/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Linus Nielsen Feltzing * * iPod driver based on code from the ipodlinux project - http://ipodlinux.org * Adapted for Rockbox in January 2006 * Original file: podzilla/usb.c * Copyright (C) 2005 Adam Johnston * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #include "kernel.h" #include "thread.h" #include "system.h" #include "debug.h" #include "ata.h" #include "fat.h" #include "disk.h" #include "panic.h" #include "lcd.h" #include "adc.h" #include "usb.h" #include "button.h" #include "sprintf.h" #include "string.h" #include "hwcompat.h" #ifdef HAVE_MMC #include "ata_mmc.h" #endif extern void dbg_ports(void); /* NASTY! defined in apps/ */ #ifdef HAVE_LCD_BITMAP bool do_screendump_instead_of_usb = false; void screen_dump(void); /* Nasty again. Defined in apps/ too */ #endif #define USB_REALLY_BRAVE #if !defined(SIMULATOR) && !defined(USB_NONE) /* Messages from usb_tick and thread states */ #define USB_INSERTED 1 #define USB_EXTRACTED 2 #ifdef HAVE_MMC #define USB_REENABLE 3 #endif #ifdef HAVE_USB_POWER #define USB_POWERED 4 #if CONFIG_KEYPAD == RECORDER_PAD #define USBPOWER_BUTTON BUTTON_F1 #define USBPOWER_BTN_IGNORE BUTTON_ON #elif CONFIG_KEYPAD == ONDIO_PAD #define USBPOWER_BUTTON BUTTON_MENU #define USBPOWER_BTN_IGNORE BUTTON_OFF #elif (CONFIG_KEYPAD == IPOD_4G_PAD) #define USBPOWER_BUTTON BUTTON_MENU #define USBPOWER_BTN_IGNORE BUTTON_PLAY #elif CONFIG_KEYPAD == IRIVER_H300_PAD #define USBPOWER_BUTTON BUTTON_REC #define USBPOWER_BTN_IGNORE BUTTON_ON #endif #endif /* HAVE_USB_POWER */ /* The ADC tick reads one channel per tick, and we want to check 3 successive readings on the USB voltage channel. This doesn't apply to the Player, but debouncing the USB detection port won't hurt us either. */ #define NUM_POLL_READINGS (NUM_ADC_CHANNELS * 3) static int countdown; static int usb_state; #ifdef HAVE_MMC static int usb_mmc_countdown = 0; #endif /* FIXME: The extra 0x800 is consumed by fat_mount() when the fsinfo needs updating */ #ifndef BOOTLOADER static long usb_stack[(DEFAULT_STACK_SIZE + 0x800)/sizeof(long)]; static const char usb_thread_name[] = "usb"; #endif static struct event_queue usb_queue; static bool last_usb_status; static bool usb_monitor_enabled; void usb_enable(bool on) { #ifdef USB_ENABLE_ONDIOSTYLE PACR2 &= ~0x04C0; /* use PA3, PA5 as GPIO */ if(on) { #ifdef HAVE_MMC mmc_enable_int_flash_clock(!mmc_detect()); #endif if (!(read_hw_mask() & MMC_CLOCK_POLARITY)) and_b(~0x20, &PBDRH); /* old circuit needs SCK1 = low while on USB */ or_b(0x20, &PADRL); /* enable USB */ and_b(~0x08, &PADRL); /* assert card detect */ } else { if (!(read_hw_mask() & MMC_CLOCK_POLARITY)) or_b(0x20, &PBDRH); /* reset SCK1 = high for old circuit */ and_b(~0x20, &PADRL); /* disable USB */ or_b(0x08, &PADRL); /* deassert card detect */ } or_b(0x28, &PAIORL); /* output for USB enable and card detect */ #elif defined(USB_GMINISTYLE) { int smsc_ver = smsc_version(); if (on) { if (smsc_ver < 4) { P6 &= ~0x04; P10 &= ~0x20; smsc_delay(); P6 |= 0x08; P10 |= 0x20; smsc_delay(); } P6 |= 0x10; } else { P6 &= ~0x10; if (smsc_ver < 4) { P6 &= ~0x04; P10 &= ~0x20; } } } #elif defined(USB_IRIVERSTYLE) if(on) { /* Power on the Cypress chip */ #ifdef IRIVER_H100_SERIES or_l(0x01000040, &GPIO_OUT); #else and_l(~0x00000008,&GPIO1_OUT); #endif sleep(2); } else { /* Power off the Cypress chip */ #ifdef IRIVER_H100_SERIES and_l(~0x01000040, &GPIO_OUT); #else or_l(0x00000008,&GPIO1_OUT); #endif } #elif defined(USB_IPODSTYLE) /* For the ipod, we can only do one thing with USB mode - reboot into Apple's flash-based disk-mode. This does not return. */ if (on) { /* The following code is copied from ipodlinux */ #if defined(APPLE_IPODCOLOR) || defined(APPLE_IPOD3G) || \ defined(APPLE_IPOD4G) || defined(APPLE_IPODMINI) unsigned char* storage_ptr = (unsigned char *)0x40017F00; #elif defined(APPLE_IPODNANO) || defined(APPLE_IPODVIDEO) unsigned char* storage_ptr = (unsigned char *)0x4001FF00; #endif memcpy(storage_ptr, "diskmode\0\0hotstuff\0\0\1", 21); DEV_RS |= 4; /* Reboot */ } #elif defined(USB_ISP1582) /* TODO: Implement USB_ISP1582 */ (void) on; #elif defined(USB_X5STYLE) /* TODO X5 */ #else #ifdef HAVE_LCD_BITMAP if(read_hw_mask() & USB_ACTIVE_HIGH) on = !on; #endif if(on) { and_b(~0x04, &PADRH); /* enable USB */ } else { or_b(0x04, &PADRH); } or_b(0x04, &PAIORH); #endif } #ifndef BOOTLOADER static void usb_slave_mode(bool on) { int rc; if(on) { DEBUGF("Entering USB slave mode\n"); ata_soft_reset(); ata_init(); ata_enable(false); usb_enable(true); } else { DEBUGF("Leaving USB slave mode\n"); /* Let the ISDx00 settle */ sleep(HZ*1); usb_enable(false); rc = ata_init(); if(rc) { /* fixme: can we remove this? (already such in main.c) */ char str[32]; lcd_clear_display(); snprintf(str, 31, "ATA error: %d", rc); lcd_puts(0, 0, str); lcd_puts(0, 1, "Press ON to debug"); lcd_update(); while(!(button_get(true) & BUTTON_REL)) {}; dbg_ports(); panicf("ata: %d",rc); } rc = disk_mount_all(); if (rc <= 0) /* no partition */ panicf("mount: %d",rc); } } static void usb_thread(void) { int num_acks_to_expect = -1; bool waiting_for_ack; struct event ev; waiting_for_ack = false; while(1) { queue_wait(&usb_queue, &ev); switch(ev.id) { case USB_INSERTED: #ifdef HAVE_LCD_BITMAP if(do_screendump_instead_of_usb) { screen_dump(); } else #endif #ifdef HAVE_USB_POWER if((button_status() & ~USBPOWER_BTN_IGNORE) == USBPOWER_BUTTON) { usb_state = USB_POWERED; } else #endif { /* Tell all threads that they have to back off the ATA. We subtract one for our own thread. */ num_acks_to_expect = queue_broadcast(SYS_USB_CONNECTED, NULL) - 1; waiting_for_ack = true; DEBUGF("USB inserted. Waiting for ack from %d threads...\n", num_acks_to_expect); } break; case SYS_USB_CONNECTED_ACK: if(waiting_for_ack) { num_acks_to_expect--; if(num_acks_to_expect == 0) { DEBUGF("All threads have acknowledged the connect.\n"); #ifdef USB_REALLY_BRAVE usb_slave_mode(true); usb_state = USB_INSERTED; cpu_idle_mode(true); #else system_reboot(); #endif } else { DEBUGF("usb: got ack, %d to go...\n", num_acks_to_expect); } } break; case USB_EXTRACTED: #ifdef HAVE_LCD_BITMAP if(do_screendump_instead_of_usb) break; #endif #ifdef HAVE_USB_POWER if(usb_state == USB_POWERED) { usb_state = USB_EXTRACTED; break; } #endif if(usb_state == USB_INSERTED) { /* Only disable the USB mode if we really have enabled it some threads might not have acknowledged the insertion */ usb_slave_mode(false); cpu_idle_mode(false); } usb_state = USB_EXTRACTED; /* Tell all threads that we are back in business */ num_acks_to_expect = queue_broadcast(SYS_USB_DISCONNECTED, NULL) - 1; waiting_for_ack = true; DEBUGF("USB extracted. Waiting for ack from %d threads...\n", num_acks_to_expect); #ifdef HAVE_LCD_CHARCELLS lcd_icon(ICON_USB, false); #endif break; case SYS_USB_DISCONNECTED_ACK: if(waiting_for_ack) { num_acks_to_expect--; if(num_acks_to_expect == 0) { DEBUGF("All threads have acknowledged. " "We're in business.\n"); } else { DEBUGF("usb: got ack, %d to go...\n", num_acks_to_expect); } } break; #ifdef HAVE_MMC case SYS_MMC_INSERTED: case SYS_MMC_EXTRACTED: if(usb_state == USB_INSERTED) { usb_enable(false); usb_mmc_countdown = HZ/2; /* re-enable after 0.5 sec */ } break; case USB_REENABLE: if(usb_state == USB_INSERTED) usb_enable(true); /* reenable only if still inserted */ break; #endif } } } #endif bool usb_detect(void) { bool current_status; #ifdef USB_RECORDERSTYLE current_status = (adc_read(ADC_USB_POWER) > 500)?true:false; #endif #ifdef USB_FMRECORDERSTYLE current_status = (adc_read(ADC_USB_POWER) <= 512)?true:false; #endif #ifdef USB_PLAYERSTYLE current_status = (PADR & 0x8000)?false:true; #endif #ifdef USB_IRIVERSTYLE current_status = (GPIO1_READ & 0x80)?true:false; #endif #ifdef USB_GMINISTYLE current_status = (P5 & 0x10)?true:false; #endif #ifdef USB_IPODSTYLE /* The following check is in the ipodlinux source, with the comment "USB2D_IDENT is bad" if USB2D_IDENT != 0x22FA05 */ if (USB2D_IDENT != 0x22FA05) { return false; } #ifdef APPLE_IPODVIDEO current_status = (GPIOB_INPUT_VAL & 0x01)?false:true; #else current_status = (USB_STATUS & 0x800)?true:false; #endif #endif #ifdef USB_ISP1582 /* TODO: Implement USB_ISP1582 */ current_status = false; #endif return current_status; } #ifndef BOOTLOADER static void usb_tick(void) { bool current_status; #ifdef USB_GMINISTYLE /* Keep usb chip in usb state (?) */ if (P5 & 0x10) { if ((P10 & 0x20) == 0 || (P6 & 0x08) == 0) { if (smsc_version() < 4) { P6 |= 0x08; P10 |= 0x20; } } } #endif if(usb_monitor_enabled) { current_status = usb_detect(); /* Only report when the status has changed */ if(current_status != last_usb_status) { last_usb_status = current_status; countdown = NUM_POLL_READINGS; } else { /* Count down until it gets negative */ if(countdown >= 0) countdown--; /* Report to the thread if we have had 3 identical status readings in a row */ if(countdown == 0) { if(current_status) queue_post(&usb_queue, USB_INSERTED, NULL); else queue_post(&usb_queue, USB_EXTRACTED, NULL); } } } #ifdef HAVE_MMC if(usb_mmc_countdown > 0) { usb_mmc_countdown--; if (usb_mmc_countdown == 0) queue_post(&usb_queue, USB_REENABLE, NULL); } #endif } #endif void usb_acknowledge(long id) { queue_post(&usb_queue, id, NULL); } void usb_init(void) { usb_state = USB_EXTRACTED; usb_monitor_enabled = false; countdown = -1; #ifdef USB_IRIVERSTYLE or_l(0x00000080, &GPIO1_FUNCTION); /* GPIO39 is the USB detect input */ #ifdef IRIVER_H300_SERIES /* ISD300 3.3V ON */ or_l(8,&GPIO1_FUNCTION); or_l(8,&GPIO1_OUT); or_l(8,&GPIO1_ENABLE); /* Tristate the SCK/SDA to the ISD300 config EEPROM */ and_l(~0x03000000, &GPIO_ENABLE); or_l(0x03000000, &GPIO_FUNCTION); #else and_l(~0x01000040, &GPIO_OUT); /* GPIO24 is the Cypress chip power */ or_l(0x01000040, &GPIO_ENABLE); or_l(0x01000040, &GPIO_FUNCTION); #endif #elif defined(USB_IPODSTYLE) int r0; outl(inl(0x70000084) | 0x200, 0x70000084); outl(inl(0x7000002C) | 0x3000000, 0x7000002C); outl(inl(0x6000600C) | 0x400000, 0x6000600C); outl(inl(0x60006004) | 0x400000, 0x60006004); /* reset usb start */ outl(inl(0x60006004) & ~0x400000, 0x60006004); /* reset usb end */ outl(inl(0x70000020) | 0x80000000, 0x70000020); while ((inl(0x70000028) & 0x80) == 0); outl(inl(0xc5000184) | 0x100, 0xc5000184); while ((inl(0xc5000184) & 0x100) != 0); outl(inl(0xc50001A4) | 0x5F000000, 0xc50001A4); if ((inl(0xc50001A4) & 0x100) == 0) { outl(inl(0xc50001A8) & ~0x3, 0xc50001A8); outl(inl(0xc50001A8) | 0x2, 0xc50001A8); outl(inl(0x70000028) | 0x4000, 0x70000028); outl(inl(0x70000028) | 0x2, 0x70000028); } else { outl(inl(0xc50001A8) | 0x3, 0xc50001A8); outl(inl(0x70000028) &~0x4000, 0x70000028); outl(inl(0x70000028) | 0x2, 0x70000028); } outl(inl(0xc5000140) | 0x2, 0xc5000140); while((inl(0xc5000140) & 0x2) != 0); r0 = inl(0xc5000184); /* Note from IPL source (referring to next 5 lines of code: THIS NEEDS TO BE CHANGED ONCE THERE IS KERNEL USB */ outl(inl(0x70000020) | 0x80000000, 0x70000020); outl(inl(0x6000600C) | 0x400000, 0x6000600C); while ((inl(0x70000028) & 0x80) == 0); outl(inl(0x70000028) | 0x2, 0x70000028); udelay(0x186A0); #endif usb_enable(false); /* We assume that the USB cable is extracted */ last_usb_status = false; #ifndef BOOTLOADER queue_init(&usb_queue); create_thread(usb_thread, usb_stack, sizeof(usb_stack), usb_thread_name); tick_add_task(usb_tick); #endif } void usb_wait_for_disconnect(struct event_queue *q) { struct event ev; /* Don't return until we get SYS_USB_DISCONNECTED */ while(1) { queue_wait(q, &ev); if(ev.id == SYS_USB_DISCONNECTED) { usb_acknowledge(SYS_USB_DISCONNECTED_ACK); return; } } } int usb_wait_for_disconnect_w_tmo(struct event_queue *q, int ticks) { struct event ev; /* Don't return until we get SYS_USB_DISCONNECTED or SYS_TIMEOUT */ while(1) { queue_wait_w_tmo(q, &ev, ticks); switch(ev.id) { case SYS_USB_DISCONNECTED: usb_acknowledge(SYS_USB_DISCONNECTED_ACK); return 0; break; case SYS_TIMEOUT: return 1; break; } } } void usb_start_monitoring(void) { usb_monitor_enabled = true; } bool usb_inserted(void) { #ifdef HAVE_USB_POWER return usb_state == USB_INSERTED || usb_state == USB_POWERED; #else return usb_state == USB_INSERTED; #endif } #ifdef HAVE_USB_POWER bool usb_powered(void) { return usb_state == USB_POWERED; } #endif #else #ifdef USB_NONE bool usb_inserted(void) { return false; } #endif /* Dummy simulator functions */ void usb_acknowledge(long id) { id = id; } void usb_init(void) { } void usb_start_monitoring(void) { } bool usb_detect(void) { return false; } void usb_wait_for_disconnect(struct event_queue *q) { (void)q; } #endif /* USB_NONE or SIMULATOR */