/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2002 by Daniel Stenberg * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #ifndef __CONFIG_H__ #define __CONFIG_H__ #include "autoconf.h" /* symbolic names for multiple choice configurations: */ /* CONFIG_STORAGE (note these are combineable bit-flags) */ #define STORAGE_ATA 0x01 #define STORAGE_MMC 0x02 #define STORAGE_SD 0x04 #define STORAGE_NAND 0x08 #define STORAGE_RAMDISK 0x10 #define STORAGE_HOSTFS 0x20 /* meant for APPLICATION targets (implicit for SIMULATOR) */ /* CONFIG_TUNER (note these are combineable bit-flags) */ #define S1A0903X01 0x01 /* Samsung */ #define TEA5767 0x02 /* Philips */ #define LV24020LP 0x04 /* Sanyo */ #define SI4700 0x08 /* Silicon Labs */ #define TEA5760 0x10 /* Philips */ #define LV240000 0x20 /* Sanyo */ #define IPOD_REMOTE_TUNER 0x40 /* Apple */ #define RDA5802 0x80 /* RDA Microelectronics */ #define STFM1000 0x100 /* Sigmatel */ /* CONFIG_CODEC */ #define MAS3587F 3587 #define MAS3507D 3507 #define MAS3539F 3539 #define SWCODEC 1 /* if codec is done by SW */ /* CONFIG_CPU */ #define SH7034 7034 #define MCF5249 5249 #define MCF5250 5250 #define PP5002 5002 #define PP5020 5020 #define PP5022 5022 #define PP5024 5024 #define PP6100 6100 #define PNX0101 101 #define S3C2440 2440 #define DSC25 25 #define DM320 320 #define IMX31L 31 #define TCC770 770 #define TCC771L 771 #define TCC773L 773 #define TCC7801 7801 #define S5L8700 8700 #define S5L8701 8701 #define S5L8702 8702 #define JZ4732 4732 #define AS3525 3525 #define AT91SAM9260 9260 #define AS3525v2 35252 #define IMX233 233 #define RK27XX 2700 /* platforms * bit fields to allow PLATFORM_HOSTED to be OR'ed e.g. with a * possible future PLATFORM_ANDROID (some OSes might need totally different * handling to run on them than a stand-alone application) */ #define PLATFORM_NATIVE (1<<0) #define PLATFORM_HOSTED (1<<1) #define PLATFORM_ANDROID (1<<2) #define PLATFORM_SDL (1<<3) #define PLATFORM_MAEMO4 (1<<4) #define PLATFORM_MAEMO5 (1<<5) #define PLATFORM_MAEMO (PLATFORM_MAEMO4|PLATFORM_MAEMO5) #define PLATFORM_PANDORA (1<<6) /* CONFIG_KEYPAD */ #define PLAYER_PAD 1 #define RECORDER_PAD 2 #define ONDIO_PAD 3 #define IRIVER_H100_PAD 4 #define IRIVER_H300_PAD 5 #define IAUDIO_X5M5_PAD 6 #define IPOD_4G_PAD 7 #define IPOD_3G_PAD 8 #define IPOD_1G2G_PAD 9 #define IRIVER_IFP7XX_PAD 10 #define GIGABEAT_PAD 11 #define IRIVER_H10_PAD 12 #define SANSA_E200_PAD 13 #define SANSA_C200_PAD 14 #define TATUNG_TPJ1022_PAD 15 #define ARCHOS_AV300_PAD 16 #define MROBE100_PAD 17 #define MROBE500_PAD 18 #define GIGABEAT_S_PAD 19 #define LOGIK_DAX_PAD 20 #define IAUDIO67_PAD 21 #define COWON_D2_PAD 22 #define IAUDIO_M3_PAD 23 #define CREATIVEZVM_PAD 24 #define SANSA_M200_PAD 25 #define CREATIVEZV_PAD 26 #define PHILIPS_SA9200_PAD 27 #define SANSA_C100_PAD 28 #define PHILIPS_HDD1630_PAD 29 #define MEIZU_M6SL_PAD 30 #define ONDAVX747_PAD 31 #define ONDAVX767_PAD 32 #define MEIZU_M6SP_PAD 33 #define MEIZU_M3_PAD 34 #define SANSA_CLIP_PAD 35 #define SANSA_FUZE_PAD 36 #define LYRE_PROTO1_PAD 37 #define SAMSUNG_YH_PAD 38 #define ONDAVX777_PAD 39 #define SAMSUNG_YPS3_PAD 40 #define MINI2440_PAD 41 #define PHILIPS_HDD6330_PAD 42 #define PBELL_VIBE500_PAD 43 #define MPIO_HD200_PAD 44 #define ANDROID_PAD 45 #define SDL_PAD 46 #define MPIO_HD300_PAD 47 #define SANSA_FUZEPLUS_PAD 48 #define RK27XX_GENERIC_PAD 49 #define HM60X_PAD 50 #define HM801_PAD 51 #define SANSA_CONNECT_PAD 52 #define SAMSUNG_YPR0_PAD 53 #define CREATIVE_ZENXFI2_PAD 54 #define CREATIVE_ZENXFI3_PAD 55 #define MA_PAD 56 #define SONY_NWZ_PAD 57 #define CREATIVE_ZEN_PAD 58 #define SAMSUNG_YPZ5_PAD 59 #define IHIFI_PAD 60 #define SAMSUNG_YPR1_PAD 61 /* CONFIG_REMOTE_KEYPAD */ #define H100_REMOTE 1 #define H300_REMOTE 2 #define IAUDIO_REMOTE 3 #define MROBE_REMOTE 4 /* CONFIG_BACKLIGHT_FADING */ /* No fading capabilities at all (yet) */ #define BACKLIGHT_NO_FADING 0x0 /* Backlight fading is controlled using a hardware PWM mechanism */ #define BACKLIGHT_FADING_PWM 0x1 /* Backlight is controlled using a software implementation * BACKLIGHT_FADING_SW_SETTING means that backlight is turned on by only setting * the brightness (i.e. no real difference between backlight_on and * backlight_set_brightness) * BACKLIGHT_FADING_SW_HW_REG means that backlight brightness is restored * "in hardware", from a hardware register upon backlight_on * Both types need to have minor adjustments in the software fading code */ #define BACKLIGHT_FADING_SW_SETTING 0x2 #define BACKLIGHT_FADING_SW_HW_REG 0x4 /* Backlight fading is done in a target specific way * for example in hardware, but not controllable*/ #define BACKLIGHT_FADING_TARGET 0x8 /* CONFIG_CHARGING */ /* Generic types */ #define CHARGING_SIMPLE 1 /* Simple, hardware controlled charging * (CPU cannot read charger state but may read * when power is plugged-in). */ #define CHARGING_MONITOR 2 /* Hardware controlled charging with monitoring * (CPU is able to read HW charging state and * when power is plugged-in). */ /* Mostly target-specific code in the /target tree */ #define CHARGING_TARGET 3 /* Any algorithm - usually software controlled * charging or specific programming is required to * use the charging hardware. */ /* CONFIG_BATTERY_MEASURE bits */ #define VOLTAGE_MEASURE 1 /* Target can report battery voltage * Usually native ports */ #define PERCENTAGE_MEASURE 2 /* Target can report remaining capacity in % * Usually application/hosted ports */ #define TIME_MEASURE 4 /* Target can report remaining time estimation Usually application ports, and only if the estimation is better that ours (which it probably is) */ /* CONFIG_LCD */ #define LCD_SSD1815 1 /* as used by Archos Recorders and Ondios */ #define LCD_SSD1801 2 /* as used by Archos Player/Studio */ #define LCD_S1D15E06 3 /* as used by iRiver H100 series */ #define LCD_H300 4 /* as used by iRiver H300 series, exact model name is unknown at the time of this writing */ #define LCD_X5 5 /* as used by iAudio X5 series, exact model name is unknown at the time of this writing */ #define LCD_IPODCOLOR 6 /* as used by iPod Color/Photo */ #define LCD_IPODNANO 7 /* as used by iPod Nano */ #define LCD_IPODVIDEO 8 /* as used by iPod Video */ #define LCD_IPOD2BPP 9 /* as used by all fullsize greyscale iPods */ #define LCD_IPODMINI 10 /* as used by iPod Mini g1/g2 */ #define LCD_IFP7XX 11 /* as used by iRiver iFP 7xx/8xx */ #define LCD_GIGABEAT 12 #define LCD_H10_20GB 13 /* as used by iriver H10 20Gb */ #define LCD_H10_5GB 14 /* as used by iriver H10 5Gb */ #define LCD_TPJ1022 15 /* as used by Tatung Elio TPJ-1022 */ #define LCD_DSC25 16 /* as used by Archos AV300 */ #define LCD_C200 17 /* as used by Sandisk Sansa c200 */ #define LCD_MROBE500 18 /* as used by Olympus M:Robe 500i */ #define LCD_MROBE100 19 /* as used by Olympus M:Robe 100 */ #define LCD_LOGIKDAX 20 /* as used by Logik DAX - SSD1815 */ #define LCD_IAUDIO67 21 /* as used by iAudio 6/7 - unknown */ #define LCD_CREATIVEZVM 22 /* as used by Creative Zen Vision:M */ #define LCD_TL0350A 23 /* as used by the iAudio M3 remote, treated as main LCD */ #define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */ #define LCD_SA9200 25 /* as used by the Philips SA9200 */ #define LCD_S6B33B2 26 /* as used by the Sansa c100 */ #define LCD_HDD1630 27 /* as used by the Philips HDD1630 */ #define LCD_MEIZUM6 28 /* as used by the Meizu M6SP and M6SL (various models) */ #define LCD_ONDAVX747 29 /* as used by the Onda VX747 */ #define LCD_ONDAVX767 30 /* as used by the Onda VX767 */ #define LCD_SSD1303 31 /* as used by the Sansa Clip */ #define LCD_FUZE 32 /* as used by the Sansa Fuze */ #define LCD_LYRE_PROTO1 33 /* as used by the Lyre prototype 1 */ #define LCD_YH925 34 /* as used by Samsung YH-925 (similar to the H10 20GB) */ #define LCD_VIEW 35 /* as used by the Sansa View */ #define LCD_NANO2G 36 /* as used by the iPod Nano 2nd Generation */ #define LCD_MINI2440 37 /* as used by the Mini2440 */ #define LCD_HDD6330 38 /* as used by the Philips HDD6330 */ #define LCD_VIBE500 39 /* as used by the Packard Bell Vibe 500 */ #define LCD_IPOD6G 40 /* as used by the iPod Nano 2nd Generation */ #define LCD_FUZEPLUS 41 #define LCD_SPFD5420A 42 /* rk27xx */ #define LCD_CLIPZIP 43 /* as used by the Sandisk Sansa Clip Zip */ #define LCD_HX8340B 44 /* as used by the HiFiMAN HM-601/HM-602/HM-801 */ #define LCD_CONNECT 45 /* as used by the Sandisk Sansa Connect */ #define LCD_GIGABEATS 46 #define LCD_YPR0 47 #define LCD_CREATIVEZXFI2 48 /* as used by the Creative Zen X-Fi2 */ #define LCD_CREATIVEZXFI3 49 /* as used by the Creative Zen X-Fi3 */ #define LCD_ILI9342 50 /* as used by HiFi E.T MA9/MA8 */ #define LCD_NWZE370 51 /* as used by Sony NWZ-E370 series */ #define LCD_NWZE360 52 /* as used by Sony NWZ-E360 series */ #define LCD_CREATIVEZEN 55 /* as used by the Creative ZEN (X-Fi) (LMS250GF03-001(S6D0139)) */ #define LCD_CREATIVEZENMOZAIC 56 /* as used by the Creative ZEN Mozaic (FGD0801) */ #define LCD_ILI9342C 57 /* another type of lcd used by HiFi E.T MA9/MA8 */ #define LCD_CREATIVEZENV 58 /* as used by the Creative Zen V (Plus) */ #define LCD_SAMSUNGYPZ5 59 /* as used by Samsung YP-Z5 */ #define LCD_IHIFI 