/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Heikki Hannikainen, Uwe Freese * Revisions copyright (C) 2005 by Gerald Van Baren * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "adc.h" #include "powermgmt.h" const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] = { 3540 }; const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] = { 3500 }; /* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */ const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] = { /* average measured values from X5 and M5L */ { 3500, 3650, 3720, 3740, 3760, 3790, 3840, 3900, 3950, 4040, 4120 } }; /* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */ const unsigned short percent_to_volt_charge[11] = { /* TODO: This is identical to the discharge curve. * Calibrate charging curve using a battery_bench log. */ 3500, 3650, 3720, 3740, 3760, 3790, 3840, 3900, 3950, 4040, 4120 }; #define BATTERY_SCALE_FACTOR 6000 /* full-scale ADC readout (2^10) in millivolt */ /* Returns battery voltage from ADC [millivolts] */ unsigned int battery_adc_voltage(void) { return (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) >> 10; }