/* * This config file is for toshiba Gigabeat S */ #define TOSHIBA_GIGABEAT_S 1 #define MODEL_NAME "Toshiba Gigabeat S" /* System source clock frequencies (Hz) */ #define CONFIG_CKIL_FREQ 32768 /* RTC Crystal, Tuner */ #define CONFIG_CKIH_FREQ 27000000 /* PLL Reference */ /* For Rolo and boot loader */ #define MODEL_NUMBER 21 /* define this if you use an ATA controller */ #define CONFIG_STORAGE STORAGE_ATA /* For the Gigabeat S, we mount the second partition */ #define CONFIG_DEFAULT_PARTNUM 1 /*define this if the ATA controller and method of USB access support LBA48 */ #define HAVE_LBA48 /* define this if you have a bitmap LCD display */ #define HAVE_LCD_BITMAP /* define this if you have a colour LCD */ #define HAVE_LCD_COLOR /* define this if you want album art for this target */ #define HAVE_ALBUMART /* define this to enable bitmap scaling */ #define HAVE_BMP_SCALING /* define this to enable JPEG decoding */ #define HAVE_JPEG /* define this if you have access to the quickscreen */ #define HAVE_QUICKSCREEN /* define this if you would like tagcache to build on this target */ #define HAVE_TAGCACHE /* define this if the target has volume keys which can be used in the lists */ #define HAVE_VOLUME_IN_LIST /* LCD dimensions */ #define LCD_WIDTH 240 #define LCD_HEIGHT 320 /* sqrt(240^2 + 320^2) / 2.4 = 166.7 */ #define LCD_DPI 167 #define LCD_DEPTH 16 /* 65k colours */ #define LCD_PIXELFORMAT RGB565 /* rgb565 */ #define CONFIG_KEYPAD GIGABEAT_S_PAD /* Define this to enable morse code input */ #define HAVE_MORSE_INPUT /* Define this if you do software codec */ #define CONFIG_CODEC SWCODEC /* define this if you have a real-time clock */ #define CONFIG_RTC RTC_MC13783 /* Define if the device can wake from an RTC alarm */ #define HAVE_RTC_ALARM /* Define this for LCD backlight available */ #define HAVE_BACKLIGHT /* define this if you have a disk storage, i.e. something that needs spinups and can cause skips when shaked */ #define HAVE_DISK_STORAGE /* Define this if you have a software controlled poweroff */ #define HAVE_SW_POWEROFF /* The number of bytes reserved for loadable codecs */ #define CODEC_SIZE 0x100000 /* The number of bytes reserved for loadable plugins */ #define PLUGIN_BUFFER_SIZE 0x80000 #define AB_REPEAT_ENABLE /* Define this if you have a SI4700 fm radio tuner */ #define CONFIG_TUNER SI4700 #define HAVE_RDS_CAP #define RDS_ISR_PROCESSING /* Define this if you have the WM8978 audio codec */ #define HAVE_WM8978 /* Define bitmask of input sources - recordable bitmask can be defined explicitly if different */ #define INPUT_SRC_CAPS SRC_CAP_FMRADIO /* define the bitmask of hardware sample rates */ #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) /* define the bitmask of recording sample rates */ #define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */ /* define default recording levels */ #define DEFAULT_REC_LEFT_GAIN 0 #define DEFAULT_REC_RIGHT_GAIN 0 /* Define this if you have recording capability */ #define HAVE_RECORDING /* Define this if your LCD can be put to sleep. */ #define HAVE_LCD_SLEEP /* We don't use a setting but a fixed delay after the backlight has * turned off */ #define LCD_SLEEP_TIMEOUT (2*HZ) /* Define this if your LCD can be enabled/disabled */ #define HAVE_LCD_ENABLE #ifndef BOOTLOADER /* define this if you can flip your LCD */ #define HAVE_LCD_FLIP /* define this if you can invert the colours on your LCD */ #define HAVE_LCD_INVERT /* Define this if your LCD can set contrast */ #define HAVE_LCD_CONTRAST /* Main LCD contrast range and defaults */ #define MIN_CONTRAST_SETTING 0 #define MAX_CONTRAST_SETTING 63 #define DEFAULT_CONTRAST_SETTING 47 /* Match boot contrast */ /* Define this for LCD backlight brightness available */ #define HAVE_BACKLIGHT_BRIGHTNESS /* Main LCD backlight brightness range and defaults */ #define MIN_BRIGHTNESS_SETTING 1 #define MAX_BRIGHTNESS_SETTING 24 #define DEFAULT_BRIGHTNESS_SETTING 12 /* Implementation-defined fading type with bool settings */ #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET #define HAVE_HEADPHONE_DETECTION #endif /* BOOTLOADER */ #define CONFIG_CPU IMX31L /* Define this if you want to use imx31l's i2c interface */ #define CONFIG_I2C I2C_IMX31L /* Define the bitmask of modules used */ #define SPI_MODULE_MASK (USE_CSPI2_MODULE | USE_CSPI3_MODULE) #define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE) #define GPIO_EVENT_MASK (USE_GPIO1_EVENTS) /* Define this if target has an additional number of threads specific to it */ #define TARGET_EXTRA_THREADS 1 /* Type of mobile power - check this out */ #define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */ #define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ #define BATTERY_CAPACITY_INC 25 /* capacity increment */ #define BATTERY_TYPES_COUNT 1 /* only one type */ #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE /* TODO: have a proper status displayed in the bootloader and have it * work! */ /* Charging implemented in a target-specific algorithm */ #define CONFIG_CHARGING CHARGING_TARGET #define HAVE_USB_CHARGING_ENABLE /* define this if the hardware can be powered off while charging */ /* We don't charge while powered down so maybe implement a finish-charging-and-then-poweroff mode */ #define HAVE_POWEROFF_WHILE_CHARGING /* The size of the flash ROM */ #define FLASH_SIZE 0x200000 /* Define this to the CPU frequency */ #define CPU_FREQ 264000000 /* Set by retailOS loader */ #define FREQ cpu_frequency /* Button that exposures boot partition rather than data during session */ #define USB_BL_INSTALL_MODE_BTN BUTTON_VOL_DOWN /* define this if the unit can be powered or charged via USB */ #define HAVE_USB_POWER #define USBPOWER_BUTTON BUTTON_MENU #ifndef BOOTLOADER #define USBPOWER_BTN_IGNORE USB_BL_INSTALL_MODE_BTN #else /* Disable charging-only mode detection in bootloader */ #define USBPOWER_BTN_IGNORE (BUTTON_MAIN | BUTTON_REMOTE) #endif /* define this if the unit has a battery switch or battery can be removed * when running */ #define HAVE_BATTERY_SWITCH /* USB On-the-go */ #define CONFIG_USBOTG USBOTG_ARC /* enable these for the usb stack */ #define HAVE_USBSTACK /* usb stack and driver settings */ #define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI #define USB_VENDOR_ID 0x0930 #define USB_PRODUCT_ID 0x0010 #define HAVE_USB_HID_MOUSE #ifdef BOOTLOADER /* enable bootloader USB mode - ONLY define when also BOOTLOADER */ #define HAVE_BOOTLOADER_USB_MODE #endif /* Define this if you have ATA power-off control */ #define HAVE_ATA_POWER_OFF /* Define this to add support for ATA DMA */ #define HAVE_ATA_DMA #define CONFIG_LCD LCD_GIGABEATS /* Offset ( in the firmware file's header ) to the file CRC */ #define FIRMWARE_OFFSET_FILE_CRC 0 /* Offset ( in the firmware file's header ) to the real data */ #define FIRMWARE_OFFSET_FILE_DATA 8 //#define HAVE_SERIAL #define HAVE_VOLUME_IN_LIST /*Remove Comments from UART_INT to enable the UART interrupts,*/ /*otherwise iterrupts will be disabled. For now we will test */ /*UART state by polling the registers, and if necessary update this */ /*method by using the interrupts instead*/ //#define UART_INT /* Define this if you have adjustable CPU frequency */ /* #define HAVE_ADJUSTABLE_CPU_FREQ */ #define HAVE_PCM_DMA_ADDRESS #define HAVE_PCM_REC_DMA_ADDRESS #define BOOTFILE_EXT "gigabeat" #define BOOTFILE "rockbox." BOOTFILE_EXT #define BOOTDIR "/.rockbox" /* Define this if a programmable hotkey is mapped */ #define HAVE_HOTKEY