/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2009 by Michael Sevakis * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef SDMA_IMX31_H #define SDMA_IMX31_H /* Much of the code in here is based upon the Linux BSP provided by Freescale * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. */ /* Peripheral and transfer type - used to select the proper SDMA channel * script to execute. */ enum SDMA_PERIPHERAL_TYPE { __SDMA_PER_FIRST = -1, SDMA_PER_MEMORY, SDMA_PER_DSP, SDMA_PER_FIRI, SDMA_PER_UART, SDMA_PER_UART_SP, /* Shared */ SDMA_PER_ATA, SDMA_PER_CSPI, SDMA_PER_EXT, SDMA_PER_SSI, SDMA_PER_SSI_SP, /* Shared */ SDMA_PER_MMC, SDMA_PER_SDHC, SDMA_PER_CSPI_SP, /* Shared */ SDMA_PER_MSHC, SDMA_PER_MSHC_SP, /* Shared */ SDMA_PER_CCM, SDMA_PER_ASRC, SDMA_PER_ESAI, SDMA_PER_SIM, SDMA_PER_SPDIF, SDMA_PER_IPU_MEMORY, }; enum SDMA_TRANSFER_TYPE { __SDMA_TRAN_FIRST = -1, SDMA_TRAN_INT_2_INT, SDMA_TRAN_EMI_2_INT, SDMA_TRAN_EMI_2_EMI, SDMA_TRAN_INT_2_EMI, SDMA_TRAN_INT_2_DSP, SDMA_TRAN_DSP_2_INT, SDMA_TRAN_DSP_2_DSP, SDMA_TRAN_DSP_2_PER, SDMA_TRAN_PER_2_DSP, SDMA_TRAN_EMI_2_DSP, SDMA_TRAN_DSP_2_EMI, SDMA_TRAN_DSP_2_EMI_LOOP, SDMA_TRAN_EMI_2_DSP_LOOP, SDMA_TRAN_PER_2_INT, SDMA_TRAN_PER_2_EMI, SDMA_TRAN_INT_2_PER, SDMA_TRAN_EMI_2_PER, }; /* 2.3 - Smart Direct Memory Access (SDMA) Events, Table 2-5 */ /* These are indexes into the SDMA_CHNENBL register array (each a bitmask * determining which channels are triggered by requests). */ enum SDMA_REQUEST_TYPE { SDMA_REQ_EXT0 = 0, /* Extern DMA request from MCU1_0 */ SDMA_REQ_CCM = 1, /* DVFS/DPTC event (ccm_dvfs_sdma_int) */ SDMA_REQ_ATA_TX_END = 2, /* ata_txfer_end_alarm (event_id) */ SDMA_REQ_ATA_TX = 3, /* ata_tx_fifo_alarm (event_id2) */ SDMA_REQ_ATA_RX = 4, /* ata_rcv_fifo_alarm (event_id2) */ SDMA_REQ_SIM = 5, /* */ SDMA_REQ_CSPI2_RX = 6, /* DMA Rx request */ SDMA_REQ_CSPI2_TX = 7, /* DMA Tx request */ SDMA_REQ_CSPI1_RX = 8, /* DMA Rx request of CSPI */ SDMA_REQ_UART3_RX = 8, /* DMA Rx request RxFIFO of UART3 */ SDMA_REQ_CSPI1_TX = 9, /* DMA Tx request of CSPI */ SDMA_REQ_UART3_TX = 9, /* DMA Tx request TxFIFO of UART3 */ SDMA_REQ_CSPI3_RX = 10, /* RxFIFO or CSPI3 Rx request */ SDMA_REQ_UART5_RX = 10, /* RxFIFO or CSPI3 Rx request */ SDMA_REQ_CSPI3_TX = 11, /* TxFIFO or CSPI3 Tx request */ SDMA_REQ_UART5_TX = 11, /* TxFIFO or CSPI3 Tx request */ SDMA_REQ_UART4_RX = 12, /* RxFIFO */ SDMA_REQ_UART4_TX = 13, /* TxFIFO */ SDMA_REQ_EXT2 = 14, /* External DMA request from MCU1_2 or from MBX (Graphic accelerator) */ SDMA_REQ_EXT1 = 15, /* External request from MCU1_1 */ SDMA_REQ_FIRI_RX = 16, /* DMA request of FIR's receiver FIFO controlled by the pgp_firi signal from the IOMUXC PGP register */ SDMA_REQ_UART2_RX = 16, /* RxFIFO of UART2 */ SDMA_REQ_FIRI_TX = 17, /* DMA request of FIR's transmitter FIFO controled by the pgp_firi signal the IOMUXC PGP register */ SDMA_REQ_UART2_TX = 17, /* TxFIFO of UART2 */ SDMA_REQ_UART1_RX = 18, /* RxFIFO */ SDMA_REQ_UART1_TX = 19, /* TxFIFO */ SDMA_REQ_MMC1 = 20, /* MMC DMA request */ SDMA_REQ_SDHC1 = 20, /* SDHC1 DMA request */ SDMA_REQ_MSHC1 = 20, /* MSHC1 DMA request */ SDMA_REQ_MMC2 = 21, /* MMC DMA request */ SDMA_REQ_SDHC2 = 21, /* SDHC2 DMA request */ SDMA_REQ_MSHC2 = 21, /* MSHC2 DMA request */ SDMA_REQ_SSI2_RX2 = 22, /* SSI #2 receive 2 DMA request (SRX1_2) */ SDMA_REQ_SSI2_TX2 = 23, /* SSI #2 transmit 2 DMA request (STX1_2) */ SDMA_REQ_SSI2_RX1 = 24, /* SSI #2 receive 1 DMA request (SRX0_2) */ SDMA_REQ_SSI2_TX1 = 25, /* SSI #2 transmit 1 DMA request (STX0_2) */ SDMA_REQ_SSI1_RX2 = 26, /* SSI #1 receive 2 DMA request (SRX1_1) */ SDMA_REQ_SSI1_TX2 = 27, /* SSI #1 transmit 2 DMA request (STX1_1) */ SDMA_REQ_SSI1_RX1 = 28, /* SSI #1 receive 1 DMA request (SRX1_0) */ SDMA_REQ_SSI1_TX1 = 29, /* SSI #1 transmit 1 DMA request (STX1_0) */ SDMA_REQ_NFC = 30, /* NAND-flash controller */ SDMA_REQ_IPU = 31, /* IPU source (defaults to IPU at reset) */ SDMA_REQ_ECT = 31, /* ECT source */ }; /* Addresses for peripheral DMA transfers */ enum SDMA_PER_ADDR { SDMA_PER_ADDR_SDRAM = SDRAM_BASE_ADDR, /* memory */ SDMA_PER_ADDR_CCM = CCM_BASE_ADDR+0x00, /* CCMR */ /* ATA */ SDMA_PER_ADDR_ATA_TX = ATA_DMA_BASE_ADDR+0x18, SDMA_PER_ADDR_ATA_RX = ATA_DMA_BASE_ADDR, #if 0 SDMA_PER_ADDR_ATA_TX16 = SDMA_PER_ADDR_ATA_RX16 = #endif #if 0 SDMA_PER_ADDR_SIM = #endif /* CSPI2 */ SDMA_PER_ADDR_CSPI2_RX = CSPI2_BASE_ADDR+0x00, /* RXDATA2 */ SDMA_PER_ADDR_CSPI2_TX = CSPI2_BASE_ADDR+0x04, /* TXDATA2 */ /* CSPI1 */ SDMA_PER_ADDR_CSPI1_RX = CSPI1_BASE_ADDR+0x00, /* RXDATA1 */ SDMA_PER_ADDR_CSPI1_TX = CSPI1_BASE_ADDR+0x04, /* TXDATA1 */ /* UART3 */ SDMA_PER_ADDR_UART3_RX = UART3_BASE_ADDR+0x00, /* URXD3 */ SDMA_PER_ADDR_UART3_TX = UART3_BASE_ADDR+0x40, /* UTXD3 */ /* CSPI3 */ SDMA_PER_ADDR_CSPI3_RX = CSPI3_BASE_ADDR+0x00, /* RXDATA3 */ SDMA_PER_ADDR_CSPI3_TX = CSPI3_BASE_ADDR+0x04, /* TXDATA3 */ /* UART5 */ SDMA_PER_ADDR_UART5_RX = UART5_BASE_ADDR+0x00, /* URXD5 */ SDMA_PER_ADDR_UART5_TX = UART5_BASE_ADDR+0x40, /* UTXD5 */ /* UART4 */ SDMA_PER_ADDR_UART4_RX = UART4_BASE_ADDR+0x00, /* URXD4 */ SDMA_PER_ADDR_UART4_TX = UART4_BASE_ADDR+0x40, /* UTXD4 */ /* FIRI */ SDMA_PER_ADDR_FIRI_RX = FIRI_BASE_ADDR+0x18, /* Receiver FIFO */ SDMA_PER_ADDR_FIRI_TX = FIRI_BASE_ADDR+0x14, /* Transmitter FIFO */ /* UART2 */ SDMA_PER_ADDR_UART2_RX = UART2_BASE_ADDR+0x00, /* URXD2 */ SDMA_PER_ADDR_UART2_TX = UART2_BASE_ADDR+0x40, /* UTXD2 */ /* UART1 */ SDMA_PER_ADDR_UART1_RX = UART1_BASE_ADDR+0x00, /* URXD1 */ SDMA_PER_ADDR_UART1_TX = UART1_BASE_ADDR+0x40, /* UTXD1 */ SDMA_PER_ADDR_MMC_SDHC1 = MMC_SDHC1_BASE_ADDR+0x38, /* BUFFER_ACCESS */ SDMA_PER_ADDR_MMC_SDHC2 = MMC_SDHC2_BASE_ADDR+0x38, /* BUFFER_ACCESS */ #if 0 SDMA_PER_ADDR_MSHC1 = SDMA_PER_ADDR_MSHC2 = #endif /* SSI2 */ SDMA_PER_ADDR_SSI2_RX2 = SSI2_BASE_ADDR+0x0C, /* SRX1_2 */ SDMA_PER_ADDR_SSI2_TX2 = SSI2_BASE_ADDR+0x04, /* STX1_2 */ SDMA_PER_ADDR_SSI2_RX1 = SSI2_BASE_ADDR+0x08, /* SRX0_2 */ SDMA_PER_ADDR_SSI2_TX1 = SSI2_BASE_ADDR+0x00, /* STX0_2 */ /* SSI1 */ SDMA_PER_ADDR_SSI1_RX2 = SSI1_BASE_ADDR+0x0C, /* SRX1_1 */ SDMA_PER_ADDR_SSI1_TX2 = SSI1_BASE_ADDR+0x04, /* STX1_1 */ SDMA_PER_ADDR_SSI1_RX1 = SSI1_BASE_ADDR+0x08, /* SRX0_1 */ SDMA_PER_ADDR_SSI1_TX1 = SSI1_BASE_ADDR+0x00, /* STX0_1 */ #if 0 SDMA_PER_ADDR_NFC = SDMA_PER_ADDR_IPU = SDMA_PER_ADDR_ECT = #endif }; /* DMA driver defines */ #define SDMA_SDHC_MMC_WML 16 #define SDMA_SDHC_SD_WML 64 #define SDMA_SSI_TXFIFO_WML 4 /* Four samples written per channel activation */ #define SDMA_SSI_RXFIFO_WML 6 /* Six samples read per channel activation */ #define SDMA_FIRI_WML 16 #define SDMA_ATA_WML 32 /* DMA watermark level in bytes */ #define SDMA_ATA_BD_NR (512/3/4) /* Number of BDs per channel */ #include "sdma_struct.h" void sdma_init(void); void sdma_read_words(unsigned long *buf, unsigned long start, int count); void sdma_write_words(const unsigned long *buf, unsigned long start, int count); void sdma_channel_set_priority(unsigned int channel, unsigned int priority); void sdma_channel_start(unsigned int channel); void sdma_channel_run(unsigned int channel); void sdma_channel_pause(unsigned int channel); void sdma_channel_stop(unsigned int channel); void sdma_channel_wait_nonblocking(unsigned int channel); bool sdma_channel_init(unsigned int channel, struct channel_descriptor *cd_p, struct buffer_descriptor *base_bd_p); void sdma_channel_close(unsigned int channel); #endif /* SDMA_IMX31_H */