/* * This config file is for the Sandisk Sansa Fuze v2 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 68 #define MODEL_NAME "Sandisk Sansa Fuze v2" #define HW_SAMPR_CAPS SAMPR_CAP_ALL /* define this if you have recording possibility */ #define HAVE_RECORDING #define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) /* because the samplerates don't match at each point, we must be able to * tell PCM which set of rates to use. not needed if recording rates are * a simple subset of playback rates and are equal values. */ #define CONFIG_SAMPR_TYPES /* Default recording levels */ #define DEFAULT_REC_MIC_GAIN 23 #define DEFAULT_REC_LEFT_GAIN 23 #define DEFAULT_REC_RIGHT_GAIN 23 /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR #ifndef BOOTLOADER/* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if you have LCD enable function */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING */ /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT #ifndef BOOTLOADER /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_AS3514 /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM #endif /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL /* define to activate advanced wheel acceleration code */ #define HAVE_WHEEL_ACCELERATION /* define from which rotation speed [degree/sec] on the acceleration starts */ #define WHEEL_ACCEL_START 720 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ #define WHEEL_ACCELERATION 1 #endif /* !BOOTLOADER */ /* put the lcd frame buffer in IRAM */ #define IRAM_LCDFRAMEBUFFER //IBSS_ATTR #define CONFIG_KEYPAD SANSA_FUZE_PAD /* Define this to have CPU boosted while scrolling in the UI */ #define HAVE_GUI_BOOST /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* LCD dimensions */ #define LCD_WIDTH 220 #define LCD_HEIGHT 176 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */ /* AS3514 or newer */ #define HAVE_AS3514 #define HAVE_AS3543 /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Some Sansa Fuzes seem to be FAT16 formatted */ #define HAVE_FAT16SUPPORT /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE (0x100000-0x8000) /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define AB_REPEAT_ENABLE /* FM Tuner - suspected to be the SI4702 */ #define CONFIG_TUNER (SI4700|RDA5802) /* #define HAVE_TUNER_PWR_CTRL */ /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 12 #define DEFAULT_BRIGHTNESS_SETTING 6 /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD #define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_TARGET /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have an AMS AS3525v2 */ #define CONFIG_CPU AS3525v2 /* Define this if you want to use the AS2525 i2c interface */ #define CONFIG_I2C I2C_AS3525 /* define current usage levels (based on battery bench) */ #define CURRENT_NORMAL 26 #define CURRENT_BACKLIGHT 30 #define CURRENT_RECORD CURRENT_NORMAL /* maximum charging current */ #define CURRENT_MAX_CHG 200 /* Define this to the CPU frequency */ #define CPU_FREQ 240000000 /* Type of LCD */ #define CONFIG_LCD LCD_FUZE /* Offset ( in the firmware file's header ) to the file CRC and data. These are only used when loading the old format rockbox.e200 file */ #define FIRMWARE_OFFSET_FILE_CRC 0x0 #define FIRMWARE_OFFSET_FILE_DATA 0x8 #ifndef BOOTLOADER #define HAVE_MULTIDRIVE #define NUM_DRIVES 2 #define HAVE_HOTSWAP #endif /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_S3C6400X /* enable these for the experimental usb stack */ #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x0781 #define USB_PRODUCT_ID 0x74c3 /* MSC = 0x74c3, MTP = 0x74c2 */ /* Define this if you have adjustable CPU frequency */ //#define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "sansa" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define INCLUDE_TIMEOUT_API /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY