/* * (C) Copyright 2006 * Copyright (C) 2006 Austriamicrosystems, by thomas.luo * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __AS3525_H__ #define __AS3525_H__ #define CACHEALIGN_BITS (5) #define UART_CHANNELS 1 #if MEMORYSIZE <= 2 /* we put the codec buffer in IRAM */ #define AMS_LOWMEM #endif /* Virtual addresses */ /* Do not apply to the bootloader, which uses physical addresses (no MMU) */ #define DRAM_ORIG 0x30000000 #define IRAM_ORIG (DRAM_ORIG + DRAM_SIZE) /* IRAM is mapped just next to DRAM */ #define DRAM_SIZE (MEMORYSIZE * 0x100000) #define IRAM_SIZE 0x50000 /* AS352X only supports 512 Byte HW ECC */ #define ECCSIZE 512 #define ECCBYTES 3 /* AS352X MMU Page Table Entries */ #define TTB_SIZE 0x4000 #define TTB_BASE_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE) /* AS352X device base addresses */ /* ------------------------------------------------------------------------ * AS352X Registers * ------------------------------------------------------------------------ * */ /* AHB */ #define USB_BASE 0xC6000000 #define VIC_BASE 0xC6010000 #define DMAC_BASE 0xC6020000 #define MPMC_BASE 0xC6030000 #define MEMSTICK_BASE 0xC6040000 #define CF_IDE_BASE 0xC6050000 /* APB */ #define NAND_FLASH_BASE 0xC8000000 #define BIST_MANAGER_BASE 0xC8010000 #define SD_MCI_BASE 0xC8020000 #define TIMER_BASE 0xC8040000 #define WDT_BASE 0xC8050000 #define I2C_MS_BASE 0xC8060000 #define I2C_AUDIO_BASE 0xC8070000 #define SSP_BASE 0xC8080000 #define I2SIN_BASE 0xC8090000 #define I2SOUT_BASE 0xC80A0000 #define GPIOA_BASE 0xC80B0000 #define GPIOB_BASE 0xC80C0000 #define GPIOC_BASE 0xC80D0000 #define GPIOD_BASE 0xC80E0000 #define CGU_BASE 0xC80F0000 #define CCU_BASE 0xC8100000 #define UART0_BASE 0xC8110000 #define DBOP_BASE 0xC8120000 /* ------------------------------------------------------------------------ * AS352X control registers * ------------------------------------------------------------------------ */ #define CCU_SRC (*(volatile unsigned long *)(CCU_BASE + 0x00)) #define CCU_SRL (*(volatile unsigned long *)(CCU_BASE + 0x04)) #define CCU_MEMMAP (*(volatile unsigned long *)(CCU_BASE + 0x08)) #define CCU_IO (*(volatile unsigned long *)(CCU_BASE + 0x0C)) #define CCU_SCON (*(volatile unsigned long *)(CCU_BASE + 0x10)) #define CCU_VERS (*(volatile unsigned long *)(CCU_BASE + 0x14)) #define CCU_SPARE1 (*(volatile unsigned long *)(CCU_BASE + 0x18)) #define CCU_SPARE2 (*(volatile unsigned long *)(CCU_BASE + 0x1C)) /* DBOP */ #define DBOP_TIMPOL_01 (*(volatile unsigned long *)(DBOP_BASE + 0x00)) #define DBOP_TIMPOL_23 (*(volatile unsigned long *)(DBOP_BASE + 0x04)) #define DBOP_CTRL (*(volatile unsigned long *)(DBOP_BASE + 0x08)) #define DBOP_STAT (*(volatile unsigned long *)(DBOP_BASE + 0x0C)) /* default is 16bit, but we switch to 32bit for some targets for better speed */ #define DBOP_DOUT8 (*(volatile unsigned char*)(DBOP_BASE + 0x10)) #define DBOP_DOUT (*(volatile unsigned short*)(DBOP_BASE + 0x10)) #define DBOP_DOUT16 (*(volatile unsigned short*)(DBOP_BASE + 0x10)) #define DBOP_DOUT32 (*(volatile unsigned long *)(DBOP_BASE + 0x10)) #define DBOP_DIN (*(volatile unsigned short*)(DBOP_BASE + 0x14)) /** * Reset Control Lines in CCU_SRC register **/ #define CCU_SRC_DBOP_EN ( 1 << 24 ) #define CCU_SRC_SPDIF_EN ( 1 << 22 ) #define CCU_SRC_TIMER_EN ( 1 << 21 ) #define CCU_SRC_SSP_EN ( 1 << 20 ) #define CCU_SRC_WDO_EN ( 1 << 19 ) #define CCU_SRC_IDE_EN ( 1 << 18 ) #define CCU_SRC_IDE_AHB_EN ( 1 << 17 ) #define CCU_SRC_UART0 ( 1 << 16 ) #define CCU_SRC_NAF_EN ( 1 << 15 ) #define CCU_SRC_SDMCI_EN ( 1 << 14 ) #define CCU_SRC_GPIO_EN ( 1 << 13 ) #define CCU_SRC_I2C_AUDIO_EN ( 1 << 12 ) #define CCU_SRC_I2C_EN ( 1 << 11 ) #define CCU_SRC_MST_EN ( 1 << 10 ) #define CCU_SRC_I2SIN ( 1 << 9 ) #define CCU_SRC_I2SOUT ( 1 << 8 ) #define CCU_SRC_USB_AHB_EN ( 1 << 7 ) #define CCU_SRC_USB_PHY_EN ( 1 << 6 ) #define CCU_SRC_DMAC_EN ( 1 << 5 ) #define CCU_SRC_VIC_EN ( 1 << 4 ) /** * Magic number for CCU_SRL for reset. **/ #define CCU_SRL_MAGIC_NUMBER 0x1A720212 /** * Chip select lines for NAF. Use these constants to select/deselct the CE lines * for NAND flashes in Register CCU_IO. **/ #define CCU_IO_NAF_CE_LINE_0 ( 0 << 7 ) #define CCU_IO_NAF_CE_LINE_1 ( 1 << 7 ) #define CCU_IO_NAF_CE_LINE_2 ( 2 << 7 ) #define CCU_IO_NAF_CE_LINE_3 ( 3 << 7 ) /* CCU IO Select/Deselect IDE */ #define CCU_IO_IDE ( 1 << 5 ) /* CCU IO Select/desect I2C */ #define CCU_IO_I2C_MASTER_SLAVE ( 1 << 1 ) /* CCU IO Select/desect UART */ #define CCU_IO_UART0 ( 1 << 0 ) #define CCU_RESET_ALL_BUT_MEMORY \ ( CCU_SRC_DBOP_EN \ | CCU_SRC_SPDIF_EN \ | CCU_SRC_TIMER_EN \ | CCU_SRC_SSP_EN \ | CCU_SRC_WDO_EN \ | CCU_SRC_IDE_EN \ | CCU_SRC_IDE_AHB_EN \ | CCU_SRC_UART0 \ | CCU_SRC_NAF_EN \ | CCU_SRC_SDMCI_EN \ | CCU_SRC_GPIO_EN \ | CCU_SRC_I2C_AUDIO_EN \ | CCU_SRC_I2C_EN \ | CCU_SRC_MST_EN \ | CCU_SRC_I2SIN \ | CCU_SRC_I2SOUT \ | CCU_SRC_USB_AHB_EN \ | CCU_SRC_USB_PHY_EN \ | CCU_SRC_DMAC_EN \ | CCU_SRC_VIC_EN \ ) #define CCU_IO_UART ( 1 << 0 ) /* ------------------------------------------------------------------------ * AS352X clock control registers * ------------------------------------------------------------------------ */ #define CGU_PLLA (*(volatile unsigned long *)(CGU_BASE + 0x00)) #define CGU_PLLB (*(volatile unsigned long *)(CGU_BASE + 0x04)) #define CGU_PLLASUP (*(volatile unsigned long *)(CGU_BASE + 0x08)) #define CGU_PLLBSUP (*(volatile unsigned long *)(CGU_BASE + 0x0C)) #define CGU_PROC (*(volatile unsigned long *)(CGU_BASE + 0x10)) #define CGU_PERI (*(volatile unsigned long *)(CGU_BASE + 0x14)) #define CGU_AUDIO (*(volatile unsigned long *)(CGU_BASE + 0x18)) #define CGU_USB (*(volatile unsigned long *)(CGU_BASE + 0x1C)) #define