/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Karl Kurbjun * * Some of this is based on the Cowon A2 Firmware release: * http://www.cowonglobal.com/download/gnu/cowon_pmp_a2_src_1.59_GPL.tar.gz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include #include "config.h" #include "cpu.h" #include "string.h" #include "kernel.h" #include "memory.h" #include "mmu-arm.h" #include "system-target.h" #include "lcd.h" #include "lcd-target.h" #include "dsp-target.h" #include "dsp/ipc.h" #if CONFIG_ORIENTATION == SCREEN_PORTRAIT #define LCD_USE_DMA #elif defined(LCD_STRIDEFORMAT) && LCD_STRIDEFORMAT == VERTICAL_STRIDE #define LCD_USE_DMA #endif /* Copies a rectangle from one framebuffer to another. Can be used in single transfer mode with width = num pixels, and height = 1 which allows a full-width rectangle to be copied more efficiently. */ extern void lcd_copy_buffer_rect(fb_data *dst, const fb_data *src, int width, int height); #if defined(HAVE_LCD_SLEEP) static bool lcd_on = true; #endif /* ** These are imported from lcd-16bit.c */ extern unsigned fg_pattern; extern unsigned bg_pattern; #if defined(HAVE_LCD_SLEEP) bool lcd_active(void) { return lcd_on; } #endif #if defined(HAVE_LCD_SLEEP) void lcd_sleep() { if (lcd_on) { lcd_on = false; memset16(FRAME, 0xFFFF, LCD_WIDTH*LCD_HEIGHT); sleep(HZ/5); /* Disabling these saves another ~15mA */ IO_OSD_OSDWINMD0 &= ~(0x01); IO_VID_ENC_VMOD &= ~(0x01); /* Disabling the LCD saves ~50mA */ IO_GIO_BITCLR2=1<<4; /* pin 36 */ } } void lcd_awake(void) { /* "enabled" implies "powered" */ if (!lcd_on) { lcd_on=true; IO_OSD_OSDWINMD0 |= 0x01; IO_VID_ENC_VMOD |= 0x01; sleep(2); IO_GIO_BITSET2 = 1<<4; lcd_update(); /* Wait long enough for a frame to be written */ sleep(HZ/10); send_event(LCD_EVENT_ACTIVATION, NULL); } } #endif void lcd_enable_composite(bool enable) { /* Pin 39 appears to be related to the composite output */ /* 39: output, non-inverted, no-irq, falling edge, no-chat, normal */ dm320_set_io(39, false, false, false, false, false, 0x00); short vidtemp = (IO_VID_ENC_VMOD & 0x7E8); if(enable) { IO_GIO_BITSET2 = 0x80; vidtemp |= 0x0003; } else { IO_GIO_BITCLR2 = 0x80; vidtemp |= 0x2015; IO_VID_ENC_DCLKCTL = 0x0800; IO_VID_ENC_DCLKPTN0 = 0x0001; } IO_VID_ENC_VMOD = vidtemp; } /* Note this is expecting a screen size of 480x640 or 240x320, other screen * sizes need to be considered for fudge factors */ #define LCD_FUDGE LCD_NATIVE_WIDTH%32 /* LCD init - based on code from ingenient-bsp/bootloader/board/dm320/splash.c * and code by Catalin Patulea from the M:Robe 500i linux port */ void lcd_init_device(void) { unsigned int addr; /* LCD related pins: * 32 - LED above LCD * 34 - R2 for 18 bit output * 35 - Resolution (MO?) * 36 - LCD power (INI?) * 37 - Backlight and LCD power * 38 - B2 for 18 bit output */ /* Setup main LCD pins */ /* 32: output, non-inverted, no-irq, falling edge, no-chat, normal */ dm320_set_io(32, false, false, false, false, false, 0x00); IO_GIO_BITCLR2 = 1; /* Turn the LED off */ /* 34: output, non-inverted, no-irq, falling edge, no-chat, R2 */ dm320_set_io(34, false, false, false, false, false, 0x02); /* 35: output, non-inverted, no-irq, falling edge, no-chat, normal */ dm320_set_io(35, false, false, false, false, false, 0x00); #if LCD_NATIVE_HEIGHT > 320 IO_GIO_BITSET2 = 1<<3; /* Set LCD resolution to VGA */ #else IO_GIO_BITCLR2 = 1<<3; /* Set LCD resolution to QVGA */ #endif /* 36: output, non-inverted, no-irq, falling edge, no-chat, normal */ dm320_set_io(36, false, false, false, false, false, 0x00); IO_GIO_BITSET2 = 0x10; /* LCD on */ /* 37: output, non-inverted, no-irq, falling edge, no-chat, normal */ dm320_set_io(37, false, false, false, false, false, 0x00); IO_GIO_BITCLR2 = (1 << 5); /* output low (backlight/lcd on) */ /* 38: output, non-inverted, no-irq, falling edge, no-chat, B2 */ dm320_set_io(38, false, false, false, false, false, 0x02); /* Enable clocks for display */ IO_CLK_MOD1 |= (CLK_MOD1_VENC | CLK_MOD1_OSD); /* Clear the Frame */ memset16(FRAME, 0x0000, LCD_WIDTH*LCD_HEIGHT); IO_OSD_OSDWINMD0 &= ~(0x0001); IO_OSD_VIDWINMD &= ~(0x0001); /* Setup the LCD controller */ IO_VID_ENC_VMOD = 0x2014; IO_VID_ENC_VDCTL = 0x2000; IO_VID_ENC_VDPRO = 0x0000; IO_VID_ENC_SYNCTL = 0x100E; IO_VID_ENC_HSPLS = 1; /* HSYNC pulse width */ IO_VID_ENC_VSPLS = 1; /* VSYNC pulse width */ /* These calculations support 640x480 and 320x240 (based on OF) */ IO_VID_ENC_HINT = LCD_NATIVE_WIDTH+LCD_NATIVE_WIDTH/3; IO_VID_ENC_HSTART = LCD_NATIVE_WIDTH/6; /* Back porch */ IO_VID_ENC_HVALID = LCD_NATIVE_WIDTH; /* Data valid */ IO_VID_ENC_VINT = LCD_NATIVE_HEIGHT+8; IO_VID_ENC_VSTART = 2; IO_VID_ENC_VVALID = LCD_NATIVE_HEIGHT; IO_VID_ENC_HSDLY = 0x0000; IO_VID_ENC_VSDLY = 0x0000; IO_VID_ENC_YCCTL = 0x0000; IO_VID_ENC_RGBCTL = 0x0000; IO_VID_ENC_RGBCLP = 0xFF00; IO_VID_ENC_LNECTL = 0x0000; IO_VID_ENC_CULLLNE = 0x0000; IO_VID_ENC_LCDOUT = 0x0000; IO_VID_ENC_BRTS = 0x0000; IO_VID_ENC_BRTW = 0x0000; IO_VID_ENC_ACCTL = 0x0000; IO_VID_ENC_PWMP = 0x0000; IO_VID_ENC_PWMW = 0x0000; /* Setup the display */ IO_OSD_MODE = 0x00ff; IO_OSD_ATRMD = 0x0000; IO_OSD_RECTCUR = 0x0000; IO_OSD_BASEPX = IO_VID_ENC_HSTART; IO_OSD_BASEPY = IO_VID_ENC_VSTART; addr = ((int)FRAME-CONFIG_SDRAM_START) / 32; /* Setup the OSD windows */ /* Used for 565 RGB */ IO_OSD_OSDWINMD0 = 0x30C0; IO_OSD_OSDWIN0OFST = LCD_NATIVE_WIDTH *2 / 32; IO_OSD_OSDWINADH = addr >> 16; IO_OSD_OSDWIN0ADL = addr & 0xFFFF; IO_OSD_OSDWIN0XP = 0; IO_OSD_OSDWIN0YP = 0; /* read from OF */ IO_OSD_OSDWIN0XL = LCD_NATIVE_WIDTH; IO_OSD_OSDWIN0YL = LCD_NATIVE_HEIGHT; /* Unused */ IO_OSD_OSDWINMD1 = 0x10C0; #if LCD_NATIVE_WIDTH%32!=0 IO_OSD_OSDWIN1OFST = LCD_NATIVE_WIDTH / 32+1; #else IO_OSD_OSDWIN1OFST = LCD_NATIVE_WIDTH / 32; #endif IO_OSD_OSDWIN1ADL = addr & 0xFFFF; IO_OSD_OSDWIN1XP = 0; IO_OSD_OSDWIN1YP = 0; IO_OSD_OSDWIN1XL = LCD_NATIVE_WIDTH; IO_OSD_OSDWIN1YL = LCD_NATIVE_HEIGHT; IO_OSD_VIDWINMD = 0x0000; addr = ((int)FRAME2-CONFIG_SDRAM_START + 2*(LCD_NATIVE_WIDTH*(LCD_NATIVE_HEIGHT-320)/2+ (LCD_NATIVE_WIDTH-240)/2))/ 32; /* This is a bit messy, the LCD transfers appear to happen in chunks of 32 * pixels. (based on OF) */ #if LCD_NATIVE_WIDTH%32!=0 IO_OSD_VIDWIN0OFST = LCD_NATIVE_WIDTH * 2 / 32+1; #else IO_OSD_VIDWIN0OFST = LCD_NATIVE_WIDTH * 2 / 32; #endif IO_OSD_VIDWINADH = addr >> 16; IO_OSD_VIDWIN0ADL = addr & 0xFFFF; IO_OSD_VIDWIN0XP = 0; IO_OSD_VIDWIN0YP = 0; IO_OSD_VIDWIN0XL = LCD_NATIVE_WIDTH; IO_OSD_VIDWIN0YL = LCD_NATIVE_HEIGHT; IO_OSD_OSDWINMD0 |= 0x01; lcd_enable_composite(false); } #if defined(HAVE_LCD_MODES) void lcd_set_mode(int mode) { if(mode==LCD_MODE_YUV) { /* Turn off the RGB buffer and enable the YUV buffer with zoom */ IO_OSD_OSDWINMD0 |= 0x04; IO_OSD_VIDWINMD |= 0x01; #if LCD_NATIVE_WIDTH > 240 IO_OSD_VIDWINMD |= (0x05<<2); /* This does a 2x zoom */ #endif memset16(FRAME2, 0x0080, LCD_NATIVE_HEIGHT*(LCD_NATIVE_WIDTH+LCD_FUDGE)); } else if(mode==LCD_MODE_RGB565) { /* Turn on the RGB window, set it to 16 bit and turn YUV window off */ IO_OSD_VIDWINMD &= ~(0x01); IO_OSD_OSDWIN0OFST = LCD_NATIVE_WIDTH / 16; IO_OSD_OSDWINMD0 |= (1<<13); IO_OSD_OSDWINMD0 &= ~0x04; lcd_clear_display(); } else if(mode==LCD_MODE_PAL256) { #if LCD_NATIVE_WIDTH%32!=0 IO_OSD_OSDWIN0OFST = LCD_NATIVE_WIDTH / 32+1; #else IO_OSD_OSDWIN0OFST = LCD_NATIVE_WIDTH / 32; #endif IO_OSD_VIDWINMD &= ~(0x01); IO_OSD_OSDWINMD0 &= ~(1<<13); IO_OSD_OSDWINMD0 |= 0x01; } } #endif #if defined(LCD_USE_DMA) static void dma_start_transfer16( char *src, int src_x, int src_y, int stride, int x, int y, int width, int height, int pix_width) __attribute__ ((section(".icode"))); #if CONFIG_ORIENTATION == SCREEN_PORTRAIT static void dma_start_transfer16( char *src, int src_x, int src_y, int stride, int x, int y, int width, int height, int pix_width) { char *dst; /* Addresses are relative to start of SDRAM */ src = src + (src_y*LCD_HEIGHT + src_x) * pix_width; dst = (char *)FRAME + (y * LCD_HEIGHT + x) * pix_width; /* Flush the area that is being copied from. */ clean_dcache_range(src, (stride*pix_width*width)); /* Addresses are relative to start of SDRAM */ src -= CONFIG_SDRAM_START; dst -= CONFIG_SDRAM_START; /* Enable Clocks */ IO_CLK_MOD1 |= 1<<8; COP_CP_CLKC |= 0x0001; /* ... */ COP_BUF_MUX1 = 0x0005; /* Give the DMA access to the buffer */ COP_BUF_MUX0 = 0x0663; /* Setup buffer offsets and transfer width/height */ COP_BUF_LOFST = width; COP_DMA_XNUM = width; COP_DMA_YNUM = 1; /* ... */ COP_IMG_MODE = 0x0000; /* Set the start address of buffer */ COP_BUF_ADDR = 0x0000; /* Setup SDRAM stride */ COP_SDEM_LOFST = stride; do { int addr; addr = (int)src; addr >>= 1; /* Addresses are in 16-bit words */ /* Setup the registers to initiate the read from SDRAM */ COP_SDEM_ADDRH = addr >> 16; COP_SDEM_ADDRL = addr & 0xFFFF; /* Set direction and start */ COP_DMA_CTRL = 0x0001; COP_DMA_CTRL |= 0x0003; /* Wait for read to finish */ while(COP_DMA_CTRL & 0x02) {}; addr = (int)dst; addr >>= 1; COP_SDEM_ADDRH = addr >> 16; COP_SDEM_ADDRL = addr & 0xFFFF; /* Set direction and start transfer */ COP_DMA_CTRL = 0x0000; COP_DMA_CTRL = 0x0002; /* Wait for the transfer to complete */ while(COP_DMA_CTRL & 0x02) {}; /* Decrease height, update pointers/counters */ src += (stride*pix_width); dst += (stride*pix_width); height--; } while(height>0); } #else static void dma_start_transfer16( char *src, int src_x, int src_y, int stride, int x, int y, int width, int height, int pix_width) { char *dst; /* Calculate starting place */ src = src + (src_x*LCD_HEIGHT + src_y) * pix_width; dst = (char *)FRAME + (LCD_HEIGHT*(LCD_WIDTH-1) - x * LCD_HEIGHT + y) * pix_width; /* Flush the area that is being copied from. */ clean_dcache_range(src, (stride*pix_width*width)); /* Addresses are relative to start of SDRAM */ src -= CONFIG_SDRAM_START; dst -= CONFIG_SDRAM_START; /* Enable Clocks */ IO_CLK_MOD1 |= 1<<8; COP_CP_CLKC |= 0x0001; /* ... */ COP_BUF_MUX1 = 0x0005; /* Give the DMA access to the buffer */ COP_BUF_MUX0 = 0x0663; /* Setup buffer offsets and transfer width/height */ COP_BUF_LOFST = height; COP_DMA_XNUM = height; COP_DMA_YNUM = 1; /* ... */ COP_IMG_MODE = 0x0000; /* Set the start address of buffer */ COP_BUF_ADDR = 0x0000; /* Setup SDRAM stride */ COP_SDEM_LOFST = stride; do { int addr; addr = (int)src; addr >>= 1; /* Addresses are in 16-bit words */ /* Setup the registers to initiate the read from SDRAM */ COP_SDEM_ADDRH = addr >> 16; COP_SDEM_ADDRL = addr & 0xFFFF; /* Set direction and start */ COP_DMA_CTRL = 0x0001; COP_DMA_CTRL |= 0x0003; /* Wait for read to finish */ while(COP_DMA_CTRL & 0x02) {}; addr = (int)dst; addr >>= 1; COP_SDEM_ADDRH = addr >> 16; COP_SDEM_ADDRL = addr & 0xFFFF; /* Set direction and start transfer */ COP_DMA_CTRL = 0x0000; COP_DMA_CTRL = 0x0002; /* Wait for the transfer to complete */ while(COP_DMA_CTRL & 0x02) {}; /* update the width, update pointers/counters */ src += (stride*pix_width); dst -= (stride*pix_width); width--; } while(width>0); } #endif #endif /* Update a fraction of the display. */ void lcd_update_rect(int x, int y, int width, int height) __attribute__ ((section(".icode"))); void lcd_update_rect(int x, int y, int