/* * This config file is for the Sandisk Sansa c200v2 */ /* For Rolo and boot loader */ #define MODEL_NUMBER 44 #define MODEL_NAME "Sandisk Sansa c200v2 series" #define FIRMWARE_OFFSET_FILE_DATA 8 #define FIRMWARE_OFFSET_FILE_CRC 0 #define HW_SAMPR_CAPS SAMPR_CAP_ALL /* define this if you have recording possibility */ #define HAVE_RECORDING #define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) /* because the samplerates don't match at each point, we must be able to * tell PCM which set of rates to use. not needed if recording rates are * a simple subset of playback rates and are equal values. */ #define CONFIG_SAMPR_TYPES /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have a light associated with the buttons */ #define HAVE_BUTTON_LIGHT /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* LCD dimensions */ #define LCD_WIDTH 132 #define LCD_HEIGHT 80 /* sqrt(132^2 + 80^2) / 1.4 = 110.3 */ #define LCD_DPI 110 #define LCD_DEPTH 16 /* 65536 colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* define this if you have LCD enable function */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ /* TODO: #define HAVE_LCD_SLEEP */ /* TODO: #define HAVE_LCD_SLEEP_SETTING <= optional */ /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST #define MIN_CONTRAST_SETTING 0 #define MAX_CONTRAST_SETTING 127 #define DEFAULT_CONTRAST_SETTING 85 #if 0 /* not enough room for a 16 bits framebuffer */ #define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */ #endif #define CONFIG_KEYPAD SANSA_C200_PAD /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* There is no hardware tone control */ #define HAVE_SW_TONE_CONTROLS /* The AS3525 has a built-in AS3514 (or a newer version) */ #define HAVE_AS3514 /* define this if you have a real-time clock */ #ifndef BOOTLOADER #define CONFIG_RTC RTC_AS3514 #endif /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* Some Sansa E200s seem to be FAT16 formatted */ #define HAVE_FAT16SUPPORT /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x48000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x14000 #define AB_REPEAT_ENABLE /* FM Tuner - suspected to be the SI4702 */ #define CONFIG_TUNER SI4700 /* #define HAVE_TUNER_PWR_CTRL */ /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* define this if the flash memory uses the SecureDigital Memory Card protocol */ #define CONFIG_STORAGE STORAGE_SD #define BATTERY_CAPACITY_DEFAULT 530 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 530 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 530 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 0 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_TARGET /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if you have a PortalPlayer PP5024 */ #define CONFIG_CPU AS3525 /* Define how much SD sectors are reserved for OF */ #define AMS_OF_SIZE 0x5000 /* Define this if you want to use the PP5024 i2c interface */ #define CONFIG_I2C I2C_AS3525 /* define this if the hardware can be powered off while charging */ /* Sansa can't be powered off while charging */ /* #define HAVE_POWEROFF_WHILE_CHARGING */ #define CURRENT_NORMAL 50 #define CURRENT_BACKLIGHT 25 #define CURRENT_RECORD CURRENT_NORMAL /* maximum charging current */ #define CURRENT_MAX_CHG 200 /* The start address index for ROM builds */ #define ROM_START 0x00000000 /* Define this to the CPU frequency */ #define CPU_FREQ 248000000 /* Type of LCD : Samsung S6B33B2 */ #define CONFIG_LCD LCD_C200 #ifndef BOOTLOADER #define HAVE_MULTIDRIVE #define NUM_DRIVES 2 #define HAVE_HOTSWAP #endif /* BOOTLOADER */ #define CONFIG_USBOTG USBOTG_AS3525 /* enable these for the experimental usb stack */ #define HAVE_USBSTACK //#define USB_HANDLED_BY_OF #define USE_ROCKBOX_USB //#define USB_ENABLE_SERIAL #define USB_VENDOR_ID 0x0781 #define USB_PRODUCT_ID 0x7452 #define HAVE_USB_HID_MOUSE /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "sansa" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define ICODE_ATTR_TREMOR_NOT_MDCT #define INCLUDE_TIMEOUT_API /** Port-specific settings **/ /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 12 #define DEFAULT_BRIGHTNESS_SETTING 6 /* Default recording levels */ #define DEFAULT_REC_MIC_GAIN 23 #define DEFAULT_REC_LEFT_GAIN 23 #define DEFAULT_REC_RIGHT_GAIN 23 /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY