dtsi> #include <dt-bindings/zmk/keys.h> diff --git a/app/drivers/zephyr/Kconfig b/app/drivers/zephyr/Kconfig index 0237846..0534cab 100644 --- a/app/drivers/zephyr/Kconfig +++ b/app/drivers/zephyr/Kconfig @@ -5,10 +5,14 @@ config ZMK_KSCAN_GPIO_DRIVER if ZMK_KSCAN_GPIO_DRIVER -config ZMK_KSCAN_GPIO_POLLING - bool "Poll for key event triggers instead of using interrupts" +config ZMK_KSCAN_MATRIX_POLLING + bool "Poll for key event triggers instead of using interrupts on matrix boards." default n +config ZMK_KSCAN_DIRECT_POLLING + bool "Poll for key event triggers instead of using interrupts on direct wired boards." + default n + endif config ZMK_KSCAN_INIT_PRIORITY diff --git a/app/drivers/zephyr/ec11.c b/app/drivers/zephyr/ec11.c index a4e96c2..00d0090 100644 --- a/app/drivers/zephyr/ec11.c +++ b/app/drivers/zephyr/ec11.c @@ -142,7 +142,7 @@ int ec11_init(struct device *dev) { .b_flags = DT_INST_GPIO_FLAGS(n, b_gpios), \ COND_CODE_0(DT_INST_NODE_HAS_PROP(n, resolution), (1), (DT_INST_PROP(n, resolution))), \ }; \ - DEVICE_AND_API_INIT(ec11, DT_INST_LABEL(n), ec11_init, &ec11_data_##n, &ec11_cfg_##n, \ + DEVICE_AND_API_INIT(ec11_##n, DT_INST_LABEL(n), ec11_init, &ec11_data_##n, &ec11_cfg_##n, \ POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY, &ec11_driver_api); DT_INST_FOREACH_STATUS_OKAY(EC11_INST)
\ No newline at end of file diff --git a/app/drivers/zephyr/kscan_gpio_direct.c b/app/drivers/zephyr/kscan_gpio_direct.c index 1e5ab59..4818c99 100644 --- a/app/drivers/zephyr/kscan_gpio_direct.c +++ b/app/drivers/zephyr/kscan_gpio_direct.c @@ -33,9 +33,9 @@ struct kscan_gpio_config { }; struct kscan_gpio_data { -#if defined(CONFIG_ZMK_KSCAN_GPIO_POLLING) +#if defined(CONFIG_ZMK_KSCAN_DIRECT_POLLING) struct k_timer poll_timer; -#endif /* defined(CONFIG_ZMK_KSCAN_GPIO_POLLING) */ +#endif /* defined(CONFIG_ZMK_KSCAN_DIRECT_POLLING) */ kscan_callback_t callback; union work_reference work; struct device *dev; @@ -53,7 +53,7 @@ static const struct kscan_gpio_item_config *kscan_gpio_input_configs(struct devi return cfg->inputs; } -#if !defined(CONFIG_ZMK_KSCAN_GPIO_POLLING) +#if !defined(CONFIG_ZMK_KSCAN_DIRECT_POLLING) struct kscan_gpio_irq_callback { union work_reference *work; @@ -101,7 +101,7 @@ static void kscan_gpio_irq_callback_handler(struct device *dev, struct gpio_call } } -#else /* !defined(CONFIG_ZMK_KSCAN_GPIO_POLLING) */ +#else /* !defined(CONFIG_ZMK_KSCAN_DIRECT_POLLING) */ static void kscan_gpio_timer_handler(struct k_timer *timer) { struct kscan_gpio_data *data = CONTAINER_OF(timer, struct kscan_gpio_data, poll_timer); @@ -120,7 +120,7 @@ static int kscan_gpio_direct_disable(struct device *dev) { return 0; } -#endif /* defined(CONFIG_ZMK_KSCAN_GPIO_POLLING) */ +#endif /* defined(CONFIG_ZMK_KSCAN_DIRECT_POLLING) */ static int kscan_gpio_direct_configure(struct device *dev, kscan_callback_t callback) { struct kscan_gpio_data *data = dev->driver_data; @@ -173,7 +173,7 @@ static const struct kscan_driver_api gpio_driver_api = { #define INST_INPUT_LEN(n) DT_INST_PROP_LEN(n, input_gpios) #define GPIO_INST_INIT(n) \ - COND_CODE_0(CONFIG_ZMK_KSCAN_GPIO_POLLING, \ + COND_CODE_0(IS_ENABLED(CONFIG_ZMK_KSCAN_DIRECT_POLLING), \ (static struct kscan_gpio_irq_callback irq_callbacks_##n[INST_INPUT_LEN(n)];), ()) \ static struct kscan_gpio_data kscan_gpio_data_##n = { \ .inputs = {[INST_INPUT_LEN(n) - 1] = NULL}}; \ @@ -195,7 +195,7 @@ static const struct kscan_driver_api gpio_driver_api = { return err; \ } \ COND_CODE_0( \ - CONFIG_ZMK_KSCAN_GPIO_POLLING, \ + IS_ENABLED(CONFIG_ZMK_KSCAN_DIRECT_POLLING), \ (irq_callbacks_##n[i].work = &data->work; \ irq_callbacks_##n[i].debounce_period = cfg->debounce_period; \ gpio_init_callback(&irq_callbacks_##n[i].callback, \ @@ -208,7 +208,7 @@ static const struct kscan_driver_api gpio_driver_api = { ()) \ } \ data->dev = dev; \ - COND_CODE_1(CONFIG_ZMK_KSCAN_GPIO_POLLING, \ + COND_CODE_1(IS_ENABLED(CONFIG_ZMK_KSCAN_DIRECT_POLLING), \ (k_timer_init(&data->poll_timer, kscan_gpio_timer_handler, NULL);), ()) \ if (cfg->debounce_period > 0) { \ k_delayed_work_init(&data->work.delayed, kscan_gpio_work_handler); \ @@ -227,4 +227,4 @@ static const struct kscan_driver_api gpio_driver_api = { DT_INST_FOREACH_STATUS_OKAY(GPIO_INST_INIT) -#endif /* DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT) */
\ No newline at end of file +#endif /* DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT) */ diff --git a/app/drivers/zephyr/kscan_gpio_matrix.c b/app/drivers/zephyr/kscan_gpio_matrix.c index 634f694..a0b22e4 100644 --- a/app/drivers/zephyr/kscan_gpio_matrix.c +++ b/app/drivers/zephyr/kscan_gpio_matrix.c @@ -31,6 +31,7 @@ struct kscan_gpio_item_config { #define _KSCAN_GPIO_ROW_CFG_INIT(idx, n) _KSCAN_GPIO_ITEM_CFG_INIT(n, row_gpios, idx) #define _KSCAN_GPIO_COL_CFG_INIT(idx, n) _KSCAN_GPIO_ITEM_CFG_INIT(n, col_gpios, idx) +#if !defined(CONFIG_ZMK_KSCAN_MATRIX_POLLING) static int kscan_gpio_config_interrupts(struct device **devices, const struct kscan_gpio_item_config *configs, size_t len, gpio_flags_t flags) { @@ -48,6 +49,8 @@ static int kscan_gpio_config_interrupts(struct device **devices, return 0; } +#endif + #define INST_MATRIX_ROWS(n) DT_INST_PROP_LEN(n, row_gpios) #define INST_MATRIX_COLS(n) DT_INST_PROP_LEN(n, col_gpios) #define INST_OUTPUT_LEN(n) \ @@ -61,6 +64,7 @@ static int kscan_gpio_config_interrupts(struct device **devices, struct kscan_gpio_irq_callback_##n { \ struct COND_CODE_0(DT_INST_PROP(n, debounce_period), (k_work), (k_delayed_work)) * work; \ struct gpio_callback callback; \ + struct device *dev; \ }; \ static struct kscan_gpio_irq_callback_##n irq_callbacks_##n[INST_INPUT_LEN(n)]; \ struct kscan_gpio_config_##n { \ @@ -69,6 +73,7 @@ static int kscan_gpio_config_interrupts(struct device **devices, }; \ struct kscan_gpio_data_##n { \ kscan_callback_t callback; \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, (struct k_timer poll_timer;), ()) \ struct COND_CODE_0(DT_INST_PROP(n, debounce_period), (k_work), (k_delayed_work)) work; \ bool matrix_state[INST_MATRIX_ROWS(n)][INST_MATRIX_COLS(n)]; \ struct device *rows[INST_MATRIX_ROWS(n)]; \ @@ -96,21 +101,25 @@ static int kscan_gpio_config_interrupts(struct device **devices, return ( \ COND_CODE_0(DT_ENUM_IDX(DT_DRV_INST(n), diode_direction), (cfg->rows), (cfg->cols))); \ } \ - static int kscan_gpio_enable_interrupts_##n(struct device *dev) { \ - return kscan_gpio_config_interrupts(kscan_gpio_input_devices_##n(dev), \ - kscan_gpio_input_configs_##n(dev), INST_INPUT_LEN(n), \ - GPIO_INT_DEBOUNCE | GPIO_INT_EDGE_BOTH); \ - } \ - static int kscan_gpio_disable_interrupts_##n(struct device *dev) { \ - return kscan_gpio_config_interrupts(kscan_gpio_input_devices_##n(dev), \ - kscan_gpio_input_configs_##n(dev), INST_INPUT_LEN(n), \ - GPIO_INT_DISABLE); \ - } \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, (), \ + ( \ + static int kscan_gpio_enable_interrupts_##n(struct device *dev) { \ + return kscan_gpio_config_interrupts( \ + kscan_gpio_input_devices_##n(dev), kscan_gpio_input_configs_##n(dev), \ + INST_INPUT_LEN(n), GPIO_INT_LEVEL_ACTIVE); \ + } static int kscan_gpio_disable_interrupts_##n(struct device *dev) { \ + return kscan_gpio_config_interrupts(kscan_gpio_input_devices_##n(dev), \ + kscan_gpio_input_configs_##n(dev), \ + INST_INPUT_LEN(n), GPIO_INT_DISABLE); \ + })) \ static void kscan_gpio_set_output_state_##n(struct device *dev, int value) { \ + int err; \ for (int i = 0; i < INST_OUTPUT_LEN(n); i++) { \ struct device *in_dev = kscan_gpio_output_devices_##n(dev)[i]; \ const struct kscan_gpio_item_config *cfg = &kscan_gpio_output_configs_##n(dev)[i]; \ - gpio_pin_set(in_dev, cfg->pin, value); \ + if ((err = gpio_pin_set(in_dev, cfg->pin, value))) { \ + LOG_DBG("FAILED TO SET OUTPUT %d to %d", cfg->pin, err); \ + } \ } \ } \ static void kscan_gpio_set_matrix_state_##n( \ @@ -128,7 +137,6 @@ static int kscan_gpio_config_interrupts(struct device **devices, /* Disable our interrupts temporarily while we scan, to avoid */ \ /* re-entry while we iterate columns and set them active one by one */ \ /* to get pressed state for each matrix cell. */ \ - kscan_gpio_disable_interrupts_##n(dev); \ kscan_gpio_set_output_state_##n(dev, 0); \ for (int o = 0; o < INST_OUTPUT_LEN(n); o++) { \ struct device *out_dev = kscan_gpio_output_devices_##n(dev)[o]; \ @@ -143,10 +151,8 @@ static int kscan_gpio_config_interrupts(struct device **devices, } \ gpio_pin_set(out_dev, out_cfg->pin, 0); \ } \ - /* Set all our outputs as active again, then re-enable interrupts, */ \ - /* so we can trigger interrupts again for future press/release */ \ + /* Set all our outputs as active again. */ \ kscan_gpio_set_output_state_##n(dev, 1); \ - kscan_gpio_enable_interrupts_##n(dev); \ for (int r = 0; r < INST_MATRIX_ROWS(n); r++) { \ for (int c = 0; c < INST_MATRIX_COLS(n); c++) { \ bool pressed = read_state[r][c]; \ @@ -165,6 +171,9 @@ static int kscan_gpio_config_interrupts(struct device **devices, k_delayed_work_cancel(&data->work); \ k_delayed_work_submit(&data->work, K_MSEC(5)); \ })) \ + } else { \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, (), \ + (kscan_gpio_enable_interrupts_##n(dev);)) \ } \ return 0; \ } \ @@ -172,16 +181,20 @@ static int kscan_gpio_config_interrupts(struct device **devices, struct kscan_gpio_data_##n *data = CONTAINER_OF(work, struct kscan_gpio_data_##n, work); \ kscan_gpio_read_##n(data->dev); \ } \ - static void kscan_gpio_irq_callback_handler_##n(struct device *dev, struct gpio_callback *cb, \ - gpio_port_pins_t pin) { \ - struct kscan_gpio_irq_callback_##n *data = \ - CONTAINER_OF(cb, struct kscan_gpio_irq_callback_##n, callback); \ - COND_CODE_0(DT_INST_PROP(n, debounce_period), ({ k_work_submit(data->work); }), ({ \ - k_delayed_work_cancel(data->work); \ - k_delayed_work_submit(data->work, \ - K_MSEC(DT_INST_PROP(n, debounce_period))); \ - })) \ - } \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, (), \ + (static void kscan_gpio_irq_callback_handler_##n( \ + struct device *dev, struct gpio_callback *cb, gpio_port_pins_t pin) { \ + struct kscan_gpio_irq_callback_##n *data = \ + CONTAINER_OF(cb, struct kscan_gpio_irq_callback_##n, callback); \ + kscan_gpio_disable_interrupts_##n(data->dev); \ + COND_CODE_0(DT_INST_PROP(n, debounce_period), \ + ({ k_work_submit(data->work); }), ({ \ + k_delayed_work_cancel(data->work); \ + k_delayed_work_submit( \ + data->work, K_MSEC(DT_INST_PROP(n, debounce_period))); \ + })) \ + })) \ + \ static struct kscan_gpio_data_##n kscan_gpio_data_##n = { \ .rows = {[INST_MATRIX_ROWS(n) - 1] = NULL}, .cols = {[INST_MATRIX_COLS(n) - 1] = NULL}}; \ static int kscan_gpio_configure_##n(struct device *dev, kscan_callback_t callback) { \ @@ -190,15 +203,29 @@ static int kscan_gpio_config_interrupts(struct device **devices, return -EINVAL; \ } \ data->callback = callback; \ + LOG_DBG("Configured GPIO %d", n); \ return 0; \ }; \ static int kscan_gpio_enable_##n(struct device *dev) { \ - int err = kscan_gpio_enable_interrupts_##n(dev); \ - if (err) { \ - return err; \ - } \ - return kscan_gpio_read_##n(dev); \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, \ + (struct kscan_gpio_data_##n *data = dev->driver_data; \ + k_timer_start(&data->poll_timer, K_MSEC(10), K_MSEC(10)); return 0;), \ + (int err = kscan_gpio_enable_interrupts_##n(dev); \ + if (err) { return err; } return kscan_gpio_read_##n(dev);)) \ + }; \ + static int kscan_gpio_disable_##n(struct device *dev) { \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, \ + (struct kscan_gpio_data_##n *data = dev->driver_data; \ + k_timer_stop(&data->poll_timer); return 0;), \ + (return kscan_gpio_disable_interrupts_##n(dev);)) \ }; \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, \ + (static void kscan_gpio_timer_handler(struct k_timer *timer) { \ + struct kscan_gpio_data_##n *data = \ + CONTAINER_OF(timer, struct kscan_gpio_data_##n, poll_timer); \ + k_work_submit(&data->work.work); \ + }), \ + ()) \ static int kscan_gpio_init_##n(struct device *dev) { \ struct kscan_gpio_data_##n *data = dev->driver_data; \ int err; \ @@ -214,8 +241,11 @@ static int kscan_gpio_config_interrupts(struct device **devices, if (err) { \ LOG_ERR("Unable to configure pin %d on %s for input", in_cfg->pin, in_cfg->label); \ return err; \ + } else { \ + LOG_DBG("Configured pin %d on %s for input", in_cfg->pin, in_cfg->label); \ } \ irq_callbacks_##n[i].work = &data->work; \ + irq_callbacks_##n[i].dev = dev; \ gpio_init_callback(&irq_callbacks_##n[i].callback, \ kscan_gpio_irq_callback_handler_##n, BIT(in_cfg->pin)); \ err = gpio_add_callback(input_devices[i], &irq_callbacks_##n[i].callback); \ @@ -241,6 +271,8 @@ static int kscan_gpio_config_interrupts(struct device **devices, } \ } \ data->dev = dev; \ + COND_CODE_1(CONFIG_ZMK_KSCAN_MATRIX_POLLING, \ + (k_timer_init(&data->poll_timer, kscan_gpio_timer_handler, NULL);), ()) \ (COND_CODE_0(DT_INST_PROP(n, debounce_period), (k_work_init), (k_delayed_work_init)))( \ &data->work, kscan_gpio_work_handler_##n); \ return 0; \ @@ -248,7 +280,7 @@ static int kscan_gpio_config_interrupts(struct device **devices, static const struct kscan_driver_api gpio_driver_api_##n = { \ .config = kscan_gpio_configure_##n, \ .enable_callback = kscan_gpio_enable_##n, \ - .disable_callback = kscan_gpio_disable_interrupts_##n, \ + .disable_callback = kscan_gpio_disable_##n, \ }; \ static const struct kscan_gpio_config_##n kscan_gpio_config_##n = { \ .rows = {UTIL_LISTIFY(INST_MATRIX_ROWS(n), _KSCAN_GPIO_ROW_CFG_INIT, n)}, \ diff --git a/app/dts/bindings/behaviors/zmk,behavior-sensor-rotate-key-press.yaml b/app/dts/bindings/behaviors/zmk,behavior-sensor-rotate-key-press.yaml index bbf3537..6b33910 100644 --- a/app/dts/bindings/behaviors/zmk,behavior-sensor-rotate-key-press.yaml +++ b/app/dts/bindings/behaviors/zmk,behavior-sensor-rotate-key-press.yaml @@ -1,4 +1,4 @@ -# Copyright (c) 2020, Pete Johanson +# Copyright (c) 2020, The ZMK Contributors # SPDX-License-Identifier: MIT description: Sensor rotate key press/release behavior diff --git a/app/dts/bindings/zmk,ext-power-generic.yaml b/app/dts/bindings/zmk,ext-power-generic.yaml new file mode 100644 index 0000000..5a38a09 --- /dev/null +++ b/app/dts/bindings/zmk,ext-power-generic.yaml @@ -0,0 +1,20 @@ +# +# Copyright (c) 2020, The ZMK Contributors +# SPDX-License-Identifier: MIT +# + +description: | + Generic driver for controlling the external power output + by toggling the control-gpio pin status + (Only in supported hardware) + +compatible: "zmk,ext-power-generic" + +properties: + control-gpios: + type: phandle-array + required: true + label: + type: string + required: true + diff --git a/app/dts/bindings/zmk,keymap-sensors.yaml b/app/dts/bindings/zmk,keymap-sensors.yaml index c56361d..86ae5c2 100644 --- a/app/dts/bindings/zmk,keymap-sensors.yaml +++ b/app/dts/bindings/zmk,keymap-sensors.yaml @@ -1,3 +1,8 @@ +# +# Copyright (c) 2020, The ZMK Contributors +# SPDX-License-Identifier: MIT +# + description: | Allows defining the collection of sensors bound in the keymap layers diff --git a/app/include/drivers/ext_power.h b/app/include/drivers/ext_power.h new file mode 100644 index 0000000..6c1923e --- /dev/null +++ b/app/include/drivers/ext_power.h @@ -0,0 +1,104 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#pragma once + +#include <zephyr/types.h> +#include <stddef.h> +#include <device.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @cond INTERNAL_HIDDEN + * + * Behavior driver API definition and system call entry points. + * + * (Internal use only.) + */ + +typedef int (*ext_power_enable_t)(struct device *dev); +typedef int (*ext_power_disable_t)(struct device *dev); +typedef int (*ext_power_get_t)(struct device *dev); + +__subsystem struct ext_power_api { + ext_power_enable_t enable; + ext_power_disable_t disable; + ext_power_get_t get; +}; +/** + * @endcond + */ + +/** + * @brief Enable the external power output + * @param dev Pointer to the device structure for the driver instance. + * + * @retval 0 If successful. + * @retval Negative errno code if failure. + */ +__syscall int ext_power_enable(struct device *dev); + +static inline int z_impl_ext_power_enable(struct device *dev) { + const struct ext_power_api *api = (const struct ext_power_api *)dev->driver_api; + + if (api->enable == NULL) { + return -ENOTSUP; + } + + return api->enable(dev); +} + +/** + * @brief Disable the external power output + * @param dev Pointer to the device structure for the driver instance. + * + * @retval 0 If successful. + * @retval Negative errno code if failure. + */ +__syscall int ext_power_disable(struct device *dev); + +static inline int z_impl_ext_power_disable(struct device *dev) { + const struct ext_power_api *api = (const struct ext_power_api *)dev->driver_api; + + if (api->disable == NULL) { + return -ENOTSUP; + } + + return api->disable(dev); +} + +/** + * @brief Get the current status of the external power output + * @param dev Pointer to the device structure for the driver instance. + * + * @retval 0 If ext power is disabled. + * @retval 1 if ext power is enabled. + * @retval Negative errno code if failure. + */ +__syscall int ext_power_get(struct device *dev); + +static inline int z_impl_ext_power_get(struct device *dev) { + const struct ext_power_api *api = (const struct ext_power_api *)dev->driver_api; + + if (api->get == NULL) { + return -ENOTSUP; + } + + return api->get(dev); +} + +#ifdef __cplusplus +} +#endif + +/** + * @} + */ + +#include <syscalls/ext_power.h> diff --git a/app/include/dt-bindings/zmk/bt.h b/app/include/dt-bindings/zmk/bt.h index 05fd65c..a403d35 100644 --- a/app/include/dt-bindings/zmk/bt.h +++ b/app/include/dt-bindings/zmk/bt.h @@ -18,4 +18,4 @@ defines these aliases up front. #define BT_CLR BT_CLR_CMD 0 #define BT_NXT BT_NXT_CMD 0 #define BT_PRV BT_PRV_CMD 0 -#define BT_SEL BT_SEL_CMD
\ No newline at end of file +#define BT_SEL BT_SEL_CMD diff --git a/app/include/dt-bindings/zmk/keys.h b/app/include/dt-bindings/zmk/keys.h index d3dd634..a3b2229 100644 --- a/app/include/dt-bindings/zmk/keys.h +++ b/app/include/dt-bindings/zmk/keys.h @@ -1,3 +1,8 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ #pragma once diff --git a/app/include/dt-bindings/zmk/kscan-mock.h b/app/include/dt-bindings/zmk/kscan-mock.h index d481899..eff218b 100644 --- a/app/include/dt-bindings/zmk/kscan-mock.h +++ b/app/include/dt-bindings/zmk/kscan-mock.h @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #pragma once #define ZMK_MOCK_IS_PRESS(v) ((v & (0x01 << 31)) != 0) diff --git a/app/include/dt-bindings/zmk/matrix-transform.h b/app/include/dt-bindings/zmk/matrix-transform.h index 4fd3e6c..2989cb6 100644 --- a/app/include/dt-bindings/zmk/matrix-transform.h +++ b/app/include/dt-bindings/zmk/matrix-transform.h @@ -1,3 +1,8 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ #define KT_ROW(item) (item >> 8) #define KT_COL(item) (item & 0xFF) diff --git a/app/include/dt-bindings/zmk/rgb.h b/app/include/dt-bindings/zmk/rgb.h index c2efda8..eb72180 100644 --- a/app/include/dt-bindings/zmk/rgb.h +++ b/app/include/dt-bindings/zmk/rgb.h @@ -1,3 +1,8 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ #define RGB_TOG 0 #define RGB_HUI 1 diff --git a/app/include/zmk/split/bluetooth/service.h b/app/include/zmk/split/bluetooth/service.h index 954e0cd..c2be512 100644 --- a/app/include/zmk/split/bluetooth/service.h +++ b/app/include/zmk/split/bluetooth/service.h @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #pragma once int zmk_split_bt_position_pressed(u8_t position); diff --git a/app/include/zmk/split/bluetooth/uuid.h b/app/include/zmk/split/bluetooth/uuid.h index a8dfbf6..a31884d 100644 --- a/app/include/zmk/split/bluetooth/uuid.h +++ b/app/include/zmk/split/bluetooth/uuid.h @@ -1,3 +1,9 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + #pragma once #include <bluetooth/uuid.h> diff --git a/app/include/zmk/usb_hid.h b/app/include/zmk/usb.h index 7ee2629..452fd54 100644 --- a/app/include/zmk/usb_hid.h +++ b/app/include/zmk/usb.h @@ -12,6 +12,8 @@ #include <zmk/keys.h> #include <zmk/hid.h> -int zmk_usb_hid_init(); +enum usb_dc_status_code zmk_usb_get_status(); +#ifdef CONFIG_ZMK_USB int zmk_usb_hid_send_report(u8_t *report, size_t len); +#endif /* CONFIG_ZMK_USB */
\ No newline at end of file diff --git a/app/src/endpoints.c b/app/src/endpoints.c index ae78587..79d294e 100644 --- a/app/src/endpoints.c +++ b/app/src/endpoints.c @@ -6,7 +6,7 @@ #include <zmk/endpoints.h> #include <zmk/hid.h> -#include <zmk/usb_hid.h> +#include <zmk/usb.h> #include <zmk/hog.h> #include <logging/log.h> diff --git a/app/src/ext_power_generic.c b/app/src/ext_power_generic.c new file mode 100644 index 0000000..4817030 --- /dev/null +++ b/app/src/ext_power_generic.c @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#define DT_DRV_COMPAT zmk_ext_power_generic + +#include <device.h> +#include <init.h> +#include <drivers/gpio.h> +#include <drivers/ext_power.h> + +#if DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT) + +#include <logging/log.h> +LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL); + +struct ext_power_generic_config { + const char *label; + const u8_t pin; + const u8_t flags; +}; + +struct ext_power_generic_data { + struct device *gpio; + bool status; +}; + +static int ext_power_generic_enable(struct device *dev) { + struct ext_power_generic_data *data = dev->driver_data; + const struct ext_power_generic_config *config = dev->config_info; + + if (gpio_pin_set(data->gpio, config->pin, 1)) { + LOG_WRN("Failed to set ext-power control pin"); + return -EIO; + } + data->status = true; + return 0; +} + +static int ext_power_generic_disable(struct device *dev) { + struct ext_power_generic_data *data = dev->driver_data; + const struct ext_power_generic_config *config = dev->config_info; + + if (gpio_pin_set(data->gpio, config->pin, 0)) { + LOG_WRN("Failed to clear ext-power control pin"); + return -EIO; + } + data->status = false; + return 0; +} + +static int ext_power_generic_get(struct device *dev) { + struct ext_power_generic_data *data = dev->driver_data; + return data->status; +} + +static int ext_power_generic_init(struct device *dev) { + struct ext_power_generic_data *data = dev->driver_data; + const struct ext_power_generic_config *config = dev->config_info; + + data->gpio = device_get_binding(config->label); + if (data->gpio == NULL) { + LOG_ERR("Failed to get ext-power control device"); + return -EINVAL; + } + + if (gpio_pin_configure(data->gpio, config->pin, config->flags | GPIO_OUTPUT)) { + LOG_ERR("Failed to configure ext-power control pin"); + return -EIO; + } + + return 0; +} + +static const struct ext_power_generic_config config = { + .label = DT_INST_GPIO_LABEL(0, control_gpios), + .pin = DT_INST_GPIO_PIN(0, control_gpios), + .flags = DT_INST_GPIO_FLAGS(0, control_gpios)}; + +static struct ext_power_generic_data data = {.status = false}; + +static const struct ext_power_api api = {.enable = ext_power_generic_enable, + .disable = ext_power_generic_disable, + .get = ext_power_generic_get}; + +DEVICE_AND_API_INIT(ext_power_generic, DT_INST_LABEL(0), ext_power_generic_init, &data, &config, + APPLICATION, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, &api); + +#endif /* DT_HAS_COMPAT_STATUS_OKAY(DT_DRV_COMPAT) */ diff --git a/app/src/kscan_composite.c b/app/src/kscan_composite.c index 0249140..f8e8d60 100644 --- a/app/src/kscan_composite.c +++ b/app/src/kscan_composite.c @@ -38,8 +38,7 @@ struct kscan_composite_data { }; static int kscan_composite_enable_callback(struct device *dev) { - for (int i = 0; i < sizeof(kscan_composite_children) / sizeof(kscan_composite_children[0]); - i++) { + for (int i = 0; i < ARRAY_SIZE(kscan_composite_children); i++) { const struct kscan_composite_child_config *cfg = &kscan_composite_children[i]; kscan_enable_callback(device_get_binding(cfg->label)); @@ -48,8 +47,7 @@ static int kscan_composite_enable_callback(struct device *dev) { } static int kscan_composite_disable_callback(struct device *dev) { - for (int i = 0; i < sizeof(kscan_composite_children) / sizeof(kscan_composite_children[0]); - i++) { + for (int i = 0; i < ARRAY_SIZE(kscan_composite_children); i++) { const struct kscan_composite_child_config *cfg = &kscan_composite_children[i]; kscan_disable_callback(device_get_binding(cfg->label)); @@ -63,8 +61,7 @@ static void kscan_composite_child_callback(struct device *child_dev, u32_t row, struct device *dev = device_get_binding(DT_INST_LABEL(0)); struct kscan_composite_data *data = dev->driver_data; - for (int i = 0; i < sizeof(kscan_composite_children) / sizeof(kscan_composite_children[0]); - i++) { + for (int i = 0; i < ARRAY_SIZE(kscan_composite_children); i++) { const struct kscan_composite_child_config *cfg = &kscan_composite_children[i]; if (device_get_binding(cfg->label) != child_dev) { @@ -82,8 +79,7 @@ static int kscan_composite_configure(struct device *dev, kscan_callback_t callba return -EINVAL; } - for (int i = 0; i < sizeof(kscan_composite_children) / sizeof(kscan_composite_children[0]); - i++) { + for (int i = 0; i < ARRAY_SIZE(kscan_composite_children); i++) { const struct kscan_composite_child_config *cfg = &kscan_composite_children[i]; kscan_config(device_get_binding(cfg->label), &kscan_composite_child_callback); diff --git a/app/src/main.c b/app/src/main.c index dca923e..0551356 100644 --- a/app/src/main.c +++ b/app/src/main.c @@ -15,16 +15,25 @@ LOG_MODULE_REGISTER(zmk, CONFIG_ZMK_LOG_LEVEL); #include <zmk/matrix.h> #include <zmk/kscan.h> #include <zmk/display.h> +#include <drivers/ext_power.h> #define ZMK_KSCAN_DEV DT_LABEL(ZMK_MATRIX_NODE_ID) void main(void) { + struct device *ext_power; LOG_INF("Welcome to ZMK!\n"); if (zmk_kscan_init(ZMK_KSCAN_DEV) != 0) { return; } + // Enable the external VCC output + ext_power = device_get_binding("EXT_POWER"); + if (ext_power != NULL) { + const struct ext_power_api *ext_power_api = ext_power->driver_api; + ext_power_api->enable(ext_power); + } + #ifdef CONFIG_ZMK_DISPLAY zmk_display_init(); diff --git a/app/src/power.c b/app/src/power.c new file mode 100644 index 0000000..73b3f12 --- /dev/null +++ b/app/src/power.c @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2020 The ZMK Contributors + * + * SPDX-License-Identifier: MIT + */ + +#include <zephyr.h> +#include <kernel.h> +#include <power/power.h> + +#include <logging/log.h> + +LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL); + +#include <zmk/usb.h> +#include <zmk/event-manager.h> +#include <zmk/events/position-state-changed.h> +#include <zmk/events/sensor-event.h> + +static u32_t power_last_uptime; + +#define MAX_IDLE_MS CONFIG_ZMK_IDLE_SLEEP_TIMEOUT + +bool is_usb_power_present() { +#ifdef CONFIG_USB + enum usb_dc_status_code usb_status = zmk_usb_get_status(); + switch (usb_status) { + case USB_DC_DISCONNECTED: + case USB_DC_UNKNOWN: + return false; + default: + return true; + } +#else + return false; +#endif /* CONFIG_USB */ +} + +enum power_states sys_pm_policy_next_state(s32_t ticks) { +#ifdef CONFIG_SYS_POWER_DEEP_SLEEP_STATES +#ifdef CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_1 + s32_t current = k_uptime_get(); + if (power_last_uptime > 0 && !is_usb_power_present() && + current - power_last_uptime > MAX_IDLE_MS) { + return SYS_POWER_STATE_DEEP_SLEEP_1; + } +#endif /* CONFIG_HAS_SYS_POWER_STATE_DEEP_SLEEP_1 */ +#endif /* CONFIG_SYS_POWER_DEEP_SLEEP_STATES */ + + return SYS_POWER_STATE_ACTIVE; +} + +int power_event_listener(const struct zmk_event_header *eh) { + power_last_uptime = k_uptime_get(); + + return 0; +} + +int power_init() { + power_last_uptime = k_uptime_get(); + + return 0; +} + +ZMK_LISTENER(power, power_event_listener); +ZMK_SUBSCRIPTION(power, position_state_changed); +ZMK_SUBSCRIPTION(power, sensor_event); + +SYS_INIT(power_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY);
\ No newline at end of file diff --git a/app/src/usb_hid.c b/app/src/usb.c index 530ffea..434b3d4 100644 --- a/app/src/usb_hid.c +++ b/app/src/usb.c @@ -18,6 +18,8 @@ LOG_MODULE_DECLARE(zmk, CONFIG_ZMK_LOG_LEVEL); static enum usb_dc_status_code usb_status = USB_DC_UNKNOWN; +#ifdef CONFIG_ZMK_USB + static struct device *hid_dev; static K_SEM_DEFINE(hid_sem, 1, 1); @@ -49,11 +51,16 @@ int zmk_usb_hid_send_report(const u8_t *report, size_t len) { } } -void usb_hid_status_cb(enum usb_dc_status_code status, const u8_t *params) { usb_status = status; }; +#endif /* CONFIG_ZMK_USB */ + +enum usb_dc_status_code zmk_usb_get_status() { return usb_status; } -static int zmk_usb_hid_init(struct device *_arg) { +void usb_status_cb(enum usb_dc_status_code status, const u8_t *params) { usb_status = status; }; + +static int zmk_usb_init(struct device *_arg) { int usb_enable_ret; +#ifdef CONFIG_ZMK_USB hid_dev = device_get_binding("HID_0"); if (hid_dev == NULL) { LOG_ERR("Unable to locate HID device"); @@ -64,7 +71,9 @@ static int zmk_usb_hid_init(struct device *_arg) { usb_hid_init(hid_dev); - usb_enable_ret = usb_enable(usb_hid_status_cb); +#endif /* CONFIG_ZMK_USB */ + + usb_enable_ret = usb_enable(usb_status_cb); if (usb_enable_ret != 0) { LOG_ERR("Unable to enable USB"); @@ -74,4 +83,4 @@ static int zmk_usb_hid_init(struct device *_arg) { return 0; } -SYS_INIT(zmk_usb_hid_init, APPLICATION, CONFIG_ZMK_USB_INIT_PRIORITY); +SYS_INIT(zmk_usb_init, APPLICATION, CONFIG_ZMK_USB_INIT_PRIORITY); |