/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Will Robertson * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "cpu.h" #include "kernel.h" #include "thread.h" #include "system.h" #include "power.h" #include "panic.h" #include "ata.h" #include "ata-target.h" #include "ccm-imx31.h" #ifdef HAVE_ATA_DMA #include "sdma-imx31.h" #include "mmu-imx31.h" #endif /* PIO modes timing info */ static const struct ata_pio_timings { uint16_t time_2w; /* t2 during write */ uint16_t time_2r; /* t2 during read */ uint8_t time_ax; /* tA */ uint8_t time_1; /* t1 */ uint8_t time_4; /* t4 */ uint8_t time_9; /* t9 */ } pio_timings[5] = { [0] = /* PIO mode 0 */ { .time_1 = 70, .time_2w = 290, .time_2r = 290, .time_ax = 35, .time_4 = 30, .time_9 = 20 }, [1] = /* PIO mode 1 */ { .time_1 = 50, .time_2w = 290, .time_2r = 290, .time_ax = 35, .time_4 = 20, .time_9 = 15 }, [2] = /* PIO mode 2 */ { .time_1 = 30, .time_2w = 290, .time_2r = 290, .time_ax = 35, .time_4 = 15, .time_9 = 10 }, [3] = /* PIO mode 3 */ { .time_1 = 30, .time_2w = 80, .time_2r = 80, .time_ax = 35, .time_4 = 10, .time_9 = 10 }, [4] = /* PIO mode 4 */ { .time_1 = 25, .time_2w = 70, .time_2r = 70, .time_ax = 35, .time_4 = 10, .time_9 = 10 } }; /* Track first init */ static bool initialized = false; #ifdef HAVE_ATA_DMA /* One DMA channel for reads, the other for writes othewise one channel would * have to be reinitialized every time the direction changed. (Different * SDMA scripts are used for reading or writing) */ #define ATA_DMA_CH_NUM_RD 3 #define ATA_DMA_CH_NUM_WR 4 /* Use default priority for these channels (1) - ATA isn't realtime urgent. */ /* Maximum DMA size per buffer descriptor (32-byte aligned) */ #define ATA_MAX_BD_SIZE (65534 & ~31) /* 65504 */ /* Number of buffer descriptors required for a maximum sector count trasfer. * NOTE: Assumes LBA28 and 512-byte sectors! */ #define ATA_BASE_BD_COUNT ((256*512 + (ATA_MAX_BD_SIZE-1)) / ATA_MAX_BD_SIZE) #define ATA_BD_COUNT (ATA_BASE_BD_COUNT + 2) static const struct ata_mdma_timings { uint8_t time_m; /* tM */ uint8_t time_jn; /* tH */ uint8_t time_d; /* tD */ uint8_t time_k; /* tKW */ } mdma_timings[] = { [0] = /* MDMA mode 0 */ { .time_m = 50, .time_jn = 20, .time_d = 215, .time_k = 215 }, [1] = /* MDMA mode 1 */ { .time_m = 30, .time_jn = 15, .time_d = 80, .time_k = 50 }, [2] = /* MDMA mode 2 */ { .time_m = 25, .time_jn = 10, .time_d = 70, .time_k = 25 } }; static const struct ata_udma_timings { uint8_t time_ack; /* tACK */ uint8_t time_env; /* tENV */ uint8_t time_rpx; /* tRP */ uint8_t time_zah; /* tZAH */ uint8_t time_mlix; /* tMLI */ uint8_t time_dvh; /* tDVH */ uint8_t time_dzfs; /* tDVS+tDVH? */ uint8_t time_dvs; /* tDVS */ uint8_t time_cvh; /* ?? */ uint8_t time_ss; /* tSS */ uint8_t time_cyc; /* tCYC */ } udma_timings[] = { [0] = /* UDMA mode 0 */ { .time_ack = 20, .time_env = 20, .time_rpx = 160, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 80, .time_dvs = 70, .time_cvh = 6, .time_ss = 50, .time_cyc = 114 }, [1] = /* UDMA mode 1 */ { .time_ack = 20, .time_env = 20, .time_rpx = 125, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 63, .time_dvs = 48, .time_cvh = 6, .time_ss = 50, .time_cyc = 75 }, [2] = /* UDMA mode 2 */ { .time_ack = 20, .time_env = 20, .time_rpx = 100, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 47, .time_dvs = 34, .time_cvh = 6, .time_ss = 50, .time_cyc = 55 }, [3] = /* UDMA mode 3 */ { .time_ack = 20, .time_env = 20, .time_rpx = 100, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 35, .time_dvs = 20, .time_cvh = 6, .time_ss = 50, .time_cyc = 39 }, [4] = /* UDMA mode 4 */ { .time_ack = 20, .time_env = 20, .time_rpx = 100, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 25, .time_dvs = 7, .time_cvh = 6, .time_ss = 50, .time_cyc = 25 }, #if 0 [5] = /* UDMA mode 5 (bus clock 80MHz or higher only) */ { .time_ack = 20, .time_env = 20, .time_rpx = 85, .time_zah = 20, .time_mlix = 20, .time_dvh = 6, .time_dzfs = 40, .time_dvs = 5, .time_cvh = 10, .time_ss = 50, .time_cyc = 17 } #endif }; /** Threading **/ /* Signal to tell thread when DMA is done */ static struct wakeup ata_dma_wakeup; /** SDMA **/ /* Array of buffer descriptors for large transfers and alignnment */ static struct buffer_descriptor ata_bda[ATA_BD_COUNT] DEVBSS_ATTR; /* ATA channel descriptors */ static struct channel_descriptor ata_cd_rd DEVBSS_ATTR; /* read channel */ static struct channel_descriptor ata_cd_wr DEVBSS_ATTR; /* write channel */ /* DMA channel to be started for transfer */ static unsigned int current_channel = 0; /** Buffers **/ /* Scatter buffer for first and last 32 bytes of a non cache-aligned transfer * to cached RAM. */ static uint32_t scatter_buffer[32/4*2] DEVBSS_ATTR; /* Address of ends in destination buffer for unaligned reads - copied after * DMA completes. */ static void *sb_dst[2] = { NULL, NULL }; /** Modes **/ #define ATA_DMA_MWDMA 0x00000000 /* Using multiword DMA */ #define ATA_DMA_UDMA ATA_DMA_ULTRA_SELECTED /* Using Ultra DMA */ #define ATA_DMA_PIO 0x80000000 /* Using PIO */ #define ATA_DMA_DISABLED 0x80000001 /* DMA init error - use PIO */ static unsigned long ata_dma_selected = ATA_DMA_PIO; #endif /* HAVE_ATA_DMA */ static unsigned int get_T(void) { /* T = ATA clock period in nanoseconds */ return 1000 * 1000 * 1000 / ccm_get_ata_clk(); } static void ata_wait_for_idle(void) { while (!(ATA_INTERRUPT_PENDING & ATA_CONTROLLER_IDLE)); } /* Route the INTRQ to either the MCU or SDMA depending upon whether there is * a DMA transfer in progress. */ static inline void ata_set_intrq(bool to_dma) { ATA_INTERRUPT_ENABLE = (ATA_INTERRUPT_ENABLE & ~(ATA_INTRQ1 | ATA_INTRQ2)) | (to_dma ? ATA_INTRQ1 : ATA_INTRQ2); } /* Setup the timing for PIO mode */ void ata_set_pio_timings(int mode) { const struct ata_pio_timings * const timings = &pio_timings[mode]; unsigned int T = get_T(); ata_wait_for_idle(); ATA_TIME_1 = (timings->time_1 + T) / T; ATA_TIME_2W = (timings->time_2w + T) / T; ATA_TIME_2R = (timings->time_2r + T) / T; ATA_TIME_AX = (timings->time_ax + T) / T + 2; /* 1.5 + tAX */ ATA_TIME_PIO_RDX = 1; ATA_TIME_4 = (timings->time_4 + T) / T; ATA_TIME_9 = (timings->time_9 + T) / T; } void ata_reset(void) { /* Be sure we're not busy */ ata_wait_for_idle(); ATA_INTF_CONTROL &= ~(ATA_ATA_RST | ATA_FIFO_RST); sleep(HZ/100); ATA_INTF_CONTROL = ATA_ATA_RST | ATA_FIFO_RST; sleep(HZ/100); ata_wait_for_idle(); } void ata_enable(bool on) { /* Unconditionally clock module before writing regs */ ccm_module_clock_gating(CG_ATA, CGM_ON_RUN_WAIT); ata_wait_for_idle(); if (on) { ATA_INTF_CONTROL = ATA_ATA_RST | ATA_FIFO_RST; sleep(HZ/100); } else { ATA_INTF_CONTROL &= ~(ATA_ATA_RST | ATA_FIFO_RST); sleep(HZ/100); /* Disable off - unclock ATA module */ ccm_module_clock_gating(CG_ATA, CGM_OFF); } } bool ata_is_coldstart(void) { return true; } #ifdef HAVE_ATA_DMA static void ata_set_mdma_timings(unsigned int mode) { const struct ata_mdma_timings * const timings = &mdma_timings[mode]; unsigned int T = get_T(); ATA_TIME_M = (timings->time_m + T) / T; ATA_TIME_JN = (timings->time_jn + T) / T; ATA_TIME_D = (timings->time_d + T) / T; ATA_TIME_K = (timings->time_k + T) / T; } static void ata_set_udma_timings(unsigned int mode) { const struct ata_udma_timings * const timings = &udma_timings[mode]; unsigned int T = get_T(); ATA_TIME_ACK = (timings->time_ack + T) / T; ATA_TIME_ENV = (timings->time_env + T) / T; ATA_TIME_RPX = (timings->time_rpx + T) / T; ATA_TIME_ZAH = (timings->time_zah + T) / T; ATA_TIME_MLIX = (timings->time_mlix + T) / T; ATA_TIME_DVH = (timings->time_dvh + T) / T + 1; ATA_TIME_DZFS = (timings->time_dzfs + T) / T; ATA_TIME_DVS = (timings->time_dvs + T) / T; ATA_TIME_CVH = (timings->time_cvh + T) / T; ATA_TIME_SS = (timings->time_ss + T) / T; ATA_TIME_CYC = (timings->time_cyc + T) / T; } void ata_dma_set_mode(unsigned char mode) { unsigned int modeidx = mode & 0x07; unsigned int dmamode = mode & 0xf8; ata_wait_for_idle(); if (ata_dma_selected == ATA_DMA_DISABLED) { /* Configuration error - no DMA */ } else if (dmamode == 0x40 && modeidx <= ATA_MAX_UDMA) { /* Using Ultra DMA */ ata_set_udma_timings(dmamode); ata_dma_selected = ATA_DMA_UDMA; } else if (dmamode == 0x20 && modeidx <= ATA_MAX_MWDMA) { /* Using Multiword DMA */ ata_set_mdma_timings(dmamode); ata_dma_selected = ATA_DMA_MWDMA; } else { /* Don't understand this - force PIO. */ ata_dma_selected = ATA_DMA_PIO; } } /* Called by SDMA when transfer is complete */ static void ata_dma_callback(void) { /* Clear FIFO if not empty - shouldn't happen */ while (ATA_FIFO_FILL != 0) ATA_FIFO_DATA_32; /* Clear FIFO interrupts (the only ones that can be) */ ATA_INTERRUPT_CLEAR = ATA_INTERRUPT_PENDING; ata_set_intrq(false); /* Return INTRQ to MCU */ wakeup_signal(&ata_dma_wakeup); /* Signal waiting thread */ } bool ata_dma_setup(void *addr, unsigned long bytes, bool write) { struct buffer_descriptor *bd_p; unsigned char *buf; if (UNLIKELY(bytes > ATA_BASE_BD_COUNT*ATA_MAX_BD_SIZE || (ata_dma_selected & ATA_DMA_PIO))) { /* Too much? Implies BD count should be reevaluated since this * shouldn't be reached based upon size. Otherwise we simply didn't * understand the DMA mode setup. Force PIO in both cases. */ ATA_INTF_CONTROL = ATA_FIFO_RST | ATA_ATA_RST; return false; } bd_p = &ata_bda[0]; buf = (unsigned char *)addr_virt_to_phys((unsigned long)addr); sb_dst[0] = NULL; /* Assume not needed */ if (write) { /* No cache alignment concerns */ current_channel = ATA_DMA_CH_NUM_WR; if (LIKELY(buf != addr)) { /* addr is virtual */ clean_dcache_range(addr, bytes); } /* Setup ATA controller for DMA transmit */ ATA_INTF_CONTROL = ATA_FIFO_RST | ATA_ATA_RST | ATA_FIFO_TX_EN | ATA_DMA_PENDING | ata_dma_selected | ATA_DMA_WRITE; ATA_FIFO_ALARM = SDMA_ATA_WML / 2; } else { current_channel = ATA_DMA_CH_NUM_RD; /* Setup ATA controller for DMA receive */ ATA_INTF_CONTROL = ATA_FIFO_RST | ATA_ATA_RST | ATA_FIFO_RCV_EN | ATA_DMA_PENDING | ata_dma_selected; ATA_FIFO_ALARM = SDMA_ATA_WML / 2; if (LIKELY(buf != addr)) { /* addr is virtual */ dump_dcache_range(addr, bytes); if ((unsigned long)addr & 31) { /* Not cache aligned, must use scatter buffers for first and * last 32 bytes. */ unsigned char *bufstart = buf; sb_dst[0] = addr; bd_p->buf_addr = scatter_buffer; bd_p->mode.count = 32; bd_p->mode.status = BD_DONE | BD_CONT; buf += 32; bytes -= 32; bd_p++; while (bytes > ATA_MAX_BD_SIZE) { bd_p->buf_addr = buf; bd_p->mode.count = ATA_MAX_BD_SIZE; bd_p->mode.status = BD_DONE | BD_CONT; buf += ATA_MAX_BD_SIZE; bytes -= ATA_MAX_BD_SIZE; bd_p++; } if (bytes > 32) { unsigned long size = bytes - 32; bd_p->buf_addr = buf; bd_p->mode.count = size; bd_p->mode.status = BD_DONE | BD_CONT; buf += size; bd_p++; } /* There will be exactly 32 bytes left */ /* Final buffer - wrap to base bd, interrupt */ sb_dst[1] = addr + (buf - bufstart); bd_p->buf_addr = &scatter_buffer[32/4]; bd_p->mode.count = 32; bd_p->mode.status = BD_DONE | BD_WRAP | BD_INTR; return true; } } } /* Setup buffer descriptors for both cache-aligned reads and all write * operations. */ while (bytes > ATA_MAX_BD_SIZE) { bd_p->buf_addr = buf; bd_p->mode.count = ATA_MAX_BD_SIZE; bd_p->mode.status = BD_DONE | BD_CONT; buf += ATA_MAX_BD_SIZE; bytes -= ATA_MAX_BD_SIZE; bd_p++; } /* Final buffer - wrap to base bd, interrupt */ bd_p->buf_addr = buf; bd_p->mode.count = bytes; bd_p->mode.status = BD_DONE | BD_WRAP | BD_INTR; return true; } bool ata_dma_finish(void) { unsigned int channel = current_channel; long timeout = current_tick + HZ*10; current_channel = 0; ata_set_intrq(true); /* Give INTRQ to DMA */ sdma_channel_run(channel); /* Kick the channel to wait for events */ while (1) { int oldirq; if (LIKELY(wakeup_wait(&ata_dma_wakeup, HZ/2) == OBJ_WAIT_SUCCEEDED)) break; ata_keep_active(); if (TIME_BEFORE(current_tick, timeout)) continue; /* Epic fail - timed out - maybe. */ oldirq = disable_irq_save(); ata_set_intrq(false); /* Strip INTRQ from DMA */ sdma_channel_stop(channel); /* Stop DMA */ restore_irq(oldirq); if (wakeup_wait(&ata_dma_wakeup, TIMEOUT_NOBLOCK) == OBJ_WAIT_SUCCEEDED) break; /* DMA really did finish after timeout */ sdma_channel_reset(channel); /* Reset everything + clear error */ return false; } if (sdma_channel_is_error(channel)) { /* Channel error in one or more descriptors */ sdma_channel_reset(channel); /* Reset everything + clear error */ return false; } if (sb_dst[0] != NULL) { /* NOTE: This requires that unaligned access support be enabled! */ register void *sbs = scatter_buffer; register void *sbd0 = sb_dst[0]; register void *sbd1 = sb_dst[1]; asm volatile( "add r0, %1, #32 \n" /* Prefetch at DMA-direct boundaries */ "mcrr p15, 2, r0, r0, c12 \n" "mcrr p15, 2, %2, %2, c12 \n" "ldmia %0!, { r0-r3 } \n" /* Copy the 32-bytes to destination */ "str r0, [%1], #4 \n" /* stmia doesn't work unaligned */ "str r1, [%1], #4 \n" "str r2, [%1], #4 \n" "str r3, [%1], #4 \n" "ldmia %0!, { r0-r3 } \n" "str r0, [%1], #4 \n" "str r1, [%1], #4 \n" "str r2, [%1], #4 \n" "str r3, [%1] \n" "ldmia %0!, { r0-r3 } \n" /* Copy the 32-bytes to destination */ "str r0, [%2], #4 \n" /* stmia doesn't work unaligned */ "str r1, [%2], #4 \n" "str r2, [%2], #4 \n" "str r3, [%2], #4 \n" "ldmia %0!, { r0-r3 } \n" "str r0, [%2], #4 \n" "str r1, [%2], #4 \n" "str r2, [%2], #4 \n" "str r3, [%2] \n" : "+r"(sbs), "+r"(sbd0), "+r"(sbd1) : : "r0", "r1", "r2", "r3"); } return true; } #endif /* HAVE_ATA_DMA */ void ata_device_init(void) { /* Make sure we're not in reset mode */ ata_enable(true); if (!initialized) { ATA_INTERRUPT_ENABLE = 0; ATA_INTERRUPT_CLEAR = ATA_INTERRUPT_PENDING; } ata_set_intrq(false); if (initialized) return; /* All modes use same tOFF/tON */ ATA_TIME_OFF = 3; ATA_TIME_ON = 3; /* Setup mode 0 for all by default * Mode may be switched later once identify info is ready in which * case the main driver calls back */ ata_set_pio_timings(0); #ifdef HAVE_ATA_DMA ata_set_mdma_timings(0); ata_set_udma_timings(0); ata_dma_selected = ATA_DMA_PIO; /* Called for first time at startup */ wakeup_init(&ata_dma_wakeup); /* Read/write channels share buffer descriptors */ ata_cd_rd.bd_count = ATA_BD_COUNT; ata_cd_rd.callback = ata_dma_callback; ata_cd_rd.shp_addr = SDMA_PER_ADDR_ATA_RX; ata_cd_rd.wml = SDMA_ATA_WML; ata_cd_rd.per_type = SDMA_PER_ATA; ata_cd_rd.tran_type = SDMA_TRAN_PER_2_EMI; ata_cd_rd.event_id1 = SDMA_REQ_ATA_TXFER_END; ata_cd_rd.event_id2 = SDMA_REQ_ATA_RX; ata_cd_wr.bd_count = ATA_BD_COUNT; ata_cd_wr.callback = ata_dma_callback; ata_cd_wr.shp_addr = SDMA_PER_ADDR_ATA_TX; ata_cd_wr.wml = SDMA_ATA_WML; ata_cd_wr.per_type = SDMA_PER_ATA; ata_cd_wr.tran_type = SDMA_TRAN_EMI_2_PER; ata_cd_wr.event_id1 = SDMA_REQ_ATA_TXFER_END; ata_cd_wr.event_id2 = SDMA_REQ_ATA_TX; if (!sdma_channel_init(ATA_DMA_CH_NUM_RD, &ata_cd_rd, ata_bda) || !sdma_channel_init(ATA_DMA_CH_NUM_WR, &ata_cd_wr, ata_bda)) { /* Channel init error - disable DMA forever */ ata_dma_selected = ATA_DMA_DISABLED; } #endif /* HAVE_ATA_DMA */ initialized = true; }