CGU_INTCTRL (*(volatile unsigned long *)(CGU_BASE + 0x20)) #define CGU_IRQ (*(volatile unsigned long *)(CGU_BASE + 0x24)) #define CGU_COUNTA (*(volatile unsigned long *)(CGU_BASE + 0x28)) #define CGU_COUNTB (*(volatile unsigned long *)(CGU_BASE + 0x2C)) #define CGU_IDE (*(volatile unsigned long *)(CGU_BASE + 0x30)) #define CGU_MEMSTICK (*(volatile unsigned long *)(CGU_BASE + 0x34)) #define CGU_DBOP (*(volatile unsigned long *)(CGU_BASE + 0x38)) #define CGU_VIC_CLOCK_ENABLE ( 1 << 23 ) /* vic */ /* --- are disabled after reset --- */ #define CGU_EXTMEM_CLOCK_ENABLE ( 1 << 27 ) /* external memory */ #define CGU_EXTMEMIF_CLOCK_ENABLE ( 1 << 26 ) /* ext mem AHB IF */ #define CGU_DMA_CLOCK_ENABLE ( 1 << 22 ) /* dma */ #define CGU_USB_CLOCK_ENABLE ( 1 << 21 ) /* usb */ #define CGU_I2SOUT_APB_CLOCK_ENABLE ( 1 << 20 ) /* i2sout */ #define CGU_I2SIN_APB_CLOCK_ENABLE ( 1 << 19 ) /* i2sin */ #define CGU_I2C_MASTER_SLAVE_CLOCK_ENABLE ( 1 << 18 ) /* i2c master/slave */ #define CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE ( 1 << 17 ) /* i2c audio master */ #define CGU_GPIO_CLOCK_ENABLE ( 1 << 16 ) /* gpio */ #define CGU_MCI_CLOCK_ENABLE ( 1 << 15 ) /* mmc + sd */ #define CGU_NAF_CLOCK_ENABLE ( 1 << 14 ) /* naf */ #define CGU_UART_APB_CLOCK_ENABLE ( 1 << 13 ) /* uart */ #define CGU_WDOCNT_CLOCK_ENABLE ( 1 << 12 ) /* watchdog counter */ #define CGU_WDOIF_CLOCK_ENABLE ( 1 << 11 ) /* watchdog timer module */ #define CGU_SSP_CLOCK_ENABLE ( 1 << 10 ) /* ssp */ #define CGU_TIMER1_CLOCK_ENABLE ( 1 << 9 ) /* timer 1 */ #define CGU_TIMER2_CLOCK_ENABLE ( 1 << 8 ) /* timer 2 */ #define CGU_TIMERIF_CLOCK_ENABLE ( 1 << 7 ) /* timer interface */ /** ------------------------------------------------------------------ * Number of cycles to wait before cgu is safely locked. **/ #define CGU_LOCK_CNT 0xFF /* FIFO depth is 16 for tx and rx fifo */ #define UART_FIFO_DEPTH 16 /* ------------------- UART Line Control Register bit fields -------------------- */ #define UART_LNCTL_DLSEN (1 << 7) /* Device latch select bit */ /* -------------- UART Interrupt Control Register bit fields --------------- */ #define UART_INTR_RXDRDY 0x1 /* Data ready interrupt */ #define UART_INTR_TXEMT 0x2 /* Transmit data empty interrupt */ #define UART_INTR_RXLINESTATUS 0x4 /* Receive line status interrupt */ /* ------------------- UART Line Status Register bit fields -------------------- */ #define UART_ERRORBITS 0x1E #define UART_RX_DATA_READY (1 << 0) #define UART_TX_HOLD_EMPTY (1 << 5) /* ------------------- FIFO CNTL Register contants -------------------*/ #define UART_FIFO_EN (1 << 0) /* Enable the UART FIFO */ #define UART_TX_FIFO_RST (1 << 1) /* Enable the UART FIFO */ #define UART_RX_FIFO_RST (1 << 2) #define UART_RXFIFO_TRIGLVL_1 (0 << 4) /* RX FIFO TRIGGER_LEVEL 1 */ #define UART_RXFIFO_TRIGLVL_4 0x08 /* RX FIFO TRIGGER_LEVEL 4 */ #define UART_RXFIFO_TRIGLVL_8 0x10 /* RX FIFO TRIGGER_LEVEL 8 */ #define UART_RXFIFO_TRIGLVL_14 0x18 /* RX FIFO TRIGGER_LEVEL 14 */ /* ------------------- FIFO status Register contants ------------------*/ #define UART_TX_FIFO_FULL (1 << 0) #define UART_RX_FIFO_FULL (1 << 1) #define UART_TX_FIFO_EMPTY (1 << 2) #define UART_RX_FIFO_EMPTY (1 << 3) /* ----------------------- defines ---------------------------------------- */ #define UART_DATA_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Data register */ #define UART_DLO_REG (*(volatile unsigned long*)(UART0_BASE + 0x00)) /* Clock divider(lower byte) register */ #define UART_DHI_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Clock divider(higher byte) register */ #define UART_INTEN_REG (*(volatile unsigned long*)(UART0_BASE + 0x04)) /* Interrupt enable register */ #define UART_INTSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x08)) /* Interrupt status register */ #define UART_FCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo control register */ #define UART_FSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x0C)) /* Fifo status register */ #define UART_LNCTL_REG (*(volatile unsigned long*)(UART0_BASE + 0x10)) /* Line control register */ #define UART_LNSTATUS_REG (*(volatile unsigned long*)(UART0_BASE + 0x14)) /* Line status register */ #define SD_MCI_POWER (*(volatile unsigned long*)(SD_MCI_BASE + 0x0)) #define TIMER1_LOAD (*(volatile unsigned long*)(TIMER_BASE + 0x00)) /* 32-bit width */ #define TIMER1_VALUE (*(volatile unsigned long*)(TIMER_BASE + 0x04)) /* 32 bit width */ #define TIMER1_CONTROL (*(volatile unsigned long*)(TIMER_BASE + 0x08)) /* 8 bit width */ #define TIMER1_INTCLR (*(volatile unsigned long*)(TIMER_BASE + 0x0C)) /* clears ir by write access */ #define TIMER1_RIS (*(volatile unsigned long*)(TIMER_BASE + 0x10)) /* 1 bit width */ #define TIMER1_MIS (*(volatile unsigned long*)(TIMER_BASE + 0x14)) /* 1 bit width */ #define TIMER1_BGLOAD (*(volatile unsigned long*)(TIMER_BASE + 0x18)) /* 32-bit width */ #define TIMER2_LOAD (*(volatile unsigned long*)(TIMER_BASE + 0x20)) /* 32-bit width */ #define TIMER2_VALUE (*(volatile unsigned long*)(TIMER_BASE + 0x24)) /* 32 bit width */ #define TIMER2_CONTROL (*(volatile unsigned long*)(TIMER_BASE + 0x28)) /* 8 bit width */ #define TIMER2_INTCLR (*(volatile unsigned long*)(TIMER_BASE + 0x2C)) /* clears ir by write access */ #define TIMER2_RIS (*(volatile unsigned long*)(TIMER_BASE + 0x30)) /* 1 bit width */ #define TIMER2_MIS (*(volatile unsigned long*)(TIMER_BASE + 0x34)) /* 1 bit width */ #define TIMER2_BGLOAD (*(volatile unsigned long*)(TIMER_BASE + 0x38)) /* 32-bit width */ /** * Counter/Timer control register bits **/ #define TIMER_ENABLE 0x80 #define TIMER_PERIODIC 0x40 #define TIMER_INT_ENABLE 0x20 #define TIMER_32_BIT 0x02 #define