width, int height) { if (!lcd_on) return; if ( (width | height) < 0) return; /* nothing left to do */ if (x + width > LCD_WIDTH) width = LCD_WIDTH - x; /* Clip right */ if (x < 0) width += x, x = 0; /* Clip left */ if (y + height > LCD_HEIGHT) height = LCD_HEIGHT - y; /* Clip bottom */ if (y < 0) height += y, y = 0; /* Clip top */ #if CONFIG_ORIENTATION == SCREEN_PORTRAIT #if defined(LCD_USE_DMA) dma_start_transfer16( (char *)lcd_framebuffer, x, y, LCD_WIDTH, x, y, width, height, 2); #else register fb_data *dst; dst = (fb_data *)FRAME + LCD_WIDTH*y + x; /* Copy part of the Rockbox framebuffer to the second framebuffer */ if (width < LCD_WIDTH) { /* Not full width - do line-by-line */ lcd_copy_buffer_rect(dst, &lcd_framebuffer[y][x], width, height); } else { /* Full width - copy as one line */ lcd_copy_buffer_rect(dst, &lcd_framebuffer[y][x], LCD_WIDTH*height, 1); } #endif #else #if defined(LCD_STRIDEFORMAT) && LCD_STRIDEFORMAT == VERTICAL_STRIDE #if defined(LCD_USE_DMA) dma_start_transfer16( (char *)lcd_framebuffer, x, y, LCD_HEIGHT, x, y, width, height, 2); #else fb_data *src; fb_data *dst; src = &lcd_framebuffer[0][0] + (x*LCD_HEIGHT + y); dst = FRAME + (LCD_HEIGHT*(LCD_WIDTH-1) - x * LCD_HEIGHT + y); while(width > 0) { memcpy(src, dst, height); src += LCD_HEIGHT; dst -= LCD_HEIGHT; width--; } #endif #else register fb_data *dst, *src; src = &lcd_framebuffer[y][x]; dst=FRAME + (LCD_NATIVE_WIDTH*(LCD_NATIVE_HEIGHT-1)) - LCD_NATIVE_WIDTH*x + y ; height--; do { register int c_width=width-1; register fb_data *c_dst=dst; do { *c_dst=*src++; c_dst-=LCD_NATIVE_WIDTH; } while(c_width--); src+=LCD_WIDTH-width; dst++; } while(height--); #endif #endif } /* Update the display. This must be called after all other LCD functions that change the display. */ void lcd_update(void) __attribute__ ((section(".icode"))); void lcd_update(void) { if (!lcd_on) return; lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT); } #if defined(HAVE_LCD_MODES) && (HAVE_LCD_MODES & LCD_MODE_PAL256) void lcd_blit_pal256(unsigned char *src, int src_x, int src_y, int x, int y, int width, int height) __attribute__ ((section(".icode"))); void lcd_blit_pal256(unsigned char *src, int src_x, int src_y, int x, int y, int width, int height) { #if CONFIG_ORIENTATION == SCREEN_PORTRAIT #if defined(LCD_USE_DMA) // char *dst=(char *)FRAME+x+y*(LCD_NATIVE_WIDTH+LCD_FUDGE); dma_start_transfer16( src, src_x, src_y, LCD_WIDTH, x, y, width, height, 1); #else char *dst=(char *)FRAME+x+y*(LCD_NATIVE_WIDTH+LCD_FUDGE); src = src+src_x+src_y*LCD_WIDTH; while(height--) { memcpy(dst, src, width); dst = dst + ((LCD_WIDTH -x +LCD_FUDGE)); src = src + (LCD_WIDTH - x); } #endif #else char *dst=(char *)FRAME + (LCD_NATIVE_WIDTH+LCD_FUDGE)*(LCD_NATIVE_HEIGHT-1) - (LCD_NATIVE_WIDTH+LCD_FUDGE)*x + y; src=src+src_x+src_y*width; while(height--) { register char *c_src=src; register char *c_dst=dst; register int c_width=width; while (c_width--) { *c_dst = *c_src++; c_dst -= (LCD_NATIVE_WIDTH+LCD_FUDGE); } dst++; src+=width; } #endif } void lcd_pal256_update_pal(fb_data *palette) { unsigned char i; for(i=0; i< 255; i++) { int y, cb, cr; unsigned char r=RGB_UNPACK_RED_LCD(palette[i])<<3; unsigned char g=RGB_UNPACK_GREEN_LCD(palette[i])<<2; unsigned char b=RGB_UNPACK_BLUE_LCD(palette[i])<<3; y = ((77 * r + 150 * g + 29 * b) >> 8); cb = ((-43 * r - 85 * g + 128 * b) >> 8) + 128; cr = ((128 * r - 107 * g - 21 * b) >> 8) + 128; while(IO_OSD_MISCCTL&0x08) {}; /* Write in y and cb */ IO_OSD_CLUTRAMYCB= ((unsigned char)y << 8) | (unsigned char)cb; /* Write in the index and cr */ IO_OSD_CLUTRAMCR=((unsigned char)cr << 8) | i; } } #endif /* Performance function to blit a YUV bitmap directly to the LCD */ /* Show it rotated so the LCD_WIDTH is now the height */ void lcd_blit_yuv(unsigned char * const src[3], int src_x, int src_y, int stride, int x, int y, int width, int height) { unsigned char const * yuv_src[3]; if (!lcd_on) return; /* y has to be on a 16 pixel boundary */ y &= ~0xF; if( ((y | x | height | width ) < 0) || y>LCD_NATIVE_HEIGHT || x>LCD_NATIVE_WIDTH ) return; if(y+height>LCD_NATIVE_WIDTH) { height=LCD_NATIVE_WIDTH-y; } if(x+width>LCD_NATIVE_HEIGHT) { width=LCD_NATIVE_HEIGHT-x; } /* Sorry, but width and height must be >= 2 or else */ width &= ~1; height>>=1; fb_data * dst = FRAME2 + ((LCD_NATIVE_WIDTH+LCD_FUDGE)*(LCD_NATIVE_HEIGHT-1)) - (LCD_NATIVE_WIDTH+LCD_FUDGE)*x + y ; /* Scope z */ { off_t z; z = stride*src_y; yuv_src[0] = src[0] + z + src_x; yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1); yuv_src[2] = src[2] + (yuv_src[1] - src[1]); } int cbcr_remain=(stride>>1)-(width>>1); int y_remain=(stride<<1)-width; do { register int c_width=width; register unsigned int *c_dst=(unsigned int*)dst; do { register unsigned short Y=*((unsigned short*)yuv_src[0]); register unsigned short Yst=*((unsigned short*)(yuv_src[0]+stride)); yuv_src[0]+=2; register unsigned char Cb=*yuv_src[1]++; register unsigned char Cr=*yuv_src[2]++; *c_dst = (Yst<<24) | (Cr << 16) | ((Y&0xFF)<<8) | Cb; *(c_dst - (LCD_NATIVE_WIDTH+LCD_FUDGE)/2) = ( (Yst&0xFF00)<<16) | (Cr << 16) | (Y&0xFF00) | Cb; c_dst -= (LCD_NATIVE_WIDTH+LCD_FUDGE); c_width -= 2; } while (c_width > 0); yuv_src[0] += y_remain; /* Skip down two luma lines-width */ yuv_src[1] += cbcr_remain; /* Skip down one chroma line-width/2 */ yuv_src[2] += cbcr_remain; dst+=2; } while (--height > 0); } void lcd_set_contrast(int val) { (void) val; // TODO: } void lcd_set_invert_display(bool yesno) { (void) yesno; // TODO: } void lcd_set_flip(bool yesno) { (void) yesno; // TODO: }