/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by Michael Sevakis * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include "system.h" #include "kernel.h" #include "logf.h" #include "audio.h" #include "sound.h" #if defined(HAVE_SPDIF_REC) || defined(HAVE_SPDIF_OUT) #include "spdif.h" #endif /* peaks */ static unsigned long *rec_peak_addr; enum { PLAY_PEAK_LEFT = 0, PLAY_PEAK_RIGHT, REC_PEAK_LEFT, REC_PEAK_RIGHT }; static int peaks[4]; /* p-l, p-r, r-l, r-r */ #define IIS_PLAY_DEFPARM ( (freq_ent[FPARM_CLOCKSEL] << 12) | \ (IIS_PLAY & (7 << 8)) | \ (4 << 2) ) /* 64 bit clocks / word clock */ #define IIS_FIFO_RESET (1 << 11) #define PDIR2_FIFO_RESET (1 << 9) #if defined(IAUDIO_X5) || defined(IAUDIO_M5) #define SET_IIS_PLAY(x) IIS1CONFIG = (x) #define IIS_PLAY IIS1CONFIG #else #define SET_IIS_PLAY(x) IIS2CONFIG = (x) #define IIS_PLAY IIS2CONFIG #endif static bool is_playback_monitoring(void) { return (IIS_PLAY & (7 << 8)) == (3 << 8); } static void iis_play_reset_if_playback(bool if_playback) { bool is_playback = is_playback_monitoring(); if (is_playback != if_playback) return; or_l(IIS_FIFO_RESET, &IIS_PLAY); } #define PLLCR_SET_AUDIO_BITS_DEFPARM \ ((freq_ent[FPARM_CLSEL] << 28) | (1 << 22)) /** Sample rates **/ #define FPARM_CLOCKSEL 0 #define FPARM_CLSEL 1 #define FPARM_FSEL 2 #if CONFIG_CPU == MCF5249 && defined(HAVE_UDA1380) static const unsigned char pcm_freq_parms[HW_NUM_FREQ][3] = { [HW_FREQ_88] = { 0x0c, 0x01, 0x03 }, [HW_FREQ_44] = { 0x06, 0x01, 0x02 }, [HW_FREQ_22] = { 0x04, 0x02, 0x01 }, [HW_FREQ_11] = { 0x02, 0x02, 0x00 }, }; #endif #if CONFIG_CPU == MCF5250 && defined(HAVE_TLV320) static const unsigned char pcm_freq_parms[HW_NUM_FREQ][3] = { [HW_FREQ_88] = { 0x0c, 0x01, 0x02 }, [HW_FREQ_44] = { 0x06, 0x01, 0x01 }, [HW_FREQ_22] = { 0x04, 0x01, 0x00 }, [HW_FREQ_11] = { 0x02, 0x02, 0x00 }, }; #endif static int pcm_freq = HW_SAMPR_DEFAULT; /* 44.1 is default */ static const unsigned char *freq_ent = pcm_freq_parms[HW_FREQ_DEFAULT]; /* set frequency used by the audio hardware */ void pcm_set_frequency(unsigned int frequency) { int index; switch(frequency) { case SAMPR_11: index = HW_FREQ_11; break; case SAMPR_22: index = HW_FREQ_22; break; default: case SAMPR_44: index = HW_FREQ_44; break; case SAMPR_88: index = HW_FREQ_88; break; } /* remember table entry and rate */ freq_ent = pcm_freq_parms[index]; pcm_freq = hw_freq_sampr[index]; } /* pcm_set_frequency */ /* apply audio settings */ bool _pcm_apply_settings(bool clear_reset) { static int last_pcm_freq = 0; bool did_reset = false; unsigned long iis_play_defparm = IIS_PLAY_DEFPARM; if (pcm_freq != last_pcm_freq) { last_pcm_freq = pcm_freq; /* Reprogramming bits 15-12 requires FIFO to be in a reset condition - Users Manual 17-8, Note 11 */ or_l(IIS_FIFO_RESET, &IIS_PLAY); /* Important for TLV320 - this must happen in the correct order or starting recording will sound absolutely awful once in awhile - audiohw_set_frequency then coldfire_set_pllcr_audio_bits */ SET_IIS_PLAY(iis_play_defparm | IIS_FIFO_RESET); audiohw_set_frequency(freq_ent[FPARM_FSEL]); coldfire_set_pllcr_audio_bits(PLLCR_SET_AUDIO_BITS_DEFPARM); did_reset = true; } /* If a reset was done because of a sample rate change, IIS_PLAY will have been set already, so only needs to be set again if the reset flag must be cleared. If the frequency didn't change, it was never altered and the reset flag can just be removed or no action taken. */ if (clear_reset) SET_IIS_PLAY(iis_play_defparm & ~IIS_FIFO_RESET); #if 0 logf("IISPLAY: %08X", IIS_PLAY); #endif return did_reset; } /* _pcm_apply_settings */ /* This clears the reset bit to enable monitoring immediately if monitoring recording sources or always if playback is in progress - we might be switching samplerates on the fly */ void pcm_apply_settings(void) { int level = set_irq_level(DMA_IRQ_LEVEL); bool pbm = is_playback_monitoring(); bool kick = (DCR0 & DMA_EEXT) != 0 && pbm; /* Clear reset if not playback monitoring or peripheral request is active and playback monitoring */ if (_pcm_apply_settings(!pbm || kick) && kick) PDOR3 = 0; /* Kick FIFO out of reset by writing to it */ set_irq_level(level); } /* pcm_apply_settings */ /** DMA **/ /**************************************************************************** ** Playback DMA transfer **/ /* Set up the DMA transfer that kicks in when the audio FIFO gets empty */ void pcm_play_dma_start(const void *addr, size_t size) { int level; logf("pcm_play_dma_start"); addr = (void *)((unsigned long)addr & ~3); /* Align data */ size &= ~3; /* Size must be multiple of 4 */ /* If a tranfer is going, prevent an interrupt while setting up a new one */ level = set_irq_level(DMA_IRQ_LEVEL); pcm_playing = true; /* Set up DMA transfer */ SAR0 = (unsigned long)addr; /* Source address */ DAR0 = (unsigned long)&PDOR3; /* Destination address */ BCR0 = (unsigned long)size; /* Bytes to transfer */ /* Enable the FIFO and force one write to it */ _pcm_apply_settings(is_playback_monitoring()); DCR0 = DMA_INT | DMA_EEXT | DMA_CS | DMA_AA | DMA_SINC | DMA_SSIZE(DMA_SIZE_LINE) | DMA_START; set_irq_level(level); } /* pcm_play_dma_start */ /* Stops the DMA transfer and interrupt */ static void pcm_play_dma_stop_irq(void) { pcm_playing = false; if (!audio_status()) pcm_paused = false; DSR0 = 1; DCR0 = 0; /* Place TX FIFO in reset condition if playback monitoring is on. Recording monitoring something else should not be stopped. */ iis_play_reset_if_playback(true); } /* pcm_play_dma_stop_irq */ void pcm_play_dma_stop(void) { int level = set_irq_level(DMA_IRQ_LEVEL); logf("pcm_play_dma_stop"); pcm_play_dma_stop_irq(); set_irq_level(level); } /* pcm_play_dma_stop */ void pcm_init(void) { logf("pcm_init"); pcm_playing = false; pcm_paused = false; pcm_callback_for_more = NULL; AUDIOGLOB = (1 << 8) /* IIS1 fifo auto sync */ | (1 << 7) /* PDIR2 fifo auto sync */ #ifdef HAVE_SPDIF_OUT | (1 << 10) /* EBU TX auto sync */ #endif ; DIVR0 = 54; /* DMA0 is mapped into vector 54 in system.c */ and_l(0xffffff00, &DMAROUTE); or_l(DMA0_REQ_AUDIO_1, &DMAROUTE); DMACONFIG = 1; /* DMA0Req = PDOR3, DMA1Req = PDIR2 */ /* Call pcm_play_dma_stop to initialize everything. */ pcm_play_dma_stop(); /* Call pcm_close_recording to put in closed state */ pcm_close_recording(); /* Setup Coldfire I2S before initializing hardware or changing other settings. */ or_l(IIS_FIFO_RESET, &IIS_PLAY); SET_IIS_PLAY(IIS_PLAY_DEFPARM | IIS_FIFO_RESET); pcm_set_frequency(HW_FREQ_DEFAULT); audio_set_output_source(AUDIO_SRC_PLAYBACK); /* Initialize default register values. */ audiohw_init(); audio_input_mux(AUDIO_SRC_PLAYBACK, SRCF_PLAYBACK); audiohw_set_frequency(freq_ent[FPARM_FSEL]); coldfire_set_pllcr_audio_bits(PLLCR_SET_AUDIO_BITS_DEFPARM); #if defined(HAVE_SPDIF_REC) || defined(HAVE_SPDIF_OUT) spdif_init(); #endif /* Enable interrupt at level 6, priority 0 */ ICR6 = (6 << 2); and_l(~(1 << 14), &IMR); /* bit 14 is DMA0 */ } /* pcm_init */ void pcm_postinit(void) { audiohw_postinit(); } size_t pcm_get_bytes_waiting(void) { return BCR0 & 0xffffff; } /* pcm_get_bytes_waiting */ /* DMA0 Interrupt is called when the DMA has finished transfering a chunk from the caller's buffer */ void DMA0(void) __attribute__ ((interrupt_handler, section(".icode"))); void DMA0(void) { int res = DSR0; DSR0 = 1; /* Clear interrupt */ and_l(~DMA_EEXT, &DCR0); /* Disable peripheral request */ /* Stop on error */ if ((res & 0x70) == 0) { pcm_more_callback_type get_more = pcm_callback_for_more; unsigned char *next_start; size_t next_size = 0; if (get_more) get_more(&next_start, &next_size); if (next_size > 0) { SAR0 = (unsigned long)next_start; /* Source address */ BCR0 = next_size; /* Bytes to transfer */ or_l(DMA_EEXT, &DCR0); /* Enable peripheral request */ return; } else { /* Finished playing */ #if 0 /* int. logfs can trash the display */ logf("DMA0 No Data:0x%04x", res); #endif } } else { logf("DMA0 err: %02x", res); #if 0 logf(" SAR0: %08x", SAR0); logf(" DAR0: %08x", DAR0); logf(" BCR0: %08x", BCR0); logf(" DCR0: %08x", DCR0); #endif } pcm_play_dma_stop_irq(); } /* DMA0 */ /**************************************************************************** ** Recording DMA transfer **/ void pcm_rec_dma_start(void *addr, size_t size) { int level; logf("pcm_rec_dma_start"); addr = (void *)((unsigned long)addr & ~3); /* Align data */ size &= ~3; /* Size must be multiple of 4 */ /* No DMA1 interrupts while setting up a new transfer */ level = set_irq_level(DMA_IRQ_LEVEL); pcm_recording = true; and_l(~PDIR2_FIFO_RESET, &DATAINCONTROL); /* Clear TX FIFO reset bit if the source is not set to monitor playback otherwise maintain independence between playback and recording. */ _pcm_apply_settings(!is_playback_monitoring()); /* Start the DMA transfer.. */ #ifdef HAVE_SPDIF_REC /* clear: ebu1cnew, valnogood, symbolerr, parityerr */ INTERRUPTCLEAR = (1 << 25) | (1 << 24) | (1 << 23) | (1 << 22); #endif SAR1 = (unsigned long)&PDIR2; /* Source address */ rec_peak_addr = (unsigned long *)addr; /* Start peaking at dest */ DAR1 = (unsigned long)addr; /* Destination address */ BCR1 = (unsigned long)size; /* Bytes to transfer */ DCR1 = DMA_INT | DMA_EEXT | DMA_CS | DMA_AA | DMA_DINC | DMA_DSIZE(DMA_SIZE_LINE) /* | DMA_START */; set_irq_level(level); } /* pcm_dma_start */ static void pcm_rec_dma_stop_irq(void) { DSR1 = 1; /* Clear interrupt */ DCR1 = 0; pcm_recording = false; or_l(PDIR2_FIFO_RESET, &DATAINCONTROL); iis_play_reset_if_playback(false); } /* pcm_rec_dma_stop_irq */ void pcm_rec_dma_stop(void) { int level = set_irq_level(DMA_IRQ_LEVEL); logf("pcm_rec_dma_stop"); pcm_rec_dma_stop_irq(); set_irq_level(level); } /* pcm_rec_dma_stop */ void pcm_init_recording(void) { int level = set_irq_level(DMA_IRQ_LEVEL); logf("pcm_init_recording"); pcm_recording = false; pcm_callback_more_ready = NULL; DIVR1 = 55; /* DMA1 is mapped into vector 55 in system.c */ DMACONFIG = 1; /* DMA0Req = PDOR3, DMA1Req = PDIR2 */ and_l(0xffff00ff, &DMAROUTE); or_l(DMA1_REQ_AUDIO_2, &DMAROUTE); pcm_rec_dma_stop_irq(); ICR7 = (6 << 2) | (1 << 0); /* Enable interrupt at level 6, priority 1 */ and_l(~(1 << 15), &IMR); /* bit 15 is DMA1 */ set_irq_level(level); } /* pcm_init_recording */ void pcm_close_recording(void) { int level = set_irq_level(DMA_IRQ_LEVEL); logf("pcm_close_recording"); pcm_rec_dma_stop_irq(); and_l(0xffff00ff, &DMAROUTE); ICR7 = 0x00; /* Disable interrupt */ or_l((1 << 15), &IMR); /* bit 15 is DMA1 */ set_irq_level(level); } /* pcm_close_recording */ /* DMA1 Interrupt is called when the DMA has finished transfering a chunk into the caller's buffer */ void DMA1(void) __attribute__ ((interrupt_handler, section(".icode"))); void DMA1(void) { int res = DSR1; int status = 0; pcm_more_callback_type2 more_ready; DSR1 = 1; /* Clear interrupt */ and_l(~DMA_EEXT, &DCR1); /* Disable peripheral request */ if (res & 0x70) { status = DMA_REC_ERROR_DMA; logf("DMA1 err: %02x", res); #if 0 logf(" SAR1: %08x", SAR1); logf(" DAR1: %08x", DAR1); logf(" BCR1: %08x", BCR1); logf(" DCR1: %08x", DCR1); #endif } #ifdef HAVE_SPDIF_REC else if (DATAINCONTROL == 0xc038 && (INTERRUPTSTAT & ((1 << 24) | (1 << 23) | (1 << 22)))) { /* reason: valnogood, symbolerr, parityerr */ /* clear: ebu1cnew, valnogood, symbolerr, parityerr */ INTERRUPTCLEAR = (1 << 25) | (1 << 24) | (1 << 23) | (1 << 22); status = DMA_REC_ERROR_SPDIF; logf("spdif err"); } #endif more_ready = pcm_callback_more_ready; if (more_ready != NULL && more_ready(status) >= 0) return; #if 0 /* int. logfs can trash the display */ logf("DMA1 done:%04x %d", res, status); #endif /* Finished recording */ pcm_rec_dma_stop_irq(); } /* DMA1 */ /* Continue transferring data in - call from interrupt callback */ void pcm_record_more(void *start, size_t size) { rec_peak_addr = (unsigned long *)start; /* Start peaking at dest */ DAR1 = (unsigned long)start; /* Destination address */ BCR1 = (unsigned long)size; /* Bytes to transfer */ or_l(DMA_EEXT, &DCR1); /* Enable peripheral request */ } void pcm_mute(bool mute) { audiohw_mute(mute); if (mute) sleep(HZ/16); } /* pcm_mute */ void pcm_play_pause_pause(void) { /* Disable DMA peripheral request. */ int level = set_irq_level(DMA_IRQ_LEVEL); and_l(~DMA_EEXT, &DCR0); iis_play_reset_if_playback(true); set_irq_level(level); } /* pcm_play_pause_pause */ void pcm_play_pause_unpause(void) { int level = set_irq_level(DMA_IRQ_LEVEL); /* Enable the FIFO and force one write to it */ _pcm_apply_settings(is_playback_monitoring()); or_l(DMA_EEXT | DMA_START, &DCR0); set_irq_level(level); } /* pcm_play_pause_unpause */ /** * Do peak calculation using distance squared from axis and save a lot * of jumps and negation. Don't bother with the calculations of left or * right only as it's never really used and won't save much time. */ static void pcm_peak_peeker(unsigned long *addr, unsigned long *end, int peaks[2]) { long peak_l = 0, peak_r = 0; long peaksq_l = 0, peaksq_r = 0; do { long value = *addr; long ch, chsq; ch = value >> 16; chsq = ch*ch; if (chsq > peaksq_l) peak_l = ch, peaksq_l = chsq; ch = (short)value; chsq = ch*ch; if (chsq > peaksq_r) peak_r = ch, peaksq_r = chsq; addr += 4; } while (addr < end); peaks[0] = abs(peak_l); peaks[1] = abs(peak_r); } /* pcm_peak_peeker */ /** * Return playback peaks - Peaks ahead in the DMA buffer based upon the * calling period to attempt to compensate for * delay. */ void pcm_calculate_peaks(int *left, int *right) { static unsigned long last_peak_tick = 0; static unsigned long frame_period = 0; long samples, samp_frames; unsigned long *addr; /* Throttled peak ahead based on calling period */ unsigned long period = current_tick - last_peak_tick; /* Keep reasonable limits on period */ if (period < 1) period = 1; else if (period > HZ/5) period = HZ/5; frame_period = (3*frame_period + period) >> 2; last_peak_tick = current_tick; if (pcm_playing && !pcm_paused) { /* Snapshot as quickly as possible */ asm volatile ( "move.l %c[sar0], %[start] \n" "move.l %c[bcr0], %[count] \n" : [start]"=r"(addr), [count]"=r"(samples) : [sar0]"p"(&SAR0), [bcr0]"p"(&BCR0) ); samples &= 0xfffffc; samp_frames = frame_period*pcm_freq/(HZ/4); samples = MIN(samp_frames, samples) >> 2; if (samples > 0) { addr = (long *)((long)addr & ~3); pcm_peak_peeker(addr, addr + samples, &peaks[PLAY_PEAK_LEFT]); } } else { peaks[PLAY_PEAK_LEFT] = peaks[PLAY_PEAK_RIGHT] = 0; } if (left) *left = peaks[PLAY_PEAK_LEFT]; if (right) *right = peaks[PLAY_PEAK_RIGHT]; } /* pcm_calculate_peaks */ /** * Return recording peaks - From the end of the last peak up to * current write position. */ void pcm_calculate_rec_peaks(int *left, int *right) { if (pcm_recording) { unsigned long *addr, *end; /* Snapshot as quickly as possible */ asm volatile ( "move.l %c[start], %[addr] \n" "move.l %c[dar1], %[end] \n" "and.l %[mask], %[addr] \n" "and.l %[mask], %[end] \n" : [addr]"=r"(addr), [end]"=r"(end) : [start]"p"(&rec_peak_addr), [dar1]"p"(&DAR1), [mask]"r"(~3) ); if (addr < end) { pcm_peak_peeker(addr, end, &peaks[REC_PEAK_LEFT]); if (addr == rec_peak_addr) rec_peak_addr = end; } } else { peaks[REC_PEAK_LEFT] = peaks[REC_PEAK_RIGHT] = 0; } if (left) *left = peaks[REC_PEAK_LEFT]; if (right) *right = peaks[REC_PEAK_RIGHT]; } /* pcm_calculate_rec_peaks */