/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2008 by Maurus Cuelenaere * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * This config file is for the Onda VX747(+)/VX777 */ #define TARGET_TREE /* this target is using the target tree system */ #define CONFIG_SDRAM_START 0x80004000 #ifdef ONDA_VX747P #define MODEL_NAME "Onda VX747+" #define MODEL_NUMBER 54 /* Define something for camera interface... */ #else #define MODEL_NAME "Onda VX747" #define MODEL_NUMBER 45 #endif /* Support FAT16 for SD cards <= 2GB */ #define HAVE_FAT16SUPPORT /* ChinaChip NAND FTL */ #define CONFIG_NAND NAND_CC /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ //#define HAVE_VOLUME_IN_LIST /* LCD dimensions */ #define CONFIG_LCD LCD_ONDAVX747 #ifdef BOOTLOADER /* OF requires landscape */ #define LCD_WIDTH 400 #define LCD_HEIGHT 240 #else #define LCD_WIDTH 240 #define LCD_HEIGHT 400 #endif #define LCD_DEPTH 16 /* 16bit colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE #define CONFIG_KEYPAD ONDAVX747_PAD #define HAVE_TOUCHSCREEN #define HAVE_BUTTON_DATA /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_JZ47XX /* Tuner config */ #define CONFIG_TUNER TEA5767 #define CONFIG_TUNER_XTAL 32768 /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Which backlight fading type? */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 16 #define DEFAULT_BRIGHTNESS_SETTING 16 /* "full brightness" */ #define DEFAULT_DIMNESS_SETTING 1 /* "most dim" */ /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x100000 /* Define this if you have the Jz4740 internal codec */ #define HAVE_JZ4740_CODEC /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) /* has no tone controls, so we use the software ones */ #define HAVE_SW_TONE_CONTROLS /* has no volume control, so we use the software ones */ #define HAVE_SW_VOLUME_CONTROL /* software controlled volume ranges from -73 -> 0 dB, other than that is controlled by hardware */ #define SW_VOLUME_MIN -73 #define SW_VOLUME_MAX 0 /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) #define CONFIG_I2C I2C_JZ47XX #define NEED_ADC_CLOSE 1 #define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 100 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* There is only USB charging */ #define HAVE_USB_POWER #define CFG_EXTAL 12000000 /* EXT clock: 12 Mhz */ /* No access to the NAND yet.. #define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD) #define NUM_DRIVES 2 */ #define CONFIG_STORAGE (STORAGE_SD) #define HAVE_MULTIDRIVE #define NUM_DRIVES 1 #define HAVE_HOTSWAP_STORAGE_AS_MAIN #define INCLUDE_TIMEOUT_API /* Define this if media can be exchanged on the fly */ #define HAVE_HOTSWAP /* Define this if you have a Ingenic JZ4732 */ #define CONFIG_CPU JZ4732 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* Define this if you have a speaker */ #define HAVE_SPEAKER /* Define this to the CPU frequency */ #define CPU_FREQ 336000000 /* CPU clock: 336 MHz */ /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #ifdef ONDA_VX747P #define BOOTFILE_EXT "vx747p" #else #define BOOTFILE_EXT "vx747" #endif #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" #define CONFIG_USBOTG USBOTG_JZ4740 #define HAVE_USBSTACK #define USE_ROCKBOX_USB #define USB_VENDOR_ID 0x07C4 #define USB_PRODUCT_ID 0xA4A5