/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Rob Purchase * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include "system.h" #include "i2c.h" #include "i2c-target.h" /* arbitrary delay loop */ #define DELAY do { int _x; for(_x=0;_x<40;_x++);} while (0) static struct mutex i2c_mtx; void i2c_init(void) { /* nothing to do */ } void i2c_start(void) { SDA_OUTPUT; SCL_HI; SDA_HI; DELAY; SDA_LO; DELAY; SCL_LO; DELAY; } void i2c_stop(void) { SDA_OUTPUT; SDA_LO; DELAY; SCL_HI; DELAY; SDA_HI; DELAY; } void i2c_outb(unsigned char byte) { int bit; SDA_OUTPUT; for (bit = 0; bit < 8; bit++) { if ((byte<>=1 ) { SCL_HI; DELAY; if ( SDA ) byte |= i; SCL_LO; DELAY; } i2c_ack(ack); return byte; } void i2c_ack(int bit) { SDA_OUTPUT; if (bit) SDA_HI; else SDA_LO; SCL_HI; DELAY; SCL_LO; DELAY; } int i2c_getack(void) { bool ack_bit; SDA_INPUT; SCL_HI; DELAY; ack_bit = SDA; DELAY; SCL_LO; DELAY; return ack_bit; } /* device = 8 bit slave address */ int i2c_write(int device, const unsigned char* buf, int count ) { int i = 0; mutex_lock(&i2c_mtx); i2c_start(); i2c_outb(device & 0xfe); while (!i2c_getack() && i < count) { i2c_outb(buf[i++]); } i2c_stop(); mutex_unlock(&i2c_mtx); return 0; } /* device = 8 bit slave address */ int i2c_readmem(int device, int address, unsigned char* buf, int count ) { int i = 0; mutex_lock(&i2c_mtx); i2c_start(); i2c_outb(device & 0xfe); if (i2c_getack()) goto exit; i2c_outb(address); if (i2c_getack()) goto exit; i2c_start(); i2c_outb(device | 1); if (i2c_getack()) goto exit; while (i < count) { buf[i] = i2c_inb(i == (count-1)); i++; } exit: i2c_stop(); mutex_unlock(&i2c_mtx); return 0; }