/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Linus Nielsen Feltzing * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* Arm bootloader and startup code based on startup.s from the iPodLinux loader * * Copyright (c) 2003, Daniel Palffy (dpalffy (at) rainstorm.org) * Copyright (c) 2005, Bernard Leach * */ #include "config.h" #include "cpu.h" .section .init.text,"ax",%progbits .extern irq .extern fiq .extern UIE .extern main .global start /* Telechips firmware files start with a 32-byte header, as part of the code. */ start: #ifdef TCCBOOT /* Add -DTCCBOOT to EXTRA_DEFINES in the bootloader Makefile to enable building the bootloader to be appended to the end of the original firmware, dual-booting based on a key-press. The following two values are filled in by mktccboot. */ of_entrypoint: .word 0 /* Saved entrypoint of original firmware*/ bl_entrypoint: .word 0 /* Location in RAM of the start of our bootloader */ #else // ldr pc, =start_loc /* jump to the main entry point */ b start_loc .word 0xffff0601 /* Unknown magic */ .word 0x3a726556 /* "Ver:" */ .word 0x31373030 /* "0071" */ .word 0 /* First CRC32 */ .word 0 /* Unknown - always 0 */ .word 0 /* Second CRC32 */ .word 0 /* length of firmware file */ #if defined(LOGIK_DAX) || defined(SANSA_C100) /* Some original firmwares have 0x40 bytes of zeroes here - we don't know why, but err on the side of caution and include it here. */ .space 0x40 #endif #endif start_loc: #ifdef BOOTLOADER /* If we are appended to the OF (i.e. dual-booting), do a simple GPIO button check, and branch to the OF's entry point (saved by mktccboot) if not active */ #ifdef TCCBOOT mov r0, #0x80000000 #if defined(LOGIK_DAX) || defined(SANSA_C100) ldr r0, [r0, #0x300] /* Hold button is GPIO A, pin 0x2 */ tst r0, #0x2 #elif defined(SANSA_M200) ldr r0, [r0, #0x310] /* Hold button is GPIO B, pin 0x200 */ tst r0, #0x200 #elif defined(IAUDIO_7) ldr r0, [r0, #0x300] /* Hold button is !GPIO A, pin 0x2 */ tst r0, #0x2 #else #error No bootup key detection implemented for this target #endif ldrne pc, of_entrypoint /* Jump to OF if HOLD button not pressed */ #endif /* TCCBOOT */ /* We are now definitely executing the bootloader, so we relocate to the linked address (see boot.lds) - 1MB from the end of DRAM. */ #ifdef TCCBOOT ldr r0, bl_entrypoint #else mov r0, #0x20000000 /* Otherwise, load address is the start of DRAM */ #endif mov r1, #0x20000000 /* Destination: 1MB from end of DRAM */ add r1, r1, #((MEM - 1) * 0x100000) ldr r2, =_dataend 1: cmp r2, r1 ldrhi r3, [r0], #4 strhi r3, [r1], #4 bhi 1b ldr pc, =copied_start /* jump to the relocated start_loc: */ copied_start: #endif /* BOOTLOADER */ /* Set up stack for IRQ mode */ mov r0,#0xd2 msr cpsr, r0 ldr sp, =irq_stack /* Set up stack for FIQ mode */ mov r0,#0xd1 msr cpsr, r0 ldr sp, =fiq_stack #ifndef BOOTLOADER /* Load the banked FIQ mode registers with useful values here. These values will be used in the FIQ handler in pcm-telechips.c */ .equ DADO_BASE, 0x80000020 ldr r10, =DADO_BASE ldr r11, =dma_play_data #endif /* Let abort and undefined modes use IRQ stack */ mov r0,#0xd7 msr cpsr, r0 ldr sp, =irq_stack mov r0,#0xdb msr cpsr, r0 ldr sp, =irq_stack /* Switch to supervisor mode */ mov r0,#0xd3 msr cpsr, r0 ldr sp, =stackend /* Copy exception handler code to address 0 */ mov r2, #0x0 ldr r3, =vectors_start ldr r4, =vectors_end 1: cmp r4, r3 ldrhi r5, [r3], #4 strhi r5, [r2], #4 bhi 1b /* Initialise bss section to zero */ ldr r2, =_edata ldr r3, =_end mov r4, #0 1: cmp r3, r2 strhi r4, [r2], #4 bhi 1b /* Set up some stack and munge it with 0xdeadbeef */ ldr sp, =stackend mov r3, sp ldr r2, =stackbegin ldr r4, =0xdeadbeef 1: cmp r3, r2 strhi r4, [r2], #4 bhi 1b bl main /* main() should never return */ /* Exception handlers. Will be copied to address 0 after memory remapping */ vectors_start: ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] ldr pc, [pc, #24] /* Exception vectors */ .global vectors vectors: .word start .word undef_instr_handler .word software_int_handler .word prefetch_abort_handler .word data_abort_handler .word reserved_handler .word irq_handler .word fiq_handler vectors_end: .text /* All illegal exceptions call into UIE with exception address as first parameter. This is calculated differently depending on which exception we're in. Second parameter is exception number, used for a string lookup in UIE. */ undef_instr_handler: mov r0, lr mov r1, #0 b UIE /* We run supervisor mode most of the time, and should never see a software exception being thrown. Perhaps make it illegal and call UIE? */ software_int_handler: reserved_handler: movs pc, lr prefetch_abort_handler: sub r0, lr, #4 mov r1, #1 b UIE data_abort_handler: sub r0, lr, #8 mov r1, #2 b UIE irq_handler: stmfd sp!, {r0-r3, r12, lr} bl irq ldmfd sp!, {r0-r3, r12, lr} subs pc, lr, #4 /* Align stacks to cache line boundary */ .balign 16 /* 256 words of IRQ stack */ .space 256*4 irq_stack: /* 256 words of FIQ stack */ .space 256*4 fiq_stack: