/* * This config file is for iPod Nano 2nd Generation */ #define IPOD_ARCH 1 /* For Rolo and boot loader */ #define MODEL_NUMBER 62 #define MODEL_NAME "Apple iPod Nano 2g" /* define this if you have recording possibility */ //#define HAVE_RECORDING /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS (SRC_CAP_LINEIN) /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \ | SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \ | SAMPR_CAP_64 | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \ | SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \ | SAMPR_CAP_64 | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8) /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you can flip your LCD */ //#define HAVE_LCD_FLIP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you can invert the colours on your LCD */ //#define HAVE_LCD_INVERT /* LCD stays visible without backlight - simulator hint */ #define HAVE_TRANSFLECTIVE_LCD /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you have access to the pitchscreen */ #define HAVE_PITCHSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the unit uses a scrollwheel for navigation */ #define HAVE_SCROLLWHEEL #define HAVE_WHEEL_ACCELERATION #define WHEEL_ACCEL_START 270 #define WHEEL_ACCELERATION 3 /* Define this if you can detect headphones */ #define HAVE_HEADPHONE_DETECTION /* define this if you have a flash memory storage */ #define HAVE_FLASH_STORAGE #define CONFIG_STORAGE STORAGE_NAND #define CONFIG_NAND NAND_SAMSUNG /* define this if at least one storage driver needs to do cleanup on shutdown */ #define HAVE_STORAGE_FLUSH /* The NAND flash has 2048-byte sectors, and is our only storage */ #define SECTOR_SIZE 2048 /* LCD dimensions */ #define LCD_WIDTH 176 #define LCD_HEIGHT 132 #define LCD_DEPTH 16 /* pseudo 262.144 colors */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ /* Define this if the LCD can shut down */ #define HAVE_LCD_SHUTDOWN /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE should be defined as well. */ #ifndef BOOTLOADER #define HAVE_LCD_SLEEP #define HAVE_LCD_SLEEP_SETTING #endif #define CONFIG_KEYPAD IPOD_4G_PAD /* Define this to have CPU boosted while scrolling in the UI */ #define HAVE_GUI_BOOST #define AB_REPEAT_ENABLE #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_NANO2G /* Define if the device can wake from an RTC alarm */ //#define HAVE_RTC_ALARM #define CONFIG_LCD LCD_NANO2G /* Define the type of audio codec */ #define HAVE_WM8975 #define HAVE_PCM_DMA_ADDRESS /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT #define HAVE_BACKLIGHT_BRIGHTNESS /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 500 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 10 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* Hardware controlled charging with monitoring */ #define CONFIG_CHARGING CHARGING_MONITOR /* define current usage levels */ #define CURRENT_NORMAL 17 /* playback @48MHz clock, lcd sleep*/ #define CURRENT_BACKLIGHT 23 /* maximum brightness */ /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER /* Define this if your LCD can set contrast */ //#define HAVE_LCD_CONTRAST /* Define Apple remote tuner */ //#define CONFIG_TUNER IPOD_REMOTE_TUNER //#define HAVE_RDS_CAP /* The exact type of CPU */ #define CONFIG_CPU S5L8701 /* I2C interface */ #define CONFIG_I2C I2C_S5L8700 #define HAVE_USB_CHARGING_ENABLE /* The size of the flash ROM */ #define FLASH_SIZE 0x400000 /* Define this to the CPU frequency */ #define CPU_FREQ 191692800 /* define this if the hardware can be powered off while charging */ #define HAVE_POWEROFF_WHILE_CHARGING /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 /* Define this if you can read an absolute wheel position */ #define HAVE_WHEEL_POSITION #define HAVE_HARDWARE_CLICK /* Define this if you have adjustable CPU frequency */ #define HAVE_ADJUSTABLE_CPU_FREQ #define BOOTFILE_EXT "ipod" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* Alternative bootfile extension - this is for encrypted images */ #define BOOTFILE_EXT2 "ipodx" /* Define this for FM radio input available */ #define HAVE_FMRADIO_IN /** Port-specific settings **/ #if 0 /* Main LCD contrast range and defaults */ #define MIN_CONTRAST_SETTING 1 #define MAX_CONTRAST_SETTING 30 #define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */ #endif /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 0x2e #define DEFAULT_BRIGHTNESS_SETTING 0x20 /* USB defines */ #define HAVE_USBSTACK #define HAVE_USB_HID_MOUSE #define CONFIG_USBOTG USBOTG_S3C6400X #define USB_VENDOR_ID 0x05AC #define USB_PRODUCT_ID 0x1260 #define USB_NUM_ENDPOINTS 6 #define USE_ROCKBOX_USB #define USB_DEVBSS_ATTR __attribute__((aligned(16))) /* Define this if you can switch on/off the accessory power supply */ #define HAVE_ACCESSORY_SUPPLY //#define IPOD_ACCESSORY_PROTOCOL //#define HAVE_SERIAL /* Define this, if you can switch on/off the lineout */ #define HAVE_LINEOUT_POWEROFF #define USB_WRITE_BUFFER_SIZE (1024*64) /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY