/*
 * This config file is for Samsung YP-S3
 */

/* For Rolo and boot loader */
#define MODEL_NUMBER 53

#define MODEL_NAME   "Samsumg YP-S3"

/* define this if you have recording possibility */
//#define HAVE_RECORDING

/* Define bitmask of input sources - recordable bitmask can be defined
   explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)

/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)

/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS  (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)

/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP

/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP

/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you can invert the colours on your LCD */
//#define HAVE_LCD_INVERT

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE

#define CONFIG_STORAGE STORAGE_NAND

#define CONFIG_NAND NAND_SAMSUNG

/* LCD dimensions */
#define LCD_WIDTH  176
#define LCD_HEIGHT 220
/* sqrt(176^2 + 220^2) / 1.8 = 156.5 */
#define LCD_DPI 157
#define LCD_DEPTH  16   /* pseudo 262.144 colors */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */

/* Define this if your LCD can be enabled/disabled */
//#define HAVE_LCD_ENABLE

/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
   should be defined as well. */
//#define HAVE_LCD_SLEEP

/* We have button lights */
#define HAVE_BUTTON_LIGHT

#define CONFIG_KEYPAD MEIZU_M3_PAD

/* We have headphone detection */
#define HAVE_HEADPHONE_DETECTION

//#define AB_REPEAT_ENABLE
//#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE

/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC

/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_S35390A

/* Define the type of audio codec */
//#define HAVE_WM....

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000

/* FM Tuner */
#define CONFIG_TUNER       SI4700
#define CONFIG_TUNER_XTAL  32768

/* assume no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS

#define BATTERY_CAPACITY_DEFAULT 580 /* default battery capacity */
#define BATTERY_CAPACITY_MIN     580   /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX     580  /* max. capacity selectable */
#define BATTERY_CAPACITY_INC     0    /* capacity increment */
#define BATTERY_TYPES_COUNT      1     /* only one type */

#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE

/* Hardware controlled charging, software can monitor plug and charge state */
#define CONFIG_CHARGING CHARGING_MONITOR

/* Define this if your LCD can set contrast */
//#define HAVE_LCD_CONTRAST

/* We have a Samsung S5L8700 */
#define CONFIG_CPU S5L8700

/* We use the S5L8700 i2c interface */
#define CONFIG_I2C I2C_S5L8700

/* define this if the hardware can be powered off while charging */
//#define HAVE_POWEROFF_WHILE_CHARGING

/* The size of the flash ROM */
#define FLASH_SIZE 0x400000

/* Define this to the CPU frequency */
#define CPU_FREQ      200000000

/* Define this if you have ATA power-off control */
//#define HAVE_ATA_POWER_OFF

/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0

/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8

/* USB */
//#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x04E8
#define USB_PRODUCT_ID 0x5090

/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ

#define BOOTFILE_EXT "yps3"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"

//#define BOOTLOADER_ENTRYPOINT  0x001F0000
//#define FLASH_ENTRYPOINT       0x00001000
//#define FLASH_MAGIC            0xfbfbfbf1

/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN

/** Port-specific settings **/

/* Main LCD contrast range and defaults */
#define MIN_CONTRAST_SETTING        1
#define MAX_CONTRAST_SETTING        30
#define DEFAULT_CONTRAST_SETTING    19 /* Match boot contrast */

/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING      0
#define MAX_BRIGHTNESS_SETTING      15
#define DEFAULT_BRIGHTNESS_SETTING  10

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY