diff options
Diffstat (limited to 'app/drivers/zephyr/ec11_trigger.c')
| -rw-r--r-- | app/drivers/zephyr/ec11_trigger.c | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/app/drivers/zephyr/ec11_trigger.c b/app/drivers/zephyr/ec11_trigger.c new file mode 100644 index 0000000..07493fb --- /dev/null +++ b/app/drivers/zephyr/ec11_trigger.c @@ -0,0 +1,210 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#define DT_DRV_COMPAT alps_ec11 + +#include <device.h> +#include <drivers/gpio.h> +#include <sys/util.h> +#include <kernel.h> +#include <drivers/sensor.h> + +#include "ec11.h" + +extern struct ec11_data ec11_driver; + +#include <logging/log.h> +LOG_MODULE_DECLARE(EC11, CONFIG_SENSOR_LOG_LEVEL); + +static inline void setup_int(struct device *dev, + bool enable) +{ + struct ec11_data *data = dev->driver_data; + const struct ec11_config *cfg = dev->config_info; + + LOG_DBG("enabled %s", (enable ? "true" : "false")); + + if (gpio_pin_interrupt_configure(data->a, + cfg->a_pin, + enable + ? GPIO_INT_EDGE_BOTH + : GPIO_INT_DISABLE)) { + LOG_WRN("Unable to set A pin GPIO interrupt"); + } + + if (gpio_pin_interrupt_configure(data->b, + cfg->b_pin, + enable + ? GPIO_INT_EDGE_BOTH + : GPIO_INT_DISABLE)) { + LOG_WRN("Unable to set A pin GPIO interrupt"); + } +} + +static void ec11_a_gpio_callback(struct device *dev, + struct gpio_callback *cb, u32_t pins) +{ + struct ec11_data *drv_data = + CONTAINER_OF(cb, struct ec11_data, a_gpio_cb); + + LOG_DBG(""); + + setup_int(drv_data->dev, false); + +#if defined(CONFIG_EC11_TRIGGER_OWN_THREAD) + k_sem_give(&drv_data->gpio_sem); +#elif defined(CONFIG_EC11_TRIGGER_GLOBAL_THREAD) + k_work_submit(&drv_data->work); +#endif +} + +static void ec11_b_gpio_callback(struct device *dev, + struct gpio_callback *cb, u32_t pins) +{ + struct ec11_data *drv_data = + CONTAINER_OF(cb, struct ec11_data, b_gpio_cb); + + LOG_DBG(""); + + setup_int(drv_data->dev, false); + +#if defined(CONFIG_EC11_TRIGGER_OWN_THREAD) + k_sem_give(&drv_data->gpio_sem); +#elif defined(CONFIG_EC11_TRIGGER_GLOBAL_THREAD) + k_work_submit(&drv_data->work); +#endif +} + +static void ec11_thread_cb(void *arg) +{ + struct device *dev = arg; + struct ec11_data *drv_data = dev->driver_data; + const struct ec11_config *cfg = dev->config_info; + u16_t status; + + drv_data->handler(dev, &drv_data->trigger); + // gpio_pin_get(drv_data->a, cfg->a_pin) + + // if (ec11_reg_read(drv_data, EC11_REG_STATUS, &status) < 0) { + // return; + // } + + // if (status & EC11_DATA_READY_INT_BIT && + // drv_data->drdy_handler != NULL) { + // drv_data->drdy_handler(dev, &drv_data->drdy_trigger); + // } + + // if (status & EC11_TOBJ_TH_INT_BITS && + // drv_data->th_handler != NULL) { + // drv_data->th_handler(dev, &drv_data->th_trigger); + // } + + setup_int(dev, true); +} + +#ifdef CONFIG_EC11_TRIGGER_OWN_THREAD +static void ec11_thread(int dev_ptr, int unused) +{ + struct device *dev = INT_TO_POINTER(dev_ptr); + struct ec11_data *drv_data = dev->driver_data; + + ARG_UNUSED(unused); + + while (1) { + k_sem_take(&drv_data->gpio_sem, K_FOREVER); + ec11_thread_cb(dev); + } +} +#endif + +#ifdef CONFIG_EC11_TRIGGER_GLOBAL_THREAD +static void ec11_work_cb(struct k_work *work) +{ + struct ec11_data *drv_data = + CONTAINER_OF(work, struct ec11_data, work); + + LOG_DBG(""); + + ec11_thread_cb(drv_data->dev); +} +#endif + +int ec11_trigger_set(struct device *dev, + const struct sensor_trigger *trig, + sensor_trigger_handler_t handler) +{ + struct ec11_data *drv_data = dev->driver_data; + + setup_int(dev, false); + + k_msleep(5); + + drv_data->trigger = *trig; + drv_data->handler = handler; + + setup_int(dev, true); + + return 0; +} + +int ec11_init_interrupt(struct device *dev) +{ + struct ec11_data *drv_data = dev->driver_data; + const struct ec11_config *drv_cfg = dev->config_info; + + drv_data->dev = dev; + /* setup gpio interrupt */ + + LOG_DBG("A: %s %d B: %s %d", drv_cfg->a_label, drv_cfg->a_pin, drv_cfg->b_label, drv_cfg->b_pin); + + if (gpio_pin_configure(drv_data->a, drv_cfg->a_pin, + drv_cfg->a_flags + | GPIO_INPUT)) { + LOG_DBG("Failed to configure B pin"); + return -EIO; + } + + gpio_init_callback(&drv_data->a_gpio_cb, + ec11_a_gpio_callback, + BIT(drv_cfg->a_pin)); + + if (gpio_add_callback(drv_data->a, &drv_data->a_gpio_cb) < 0) { + LOG_DBG("Failed to set A callback!"); + return -EIO; + } + + if (gpio_pin_configure(drv_data->b, drv_cfg->b_pin, + drv_cfg->b_flags + | GPIO_INPUT)) { + LOG_DBG("Failed to configure B pin"); + return -EIO; + } + + gpio_init_callback(&drv_data->b_gpio_cb, + ec11_b_gpio_callback, + BIT(drv_cfg->b_pin)); + + if (gpio_add_callback(drv_data->b, &drv_data->b_gpio_cb) < 0) { + LOG_DBG("Failed to set B callback!"); + return -EIO; + } + + LOG_DBG("A Pin? %d, B Pin? %d", gpio_pin_get(drv_data->a, drv_cfg->a_pin), gpio_pin_get(drv_data->b, drv_cfg->b_pin)); + +#if defined(CONFIG_EC11_TRIGGER_OWN_THREAD) + k_sem_init(&drv_data->gpio_sem, 0, UINT_MAX); + + k_thread_create(&drv_data->thread, drv_data->thread_stack, + CONFIG_EC11_THREAD_STACK_SIZE, + (k_thread_entry_t)ec11_thread, dev, + 0, NULL, K_PRIO_COOP(CONFIG_EC11_THREAD_PRIORITY), + 0, K_NO_WAIT); +#elif defined(CONFIG_EC11_TRIGGER_GLOBAL_THREAD) + k_work_init(&drv_data->work, ec11_work_cb); +#endif + + return 0; +} |