#define _PAGE_ Disassembling the Archos
#include "head.t"

<p>There are several ways to disassemble the Archos Jukeboxes.
Here is an approach where you don't need to bend any metal parts.


<p><img src="b10.jpg">
<br>
First, remove the battery covers and unscrew all 8 visible screws: 2 torx screws on the left and right sides, and 2 small philips head screws on the top and bottom. Then you simply lift off the plastic top cover.
<hr>

<p><img src="b5.jpg"> <img src="b6.jpg">
<br>
Use your thumb nails to compress the thin edge of the rubber while gently pulling the metal plate over it.
<hr>

<p><img src="b7.jpg"> <img src="b8.jpg">
<br>
Do the same on the side.
<hr>

<p><img src="b9.jpg"> <img src="b11.jpg">
<br>
You have now freed one end of the Archos.
Now lift the blue rubber bumbers up from the circuit board on the other end, and simply slide the Archos out of its' back plate.

<p><i>Björn</i>

#include "foot.t"