diff options
Diffstat (limited to 'app/boards')
49 files changed, 1036 insertions, 38 deletions
diff --git a/app/boards/arm/bluemicro840/CMakeLists.txt b/app/boards/arm/bluemicro840/CMakeLists.txt new file mode 100644 index 0000000..00952c3 --- /dev/null +++ b/app/boards/arm/bluemicro840/CMakeLists.txt @@ -0,0 +1,8 @@ +set_property(GLOBAL APPEND PROPERTY extra_post_build_commands + COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py + -c + -b 0x26000 + -f 0xADA52840 + -o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2 + ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin +) diff --git a/app/boards/arm/bluemicro840/Kconfig b/app/boards/arm/bluemicro840/Kconfig new file mode 100644 index 0000000..0e6743d --- /dev/null +++ b/app/boards/arm/bluemicro840/Kconfig @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: MIT + +config BOARD_ENABLE_DCDC + bool "Enable DCDC mode" + select SOC_DCDC_NRF52X + default y + depends on BOARD_BLUEMICRO840_V1 + diff --git a/app/boards/arm/bluemicro840/Kconfig.board b/app/boards/arm/bluemicro840/Kconfig.board new file mode 100644 index 0000000..bc271af --- /dev/null +++ b/app/boards/arm/bluemicro840/Kconfig.board @@ -0,0 +1,8 @@ +# BlueMicro840 board configuration + +# Copyright (c) 2020 Pete Johanson, Derek Schmell +# SPDX-License-Identifier: MIT + +config BOARD_BLUEMICRO840_V1 + bool "BlueMicro840_V1" + depends on SOC_NRF52840_QIAA diff --git a/app/boards/arm/bluemicro840/Kconfig.defconfig b/app/boards/arm/bluemicro840/Kconfig.defconfig new file mode 100644 index 0000000..566b5a4 --- /dev/null +++ b/app/boards/arm/bluemicro840/Kconfig.defconfig @@ -0,0 +1,30 @@ +# BlueMicro840 board configuration + +# Copyright (c) 2020 Pete Johanson, Derek Schmell +# SPDX-License-Identifier: MIT + +if BOARD_BLUEMICRO840_V1 + +config BOARD + default "bluemicro840_v1" + +if USB + +config USB_NRFX + default y + +config USB_DEVICE_STACK + default y + +endif # USB + +config BT_CTLR + default BT + +config ZMK_BLE + default y + +config ZMK_USB + default y + +endif # BOARD_BLUEMICRO840_V1 diff --git a/app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi b/app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi new file mode 100644 index 0000000..940d891 --- /dev/null +++ b/app/boards/arm/bluemicro840/arduino_pro_micro_pins.dtsi @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2020 Derek Schmell + * + * SPDX-License-Identifier: MIT + */ + +/ { + pro_micro_d: connector_d { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 8 0> /* D0 D2 */ + , <1 0 &gpio0 6 0> /* D1 D3*/ + , <2 0 &gpio0 15 0> /* D2 D1*/ + , <3 0 &gpio0 17 0> /* D3 D0*/ + , <4 0 &gpio0 20 0> /* D4/A6 D4*/ + , <5 0 &gpio0 13 0> /* D5 C6*/ + , <6 0 &gpio0 24 0> /* D6/A7 D7*/ + , <7 0 &gpio0 9 0> /* D7 E6*/ + , <8 0 &gpio0 10 0> /* D8/A8 B4*/ + , <9 0 &gpio1 6 0> /* D9/A9 B5*/ + , <10 0 &gpio1 11 0> /* D10/A10 B6*/ + , <16 0 &gpio0 28 0> /* D16 B2*/ + , <14 0 &gpio0 3 0> /* D14 B3*/ + , <15 0 &gpio1 13 0> /* D15 B1*/ + ; + }; + + pro_micro_a: connector_a { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 2 0> /* A0 F7*/ + , <1 0 &gpio0 29 0> /* A1 F6*/ + , <2 0 &gpio0 26 0> /* A2 F5*/ + , <3 0 &gpio0 30 0> /* A3 F4*/ + , <6 0 &gpio0 20 0> /* D4/A6 D4*/ + , <7 0 &gpio0 24 0> /* D6/A7 D7*/ + , <8 0 &gpio0 10 0> /* D8/A8 B4*/ + , <9 0 &gpio1 6 0> /* D9/A9 B5*/ + , <10 0 &gpio1 13 0> /* D10/A10 B6*/ + ; + }; +}; + +pro_micro_i2c: &i2c0 {}; +pro_micro_spi: &spi0 {}; +pro_micro_serial: &uart0 {}; diff --git a/app/boards/arm/bluemicro840/bluemicro840_v1.dts b/app/boards/arm/bluemicro840/bluemicro840_v1.dts new file mode 100644 index 0000000..c693662 --- /dev/null +++ b/app/boards/arm/bluemicro840/bluemicro840_v1.dts @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2020 Pete Johanson, Derek Schmell + * + * SPDX-License-Identifier: MIT + */ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> +#include "arduino_pro_micro_pins.dtsi" + +/ { + model = "BlueMicro840_V1"; + compatible = "bluemicro840,v1"; + + chosen { + zephyr,code-partition = &code_partition; + // zephyr,console = &uart0; + //zephyr,bt-mon-uart = &uart0; + //zephyr,bt-c2h-uart = &uart0; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + }; + + leds { + compatible = "gpio-leds"; + blue_led: led_0 { + gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + compatible = "nordic,nrf-twi"; + sda-pin = <15>; + scl-pin = <17>; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + tx-pin = <39>; + rx-pin = <34>; + rts-pin = <33>; + cts-pin = <12>; +}; + +&usbd { + status = "okay"; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot_partition: partition@0 { + label = "adafruit_boot"; + reg = <0x000000000 0x0000C000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000d2000>; + }; + + /* + * The flash starting at 0x000f8000 and ending at + * 0x000fffff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@f8000 { + label = "storage"; + reg = <0x000f8000 0x00008000>; + }; + }; +}; diff --git a/app/boards/arm/bluemicro840/bluemicro840_v1.yaml b/app/boards/arm/bluemicro840/bluemicro840_v1.yaml new file mode 100644 index 0000000..9e1dd54 --- /dev/null +++ b/app/boards/arm/bluemicro840/bluemicro840_v1.yaml @@ -0,0 +1,15 @@ +identifier: bluemicro840_v1 +name: BlueMicro840_V1 +type: mcu +arch: arm +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - usb_device + - ble + - ieee802154 + - pwm + - watchdog diff --git a/app/boards/arm/bluemicro840/bluemicro840_v1_defconfig b/app/boards/arm/bluemicro840/bluemicro840_v1_defconfig new file mode 100644 index 0000000..96f03ca --- /dev/null +++ b/app/boards/arm/bluemicro840/bluemicro840_v1_defconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: MIT + +CONFIG_SOC_SERIES_NRF52X=y +CONFIG_SOC_NRF52840_QIAA=y +CONFIG_BOARD_BLUEMICRO840_V1=y + +# Enable MPU +CONFIG_ARM_MPU=y + +# enable GPIO +CONFIG_GPIO=y + +CONFIG_USE_DT_CODE_PARTITION=y + +CONFIG_MPU_ALLOW_FLASH_WRITE=y +CONFIG_NVS=y +CONFIG_SETTINGS_NVS=y +CONFIG_FLASH=y +CONFIG_FLASH_PAGE_LAYOUT=y +CONFIG_FLASH_MAP=y
\ No newline at end of file diff --git a/app/boards/arm/bluemicro840/board.cmake b/app/boards/arm/bluemicro840/board.cmake new file mode 100644 index 0000000..fa847d5 --- /dev/null +++ b/app/boards/arm/bluemicro840/board.cmake @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: MIT + +board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset") +include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake) +include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake) diff --git a/app/boards/arm/nice_nano/Kconfig b/app/boards/arm/nice_nano/Kconfig new file mode 100644 index 0000000..fb5537a --- /dev/null +++ b/app/boards/arm/nice_nano/Kconfig @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: MIT + +config BOARD_ENABLE_DCDC + bool "Enable DCDC mode" + select SOC_DCDC_NRF52X + default y + depends on BOARD_NICE_NANO diff --git a/app/boards/arm/nice_nano/Kconfig.board b/app/boards/arm/nice_nano/Kconfig.board index 60ee58b..4fd394f 100644 --- a/app/boards/arm/nice_nano/Kconfig.board +++ b/app/boards/arm/nice_nano/Kconfig.board @@ -6,3 +6,4 @@ config BOARD_NICE_NANO bool "nice!nano" depends on SOC_NRF52840_QIAA + diff --git a/app/boards/arm/nice_nano/Kconfig.defconfig b/app/boards/arm/nice_nano/Kconfig.defconfig index 2431813..0961ddd 100644 --- a/app/boards/arm/nice_nano/Kconfig.defconfig +++ b/app/boards/arm/nice_nano/Kconfig.defconfig @@ -1,5 +1,3 @@ -# Electronut Labs Papyr board configuration - # Copyright (c) 2020 Pete Johanson # SPDX-License-Identifier: MIT diff --git a/app/boards/arm/nice_nano/nice_nano.dts b/app/boards/arm/nice_nano/nice_nano.dts index 7c676e3..2e9556b 100644 --- a/app/boards/arm/nice_nano/nice_nano.dts +++ b/app/boards/arm/nice_nano/nice_nano.dts @@ -24,7 +24,7 @@ leds { compatible = "gpio-leds"; blue_led: led_0 { - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; label = "Blue LED"; }; }; @@ -39,13 +39,6 @@ status = "okay"; }; -&uart0 { - compatible = "nordic,nrf-uart"; - current-speed = <115200>; - tx-pin = <6>; - rx-pin = <8>; -}; - &i2c0 { compatible = "nordic,nrf-twi"; sda-pin = <17>; diff --git a/app/boards/arm/nrfmicro/CMakeLists.txt b/app/boards/arm/nrfmicro/CMakeLists.txt new file mode 100644 index 0000000..cd4843a --- /dev/null +++ b/app/boards/arm/nrfmicro/CMakeLists.txt @@ -0,0 +1,14 @@ +set_property(GLOBAL APPEND PROPERTY extra_post_build_commands + COMMAND ${PYTHON_EXECUTABLE} ${ZEPHYR_BASE}/../tools/uf2/utils/uf2conv.py + -c + -b 0x26000 + -f 0xADA52840 + -o ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.uf2 + ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.bin +) + +if(CONFIG_PINMUX) +zephyr_library() +zephyr_library_sources(pinmux.c) +zephyr_library_include_directories(${ZEPHYR_BASE}/drivers) +endif()
\ No newline at end of file diff --git a/app/boards/arm/nrfmicro/Kconfig b/app/boards/arm/nrfmicro/Kconfig new file mode 100644 index 0000000..17a3347 --- /dev/null +++ b/app/boards/arm/nrfmicro/Kconfig @@ -0,0 +1,5 @@ +config BOARD_ENABLE_DCDC + bool "Enable DCDC mode" + select SOC_DCDC_NRF52X + default y + depends on (BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13) diff --git a/app/boards/arm/nrfmicro/Kconfig.board b/app/boards/arm/nrfmicro/Kconfig.board new file mode 100644 index 0000000..177373a --- /dev/null +++ b/app/boards/arm/nrfmicro/Kconfig.board @@ -0,0 +1,16 @@ +# nrfmicro board configuration + +# Copyright (c) 2020 Okke Formsma, joric +# SPDX-License-Identifier: MIT + +config BOARD_NRFMICRO_11 + bool "nrfmicro_11" + depends on SOC_NRF52840_QIAA + +config BOARD_NRFMICRO_11_FLIPPED + bool "nrfmicro_11_flipped" + depends on SOC_NRF52840_QIAA + +config BOARD_NRFMICRO_13 + bool "nrfmicro_13" + depends on SOC_NRF52840_QIAA diff --git a/app/boards/arm/nrfmicro/Kconfig.defconfig b/app/boards/arm/nrfmicro/Kconfig.defconfig new file mode 100644 index 0000000..2212277 --- /dev/null +++ b/app/boards/arm/nrfmicro/Kconfig.defconfig @@ -0,0 +1,33 @@ +# Electronut Labs Papyr board configuration + +# Copyright (c) 2020 Okke Formsma, joric +# SPDX-License-Identifier: MIT + +if BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13 + +config BOARD + default "nrfmicro" + +if USB + +config USB_NRFX + default y + +config USB_DEVICE_STACK + default y + +endif # USB + +config BT_CTLR + default BT + +config ZMK_BLE + default y + +config ZMK_USB + default y + +config PINMUX + default y + +endif # BOARD_NRFMICRO_11 || BOARD_NRFMICRO_11_FLIPPED || BOARD_NRFMICRO_13 diff --git a/app/boards/arm/nrfmicro/arduino_pro_micro_pins.dtsi b/app/boards/arm/nrfmicro/arduino_pro_micro_pins.dtsi new file mode 100644 index 0000000..6cde2b4 --- /dev/null +++ b/app/boards/arm/nrfmicro/arduino_pro_micro_pins.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + + +/ { + pro_micro_d: connector_d { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 8 0> /* D0 */ + , <1 0 &gpio0 6 0> /* D1 */ + , <2 0 &gpio0 15 0> /* D2 */ + , <3 0 &gpio0 17 0> /* D3 */ + , <4 0 &gpio0 20 0> /* D4/A6 */ + , <5 0 &gpio0 13 0> /* D5 */ + , <6 0 &gpio0 24 0> /* D6/A7 */ + , <7 0 &gpio0 9 0> /* D7 */ + , <8 0 &gpio0 10 0> /* D8/A8 */ + , <9 0 &gpio1 6 0> /* D9/A9 */ + , <10 0 &gpio1 11 0> /* D10/A10 */ + , <16 0 &gpio0 28 0> /* D16 */ + , <14 0 &gpio0 3 0> /* D14 */ + , <15 0 &gpio1 13 0> /* D15 */ + ; + }; + + pro_micro_a: connector_a { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 2 0> /* A0 */ + , <1 0 &gpio0 29 0> /* A1 */ + , <2 0 &gpio0 31 0> /* A2 */ + , <3 0 &gpio0 30 0> /* A3 */ + , <6 0 &gpio0 20 0> /* D4/A6 */ + , <7 0 &gpio0 24 0> /* D6/A7 */ + , <8 0 &gpio0 10 0> /* D8/A8 */ + , <9 0 &gpio1 6 0> /* D9/A9 */ + , <10 0 &gpio1 11 0> /* D10/A10 */ + ; + }; +}; + + +pro_micro_i2c: &i2c0 {}; +pro_micro_spi: &spi0 {}; +pro_micro_serial: &uart0 {}; diff --git a/app/boards/arm/nrfmicro/arduino_pro_micro_pins_flipped.dtsi b/app/boards/arm/nrfmicro/arduino_pro_micro_pins_flipped.dtsi new file mode 100644 index 0000000..9bad7f4 --- /dev/null +++ b/app/boards/arm/nrfmicro/arduino_pro_micro_pins_flipped.dtsi @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + +/ { + pro_micro_d: connector_d { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 8 0> /* D0 */ + , <1 0 &gpio0 6 0> /* D1 */ + , <2 0 &gpio0 30 0> /* D2 */ + , <3 0 &gpio0 31 0> /* D3 */ + , <4 0 &gpio0 29 0> /* D4/A6 */ + , <5 0 &gpio0 2 0> /* D5 */ + , <6 0 &gpio1 13 0> /* D6/A7 */ + , <7 0 &gpio0 3 0> /* D7 */ + , <8 0 &gpio0 28 0> /* D8/A8 */ + , <9 0 &gpio1 11 0> /* D9/A9 */ + , <10 0 &gpio1 6 0> /* D10/A10 */ + , <16 0 &gpio0 10 0> /* D16 */ + , <14 0 &gpio0 9 0> /* D14 */ + , <15 0 &gpio0 24 0> /* D15 */ + ; + }; + + pro_micro_a: connector_a { + compatible = "arduino-pro-micro"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map + = <0 0 &gpio0 13 0> /* A0 */ + , <1 0 &gpio0 20 0> /* A1 */ + , <2 0 &gpio0 17 0> /* A2 */ + , <3 0 &gpio0 15 0> /* A3 */ + , <6 0 &gpio0 29 0> /* D4/A6 */ + , <7 0 &gpio1 13 0> /* D6/A7 */ + , <8 0 &gpio0 28 0> /* D8/A8 */ + , <9 0 &gpio1 11 0> /* D9/A9 */ + , <10 0 &gpio1 6 0> /* D10/A10 */ + ; + }; +}; + +pro_micro_i2c: &i2c0 {}; +pro_micro_spi: &spi0 {}; +pro_micro_serial: &uart0 {}; diff --git a/app/boards/arm/nrfmicro/board.cmake b/app/boards/arm/nrfmicro/board.cmake new file mode 100644 index 0000000..fa847d5 --- /dev/null +++ b/app/boards/arm/nrfmicro/board.cmake @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: MIT + +board_runner_args(nrfjprog "--nrf-family=NRF52" "--softreset") +include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake) +include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake) diff --git a/app/boards/arm/nrfmicro/nrfmicro_11.dts b/app/boards/arm/nrfmicro/nrfmicro_11.dts new file mode 100644 index 0000000..dc07ac8 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11.dts @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> +#include "arduino_pro_micro_pins.dtsi" + +/ { + model = "nrfmicro"; + compatible = "joric,nrfmicro"; + + chosen { + zephyr,code-partition = &code_partition; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + }; + + leds { + compatible = "gpio-leds"; + blue_led: led_0 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + compatible = "nordic,nrf-twi"; + sda-pin = <15>; + scl-pin = <17>; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + tx-pin = <39>; + rx-pin = <34>; + rts-pin = <33>; + cts-pin = <12>; +}; + +&usbd { + status = "okay"; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot_partition: partition@0 { + label = "adafruit_boot"; + reg = <0x000000000 0x0000C000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000d2000>; + }; + + /* + * The flash starting at 0x000f8000 and ending at + * 0x000fffff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@f8000 { + label = "storage"; + reg = <0x000f8000 0x00008000>; + }; + }; +}; diff --git a/app/boards/arm/nrfmicro/nrfmicro_11.yaml b/app/boards/arm/nrfmicro/nrfmicro_11.yaml new file mode 100644 index 0000000..4608130 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11.yaml @@ -0,0 +1,15 @@ +identifier: nrfmicro_11 +name: nrfmicro_11 +type: mcu +arch: arm +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - usb_device + - ble + - ieee802154 + - pwm + - watchdog diff --git a/app/boards/arm/nrfmicro/nrfmicro_11_defconfig b/app/boards/arm/nrfmicro/nrfmicro_11_defconfig new file mode 100644 index 0000000..c1ac836 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11_defconfig @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: MIT + +CONFIG_SOC_SERIES_NRF52X=y +CONFIG_SOC_NRF52840_QIAA=y +CONFIG_BOARD_NRFMICRO_11=y + +# Enable MPU +CONFIG_ARM_MPU=y + +# enable GPIO +CONFIG_GPIO=y + +CONFIG_USE_DT_CODE_PARTITION=y + +CONFIG_MPU_ALLOW_FLASH_WRITE=y +CONFIG_NVS=y +CONFIG_SETTINGS_NVS=y +CONFIG_FLASH=y +CONFIG_FLASH_PAGE_LAYOUT=y +CONFIG_FLASH_MAP=y +CONFIG_CLOCK_CONTROL_NRF=y +CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y diff --git a/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts new file mode 100644 index 0000000..5bf493f --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.dts @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> +#include "arduino_pro_micro_pins_flipped.dtsi" + +/ { + model = "nrfmicro"; + compatible = "joric,nrfmicro"; + + chosen { + zephyr,code-partition = &code_partition; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + }; + + leds { + compatible = "gpio-leds"; + blue_led: led_0 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + compatible = "nordic,nrf-twi"; + sda-pin = <30>; + scl-pin = <31>; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + tx-pin = <39>; + rx-pin = <34>; + rts-pin = <33>; + cts-pin = <12>; +}; + +&usbd { + status = "okay"; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot_partition: partition@0 { + label = "adafruit_boot"; + reg = <0x000000000 0x0000C000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000d2000>; + }; + + /* + * The flash starting at 0x000f8000 and ending at + * 0x000fffff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@f8000 { + label = "storage"; + reg = <0x000f8000 0x00008000>; + }; + }; +}; diff --git a/app/boards/arm/nrfmicro/nrfmicro_11_flipped.yaml b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.yaml new file mode 100644 index 0000000..74461f0 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11_flipped.yaml @@ -0,0 +1,15 @@ +identifier: nrfmicro_11_flipped +name: nrfmicro_11_flipped +type: mcu +arch: arm +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - usb_device + - ble + - ieee802154 + - pwm + - watchdog diff --git a/app/boards/arm/nrfmicro/nrfmicro_11_flipped_defconfig b/app/boards/arm/nrfmicro/nrfmicro_11_flipped_defconfig new file mode 100644 index 0000000..b35cb79 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_11_flipped_defconfig @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: MIT + +CONFIG_SOC_SERIES_NRF52X=y +CONFIG_SOC_NRF52840_QIAA=y +CONFIG_BOARD_NRFMICRO_11_FLIPPED=y + +# Enable MPU +CONFIG_ARM_MPU=y + +# enable GPIO +CONFIG_GPIO=y + +CONFIG_USE_DT_CODE_PARTITION=y + +CONFIG_MPU_ALLOW_FLASH_WRITE=y +CONFIG_NVS=y +CONFIG_SETTINGS_NVS=y +CONFIG_FLASH=y +CONFIG_FLASH_PAGE_LAYOUT=y +CONFIG_FLASH_MAP=y +CONFIG_CLOCK_CONTROL_NRF=y +CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y diff --git a/app/boards/arm/nrfmicro/nrfmicro_13.dts b/app/boards/arm/nrfmicro/nrfmicro_13.dts new file mode 100644 index 0000000..dc07ac8 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_13.dts @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + +/dts-v1/; +#include <nordic/nrf52840_qiaa.dtsi> +#include "arduino_pro_micro_pins.dtsi" + +/ { + model = "nrfmicro"; + compatible = "joric,nrfmicro"; + + chosen { + zephyr,code-partition = &code_partition; + zephyr,sram = &sram0; + zephyr,flash = &flash0; + }; + + leds { + compatible = "gpio-leds"; + blue_led: led_0 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + label = "Blue LED"; + }; + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + compatible = "nordic,nrf-twi"; + sda-pin = <15>; + scl-pin = <17>; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + tx-pin = <39>; + rx-pin = <34>; + rts-pin = <33>; + cts-pin = <12>; +}; + +&usbd { + status = "okay"; +}; + + +&flash0 { + /* + * For more information, see: + * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html + */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot_partition: partition@0 { + label = "adafruit_boot"; + reg = <0x000000000 0x0000C000>; + }; + code_partition: partition@26000 { + label = "code_partition"; + reg = <0x00026000 0x000d2000>; + }; + + /* + * The flash starting at 0x000f8000 and ending at + * 0x000fffff is reserved for use by the application. + */ + + /* + * Storage partition will be used by FCB/LittleFS/NVS + * if enabled. + */ + storage_partition: partition@f8000 { + label = "storage"; + reg = <0x000f8000 0x00008000>; + }; + }; +}; diff --git a/app/boards/arm/nrfmicro/nrfmicro_13.yaml b/app/boards/arm/nrfmicro/nrfmicro_13.yaml new file mode 100644 index 0000000..a7415e4 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_13.yaml @@ -0,0 +1,15 @@ +identifier: nrfmicro_13 +name: nrfmicro_13 +type: mcu +arch: arm +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - usb_device + - ble + - ieee802154 + - pwm + - watchdog diff --git a/app/boards/arm/nrfmicro/nrfmicro_13_defconfig b/app/boards/arm/nrfmicro/nrfmicro_13_defconfig new file mode 100644 index 0000000..cac1164 --- /dev/null +++ b/app/boards/arm/nrfmicro/nrfmicro_13_defconfig @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: MIT + +CONFIG_SOC_SERIES_NRF52X=y +CONFIG_SOC_NRF52840_QIAA=y +CONFIG_BOARD_NRFMICRO_13=y + +# Enable MPU +CONFIG_ARM_MPU=y + +# enable GPIO +CONFIG_GPIO=y + +CONFIG_USE_DT_CODE_PARTITION=y + +CONFIG_MPU_ALLOW_FLASH_WRITE=y +CONFIG_NVS=y +CONFIG_SETTINGS_NVS=y +CONFIG_FLASH=y +CONFIG_FLASH_PAGE_LAYOUT=y +CONFIG_FLASH_MAP=y +CONFIG_CLOCK_CONTROL_NRF=y +CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y diff --git a/app/boards/arm/nrfmicro/pinmux.c b/app/boards/arm/nrfmicro/pinmux.c new file mode 100644 index 0000000..c02ca92 --- /dev/null +++ b/app/boards/arm/nrfmicro/pinmux.c @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2020 Okke Formsma, joric + * + * SPDX-License-Identifier: MIT + */ + +#include <kernel.h> +#include <device.h> +#include <init.h> +#include <drivers/gpio.h> +#include <sys/sys_io.h> +#include <devicetree.h> + +static int pinmux_nrfmicro_init(struct device *port) +{ + ARG_UNUSED(port); + + struct device *p1 = device_get_binding("GPIO_1"); + +#if CONFIG_BOARD_NRFMICRO_13 + struct device *p0 = device_get_binding("GPIO_0"); + // enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1) + gpio_pin_configure(p1, 9, GPIO_OUTPUT); + gpio_pin_set(p1, 9, 0); + + // enable charger (nRFMicro 1.3 only) + gpio_pin_configure(p0, 