60 /* as used by IHIFI 760/960 */ #define LCD_CREATIVEZENXFISTYLE 61 /* as used by Creative Zen X-Fi Style */ #define LCD_SAMSUNGYPR1 62 /* as used by Samsung YP-R1 */ /* LCD_PIXELFORMAT */ #define HORIZONTAL_PACKING 1 #define VERTICAL_PACKING 2 #define HORIZONTAL_INTERLEAVED 3 #define VERTICAL_INTERLEAVED 4 #define RGB565 565 #define RGB565SWAPPED 3553 /* LCD_STRIDEFORMAT */ #define VERTICAL_STRIDE 1 #define HORIZONTAL_STRIDE 2 /* CONFIG_ORIENTATION */ #define SCREEN_PORTRAIT 0 #define SCREEN_LANDSCAPE 1 #define SCREEN_SQUARE 2 /* CONFIG_I2C */ #define I2C_NONE 0 /* For targets that do not use I2C - as the Lyre prototype 1 */ #define I2C_PLAYREC 1 /* Archos Player/Recorder style */ #define I2C_ONDIO 2 /* Ondio style */ #define I2C_COLDFIRE 3 /* Coldfire style */ #define I2C_PP5002 4 /* PP5002 style */ #define I2C_PP5020 5 /* PP5020 style */ #define I2C_PNX0101 6 /* PNX0101 style */ #define I2C_S3C2440 7 #define I2C_PP5024 8 /* PP5024 style */ #define I2C_IMX31L 9 #define I2C_TCC77X 10 #define I2C_TCC780X 11 #define I2C_DM320 12 /* DM320 style */ #define I2C_S5L8700 13 #define I2C_JZ47XX 14 /* Ingenic Jz47XX style */ #define I2C_AS3525 15 #define I2C_S5L8702 16 /* Same as S5L8700, but with two channels */ #define I2C_IMX233 17 #define I2C_RK27XX 18 /* CONFIG_LED */ #define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */ #define LED_VIRTUAL 2 /* Virtual LED (icon) (Archos Ondio) */ /* else HW controlled LED (iRiver H1x0) */ /* CONFIG_NAND */ #define NAND_IFP7XX 1 #define NAND_TCC 2 #define NAND_SAMSUNG 3 #define NAND_CC 4 /* ChinaChip */ #define NAND_RK27XX 5 #define NAND_IMX233 6 /* CONFIG_RTC */ #define RTC_M41ST84W 1 /* Archos Recorder */ #define RTC_PCF50605 2 /* iPod 3G, 4G & Mini */ #define RTC_PCF50606 3 /* iriver H300 */ #define RTC_S3C2440 4 #define RTC_E8564 5 /* iriver H10 */ #define RTC_AS3514 6 /* Sandisk Sansa series */ #define RTC_DS1339_DS3231 7 /* h1x0 RTC mod */ #define RTC_IMX31L 8 #define RTC_RX5X348AB 9 #define RTC_TCC77X 10 #define RTC_TCC780X 11 #define RTC_MR100 12 #define RTC_MC13783 13 /* Freescale MC13783 PMIC */ #define RTC_S5L8700 14 #define RTC_S35390A 15 #define RTC_JZ47XX 16 /* Ingenic Jz47XX */ #define RTC_NANO2G 17 /* This seems to be a PCF5063x */ #define RTC_D2 18 /* Either PCF50606 or PCF50635 */ #define RTC_S35380A 19 #define RTC_IMX233 20 #define RTC_STM41T62 21 /* ST M41T62 */ /* USB On-the-go */ #define USBOTG_M66591 6591 /* M:Robe 500 */ #define USBOTG_ISP1362 1362 /* iriver H300 */ #define USBOTG_ISP1583 1583 /* Creative Zen Vision:M */ #define USBOTG_M5636 5636 /* iAudio X5 */ #define USBOTG_ARC 5020 /* PortalPlayer 502x and IMX233 */ #define USBOTG_JZ4740 4740 /* Ingenic Jz4740/Jz4732 */ #define USBOTG_AS3525 3525 /* AMS AS3525 */ #define USBOTG_S3C6400X 6400 /* Samsung S3C6400X, also used in the S5L8701/S5L8702/S5L8720 */ #define USBOTG_RK27XX 2700 /* Rockchip rk27xx */ #define USBOTG_TNETV105 105 /* TI TNETV105 */ /* Multiple cores */ #define CPU 0 #define COP 1 /* imx233 specific: IMX233_PACKAGE */ #define IMX233_BGA100 0 #define IMX233_BGA169 1 #define IMX233_TQFP100 2 #define IMX233_TQFP128 3 #define IMX233_LQFP100 4 /* IMX233_PARTITIONS */ #define IMX233_FREESCALE (1 << 0) /* Freescale I.MX233 nonstandard two-level MBR */ #define IMX233_CREATIVE (1 << 1) /* Creative MBLK windowing */ /* now go and pick yours */ #if defined(ARCHOS_PLAYER) #include "config/archosplayer.h" #elif defined(ARCHOS_RECORDER) #include "config/archosrecorder.h" #elif defined(ARCHOS_FMRECORDER) #include "config/archosfmrecorder.h" #elif defined(ARCHOS_RECORDERV2) #include "config/archosrecorderv2.h" #elif defined(ARCHOS_ONDIOSP) #include "config/archosondiosp.h" #elif defined(ARCHOS_ONDIOFM) #include "config/archosondiofm.h" #elif defined(ARCHOS_AV300) #include "config/archosav300.h" #elif defined(IRIVER_H100) #include "config/iriverh100.h" #elif defined(IRIVER_H120) #include "config/iriverh120.h" #elif defined(IRIVER_H300) #include "config/iriverh300.h" #elif defined(IAUDIO_X5) #include "config/iaudiox5.h" #elif defined(IAUDIO_M5) #include "config/iaudiom5.h" #elif defined(IAUDIO_M3) #include "config/iaudiom3.h" #elif defined(IPOD_COLOR) #include "config/ipodcolor.h" #elif defined(IPOD_NANO) #include "config/ipodnano1g.h" #elif defined(IPOD_VIDEO) #include "config/ipodvideo.h" #elif defined(IPOD_1G2G) #include "config/ipod1g2g.h" #elif defined(IPOD_3G) #include "config/ipod3g.h" #elif defined(IPOD_4G) #include "config/ipod4g.h" #elif defined(IPOD_NANO2G) #include "config/ipodnano2g.h" #elif defined(IPOD_6G) #include "config/ipod6g.h" #elif defined(IRIVER_IFP7XX) #include "config/iriverifp7xx.h" #elif defined(GIGABEAT_F) #include "config/gigabeatfx.h" #elif defined(GIGABEAT_S) #include "config/gigabeats.h" #elif defined(IPOD_MINI) #include "config/ipodmini1g.h" #elif defined(IPOD_MINI2G) #include "config/ipodmini2g.h" #elif defined(IRIVER_H10) #include "config/iriverh10.h" #elif defined(IRIVER_H10_5GB) #include "config/iriverh10_5gb.h" #elif defined(SANSA_E200) #include "config/sansae200.h" #elif defined(SANSA_C200) #include "config/sansac200.h" #elif defined(SANSA_M200) #include "config/sansam200.h" #elif defined(TATUNG_TPJ1022) #include "config/tatungtpj1022.h" #elif defined(MROBE_100) #include "config/mrobe100.h" #elif defined(MROBE_500) #include "config/mrobe500.h" #elif defined(LOGIK_DAX) #include "config/logikdax.h" #elif defined(IAUDIO_7) #include "config/iaudio7.h" #elif defined(COWON_D2) #include "config/cowond2.h" #elif defined(CREATIVE_ZVM) #include "config/zenvisionm30gb.h" #elif defined(CREATIVE_ZVM60GB) #include "config/zenvisionm60gb.h" #elif defined(CREATIVE_ZV) #include "config/zenvision.h" #elif defined(CREATIVE_ZENXFI2) #include "config/creativezenxfi2.h" #elif defined(CREATIVE_ZENXFI3) #include "config/creativezenxfi3.h" #elif defined(PHILIPS_SA9200) #include "config/gogearsa9200.h" #elif defined(PHILIPS_HDD1630) #include "config/gogearhdd1630.h" #elif defined(PHILIPS_HDD6330) #include "config/gogearhdd6330.h" #elif defined(SANSA_C100) #include "config/sansac100.h" #elif defined(MEIZU_M6SL) #include "config/meizum6sl.h" #elif defined(MEIZU_M6SP) #include "config/meizum6sp.h" #elif defined(MEIZU_M3) #include "config/meizum3.h" #elif defined(ONDA_VX747) || defined(ONDA_VX747P) #include "config/ondavx747.h" #elif defined(ONDA_VX777) #include "config/ondavx777.h" #elif defined(ONDA_VX767) #include "config/ondavx767.h" #elif defined(SANSA_CLIP) #include "config/sansaclip.h" #elif defined(SANSA_CLIPV2) #include "config/sansaclipv2.h" #elif defined(SANSA_CLIPPLUS) #include "config/sansaclipplus.h" #elif defined(SANSA_E200V2) #include "config/sansae200v2.h" #elif defined(SANSA_M200V4) #include "config/sansam200v4.h" #elif defined(SANSA_FUZE) #include "config/sansafuze.h" #elif defined(SANSA_FUZEV2) #include "config/sansafuzev2.h" #elif defined(SANSA_FUZEPLUS) #include "config/sansafuzeplus.h" #elif defined(SANSA_CLIPZIP) #include "config/sansaclipzip.h" #elif defined(SANSA_C200V2) #include "config/sansac200v2.h" #elif defined(SANSA_VIEW) #include "config/sansaview.h" #elif defined(LYRE_PROTO1) #include "config/lyreproto1.h" #elif defined(MINI2440) #include "config/mini2440.h" #elif defined(SAMSUNG_YH820) #include "config/samsungyh820.h" #elif defined(SAMSUNG_YH920) #include "config/samsungyh920.h" #elif defined(SAMSUNG_YH925) #include "config/samsungyh925.h" #elif defined(SAMSUNG_YPS3) #include "config/samsungyps3.h" #elif defined(PBELL_VIBE500) #include "config/vibe500.h" #elif defined(MPIO_HD200) #include "config/mpiohd200.h" #elif defined(MPIO_HD300) #include "config/mpiohd300.h" #elif defined(RK27_GENERIC) #include "config/rk27generic.h" #elif defined(HM60X) #include "config/hifimanhm60x.h" #elif defined(HM801) #include "config/hifimanhm801.h" #elif defined(SANSA_CONNECT) #include "config/sansaconnect.h" #elif defined(SDLAPP) #include "config/sdlapp.h" #elif defined(ANDROID) #include "config/android.h" #elif defined(NOKIAN8XX) #include "config/nokian8xx.h" #elif defined(NOKIAN900) #include "config/nokian900.h" #elif defined(PANDORA) #include "config/pandora.h" #elif defined(SAMSUNG_YPR0) #include "config/samsungypr0.h" #elif defined(CREATIVE_ZENXFI) #include "config/creativezenxfi.h" #elif defined(CREATIVE_ZENMOZAIC) #include "config/creativezenmozaic.h" #elif defined(CREATIVE_ZEN) #include "config/creativezen.h" #elif defined(CREATIVE_ZENV) #include "config/creativezenv.h" #elif defined(MA9) #include "config/hifietma9.h" #elif defined(MA9C) #include "config/hifietma9c.h" #elif defined(MA8) #include "config/hifietma8.h" #elif defined(MA8C) #include "config/hifietma8c.h" #elif defined(SONY_NWZE370) #include "config/sonynwze370.h" #elif defined(SONY_NWZE360) #include "config/sonynwze360.h" #elif defined(SAMSUNG_YPZ5) #include "config/samsungypz5.h" #elif defined(IHIFI760) #include "config/ihifi760.h" #elif defined(IHIFI960) #include "config/ihifi960.h" #elif defined(CREATIVE_ZENXFISTYLE) #include "config/creativezenxfistyle.h" #elif defined(SAMSUNG_YPR1) #include "config/samsungypr1.h" #else /* no known platform */ #endif #ifdef __PCTOOL__ #undef CONFIG_CPU #define CONFIG_CPU 0 #endif #ifdef APPLICATION #define CONFIG_CPU 0 #endif /* keep this include after the target configs */ #ifdef SIMULATOR #include "config/sim.h" #endif #ifndef CONFIG_PLATFORM #define CONFIG_PLATFORM PLATFORM_NATIVE #endif /* setup basic macros from capability masks */ #include "config_caps.h" /* setup CPU-specific defines */ #ifndef __PCTOOL__ /* define for all cpus from SH family */ #if (ARCH == ARCH_SH) && (CONFIG_CPU == SH7034) #define CPU_SH #endif /* define for all cpus from coldfire family */ #if (ARCH == ARCH_M68K) && ((CONFIG_CPU == MCF5249) || (CONFIG_CPU == MCF5250)) #define CPU_COLDFIRE #endif /* define for all cpus from PP family */ #if (CONFIG_CPU == PP5002) #define CPU_PP #elif (CONFIG_CPU == PP5020) || (CONFIG_CPU == PP5022) \ || (CONFIG_CPU == PP5024) || (CONFIG_CPU == PP6100) #define CPU_PP #define CPU_PP502x #endif /* define for all cpus from S5L870X family */ #if (CONFIG_CPU == S5L8700) || (CONFIG_CPU == S5L8701) || (CONFIG_CPU == S5L8702) #define CPU_S5L870X #endif /* define for all cpus from TCC77X family */ #if (CONFIG_CPU == TCC771L) || (CONFIG_CPU == TCC773L) || (CONFIG_CPU == TCC770) #define CPU_TCC77X #endif /* define for all cpus from TCC780 family */ #if (CONFIG_CPU == TCC7801) #define CPU_TCC780X #endif /* define for all cpus from ARM7TDMI family (for specific optimisations) */ #if defined(CPU_PP) || (CONFIG_CPU == PNX0101) || (CONFIG_CPU == DSC25) #define CPU_ARM7TDMI #endif /* define for all cpus from ARM family */ #if ARCH == ARCH_ARM #define CPU_ARM #define ARM_ARCH ARCH_VERSION /* ARMv{4,5,6,7} */ #endif #if ARCH == ARCH_MIPS #define CPU_MIPS ARCH_VERSION /* 32, 64 */ #endif #endif /*__PCTOOL__*/ /* now set any CONFIG_ defines correctly if they are not used, No need to do this on CONFIG_'s which are compulsory (e.g CONFIG_CODEC ) */ #if !defined(CONFIG_BACKLIGHT_FADING) #define CONFIG_BACKLIGHT_FADING BACKLIGHT_NO_FADING #endif #ifndef CONFIG_I2C #define CONFIG_I2C I2C_NONE #endif #ifndef CONFIG_TUNER #define CONFIG_TUNER 0 #endif #ifndef CONFIG_USBOTG #define CONFIG_USBOTG 0 #endif #ifndef CONFIG_LED #define CONFIG_LED LED_VIRTUAL #endif #ifndef CONFIG_CHARGING #define CONFIG_CHARGING 0 #endif #ifndef CONFIG_BATTERY_MEASURE #define CONFIG_BATTERY_MEASURE 0 #define NO_LOW_BATTERY_SHUTDOWN #endif #ifndef CONFIG_RTC #define CONFIG_RTC 0 #endif #ifndef BATTERY_TYPES_COUNT #define BATTERY_TYPES_COUNT 0 #endif #ifndef BATTERY_CAPACITY_DEFAULT #define BATTERY_CAPACITY_DEFAULT 0 #endif #ifndef BATTERY_CAPACITY_INC #define BATTERY_CAPACITY_INC 0 #endif #ifndef CONFIG_ORIENTATION #if LCD_HEIGHT > LCD_WIDTH #define CONFIG_ORIENTATION SCREEN_PORTRAIT #elif LCD_HEIGHT < LCD_WIDTH #define CONFIG_ORIENTATION SCREEN_LANDSCAPE #else #define CONFIG_ORIENTATION SCREEN_SQUARE #endif #endif /* Pixel aspect ratio is defined in terms of a multiplier for pixel width and * height, and is set to 1:1 if the target does not set a value */ #ifndef LCD_PIXEL_ASPECT_HEIGHT #define LCD_PIXEL_ASPECT_HEIGHT 1 #endif #ifndef LCD_PIXEL_ASPECT_WIDTH #define LCD_PIXEL_ASPECT_WIDTH 1 #endif /* Used for split displays (Sansa Clip). Set to 0 otherwise */ #ifndef LCD_SPLIT_LINES #define LCD_SPLIT_LINES 0 #endif /* Simulator LCD dimensions. Set to standard dimensions if undefined */ #ifndef SIM_LCD_WIDTH #define SIM_LCD_WIDTH LCD_WIDTH #endif #ifndef SIM_LCD_HEIGHT #define SIM_LCD_HEIGHT (LCD_HEIGHT + LCD_SPLIT_LINES) #endif #ifdef HAVE_REMOTE_LCD #ifndef SIM_REMOTE_WIDTH #define SIM_REMOTE_WIDTH LCD_REMOTE_WIDTH #endif #ifndef SIM_REMOTE_HEIGHT #define SIM_REMOTE_HEIGHT LCD_REMOTE_HEIGHT #endif #endif /* HAVE_REMOTE_LCD */ /* define this in the target config.h to use a different size */ #ifndef CONFIG_DEFAULT_ICON_HEIGHT #define CONFIG_DEFAULT_ICON_HEIGHT 8 #endif #ifndef CONFIG_DEFAULT_ICON_WIDTH #define CONFIG_DEFAULT_ICON_WIDTH 6 #endif #ifndef CONFIG_REMOTE_DEFAULT_ICON_HEIGHT #define CONFIG_REMOTE_DEFAULT_ICON_HEIGHT 8 #endif #ifndef CONFIG_REMOTE_DEFAULT_ICON_WIDTH #define CONFIG_REMOTE_DEFAULT_ICON_WIDTH 6 #endif #if LCD_DEPTH > 1 || defined(HAVE_REMOTE_LCD) && LCD_REMOTE_DEPTH > 1 #define HAVE_BACKDROP_IMAGE #endif #if (CONFIG_TUNER & (CONFIG_TUNER - 1)) != 0 /* Multiple possible tuners */ #define CONFIG_TUNER_MULTI #endif /* deactivate fading in bootloader */ #if defined(BOOTLOADER) #undef CONFIG_BACKLIGHT_FADING #define CONFIG_BACKLIGHT_FADING BACKLIGHT_NO_FADING #endif /* determine which setting/manual text to use */ #if (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_PWM) /* possibly overridden in target config */ #if !defined(HAVE_BACKLIGHT_FADING_BOOL_SETTING) \ && !defined(HAVE_BACKLIGHT_FADING_INT_SETTING) #define HAVE_BACKLIGHT_FADING_INT_SETTING #endif #elif (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_SETTING) \ || (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_HW_REG) \ || (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_TARGET) /* possibly overridden in target config */ #if !defined(HAVE_BACKLIGHT_FADING_BOOL_SETTING) \ && !defined(HAVE_BACKLIGHT_FADING_INT_SETTING) #define HAVE_BACKLIGHT_FADING_BOOL_SETTING #endif #endif /* CONFIG_BACKLIGHT_FADING */ /* Storage related config handling */ #if (CONFIG_STORAGE & (CONFIG_STORAGE - 1)) != 0 /* Multiple storage drivers */ #define CONFIG_STORAGE_MULTI #endif /* Explicit HAVE_MULTIVOLUME in the config file. Allow the maximum number */ #ifdef HAVE_MULTIVOLUME #define NUM_VOLUMES_PER_DRIVE 4 #else #define NUM_VOLUMES_PER_DRIVE 1 #endif #if defined(CONFIG_STORAGE_MULTI) && !defined(HAVE_MULTIDRIVE) #define HAVE_MULTIDRIVE #endif #if defined(HAVE_MULTIDRIVE) && !defined(HAVE_MULTIVOLUME) #define HAVE_MULTIVOLUME #endif #if defined(HAVE_MULTIDRIVE) && !defined(NUM_DRIVES) #error HAVE_MULTIDRIVE needs to have an explicit NUM_DRIVES #endif #ifndef NUM_DRIVES #define NUM_DRIVES 1 #endif #define NUM_VOLUMES (NUM_DRIVES * NUM_VOLUMES_PER_DRIVE) #if defined(BOOTLOADER) && defined(HAVE_ADJUSTABLE_CPU_FREQ) /* Bootloaders don't use CPU frequency adjustment */ #undef HAVE_ADJUSTABLE_CPU_FREQ #endif #if defined(__PCTOOL__) && defined(HAVE_ADJUSTABLE_CPU_FREQ) /* PCTOOLs don't use CPU frequency adjustment */ #undef HAVE_ADJUSTABLE_CPU_FREQ #endif /* Enable the directory cache and tagcache in RAM if we have * plenty of RAM. Both features can be enabled independently. */ #if (MEMORYSIZE >= 8) && !defined(BOOTLOADER) && !defined(__PCTOOL__) \ && !defined(APPLICATION) #define HAVE_DIRCACHE #ifdef HAVE_TAGCACHE #define HAVE_TC_RAMCACHE #endif #endif #if defined(HAVE_TAGCACHE) && defined(HAVE_LCD_BITMAP) #define HAVE_PICTUREFLOW_INTEGRATION #endif /* Add one HAVE_ define for all mas35xx targets */ #if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3507D) || (CONFIG_CODEC == MAS3539F) #define HAVE_MAS35XX #endif #if (CONFIG_CODEC == SWCODEC) #ifdef BOOTLOADER #ifdef HAVE_BOOTLOADER_USB_MODE /* Priority in bootloader is wanted */ #define HAVE_PRIORITY_SCHEDULING #define USB_STATUS_BY_EVENT #define USB_DETECT_BY_REQUEST #if defined(HAVE_USBSTACK) && CONFIG_USBOTG == USBOTG_ARC #define INCLUDE_TIMEOUT_API #define USB_DRIVER_CLOSE #endif #endif #else /* !BOOTLOADER */ #define HAVE_EXTENDED_MESSAGING_AND_NAME #define HAVE_WAKEUP_EXT_CB #if defined(ASSEMBLER_THREADS) \ || defined(HAVE_WIN32_FIBER_THREADS) \ || defined(HAVE_SIGALTSTACK_THREADS) #define HAVE_PRIORITY_SCHEDULING #endif #if (CONFIG_PLATFORM & PLATFORM_NATIVE) #define HAVE_PRIORITY_SCHEDULING #define HAVE_SCHEDULER_BOOSTCTRL #endif /* PLATFORM_NATIVE */ #ifdef HAVE_USBSTACK #if CONFIG_USBOTG == USBOTG_ARC #define USB_STATUS_BY_EVENT #define USB_DETECT_BY_REQUEST #define INCLUDE_TIMEOUT_API #elif CONFIG_USBOTG == USBOTG_AS3525 #define USB_STATUS_BY_EVENT #define USB_DETECT_BY_REQUEST #elif CONFIG_USBOTG == USBOTG_S3C6400X /* FIXME */ && CONFIG_CPU == AS3525v2 #define USB_STATUS_BY_EVENT #define USB_DETECT_BY_REQUEST #elif CONFIG_USBOTG == USBOTG_RK27XX #define USB_STATUS_BY_EVENT #define USB_DETECT_BY_REQUEST #endif /* CONFIG_USB == */ #endif /* HAVE_USBSTACK */ #endif /* BOOTLOADER */ #if defined(HAVE_USBSTACK) || (CONFIG_CPU == JZ4732) \ || (CONFIG_CPU == AS3525) || (CONFIG_CPU == AS3525v2) \ || defined(CPU_S5L870X) || (CONFIG_CPU == S3C2440) \ || defined(APPLICATION) || (CONFIG_CPU == PP5002) \ || (CONFIG_CPU == RK27XX) || (CONFIG_CPU == IMX233) #define HAVE_SEMAPHORE_OBJECTS #endif /*include support for crossfading - requires significant PCM buffer space*/ #if MEMORYSIZE > 2 #define HAVE_CROSSFADE #endif #endif /* (CONFIG_CODEC == SWCODEC) */ /* Determine if accesses should be strictly long aligned. */ #if (CONFIG_CPU == SH7034) || defined(CPU_ARM) || defined(CPU_MIPS) #define ROCKBOX_STRICT_ALIGN 1 #endif #if defined(CPU_ARM) && defined(__ASSEMBLER__) /* ARMv4T doesn't switch the T bit when popping pc directly, we must use BX */ .macro ldmpc cond="", order="ia", regs #if ARM_ARCH == 4 && defined(USE_THUMB) ldm\cond\order sp!, { \regs, lr } bx\cond lr #else ldm\cond\order sp!, { \regs, pc } #endif .endm .macro ldrpc cond="" #if ARM_ARCH == 4 && defined(USE_THUMB) ldr\cond lr, [sp], #4 bx\cond lr #else ldr\cond pc, [sp], #4 #endif .endm #endif #if defined(CPU_COLDFIRE) && defined(__ASSEMBLER__) /* Assembler doesn't support these as mnemonics but does tpf */ .macro tpf.w .word 0x51fa .endm .macro tpf.l .word 0x51fb .endm #endif #ifndef CODEC_SIZE #define CODEC_SIZE 0 #endif /* This attribute can be used to ensure that certain symbols are never profiled * which can be important as profiling a function de-inlines it */ #ifdef RB_PROFILE #define NO_PROF_ATTR __attribute__ ((no_instrument_function)) #else #define NO_PROF_ATTR #endif /* IRAM usage */ #if (CONFIG_PLATFORM & PLATFORM_NATIVE) && /* Not for hosted environments */ \ (((CONFIG_CPU == SH7034) && !defined(PLUGIN)) || /* SH1 archos: core only */ \ defined(CPU_COLDFIRE) || /* Coldfire: core, plugins, codecs */ \ defined(CPU_PP) || /* PortalPlayer: core, plugins, codecs */ \ (CONFIG_CPU == AS3525 && MEMORYSIZE > 2 && !defined(BOOTLOADER)) || /* AS3525 +2MB: core, plugins, codecs */ \ (CONFIG_CPU == AS3525 && MEMORYSIZE <= 2 && !defined(PLUGIN) && !defined(CODEC) && !defined(BOOTLOADER)) || /* AS3525 2MB: core only */ \ (CONFIG_CPU == AS3525v2 && !defined(PLUGIN) && !defined(CODEC) && !defined(BOOTLOADER)) || /* AS3525v2: core only */ \ (CONFIG_CPU == PNX0101) || \ (CONFIG_CPU == TCC7801) || \ (CONFIG_CPU == IMX233 && !defined(PLUGIN) && !defined(CODEC)) || /* IMX233: core only */ \ defined(CPU_S5L870X)) || /* Samsung S5L8700: core, plugins, codecs */ \ (CONFIG_CPU == JZ4732 && !defined(PLUGIN) && !defined(CODEC)) /* Jz4740: core only */ #define ICODE_ATTR __attribute__ ((section(".icode"))) #define ICONST_ATTR __attribute__ ((section(".irodata"))) #define IDATA_ATTR __attribute__ ((section(".idata"))) #define IBSS_ATTR __attribute__ ((section(".ibss"))) #define USE_IRAM #if CONFIG_CPU != SH7034 && (CONFIG_CPU != AS3525 || MEMORYSIZE > 2) \ && CONFIG_CPU != JZ4732 && CONFIG_CPU != AS3525v2 && CONFIG_CPU != IMX233 #define PLUGIN_USE_IRAM #endif #else #define ICODE_ATTR #define ICONST_ATTR #define IDATA_ATTR #define IBSS_ATTR #endif #if (defined(CPU_PP) || (CONFIG_CPU == AS3525) || (CONFIG_CPU == AS3525v2) || \ (CONFIG_CPU == IMX31L) || (CONFIG_CPU == IMX233) || \ (CONFIG_CPU == RK27XX) || defined(CPU_COLDFIRE)) \ && (CONFIG_PLATFORM & PLATFORM_NATIVE) && !defined(BOOTLOADER) /* Functions that have INIT_ATTR attached are NOT guaranteed to survive after * root_menu() has been called. Their code may be overwritten by other data or * code in order to save RAM, and references to them might point into * zombie area. * * It is critical that you make sure these functions are only called before * the final call to root_menu() (see apps/main.c) is called (i.e. basically * only while main() runs), otherwise things may go wild, * from crashes to freezes to exploding daps. */ #define INIT_ATTR __attribute__ ((section(".init"))) #define INITDATA_ATTR __attribute__ ((section(".initdata"))) #define HAVE_INIT_ATTR #else #define INIT_ATTR #define INITDATA_ATTR #endif /* We need to call storage_init more than once only if USB storage mode is * handled in hardware: * Deinit storage -> let hardware handle USB mode -> storage_init() again */ #if defined(HAVE_USBSTACK) || defined(USB_NONE) #define STORAGE_INIT_ATTR INIT_ATTR #else #define STORAGE_INIT_ATTR #endif #if (CONFIG_PLATFORM & PLATFORM_HOSTED) && defined(__APPLE__) #define DATA_ATTR __attribute__ ((section("__DATA, .data"))) #else #define DATA_ATTR __attribute__ ((section(".data"))) #endif #ifndef IRAM_LCDFRAMEBUFFER /* if the LCD framebuffer has not been moved to IRAM, define it empty here */ #define IRAM_LCDFRAMEBUFFER #endif /* Change this if you want to build a single-core firmware for a multicore * target for debugging */ #if defined(BOOTLOADER) || (CONFIG_CPU == PP6100) #define FORCE_SINGLE_CORE #endif #if defined(CPU_PP) #define IDLE_STACK_SIZE 0x80 #define IDLE_STACK_WORDS 0x20 /* Attributes to place data in uncached DRAM */ /* These are useful beyond dual-core and ultimately beyond PP since they may * be used for DMA buffers and such without cache maintenence calls. */ #define NOCACHEBSS_ATTR __attribute__((section(".ncbss"),nocommon)) #define NOCACHEDATA_ATTR __attribute__((section(".ncdata"),nocommon)) #if !defined(FORCE_SINGLE_CORE) #define NUM_CORES 2 #define HAVE_CORELOCK_OBJECT #define CURRENT_CORE current_core() /* Attributes for core-shared data in DRAM where IRAM is better used for other * purposes. */ #define SHAREDBSS_ATTR NOCACHEBSS_ATTR #define SHAREDDATA_ATTR NOCACHEDATA_ATTR #define IF_COP(...) __VA_ARGS__ #define IF_COP_VOID(...) __VA_ARGS__ #define IF_COP_CORE(core) core #endif /* !defined(FORCE_SINGLE_CORE) */ #endif /* CPU_PP */ #if CONFIG_CPU == IMX31L || CONFIG_CPU == IMX233 #define NOCACHEBSS_ATTR __attribute__((section(".ncbss"),nocommon)) #define NOCACHEDATA_ATTR __attribute__((section(".ncdata"),nocommon)) #endif #ifndef NUM_CORES /* Default to single core */ #define NUM_CORES 1 #define CURRENT_CORE CPU /* Attributes for core-shared data in DRAM - no caching considerations */ #define SHAREDBSS_ATTR #define SHAREDDATA_ATTR #ifndef NOCACHEBSS_ATTR #define NOCACHEBSS_ATTR #define NOCACHEDATA_ATTR #endif #define IF_COP(...) #define IF_COP_VOID(...) void #define IF_COP_CORE(core) CURRENT_CORE #endif /* NUM_CORES */ #ifdef HAVE_HEADPHONE_DETECTION /* Timeout objects required if headphone detection is enabled */ #define INCLUDE_TIMEOUT_API #endif /* HAVE_HEADPHONE_DETECTION */ #ifdef HAVE_TOUCHSCREEN /* Timeout objects required for kinetic list scrolling */ #define INCLUDE_TIMEOUT_API /* Enable skin variable system, may not be the best place for this #define. */ #define HAVE_SKIN_VARIABLES #endif /* HAVE_TOUCHSCREEN */ #if defined(HAVE_USB_CHARGING_ENABLE) && defined(HAVE_USBSTACK) /* USB charging support in the USB stack requires timeout objects */ #define INCLUDE_TIMEOUT_API #endif /* HAVE_USB_CHARGING_ENABLE && HAVE_USBSTACK */ #if defined(HAVE_GUI_BOOST) && defined(HAVE_ADJUSTABLE_CPU_FREQ) /* Timeout objects required if GUI boost is enabled */ #define INCLUDE_TIMEOUT_API #endif /* HAVE_GUI_BOOST && HAVE_ADJUSTABLE_CPU_FREQ */ #ifndef SIMULATOR #if defined(HAVE_USBSTACK) || (CONFIG_STORAGE & STORAGE_NAND) #define STORAGE_GET_INFO #endif #endif #ifdef CPU_MIPS #include /* MIPS GCC fix? */ #endif #if defined(HAVE_USBSTACK) /* Define the implemented USB transport classes */ #if CONFIG_USBOTG == USBOTG_ISP1583 #define USB_HAS_BULK #elif (CONFIG_USBOTG == USBOTG_ARC) || \ (CONFIG_USBOTG == USBOTG_JZ4740) || \ (CONFIG_USBOTG == USBOTG_M66591) || \ (CONFIG_USBOTG == USBOTG_AS3525) #define USB_HAS_BULK #define USB_HAS_INTERRUPT #elif defined(CPU_TCC780X) || defined(CPU_TCC77X) #define USB_HAS_BULK #elif CONFIG_USBOTG == USBOTG_S3C6400X #define USB_HAS_BULK //#define USB_HAS_INTERRUPT -- seems to be broken #endif /* CONFIG_USBOTG */ #if (CONFIG_USBOTG == USBOTG_ARC) || \ (CONFIG_USBOTG == USBOTG_AS3525) #define USB_HAS_ISOCHRONOUS #endif /* define the class drivers to enable */ #ifdef BOOTLOADER /* enable usb storage for targets that do bootloader usb */ #if defined(HAVE_BOOTLOADER_USB_MODE) || \ defined(CREATIVE_ZVx) || defined(CPU_TCC77X) || defined(CPU_TCC780X) || \ CONFIG_USBOTG == USBOTG_JZ4740 || CONFIG_USBOTG == USBOTG_AS3525 || \ CONFIG_USBOTG == USBOTG_S3C6400X #define USB_ENABLE_STORAGE #endif #else /* BOOTLOADER */ #if (CONFIG_PLATFORM & PLATFORM_NATIVE) #ifdef USB_HAS_BULK //#define USB_ENABLE_SERIAL #ifdef USE_ROCKBOX_USB #define USB_ENABLE_STORAGE #endif /* USE_ROCKBOX_USB */ #endif /* USB_HAS_BULK */ #ifdef USB_HAS_INTERRUPT #define USB_ENABLE_HID #else #define USB_ENABLE_CHARGING_ONLY #endif #endif #endif /* BOOTLOADER */ #endif /* HAVE_USBSTACK */ /* This attribute can be used to enable to detection of plugin file handles leaks. * When enabled, the plugin core will monitor open/close/creat and when the plugin exits * will display an error message if the plugin leaked some file handles */ #if (CONFIG_PLATFORM & PLATFORM_NATIVE) #define HAVE_PLUGIN_CHECK_OPEN_CLOSE #endif #if defined(HAVE_DIRCACHE) && (CONFIG_PLATFORM & PLATFORM_NATIVE) #define HAVE_IO_PRIORITY #endif #if defined(CPU_COLDIRE) || CONFIG_CPU == IMX31L /* Can record and play simultaneously */ #define HAVE_PCM_FULL_DUPLEX #endif #if (CONFIG_CODEC == SWCODEC) || (CONFIG_CODEC == MAS3587F) || \ (CONFIG_CODEC == MAS3539F) #define HAVE_PITCHCONTROL #endif /* enable logging messages to disk*/ #if !defined(BOOTLOADER) && !defined(__PCTOOL__) && (CONFIG_CODEC == SWCODEC) #define ROCKBOX_HAS_LOGDISKF #endif #if defined(HAVE_SDL_AUDIO) \ && !(CONFIG_PLATFORM & PLATFORM_MAEMO5) \ && !defined(HAVE_SW_VOLUME_CONTROL) \ && CONFIG_CODEC == SWCODEC /* SW volume is needed for accurate control and no double buffering should be * required. If target uses SW volume, then its definitions are used instead * so things are as on target. */ #define HAVE_SW_VOLUME_CONTROL #define PCM_SW_VOLUME_UNBUFFERED /* pcm driver itself is buffered */ #ifdef SIMULATOR /* For sim, nice res for ~ -127dB..+36dB that so far covers all targets */ #define PCM_SW_VOLUME_FRACBITS (24) #else /* For app, use fractional-only setup for -79..+0, no large-integer math */ #define PCM_SW_VOLUME_FRACBITS (16) #endif /* SIMULATOR */ #endif /* default SDL SW volume conditions */ /* null audiohw setting macro for when codec header is included for reasons other than audio support */ #define AUDIOHW_SETTING(name, us, nd, st, minv, maxv, defv, expr...) #endif /* __CONFIG_H__ */