/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2006 by James Espinoza * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* Most(if not all) of these defines are copied from Nand-Boot v4 provided w/ the Imx31 Linux Bsp*/ #define REG8_PTR_T volatile unsigned char * #define REG16_PTR_T volatile unsigned short * #define REG32_PTR_T volatile unsigned long * /* Place in the section with the framebuffer */ #define TTB_BASE_ADDR (0x80100000 + 0x00100000 - TTB_SIZE) /*Frame Buffer and TTB defines from gigabeat f/x build*/ #define FRAME ((short *)0x80100000) /* Framebuffer */ #define LCD_BUFFER_SIZE ((320*240*2)) #define TTB_SIZE (0x4000) #define TTB_BASE ((unsigned int *)TTB_BASE_ADDR) /* * AIPS 1 */ #define IRAM_BASE_ADDR 0x1fffc000 #define L2CC_BASE_ADDR 0x30000000 #define AIPS1_BASE_ADDR 0x43F00000 #define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR #define MAX_BASE_ADDR 0x43F04000 #define EVTMON_BASE_ADDR 0x43F08000 #define CLKCTL_BASE_ADDR 0x43F0C000 #define ETB_SLOT4_BASE_ADDR 0x43F10000 #define ETB_SLOT5_BASE_ADDR 0x43F14000 #define ECT_CTIO_BASE_ADDR 0x43F18000 #define I2C_BASE_ADDR 0x43F80000 #define I2C3_BASE_ADDR 0x43F84000 #define OTG_BASE_ADDR 0x43F88000 #define ATA_BASE_ADDR 0x43F8C000 #define UART1_BASE_ADDR 0x43F90000 #define UART2_BASE_ADDR 0x43F94000 #define I2C2_BASE_ADDR 0x43F98000 #define OWIRE_BASE_ADDR 0x43F9C000 #define SSI1_BASE_ADDR 0x43FA0000 #define CSPI1_BASE_ADDR 0x43FA4000 #define KPP_BASE_ADDR 0x43FA8000 #define IOMUXC_BASE_ADDR 0x43FAC000 #define UART4_BASE_ADDR 0x43FB0000 #define UART5_BASE_ADDR 0x43FB4000 #define ECT_IP1_BASE_ADDR 0x43FB8000 #define ECT_IP2_BASE_ADDR 0x43FBC000 /* * SPBA */ #define SPBA_BASE_ADDR 0x50000000 #define MMC_SDHC1_BASE_ADDR 0x50004000 #define MMC_SDHC2_BASE_ADDR 0x50008000 #define UART3_BASE_ADDR 0x5000C000 #define CSPI2_BASE_ADDR 0x50010000 #define SSI2_BASE_ADDR 0x50014000 #define SIM_BASE_ADDR 0x50018000 #define IIM_BASE_ADDR 0x5001C000 #define ATA_DMA_BASE_ADDR 0x50020000 #define SPBA_CTRL_BASE_ADDR 0x5003C000 /* * AIPS 2 */ #define AIPS2_BASE_ADDR 0x53F00000 #define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR #define CCM_BASE_ADDR 0x53F80000 #define FIRI_BASE_ADDR 0x53F8C000 #define GPT1_BASE_ADDR 0x53F90000 #define EPIT1_BASE_ADDR 0x53F94000 #define EPIT2_BASE_ADDR 0x53F98000 #define GPIO3_BASE_ADDR 0x53FA4000 #define SCC_BASE 0x53FAC000 #define SCM_BASE 0x53FAE000 #define SMN_BASE 0x53FAF000 #define RNGA_BASE_ADDR 0x53FB0000 #define IPU_CTRL_BASE_ADDR 0x53FC0000 #define AUDMUX_BASE 0x53FC4000 #define MPEG4_ENC_BASE 0x53FC8000 #define GPIO1_BASE_ADDR 0x53FCC000 #define GPIO2_BASE_ADDR 0x53FD0000 #define SDMA_BASE_ADDR 0x53FD4000 #define RTC_BASE_ADDR 0x53FD8000 #define WDOG_BASE_ADDR 0x53FDC000 #define PWM_BASE_ADDR 0x53FE0000 #define RTIC_BASE_ADDR 0x53FEC000 #define WDOG1_BASE_ADDR WDOG_BASE_ADDR #define CRM_MCU_BASE_ADDR CCM_BASE_ADDR /* IOMUXC */ #define IOMUXC_(o) (*(REG32_PTR_T)(IOMUXC_BASE_ADDR+(o))) /* GPR */ #define IOMUXC_GPR IOMUXC_(0x008) /* SW_MUX_CTL */ #define SW_MUX_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY_TTM_PAD IOMUXC_(0x00C) #define SW_MUX_CTL_ATA_RESET_B_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x010) #define SW_MUX_CTL_ATA_CS1_ATA_DIOR_ATA_DIOW_ATA_DMACK IOMUXC_(0x014) #define SW_MUX_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3_ATA_CS0 IOMUXC_(0x018) #define SW_MUX_CTL_D3_SPL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x01C) #define SW_MUX_CTL_VSYNC3_CONTRAST_D3_REV_D3_CLS IOMUXC_(0x020) #define SW_MUX_CTL_SER_RS_PAR_RS_WRITE_READ IOMUXC_(0x024) #define SW_MUX_CTL_SD_D_IO_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x028) #define SW_MUX_CTL_HSYNC_FPSHIFT_DRDY0_SD_D_I IOMUXC_(0x02C) #define SW_MUX_CTL_LD15_LD16_LD17_VSYNC0 IOMUXC_(0x030) #define SW_MUX_CTL_LD11_LD12_LD13_LD14 IOMUXC_(0x034) #define SW_MUX_CTL_LD7_LD8_LD9_LD10 IOMUXC_(0x038) #define SW_MUX_CTL_LD3_LD4_LD5_LD6 IOMUXC_(0x03C) #define SW_MUX_CTL_USBH2_DATA1_LD0_LD1_LD2 IOMUXC_(0x040) #define SW_MUX_CTL_USBH2_DIR_USBH2_STP_USBH2_NXT_USBH2_DATA0 IOMUXC_(0x044) #define SW_MUX_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7_USBH2_CLK IOMUXC_(0x048) #define SW_MUX_CTL_USBOTG_DATA1_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x04C) #define SW_MUX_CTL_USBOTG_DIR_USBOTG_STP_USBOTG_NXT_USBOTG_DATA0 IOMUXC_(0x050) #define SW_MUX_CTL_USB_PWR_USB_OC_USB_BYP_USBOTG_CLK IOMUXC_(0x054) #define SW_MUX_CTL_TDO_TRSTB_DE_B_SJC_MOD IOMUXC_(0x058) #define SW_MUX_CTL_RTCK_TCK_TMS_TDI IOMUXC_(0x05C) #define SW_MUX_CTL_KEY_COL4_KEY_COL5_KEY_COL6_KEY_COL7 IOMUXC_(0x060) #define SW_MUX_CTL_KEY_COL0_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x064) #define SW_MUX_CTL_KEY_ROW4_KEY_ROW5_KEY_ROW6_KEY_ROW7 IOMUXC_(0x068) #define SW_MUX_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2_KEY_ROW3 IOMUXC_(0x06C) #define SW_MUX_CTL_TXD2_RTS2_CTS2_BATT_LINE IOMUXC_(0x070) #define SW_MUX_CTL_RI_DTE1_DCD_DTE1_DTR_DCE2_RXD2 IOMUXC_(0x074) #define SW_MUX_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1_DSR_DTE1 IOMUXC_(0x078) #define SW_MUX_CTL_RTS1_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x07C) #define SW_MUX_CTL_CSPI2_SCLK_CSPI2_SPI_RDY_RXD1_TXD1 IOMUXC_(0x080) #define SW_MUX_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1_CSPI2_SS2 IOMUXC_(0x084) #define SW_MUX_CTL_CSPI1_SS2_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x088) #define SW_MUX_CTL_CSPI1_MOSI_CSPI1_MISO_CSPI1_SS0_CSPI1_SS1 IOMUXC_(0x08C) #define SW_MUX_CTL_STXD6_SRXD6_SCK6_SFS6 IOMUXC_(0x090) #define SW_MUX_CTL_STXD5_SRXD5_SCK5_SFS5 IOMUXC_(0x094) #define SW_MUX_CTL_STXD4_SRXD4_SCK4_SFS4 IOMUXC_(0x098) #define SW_MUX_CTL_STXD3_SRXD3_SCK3_SFS3 IOMUXC_(0x09C) #define SW_MUX_CTL_CSI_HSYNC_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x0A0) #define SW_MUX_CTL_CSI_D14_CSI_D15_CSI_MCLK_CSI_VSYNC IOMUXC_(0x0A4) #define SW_MUX_CTL_CSI_D10_CSI_D11_CSI_D12_CSI_D13 IOMUXC_(0x0A8) #define SW_MUX_CTL_CSI_D6_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x0AC) #define SW_MUX_CTL_M_REQUEST_M_GRANT_CSI_D4_CSI_D5 IOMUXC_(0x0B0) #define SW_MUX_CTL_PC_RST_IOIS16_PC_RW_B_PC_POE IOMUXC_(0x0B4) #define SW_MUX_CTL_PC_VS1_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x0B8) #define SW_MUX_CTL_PC_CD2_B_PC_WAIT_B_PC_READY_PC_PWRON IOMUXC_(0x0BC) #define SW_MUX_CTL_D2_D1_D0_PC_CD1_B IOMUXC_(0x0C0) #define SW_MUX_CTL_D6_D5_D4_D3 IOMUXC_(0x0C4) #define SW_MUX_CTL_D10_D9_D8_D7 IOMUXC_(0x0C8) #define SW_MUX_CTL_D14_D13_D12_D11 IOMUXC_(0x0CC) #define SW_MUX_CTL_NFWP_B_NFCE_B_NFRB_D15 IOMUXC_(0x0D0) #define SW_MUX_CTL_NFWE_B_NFRE_B_NFALE_NFCLE IOMUXC_(0x0D4) #define SW_MUX_CTL_SDQS0_SDQS1_SDQS2_SDQS3 IOMUXC_(0x0D8) #define SW_MUX_CTL_SDCKE0_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x0DC) #define SW_MUX_CTL_RW_RAS_CAS_SDWE IOMUXC_(0x0E0) #define SW_MUX_CTL_CS5_ECB_LBA_BCLK IOMUXC_(0x0E4) #define SW_MUX_CTL_CS1_CS2_CS3_CS4 IOMUXC_(0x0E8) #define SW_MUX_CTL_EB0_EB1_OE_CS0 IOMUXC_(0x0EC) #define SW_MUX_CTL_DQM0_DQM1_DQM2_DQM3 IOMUXC_(0x0F0) #define SW_MUX_CTL_SD28_SD29_SD30_SD31 IOMUXC_(0x0F4) #define SW_MUX_CTL_SD24_SD25_SD26_SD27 IOMUXC_(0x0F8) #define SW_MUX_CTL_SD20_SD21_SD22_SD23 IOMUXC_(0x0FC) #define SW_MUX_CTL_SD16_SD17_SD18_SD19 IOMUXC_(0x100) #define SW_MUX_CTL_SD12_SD13_SD14_SD15 IOMUXC_(0x104) #define SW_MUX_CTL_SD8_SD9_SD10_SD11 IOMUXC_(0x108) #define SW_MUX_CTL_SD4_SD5_SD6_SD7 IOMUXC_(0x10C) #define SW_MUX_CTL_SD0_SD1_SD2_SD3 IOMUXC_(0x110) #define SW_MUX_CTL_A24_A25_SDBA1_SDBA0 IOMUXC_(0x114) #define SW_MUX_CTL_A20_A21_A22_A23 IOMUXC_(0x118) #define SW_MUX_CTL_A16_A17_A18_A19 IOMUXC_(0x11C) #define SW_MUX_CTL_A12_A13_A14_A15 IOMUXC_(0x120) #define SW_MUX_CTL_A9_A10_MA10_A11 IOMUXC_(0x124) #define SW_MUX_CTL_A5_A6_A7_A8 IOMUXC_(0x128) #define SW_MUX_CTL_A1_A2_A3_A4 IOMUXC_(0x12C) #define SW_MUX_CTL_DVFS1_VPG0_VPG1_A0 IOMUXC_(0x130) #define SW_MUX_CTL_CKIL_POWER_FAIL_VSTBY_DVFS0 IOMUXC_(0x134) #define SW_MUX_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3_BOOT_MODE4 IOMUXC_(0x138) #define SW_MUX_CTL_RESET_IN_B_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x13C) #define SW_MUX_CTL_STX0_SRX0_SIMPD0_CKIH IOMUXC_(0x140) #define SW_MUX_CTL_GPIO3_1_SCLK0_SRST0_SVEN0 IOMUXC_(0x144) #define SW_MUX_CTL_GPIO1_4_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x148) #define SW_MUX_CTL_GPIO1_0_GPIO1_1_GPIO1_2_GPIO1_3 IOMUXC_(0x14C) #define SW_MUX_CTL_CAPTURE_COMPARE_WATCHDOG_RST_PWMO IOMUXC_(0x150) #define SW_MUX_OUT_EN_GPIO_DR 0x0 #define SW_MUX_OUT_FUNCTIONAL 0x1 #define SW_MUX_OUT_ALTERNATE_1 0x2 #define SW_MUX_OUT_ALTERNATE_2 0x3 #define SW_MUX_OUT_ALTERNATE_3 0x4 #define SW_MUX_OUT_ALTERNATE_4 0x5 #define SW_MUX_OUT_ALTERNATE_5 0x6 #define SW_MUX_OUT_ALTERNATE_6 0x7 #define SW_MUX_IN_NO_INPUTS 0x0 #define SW_MUX_IN_GPIO_PSR_ISR 0x1 #define SW_MUX_IN_FUNCTIONAL 0x2 #define SW_MUX_IN_ALTERNATE_1 0x3 #define SW_MUX_IN_ALTERNATE_2 0x4 /* Shift above flags into one of the four fields in each register */ #define SW_MUX_CTL_FLD_0(x) ((x) << 0) #define SW_MUX_CTL_FLD_1(x) ((x) << 8) #define SW_MUX_CTL_FLD_2(x) ((x) << 16) #define SW_MUX_CTL_FLD_3(x) ((x) << 24) /* SW_PAD_CTL */ #define SW_PAD_CTL_TTM_PAD__X__X IOMUXC_(0x154) #define SW_PAD_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY IOMUXC_(0x158) #define SW_PAD_CTL_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x15C) #define SW_PAD_CTL_ATA_DIOW_ATA_DMACK_ATA_RESET_B IOMUXC_(0x160) #define SW_PAD_CTL_ATA_CS0_ATA_CS1_ATA_DIOR IOMUXC_(0x164) #define SW_PAD_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3 IOMUXC_(0x168) #define SW_PAD_CTL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x16C) #define SW_PAD_CTL_D3_REV_D3_CLS_D3_SPL IOMUXC_(0x170) #define SW_PAD_CTL_READ_VSYNC3_CONTRAST IOMUXC_(0x174) #define SW_PAD_CTL_SER_RS_PAR_RS_WRITE IOMUXC_(0x178) #define SW_PAD_CTL_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x17C) #define SW_PAD_CTL_DRDY0_SD_D_I_SD_D_IO IOMUXC_(0x180) #define SW_PAD_CTL_VSYNC0_HSYNC_FPSHIFT IOMUXC_(0x184) #define SW_PAD_CTL_LD15_LD16_LD17 IOMUXC_(0x188) #define SW_PAD_CTL_LD12_LD13_LD14 IOMUXC_(0x18C) #define SW_PAD_CTL_LD9_LD10_LD11 IOMUXC_(0x190) #define SW_PAD_CTL_LD6_LD7_LD8 IOMUXC_(0x194) #define SW_PAD_CTL_LD3_LD4_LD5 IOMUXC_(0x198) #define SW_PAD_CTL_LD0_LD1_LD2 IOMUXC_(0x19C) #define SW_PAD_CTL_USBH2_NXT_USBH2_DATA0_USBH2_DATA1 IOMUXC_(0x1A0) #define SW_PAD_CTL_USBH2_CLK_USBH2_DIR_USBH2_STP IOMUXC_(0x1A4) #define SW_PAD_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7 IOMUXC_(0x1A8) #define SW_PAD_CTL_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x1AC) #define SW_PAD_CTL_USBOTG_NXT_USBOTG_DATA0_USBOTG_DATA1 IOMUXC_(0x1B0) #define SW_PAD_CTL_USBOTG_CLK_USBOTG_DIR_USBOTG_STP IOMUXC_(0x1B4) #define SW_PAD_CTL_USB_PWR_USB_OC_USB_BYP IOMUXC_(0x1B8) #define SW_PAD_CTL_TRSTB_DE_B_SJC_MOD IOMUXC_(0x1BC) #define SW_PAD_CTL_TMS_TDI_TDO IOMUXC_(0x1C0) #define SW_PAD_CTL_KEY_COL7_RTCK_TCK IOMUXC_(0x1C4) #define SW_PAD_CTL_KEY_COL4_KEY_COL5_KEY_COL6 IOMUXC_(0x1C8) #define SW_PAD_CTL_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x1CC) #define SW_PAD_CTL_KEY_ROW6_KEY_ROW7_KEY_COL0 IOMUXC_(0x1D0) #define SW_PAD_CTL_KEY_ROW3_KEY_ROW4_KEY_ROW5 IOMUXC_(0x1D4) #define SW_PAD_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2 IOMUXC_(0x1D8) #define SW_PAD_CTL_RTS2_CTS2_BATT_LINE IOMUXC_(0x1DC) #define SW_PAD_CTL_DTR_DCE2_RXD2_TXD2 IOMUXC_(0x1E0) #define SW_PAD_CTL_DSR_DTE1_RI_DTE1_DCD_DTE1 IOMUXC_(0x1E4) #define SW_PAD_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1 IOMUXC_(0x1E8) #define SW_PAD_CTL_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x1EC) #define SW_PAD_CTL_RXD1_TXD1_RTS1 IOMUXC_(0x1F0) #define SW_PAD_CTL_CSPI2_SS2_CSPI2_SCLK_CSPI2_SPI_RDY IOMUXC_(0x1F4) #define SW_PAD_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1 IOMUXC_(0x1F8) #define SW_PAD_CTL_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x1FC) #define SW_PAD_CTL_CSPI1_SS0_CSPI1_SS1_CSPI1_SS IOMUXC_(0x200) #define SW_PAD_CTL_SFS6_CSPI1_MOSI_CSPI1_MISO IOMUXC_(0x204) #define SW_PAD_CTL_STXD6_SRXD6_SCK6 IOMUXC_(0x208) #define SW_PAD_CTL_SRXD5_SCK5_SFS5 IOMUXC_(0x20C) #define SW_PAD_CTL_SCK4_SFS4_STXD5 IOMUXC_(0x210) #define SW_PAD_CTL_SFS3_STXD4_SRXD4 IOMUXC_(0x214) #define SW_PAD_CTL_STXD3_SRXD3_SCK3 IOMUXC_(0x218) #define SW_PAD_CTL_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x21C) #define SW_PAD_CTL_CSI_MCLK_CSI_VSYNC_CSI_HSYNC IOMUXC_(0x220) #define SW_PAD_CTL_CSI_D13_CSI_D14_CSI_D15 IOMUXC_(0x224) #define SW_PAD_CTL_CSI_D10_CSI_D11_CSI_D12 IOMUXC_(0x228) #define SW_PAD_CTL_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x22C) #define SW_PAD_CTL_CSI_D4_CSI_D5_CSI_D6 IOMUXC_(0x230) #define SW_PAD_CTL_PC_POE_M_REQUEST_M_GRANT IOMUXC_(0x234) #define SW_PAD_CTL_PC_RST_IOIS16_PC_RW_B IOMUXC_(0x238) #define SW_PAD_CTL_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x23C) #define SW_PAD_CTL_PC_READY_PC_PWRON_PC_VS1 IOMUXC_(0x240) #define SW_PAD_CTL_PC_CD1_B_PC_CD2_B_PC_WAIT_B IOMUXC_(0x244) #define SW_PAD_CTL_D2_D1_D0 IOMUXC_(0x248) #define SW_PAD_CTL_D5_D4_D3 IOMUXC_(0x24C) #define SW_PAD_CTL_D8_D7_D6 IOMUXC_(0x250) #define SW_PAD_CTL_D11_D10_D9 IOMUXC_(0x254) #define SW_PAD_CTL_D14_D13_D12 IOMUXC_(0x258) #define SW_PAD_CTL_NFCE_B_NFRB_D15 IOMUXC_(0x25C) #define SW_PAD_CTL_NFALE_NFCLE_NFWP_B IOMUXC_(0x260) #define SW_PAD_CTL_SDQS3_NFWE_B_NFRE_B IOMUXC_(0x264) #define SW_PAD_CTL_SDQS0_SDQS1_SDQS2 IOMUXC_(0x268) #define SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x26C) #define SW_PAD_CTL_CAS_SDWE_SDCKE0 IOMUXC_(0x270) #define SW_PAD_CTL_BCLK_RW_RAS IOMUXC_(0x274) #define SW_PAD_CTL_CS5_ECB_LBA IOMUXC_(0x278) #define SW_PAD_CTL_CS2_CS3_CS4 IOMUXC_(0x27C) #define SW_PAD_CTL_OE_CS0_CS1 IOMUXC_(0x280) #define SW_PAD_CTL_DQM3_EB0_EB1 IOMUXC_(0x284) #define SW_PAD_CTL_DQM0_DQM1_DQM2 IOMUXC_(0x288) #define SW_PAD_CTL_SD29_SD30_SD31 IOMUXC_(0x28C) #define SW_PAD_CTL_SD26_SD27_SD28 IOMUXC_(0x290) #define SW_PAD_CTL_SD23_SD24_SD25 IOMUXC_(0x294) #define SW_PAD_CTL_SD20_SD21_SD22 IOMUXC_(0x298) #define SW_PAD_CTL_SD17_SD18_SD19 IOMUXC_(0x29C) #define SW_PAD_CTL_SD14_SD15_SD16 IOMUXC_(0x2A0) #define SW_PAD_CTL_SD11_SD12_SD13 IOMUXC_(0x2A4) #define SW_PAD_CTL_SD8_SD9_SD10 IOMUXC_(0x2A8) #define SW_PAD_CTL_SD5_SD6_SD7 IOMUXC_(0x2AC) #define SW_PAD_CTL_SD2_SD3_SD4 IOMUXC_(0x2B0) #define SW_PAD_CTL_SDBA0_SD0_SD1 IOMUXC_(0x2B4) #define SW_PAD_CTL_A24_A25_SDBA1 IOMUXC_(0x2B8) #define SW_PAD_CTL_A21_A22_A23 IOMUXC_(0x2BC) #define SW_PAD_CTL_A18_A19_A20 IOMUXC_(0x2C0) #define SW_PAD_CTL_A15_A16_A17 IOMUXC_(0x2C4) #define SW_PAD_CTL_A12_A13_A14 IOMUXC_(0x2C8) #define SW_PAD_CTL_A10_MA10_A11 IOMUXC_(0x2CC) #define SW_PAD_CTL_A7_A8_A9 IOMUXC_(0x2D0) #define SW_PAD_CTL_A4_A5_A6 IOMUXC_(0x2D4) #define SW_PAD_CTL_A1_A2_A3 IOMUXC_(0x2D8) #define SW_PAD_CTL_VPG0_VPG1_A0 IOMUXC_(0x2DC) #define SW_PAD_CTL_VSTBY_DVFS0_DVFS1 IOMUXC_(0x2E0) #define SW_PAD_CTL_BOOT_MODE4_CKIL_POWER_FAIL IOMUXC_(0x2E4) #define SW_PAD_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3 IOMUXC_(0x2E8) #define SW_PAD_CTL_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x2EC) #define SW_PAD_CTL_SIMPD0_CKIH_RESET_IN_B IOMUXC_(0x2F0) #define SW_PAD_CTL_SVEN0_STX0_SRX0 IOMUXC_(0x2F4) #define SW_PAD_CTL_GPIO3_1_SCLK0_SRST0 IOMUXC_(0x2F8) #define SW_PAD_CTL_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x2FC) #define SW_PAD_CTL_GPIO1_2_GPIO1_3_GPIO1_4 IOMUXC_(0x300) #define SW_PAD_CTL_PWMO_GPIO1_0_GPIO1_1 IOMUXC_(0x304) #define SW_PAD_CTL_CAPTURE_COMPARE_WATCHDOG_RST IOMUXC_(0x308) /* SW_PAD_CTL flags */ #define SW_PAD_CTL_LOOPBACK (1 << 9) #define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (0 << 7) #if 0 /* Same as 0 */ #define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (1 << 7) #endif #define SW_PAD_CTL_ENABLE_KEEPER (2 << 7) #define SW_PAD_CTL_ENABLE_PULL_UP_OR_PULL_DOWN (3 << 7) #define SW_PAD_CTL_100K_PULL_DOWN (0 << 5) #define SW_PAD_CTL_100K_PULL_UP (1 << 5) #if 0 /* Completeness */ #define SW_PAD_CTL_47K_PULL_UP (2 << 5) /* Not in IMX31/L */ #define SW_PAD_CTL_22K_PULL_UP (3 << 5) /* Not in IMX31/L */ #endif #define SW_PAD_CTL_IPP_HYS_STD (0 << 4) #define SW_PAD_CTL_IPP_HYS_SCHIMDT (1 << 4) #define SW_PAD_CTL_IPP_ODE_CMOS (0 << 3) #define SW_PAD_CTL_IPP_ODE_OPEN (1 << 3) #define SW_PAD_CTL_IPP_DSE_STD (0 << 1) #define SW_PAD_CTL_IPP_DSE_HIGH (1 << 1) #define SW_PAD_CTL_IPP_DSE_MAX (2 << 1) #if 0 /* Same as 2 */ #define SW_PAD_CTL_IPP_DSE_MAX (3 << 1) #endif #define SW_PAD_CTL_IPP_SRE_SLOW (0 << 0) #define SW_PAD_CTL_IPP_SRE_FAST (1 << 0) /* Shift above flags into one of the three fields in each register */ #define SW_PAD_CTL_FLD_0(x) ((x) << 0) #define SW_PAD_CTL_FLD_1(x) ((x) << 10) #define SW_PAD_CTL_FLD_2(x) ((x) << 20) /* IPU */ #define IPU_CONF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x00)) #define IPU_CHA_BUF0_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x04)) #define IPU_CHA_BUF1_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x08)) #define IPU_CHA_DB_MODE_SEL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x0C)) #define IPU_CHA_CUR_BUF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x10)) #define IPU_FS_PROC_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x14)) #define IPU_FS_DISP_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x18)) #define IPU_TASKS_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x1C)) #define IPU_IMA_ADDR (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x20)) #define IPU_IMA_DATA (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x24)) #define IPU_INT_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x28)) #define IPU_INT_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x2C)) #define IPU_INT_CTRL_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x30)) #define IPU_INT_CTRL_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x34)) #define IPU_INT_CTRL_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x38)) #define IPU_INT_STAT_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x3C)) #define IPU_INT_STAT_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x40)) #define IPU_INT_STAT_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x44)) #define IPU_INT_STAT_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x48)) #define IPU_INT_STAT_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x4C)) #define IPU_BRK_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x50)) #define IPU_BRK_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x54)) #define IPU_BRK_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x58)) #define IPU_DIAGB_CTRL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x60)) /* ATA */ #define ATA_TIME_OFF (*(REG8_PTR_T)(ATA_BASE_ADDR+0x00)) #define ATA_TIME_ON (*(REG8_PTR_T)(ATA_BASE_ADDR+0x01)) #define ATA_TIME_1 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x02)) #define ATA_TIME_2W (*(REG8_PTR_T)(ATA_BASE_ADDR+0x03)) /* PIO */ #define ATA_TIME_2R (*(REG8_PTR_T)(ATA_BASE_ADDR+0x04)) #define ATA_TIME_AX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x05)) #define ATA_TIME_4 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x07)) #define ATA_TIME_9 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x08)) /* MDMA */ #define ATA_TIME_M (*(REG8_PTR_T)(ATA_BASE_ADDR+0x09)) #define ATA_TIME_JN (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0A)) #define ATA_TIME_D (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0B)) #define ATA_TIME_K (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0C)) /* UDMA */ #define ATA_TIME_ACK (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0D)) #define ATA_TIME_ENV (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0E)) #define ATA_TIME_PIO_RDX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0F)) #define ATA_TIME_ZAH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x10)) #define ATA_TIME_MLIX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x11)) #define ATA_TIME_DVH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x12)) #define ATA_TIME_DZFS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x13)) #define ATA_TIME_DVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x14)) #define ATA_TIME_CVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x15)) #define ATA_TIME_SS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x16)) #define ATA_TIME_CYC (*(REG8_PTR_T)(ATA_BASE_ADDR+0x17)) /* */ #define ATA_FIFO_DATA_32 (*(REG32_PTR_T)(ATA_BASE_ADDR+0x18)) #define ATA_FIFO_DATA_16 (*(REG16_PTR_T)(ATA_BASE_ADDR+0x1c)) #define ATA_FIFO_FILL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x20)) /* Actually ATA_CONTROL but conflicts arise */ #define ATA_INTF_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x24)) #define ATA_INTERRUPT_PENDING (*(REG8_PTR_T)(ATA_BASE_ADDR+0x28)) #define ATA_INTERRUPT_ENABLE (*(REG8_PTR_T)(ATA_BASE_ADDR+0x2c)) #define ATA_INTERRUPT_CLEAR (*(REG8_PTR_T)(ATA_BASE_ADDR+0x30)) #define ATA_FIFO_ALARM (*(REG8_PTR_T)(ATA_BASE_ADDR+0x34)) #define ATA_DRIVE_DATA (*(REG16_PTR_T)(ATA_BASE_ADDR+0xA0)) #define ATA_DRIVE_FEATURES (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA4)) #define ATA_DRIVE_SECTOR_COUNT (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA8)) #define ATA_DRIVE_SECTOR_NUM (*(REG8_PTR_T)(ATA_BASE_ADDR+0xAC)) #define ATA_DRIVE_CYL_LOW (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB0)) #define ATA_DRIVE_CYL_HIGH (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB4)) #define ATA_DRIVE_CYL_HEAD (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB8)) #define ATA_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* rd */ #define ATA_DRIVE_COMMAND (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* wr */ #define ATA_ALT_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* rd */ #define ATA_DRIVE_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* wr */ /* ATA_INTF_CONTROL flags */ #define ATA_FIFO_RST (1 << 7) #define ATA_ATA_RST (1 << 6) #define ATA_FIFO_TX_EN (1 << 5) #define ATA_FIFO_RCV_EN (1 << 4) #define ATA_DMA_PENDING (1 << 3) #define ATA_DMA_ULTRA_SELECTED (1 << 2) #define ATA_DMA_WRITE (1 << 1) #define ATA_IORDY_EN (1 << 0) /* ATA_INTERRUPT_PENDING, ATA_INTERRUPT_ENABLE, ATA_INTERRUPT_CLEAR flags */ #define ATA_INTRQ1 (1 << 7) #define ATA_FIFO_UNDERFLOW (1 << 6) #define ATA_FIFO_OVERFLOW (1 << 5) #define ATA_CONTROLLER_IDLE (1 << 4) #define ATA_INTRQ2 (1 << 3) /* Timers */ #define EPITCR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x00)) #define EPITSR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x04)) #define EPITLR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x08)) #define EPITCMPR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x0C)) #define EPITCNT1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x10)) #define EPITCR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x00)) #define EPITSR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x04)) #define EPITLR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x08)) #define EPITCMPR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x0C)) #define EPITCNT2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x10)) /* GPIO */ #define GPIO1_DR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x00)) #define GPIO1_GDIR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x04)) #define GPIO1_PSR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x08)) #define GPIO1_ICR1 (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x0C)) #define GPIO1_ICR2 (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x10)) #define GPIO1_IMR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x14)) #define GPIO1_ISR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x18)) #define GPIO2_DR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x00)) #define GPIO2_GDIR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x04)) #define GPIO2_PSR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x08)) #define GPIO2_ICR1 (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x0C)) #define GPIO2_ICR2 (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x10)) #define GPIO2_IMR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x14)) #define GPIO2_ISR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x18)) #define GPIO3_DR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x00)) #define GPIO3_GDIR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x04)) #define GPIO3_PSR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x08)) #define GPIO3_ICR1 (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x0C)) #define GPIO3_ICR2 (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x10)) #define GPIO3_IMR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x14)) #define GPIO3_ISR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x18)) /* SPI */ #define CSPI_RXDATA1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x00)) #define CSPI_TXDATA1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x04)) #define CSPI_CONREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x08)) #define CSPI_INTREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x0C)) #define CSPI_DMAREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x10)) #define CSPI_STATREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x14)) #define CSPI_PERIODREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x18)) #define CSPI_TESTREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x1C0)) #define CSPI_RXDATA2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x00)) #define CSPI_TXDATA2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x04)) #define CSPI_CONREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x08)) #define CSPI_INTREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x0C)) #define CSPI_DMAREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x10)) #define CSPI_STATREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x14)) #define CSPI_PERIODREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x18)) #define CSPI_TESTREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x1C0)) /* RTC */ #define RTC_HOURMIN (*(REG32_PTR_T)(RTC_BASE_ADDR+0x00)) #define RTC_SECONDS (*(REG32_PTR_T)(RTC_BASE_ADDR+0x04)) #define RTC_ALRM_HM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x08)) #define RTC_ALRM_SEC (*(REG32_PTR_T)(RTC_BASE_ADDR+0x0C)) #define RTC_CTL (*(REG32_PTR_T)(RTC_BASE_ADDR+0x10)) #define RTC_ISR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x14)) #define RTC_IENR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x18)) #define RTC_STPWCH (*(REG32_PTR_T)(RTC_BASE_ADDR+0x1C)) #define RTC_DAYR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x20)) #define RTC_DAYALARM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x24)) /* Keypad */ #define KPP_KPCR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x0)) #define KPP_KPSR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x2)) #define KPP_KDDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x4)) #define KPP_KPDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x6)) /* KPP_KPSR bits */ #define KPP_KPSR_KRIE (1 << 9) #define KPP_KPSR_KDIE (1 << 8) #define KPP_KPSR_KRSS (1 << 3) #define KPP_KPSR_KDSC (1 << 2) #define KPP_KPSR_KPKR (1 << 1) #define KPP_KPSR_KPKD (1 << 0) /* ROMPATCH and AVIC */ #define ROMPATCH_BASE_ADDR 0x60000000 /* Since AVIC vector registers are NOT used, we reserve some for various * purposes. Copied from Linux source code. */ #define CHIP_REV_1_0 0x10 #define CHIP_REV_2_0 0x20 #define SYSTEM_REV_ID_REG (AVIC_BASE_ADDR + AVIC_VEC_1) #define SYSTEM_REV_ID_MAG 0xF00C /* * NAND, SDRAM, WEIM, M3IF, EMI controllers */ #define EXT_MEM_CTRL_BASE 0xB8000000 #define NFC_BASE EXT_MEM_CTRL_BASE #define ESDCTL_BASE 0xB8001000 #define WEIM_BASE_ADDR 0xB8002000 #define WEIM_CTRL_CS0 (WEIM_BASE_ADDR+0x00) #define WEIM_CTRL_CS1 (WEIM_BASE_ADDR+0x10) #define WEIM_CTRL_CS2 (WEIM_BASE_ADDR+0x20) #define WEIM_CTRL_CS3 (WEIM_BASE_ADDR+0x30) #define WEIM_CTRL_CS4 (WEIM_BASE_ADDR+0x40) #define M3IF_BASE 0xB8003000 #define PCMCIA_CTL_BASE 0xB8004000 /* * Memory regions and CS */ #define IPU_MEM_BASE_ADDR 0x70000000 #define CSD0_BASE_ADDR 0x80000000 #define CSD1_BASE_ADDR 0x90000000 #define CS0_BASE_ADDR 0xA0000000 #define CS1_BASE_ADDR 0xA8000000 #define CS2_BASE_ADDR 0xB0000000 #define CS3_BASE_ADDR 0xB2000000 #define CS4_BASE_ADDR 0xB4000000 #define CS4_BASE_PSRAM 0xB5000000 #define CS5_BASE_ADDR 0xB6000000 #define PCMCIA_MEM_BASE_ADDR 0xC0000000 #define INTERNAL_ROM_VA 0xF0000000 /* * SDRAM */ #define RAM_BANK0_BASE SDRAM_BASE_ADDR /* * IRQ Controller Register Definitions. */ #define AVIC_BASE_ADDR 0x68000000 #define INTCNTL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x00)) #define NIMASK (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x04)) #define INTENNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x08)) #define INTDISNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x0C)) #define INTENABLEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x10)) #define INTENABLEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x14)) #define INTTYPEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x18)) #define INTTYPEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x1C)) #define NIPRIORITY(n) (((REG32_PTR_T)(AVIC_BASE_ADDR+0x20))[n]) #define NIPRIORITY7 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x20)) #define NIPRIORITY6 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x24)) #define NIPRIORITY5 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x28)) #define NIPRIORITY4 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x2C)) #define NIPRIORITY3 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x30)) #define NIPRIORITY2 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x34)) #define NIPRIORITY1 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x38)) #define NIPRIORITY0 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x3C)) #define NIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x40)) #define FIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x44)) #define INTSRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x48)) #define INTSRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x4C)) #define INTFRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x50)) #define INTFRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x54)) #define NIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x58)) #define NIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x5C)) #define FIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x60)) #define FIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x64)) #define VECTOR_BASE_ADDR (AVIC_BASE_ADDR+0x100) #define VECTOR(n) (((REG32_PTR_T)VECTOR_BASE_ADDR)[n]) /* The vectors go all the way up to 63. 4 bytes for each */ #define INTCNTL_ABFLAG (1 << 25) #define INTCNTL_ABFEN (1 << 24) #define INTCNTL_NIDIS (1 << 22) #define INTCNTL_FIDIS (1 << 21) #define INTCNTL_NIAD (1 << 20) #define INTCNTL_FIAD (1 << 19) #define INTCNTL_NM (1 << 18) /* L210 */ #define L2CC_BASE_ADDR 0x30000000 #define L2_CACHE_LINE_SIZE 32 #define L2_CACHE_CTL_REG 0x100 #define L2_CACHE_AUX_CTL_REG 0x104 #define L2_CACHE_SYNC_REG 0x730 #define L2_CACHE_INV_LINE_REG 0x770 #define L2_CACHE_INV_WAY_REG 0x77C #define L2_CACHE_CLEAN_LINE_REG 0x7B0 #define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0 #define L2CC_CACHE_SYNC (*(REG32_PTR_T)(L2CC_BASE_ADDR+L2_CACHE_SYNC_REG)) /* CCM */ #define CLKCTL_CCMR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x00)) #define CLKCTL_PDR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x04)) #define CLKCTL_PDR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x08)) #define CLKCTL_PDR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x64)) #define CLKCTL_RCSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x0C)) #define CLKCTL_MPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x10)) #define CLKCTL_UPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x14)) #define CLKCTL_SPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x18)) #define CLKCTL_COSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x1C)) #define CLKCTL_CGR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x20)) #define CLKCTL_CGR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x24)) #define CLKCTL_CGR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x28)) #define CLKCTL_WIMR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x2C)) #define CLKCTL_PMCR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x5C)) #define PLL_REF_CLK 26000000 /* WEIM - CS0 */ #define CSCRU 0x00 #define CSCRL 0x04 #define CSCRA 0x08 /* ESDCTL */ #define ESDCTL_ESDCTL0 0x00 #define ESDCTL_ESDCFG0 0x04 #define ESDCTL_ESDCTL1 0x08 #define ESDCTL_ESDCFG1 0x0C #define ESDCTL_ESDMISC 0x10 /* More UART 1 Register defines */ #define URXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x00)) #define UTXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x40)) #define UCR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x80)) #define UCR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x84)) #define UCR3_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x88)) #define UCR4_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x8C)) #define UFCR1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x90)) #define USR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x94)) #define USR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x98)) #define UTS1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0xB4)) /* * UART Control Register 0 Bit Fields. */ #define EUARTUCR1_ADEN (1 << 15) // Auto detect interrupt #define EUARTUCR1_ADBR (1 << 14) // Auto detect baud rate #define EUARTUCR1_TRDYEN (1 << 13) // Transmitter ready interrupt enable #define EUARTUCR1_IDEN (1 << 12) // Idle condition interrupt #define EUARTUCR1_RRDYEN (1 << 9) // Recv ready interrupt enable #define EUARTUCR1_RDMAEN (1 << 8) // Recv ready DMA enable #define EUARTUCR1_IREN (1 << 7) // Infrared interface enable #define EUARTUCR1_TXMPTYEN (1 << 6) // Transimitter empt interrupt enable #define EUARTUCR1_RTSDEN (1 << 5) // RTS delta interrupt enable #define EUARTUCR1_SNDBRK (1 << 4) // Send break #define EUARTUCR1_TDMAEN (1 << 3) // Transmitter ready DMA enable #define EUARTUCR1_DOZE (1 << 1) // Doze #define EUARTUCR1_UARTEN (1 << 0) // UART enabled #define EUARTUCR2_ESCI (1 << 15) // Escape seq interrupt enable #define EUARTUCR2_IRTS (1 << 14) // Ignore RTS pin #define EUARTUCR2_CTSC (1 << 13) // CTS pin control #define EUARTUCR2_CTS (1 << 12) // Clear to send #define EUARTUCR2_ESCEN (1 << 11) // Escape enable #define EUARTUCR2_PREN (1 << 8) // Parity enable #define EUARTUCR2_PROE (1 << 7) // Parity odd/even #define EUARTUCR2_STPB (1 << 6) // Stop #define EUARTUCR2_WS (1 << 5) // Word size #define EUARTUCR2_RTSEN (1 << 4) // Request to send interrupt enable #define EUARTUCR2_ATEN (1 << 3) // Aging timer enable #define EUARTUCR2_TXEN (1 << 2) // Transmitter enabled #define EUARTUCR2_RXEN (1 << 1) // Receiver enabled #define EUARTUCR2_SRST_ (1 << 0) // SW reset #define EUARTUCR3_PARERREN (1 << 12) // Parity enable #define EUARTUCR3_FRAERREN (1 << 11) // Frame error interrupt enable #define EUARTUCR3_ADNIMP (1 << 7) // Autobaud detection not improved #define EUARTUCR3_RXDSEN (1 << 6) // Receive status interrupt enable #define EUARTUCR3_AIRINTEN (1 << 5) // Async IR wake interrupt enable #define EUARTUCR3_AWAKEN (1 << 4) // Async wake interrupt enable #define EUARTUCR3_RXDMUXSEL (1 << 2) // RXD muxed input selected #define EUARTUCR3_INVT (1 << 1) // Inverted Infrared transmission #define EUARTUCR3_ACIEN (1 << 0) // Autobaud counter interrupt enable #define EUARTUCR4_CTSTL_32 (32 << 10) // CTS trigger level (32 chars) #define EUARTUCR4_INVR (1 << 9) // Inverted infrared reception #define EUARTUCR4_ENIRI (1 << 8) // Serial infrared interrupt enable #define EUARTUCR4_WKEN (1 << 7) // Wake interrupt enable #define EUARTUCR4_IRSC (1 << 5) // IR special case #define EUARTUCR4_LPBYP (1 << 4) // Low power bypass #define EUARTUCR4_TCEN (1 << 3) // Transmit complete interrupt enable #define EUARTUCR4_BKEN (1 << 2) // Break condition interrupt enable #define EUARTUCR4_OREN (1 << 1) // Receiver overrun interrupt enable #define EUARTUCR4_DREN (1 << 0) // Recv data ready interrupt enable #define EUARTUFCR_RXTL_SHF 0 // Receiver trigger level shift #define EUARTUFCR_RFDIV_1 (5 << 7) // Reference freq divider (div> 1) #define EUARTUFCR_RFDIV_2 (4 << 7) // Reference freq divider (div> 2) #define EUARTUFCR_RFDIV_3 (3 << 7) // Reference freq divider (div 3) #define EUARTUFCR_RFDIV_4 (2 << 7) // Reference freq divider (div 4) #define EUARTUFCR_RFDIV_5 (1 << 7) // Reference freq divider (div 5) #define EUARTUFCR_RFDIV_6 (0 << 7) // Reference freq divider (div 6) #define EUARTUFCR_RFDIV_7 (6 << 7) // Reference freq divider (div 7) #define EUARTUFCR_TXTL_SHF 10 // Transmitter trigger level shift #define EUARTUSR1_PARITYERR (1 << 15) // Parity error interrupt flag #define EUARTUSR1_RTSS (1 << 14) // RTS pin status #define EUARTUSR1_TRDY (1 << 13) // Transmitter ready interrupt/dma flag #define EUARTUSR1_RTSD (1 << 12) // RTS delta #define EUARTUSR1_ESCF (1 << 11) // Escape seq interrupt flag #define EUARTUSR1_FRAMERR (1 << 10) // Frame error interrupt flag #define EUARTUSR1_RRDY (1 << 9) // Receiver ready interrupt/dma flag #define EUARTUSR1_AGTIM (1 << 8) // Aging timeout interrupt status #define EUARTUSR1_RXDS (1 << 6) // Receiver idle interrupt flag #define EUARTUSR1_AIRINT (1 << 5) // Async IR wake interrupt flag #define EUARTUSR1_AWAKE (1 << 4) // Aysnc wake interrupt flag #define EUARTUSR2_ADET (1 << 15) // Auto baud rate detect complete #define EUARTUSR2_TXFE (1 << 14) // Transmit buffer FIFO empty #define EUARTUSR2_IDLE (1 << 12) // Idle condition #define EUARTUSR2_ACST (1 << 11) // Autobaud counter stopped #define EUARTUSR2_IRINT (1 << 8) // Serial infrared interrupt flag #define EUARTUSR2_WAKE (1 << 7) // Wake #define EUARTUSR2_RTSF (1 << 4) // RTS edge interrupt flag #define EUARTUSR2_TXDC (1 << 3) // Transmitter complete #define EUARTUSR2_BRCD (1 << 2) // Break condition #define EUARTUSR2_ORE (1 << 1) // Overrun error #define EUARTUSR2_RDR (1 << 0) // Recv data ready #define EUARTUTS_FRCPERR (1 << 13) // Force parity error #define EUARTUTS_LOOP (1 << 12) // Loop tx and rx #define EUARTUTS_TXEMPTY (1 << 6) // TxFIFO empty #define EUARTUTS_RXEMPTY (1 << 5) // RxFIFO empty #define EUARTUTS_TXFULL (1 << 4) // TxFIFO full #define EUARTUTS_RXFULL (1 << 3) // RxFIFO full #define EUARTUTS_SOFTRST (1 << 0) // Software reset #define L2CC_ENABLED /* Assuming 26MHz input clock */ /* PD MFD MFI MFN */ #define MPCTL_PARAM_208 ((1 << 26) + (0 << 16) + (8 << 10) + (0 << 0)) #define MPCTL_PARAM_399 ((0 << 26) + (51 << 16) + (7 << 10) + (35 << 0)) #define MPCTL_PARAM_532 ((0 << 26) + (51 << 16) + (10 << 10) + (12 << 0)) /* UPCTL PD MFD MFI MFN */ #define UPCTL_PARAM_288 (((1-1) << 26) + ((13-1) << 16) + (5 << 10) + (7 << 0)) #define UPCTL_PARAM_240 (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0)) /* PDR0 */ #define PDR0_208_104_52 0xFF870D48 /* ARM=208MHz, HCLK=104MHz, IPG=52MHz */ #define PDR0_399_66_66 0xFF872B28 /* ARM=399MHz, HCLK=IPG=66.5MHz */ #define PDR0_399_133_66 0xFF871650 /* ARM=399MHz, HCLK=133MHz, IPG=66.5MHz */ #define PDR0_532_133_66 0xFF871E58 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */ #define PDR0_665_83_66 0xFF873D78 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */ #define PDR0_665_133_66 0xFF872660 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */ #define PBC_BASE CS4_BASE_ADDR /* Peripheral Bus Controller */ #define PBC_BSTAT2 0x2 #define PBC_BCTRL1 0x4 #define PBC_BCTRL1_CLR 0x6 #define PBC_BCTRL2 0x8 #define PBC_BCTRL2_CLR 0xA #define PBC_BCTRL3 0xC #define PBC_BCTRL3_CLR 0xE #define PBC_BCTRL4 0x10 #define PBC_BCTRL4_CLR 0x12 #define PBC_BSTAT1 0x14 #define MX31EVB_CS_LAN_BASE (CS4_BASE_ADDR + 0x00020000 + 0x300) #define MX31EVB_CS_UART_BASE (CS4_BASE_ADDR + 0x00010000) #define REDBOOT_IMAGE_SIZE 0x40000 #define SDRAM_WORKAROUND_FULL_PAGE #define ARMHIPG_208_52_52 /* ARM: 208MHz, HCLK=IPG=52MHz*/ #define ARMHIPG_52_52_52 /* ARM: 52MHz, HCLK=IPG=52MHz*/ #define ARMHIPG_399_66_66 #define ARMHIPG_399_133_66 /* MX31 EVB SDRAM is from 0x80000000, 64M */ #define SDRAM_BASE_ADDR CSD0_BASE_ADDR #define SDRAM_SIZE 0x04000000 #define UART_WIDTH_32 /* internal UART is 32bit access only */ #define EXT_UART_x16 #define UART_WIDTH_32 /* internal UART is 32bit access only */ #define FLASH_BURST_MODE_ENABLE 1 #define SDRAM_COMPARE_CONST1 0x55555555 #define SDRAM_COMPARE_CONST2 0xAAAAAAAA #define UART_FIFO_CTRL 0x881 #define TIMEOUT 1000 #define writel(v,a) (*(REG32_PTR_T)(a) = (v)) #define readl(a) (*(REG32_PTR_T)(a)) #define writew(v,a) (*(REG16_PTR_T)(a) = (v)) #define readw(a) (*(REG16_PTR_T)(a))