5, GPIO_OUTPUT); + gpio_pin_set(p0, 5, 0); +#else + // enable EXT_VCC (use 0 for nRFMicro 1.3, use 1 for nRFMicro 1.1) + gpio_pin_configure(p1, 9, GPIO_OUTPUT); + gpio_pin_set(p1, 9, 1); +#endif + return 0; +} + +SYS_INIT(pinmux_nrfmicro_init, APPLICATION, CONFIG_APPLICATION_INIT_PRIORITY); diff --git a/app/boards/shields/corne/corne.conf b/app/boards/shields/corne/corne.conf index c8e3c00..b79385b 100644 --- a/app/boards/shields/corne/corne.conf +++ b/app/boards/shields/corne/corne.conf @@ -1,5 +1,6 @@ -# Uncomment the following line to enable the Corne RGB Underglow +# Uncomment the following lines to enable the Corne RGB Underglow # ZMK_RGB_UNDERGLOW=y +# CONFIG_WS2812_STRIP=y # Uncomment the following line to enable the Corne OLED Display # CONFIG_ZMK_DISPLAY=y diff --git a/app/boards/shields/corne/corne.dtsi b/app/boards/shields/corne/corne.dtsi index 70d6495..af14bae 100644 --- a/app/boards/shields/corne/corne.dtsi +++ b/app/boards/shields/corne/corne.dtsi @@ -21,9 +21,9 @@ // | SW13 | SW14 | SW15 | SW16 | SW17 | SW18 | | SW18 | SW17 | SW16 | SW15 | SW14 | SW13 | // | SW19 | SW20 | SW21 | | SW21 | SW20 | SW19 | map = < -RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,12) -RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,12) -RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,12) +RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,5) RC(0,6) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) +RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,6) RC(1,7) RC(1,8) RC(1,9) RC(1,10) RC(1,11) +RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,7) RC(3,8) >; }; @@ -58,13 +58,17 @@ RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10 }; + bt_unpair_combo: bt_unpair_combo { + compatible = "zmk,bt-unpair-combo"; + }; + // TODO: per-key RGB node(s)? }; &pro_micro_i2c { status = "okay"; - ssd1306@3c { + oled: ssd1306@3c { compatible = "solomon,ssd1306fb"; reg = <0x3c>; label = "DISPLAY"; @@ -73,7 +77,10 @@ RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) RC(2,10 segment-offset = <0>; page-offset = <0>; display-offset = <0>; - multiplex-ratio = <63>; + multiplex-ratio = <31>; + segment-remap; + com-invdir; + com-sequential; prechargep = <0x22>; }; }; diff --git a/app/boards/shields/corne/corne.keymap b/app/boards/shields/corne/corne.keymap index 2f7f38b..c0bbb4a 100644 --- a/app/boards/shields/corne/corne.keymap +++ b/app/boards/shields/corne/corne.keymap @@ -2,21 +2,49 @@ #include <dt-bindings/zmk/keys.h> / { - keymap { - compatible = "zmk,keymap"; + keymap { + compatible = "zmk,keymap"; - default_layer { -// --------------------------------------------------------------------------------------------------------------------------------- -// | ESC | Q | W | E | R | T | | Y | U | I | O | P | \ | -// | TAB | A | S | D | F | G | | H | J | K | L | ; | ' | -// | SHIFT | Z | X | C | V | B | | N | M | , | . | / | CTRL | -// | GUI | DEL | RET | | TAB | BSPC | R-ALT | - bindings = < - &kp ESC &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BSLH - &kp TAB &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SCLN &kp QUOT - &kp LSFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &kp FSLH &kp RCTL - &kp LGUI &kp DEL &kp RET &kp TAB &kp BKSP &kp RALT - >; - }; - }; + default_layer { +// ----------------------------------------------------------------------------------------- +// | TAB | Q | W | E | R | T | | Y | U | I | O | P | BKSP | +// | CTRL | A | S | D | F | G | | H | J | K | L | ; | ' | +// | SHFT | Z | X | C | V | B | | N | M | , | . | / | SHFT | +// | GUI | LWR | SPC | | ENT | RSE | ALT | + bindings = < + &kp TAB &kp Q &kp W &kp E &kp R &kp T &kp Y &kp U &kp I &kp O &kp P &kp BKSP + &kp LCTL &kp A &kp S &kp D &kp F &kp G &kp H &kp J &kp K &kp L &kp SCLN &kp QUOT + &kp LSFT &kp Z &kp X &kp C &kp V &kp B &kp N &kp M &kp CMMA &kp DOT &kp FSLH &kp RSFT + &kp LGUI &mo 1 &kp SPC &kp RET &mo 2 &kp RALT + >; + }; + lower_layer { +// ----------------------------------------------------------------------------------------- +// | ESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | BKSP | +// | CTRL | | | | | | | LFT | DWN | UP | RGT | | | +// | SHFT | | | | | | | | | | | | | +// | GUI | | SPC | | ENT | | ALT | + bindings = < + &kp ESC &kp NUM_1 &kp NUM_2 &kp NUM_3 &kp NUM_4 &kp NUM_5 &kp NUM_6 &kp NUM_7 &kp NUM_8 &kp NUM_9 &kp NUM_0 &kp BKSP + &kp LCTL &trans &trans &trans &trans &trans &kp LARW &kp DARW &kp UARW &kp RARW &trans &trans + &kp LSFT &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans + &kp LGUI &trans &kp SPC &kp RET &trans &kp RALT + >; + }; + + raise_layer { +// ----------------------------------------------------------------------------------------- +// | ESC | ! | @ | # | $ | % | | ^ | & | * | ( | ) | BKSP | +// | CTRL | | | | | | | - | = | { | } | "|" | ` | +// | SHFT | | | | | | | _ | + | [ | ] | \ | ~ | // TODO: Fix this row when &mkp is committed +// | GUI | | SPC | | ENT | | ALT | + bindings = < + &kp ESC &kp BANG &kp ATSN &kp HASH &kp CURU &kp PRCT &kp CRRT &kp AMPS &kp KMLT &kp LPRN &kp RPRN &kp BKSP + &kp LCTL &trans &trans &trans &trans &trans &kp MINUS &kp EQL &kp LBKT &kp RBKT &kp PIPE &kp GRAV + &kp LSFT &trans &trans &trans &trans &trans &trans &trans &trans &trans &kp BSLH &kp TILD + &kp LGUI &trans &kp SPC &kp RET &trans &kp RALT + >; + }; + }; }; + diff --git a/app/boards/shields/corne/corne_left.conf b/app/boards/shields/corne/corne_left.conf index e51dee4..1e028a7 100644 --- a/app/boards/shields/corne/corne_left.conf +++ b/app/boards/shields/corne/corne_left.conf @@ -1,2 +1,2 @@ CONFIG_ZMK_SPLIT=y -CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
\ No newline at end of file +CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y diff --git a/app/boards/shields/corne/corne_left.overlay b/app/boards/shields/corne/corne_left.overlay index 399bddd..f12c417 100644 --- a/app/boards/shields/corne/corne_left.overlay +++ b/app/boards/shields/corne/corne_left.overlay @@ -16,3 +16,7 @@ , <&pro_micro_d 14 GPIO_ACTIVE_HIGH> ; }; + +&bt_unpair_combo { + key-positions = <0 38>; +}; diff --git a/app/boards/shields/corne/corne_right.conf b/app/boards/shields/corne/corne_right.conf index a835adc..990cf7c 100644 --- a/app/boards/shields/corne/corne_right.conf +++ b/app/boards/shields/corne/corne_right.conf @@ -1,2 +1,2 @@ CONFIG_ZMK_SPLIT=y -CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y
\ No newline at end of file +CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y diff --git a/app/boards/shields/corne/corne_right.overlay b/app/boards/shields/corne/corne_right.overlay index 652d5ed..9d97d85 100644 --- a/app/boards/shields/corne/corne_right.overlay +++ b/app/boards/shields/corne/corne_right.overlay @@ -21,3 +21,6 @@ ; }; +&bt_unpair_combo { + key-positions = <11 39>; +}; diff --git a/app/boards/shields/kyria/boards/nrfmicro_11.overlay b/app/boards/shields/kyria/boards/nrfmicro_11.overlay new file mode 100644 index 0000000..d7f724f --- /dev/null +++ b/app/boards/shields/kyria/boards/nrfmicro_11.overlay @@ -0,0 +1,29 @@ +&spi1 { + compatible = "nordic,nrf-spi"; + status = "okay"; + mosi-pin = <6>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <12>; // 0.12 is not broken out on the nRFMicro + miso-pin = <22>; // 0.22 is not broken out on the nRFMicro + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "WS2812"; + + /* SPI */ + reg = <0>; /* ignored, but necessary for SPI bindings */ + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <10>; /* arbitrary; change at will */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; + +/ { + chosen { + zmk,underglow = &led_strip; + }; +}; + diff --git a/app/boards/shields/kyria/boards/nrfmicro_11_flipped.overlay b/app/boards/shields/kyria/boards/nrfmicro_11_flipped.overlay new file mode 100644 index 0000000..c5f2a94 --- /dev/null +++ b/app/boards/shields/kyria/boards/nrfmicro_11_flipped.overlay @@ -0,0 +1,28 @@ +&spi1 { + compatible = "nordic,nrf-spi"; + status = "okay"; + mosi-pin = <6>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <12>; // 0.12 is not broken out on the nRFMicro + miso-pin = <22>; // 0.22 is not broken out on the nRFMicro + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "WS2812"; + + /* SPI */ + reg = <0>; /* ignored, but necessary for SPI bindings */ + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <10>; /* arbitrary; change at will */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; + +/ { + chosen { + zmk,underglow = &led_strip; + }; +}; diff --git a/app/boards/shields/kyria/boards/nrfmicro_13.overlay b/app/boards/shields/kyria/boards/nrfmicro_13.overlay new file mode 100644 index 0000000..c5f2a94 --- /dev/null +++ b/app/boards/shields/kyria/boards/nrfmicro_13.overlay @@ -0,0 +1,28 @@ +&spi1 { + compatible = "nordic,nrf-spi"; + status = "okay"; + mosi-pin = <6>; + // Unused pins, needed for SPI definition, but not used by the ws2812 driver itself. + sck-pin = <12>; // 0.12 is not broken out on the nRFMicro + miso-pin = <22>; // 0.22 is not broken out on the nRFMicro + + led_strip: ws2812@0 { + compatible = "worldsemi,ws2812-spi"; + label = "WS2812"; + + /* SPI */ + reg = <0>; /* ignored, but necessary for SPI bindings */ + spi-max-frequency = <4000000>; + + /* WS2812 */ + chain-length = <10>; /* arbitrary; change at will */ + spi-one-frame = <0x70>; + spi-zero-frame = <0x40>; + }; +}; + +/ { + chosen { + zmk,underglow = &led_strip; + }; +}; diff --git a/app/boards/shields/kyria/kyria.conf b/app/boards/shields/kyria/kyria.conf index fa98d1c..7a0b5b6 100644 --- a/app/boards/shields/kyria/kyria.conf +++ b/app/boards/shields/kyria/kyria.conf @@ -5,5 +5,6 @@ # Uncomment the following line to enable the Kyria OLED Display # CONFIG_ZMK_DISPLAY=y -# Uncomment the following line to enable RGB underglow +# Uncomment the following lines to enable RGB underglow # CONFIG_ZMK_RGB_UNDERGLOW=y +# CONFIG_WS2812_STRIP=y diff --git a/app/boards/shields/kyria/kyria.dtsi b/app/boards/shields/kyria/kyria.dtsi index bbead84..a13f7f0 100644 --- a/app/boards/shields/kyria/kyria.dtsi +++ b/app/boards/shields/kyria/kyria.dtsi @@ -81,6 +81,10 @@ RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,7) RC(2,8) RC(2,9) sensors = <&left_encoder &right_encoder>; }; + bt_unpair_combo: bt_unpair_combo { + compatible = "zmk,bt-unpair-combo"; + }; + // TODO: RGB node(s) }; diff --git a/app/boards/shields/kyria/kyria_left.overlay b/app/boards/shields/kyria/kyria_left.overlay index c8b5be2..441c1a6 100644 --- a/app/boards/shields/kyria/kyria_left.overlay +++ b/app/boards/shields/kyria/kyria_left.overlay @@ -22,3 +22,7 @@ &left_encoder { status = "okay"; }; + +&bt_unpair_combo { + key-positions = <0 44>; +};
\ No newline at end of file diff --git a/app/boards/shields/kyria/kyria_right.conf b/app/boards/shields/kyria/kyria_right.conf index a835adc..990cf7c 100644 --- a/app/boards/shields/kyria/kyria_right.conf +++ b/app/boards/shields/kyria/kyria_right.conf @@ -1,2 +1,2 @@ CONFIG_ZMK_SPLIT=y -CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y
\ No newline at end of file +CONFIG_ZMK_SPLIT_BLE_ROLE_PERIPHERAL=y diff --git a/app/boards/shields/kyria/kyria_right.overlay b/app/boards/shields/kyria/kyria_right.overlay index 8163c95..8ee0fcb 100644 --- a/app/boards/shields/kyria/kyria_right.overlay +++ b/app/boards/shields/kyria/kyria_right.overlay @@ -27,3 +27,7 @@ &right_encoder { status = "okay"; }; + +&bt_unpair_combo { + key-positions = <11 45>; +};
\ No newline at end of file diff --git a/app/boards/shields/lily58/lily58.dtsi b/app/boards/shields/lily58/lily58.dtsi index 8655d8c..24f6805 100644 --- a/app/boards/shields/lily58/lily58.dtsi +++ b/app/boards/shields/lily58/lily58.dtsi @@ -44,12 +44,16 @@ RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(4,5) RC(4,6) RC(3,6) RC(3,7) ; }; + + bt_unpair_combo: bt_unpair_combo { + compatible = "zmk,bt-unpair-combo"; + }; }; &pro_micro_i2c { status = "okay"; - ssd1306@3c { + oled: ssd1306@3c { compatible = "solomon,ssd1306fb"; reg = <0x3c>; label = "DISPLAY"; diff --git a/app/boards/shields/lily58/lily58_left.conf b/app/boards/shields/lily58/lily58_left.conf index e51dee4..1e028a7 100644 --- a/app/boards/shields/lily58/lily58_left.conf +++ b/app/boards/shields/lily58/lily58_left.conf @@ -1,2 +1,2 @@ CONFIG_ZMK_SPLIT=y -CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
\ No newline at end of file +CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y diff --git a/app/boards/shields/lily58/lily58_left.overlay b/app/boards/shields/lily58/lily58_left.overlay index c8e2213..c6f630f 100644 --- a/app/boards/shields/lily58/lily58_left.overlay +++ b/app/boards/shields/lily58/lily58_left.overlay @@ -17,3 +17,6 @@ ; }; +&bt_unpair_combo { + key-positions = <0 42>; +}; diff --git a/app/boards/shields/lily58/lily58_right.overlay b/app/boards/shields/lily58/lily58_right.overlay index 748be14..84f0b06 100644 --- a/app/boards/shields/lily58/lily58_right.overlay +++ b/app/boards/shields/lily58/lily58_right.overlay @@ -21,3 +21,6 @@ ; }; +&bt_unpair_combo { + key-positions = <11 43>; +}; |