TIMER_ONE_SHOT 0x01 #define TIMER_PRESCALE_1 0x00 #define TIMER_PRESCALE_16 0x04 #define TIMER_PRESCALE_256 0x08 /* Watchdog registers */ #define WDT_LOAD (*(volatile unsigned long*)(WDT_BASE)) #define WDT_CONTROL (*(volatile unsigned long*)(WDT_BASE+8)) /* GPIO registers */ #define GPIOA_DIR (*(volatile unsigned char*)(GPIOA_BASE+0x400)) #define GPIOA_IS (*(volatile unsigned char*)(GPIOA_BASE+0x404)) #define GPIOA_IBE (*(volatile unsigned char*)(GPIOA_BASE+0x408)) #define GPIOA_IEV (*(volatile unsigned char*)(GPIOA_BASE+0x40C)) #define GPIOA_IE (*(volatile unsigned char*)(GPIOA_BASE+0x410)) #define GPIOA_RIS (*(volatile unsigned char*)(GPIOA_BASE+0x414)) #define GPIOA_MIS (*(volatile unsigned char*)(GPIOA_BASE+0x418)) #define GPIOA_IC (*(volatile unsigned char*)(GPIOA_BASE+0x41C)) #define GPIOA_AFSEL (*(volatile unsigned char*)(GPIOA_BASE+0x420)) #define GPIOA_PIN(a) (*(volatile unsigned char*)(GPIOA_BASE+(1<<((a)+2)))) #define GPIOA_DATA (*(volatile unsigned char*)(GPIOA_BASE+(0xff<<2))) #define GPIOB_DIR (*(volatile unsigned char*)(GPIOB_BASE+0x400)) #define GPIOB_IS (*(volatile unsigned char*)(GPIOB_BASE+0x404)) #define GPIOB_IBE (*(volatile unsigned char*)(GPIOB_BASE+0x408)) #define GPIOB_IEV (*(volatile unsigned char*)(GPIOB_BASE+0x40C)) #define GPIOB_IE (*(volatile unsigned char*)(GPIOB_BASE+0x410)) #define GPIOB_RIS (*(volatile unsigned char*)(GPIOB_BASE+0x414)) #define GPIOB_MIS (*(volatile unsigned char*)(GPIOB_BASE+0x418)) #define GPIOB_IC (*(volatile unsigned char*)(GPIOB_BASE+0x41C)) #define GPIOB_AFSEL (*(volatile unsigned char*)(GPIOB_BASE+0x420)) #define GPIOB_PIN(a) (*(volatile unsigned char*)(GPIOB_BASE+(1<<((a)+2)))) #define GPIOB_DATA (*(volatile unsigned char*)(GPIOB_BASE+(0xff<<2))) #define GPIOC_DIR (*(volatile unsigned char*)(GPIOC_BASE+0x400)) #define GPIOC_IS (*(volatile unsigned char*)(GPIOC_BASE+0x404)) #define GPIOC_IBE (*(volatile unsigned char*)(GPIOC_BASE+0x408)) #define GPIOC_IEV (*(volatile unsigned char*)(GPIOC_BASE+0x40C)) #define GPIOC_IE (*(volatile unsigned char*)(GPIOC_BASE+0x410)) #define GPIOC_RIS (*(volatile unsigned char*)(GPIOC_BASE+0x414)) #define GPIOC_MIS (*(volatile unsigned char*)(GPIOC_BASE+0x418)) #define GPIOC_IC (*(volatile unsigned char*)(GPIOC_BASE+0x41C)) #define GPIOC_AFSEL (*(volatile unsigned char*)(GPIOC_BASE+0x420)) #define GPIOC_PIN(a) (*(volatile unsigned char*)(GPIOC_BASE+(1<<((a)+2)))) #define GPIOC_DATA (*(volatile unsigned char*)(GPIOC_BASE+(0xff<<2))) #define GPIOD_DIR (*(volatile unsigned char*)(GPIOD_BASE+0x400)) #define GPIOD_IS (*(volatile unsigned char*)(GPIOD_BASE+0x404)) #define GPIOD_IBE (*(volatile unsigned char*)(GPIOD_BASE+0x408)) #define GPIOD_IEV (*(volatile unsigned char*)(GPIOD_BASE+0x40C)) #define GPIOD_IE (*(volatile unsigned char*)(GPIOD_BASE+0x410)) #define GPIOD_RIS (*(volatile unsigned char*)(GPIOD_BASE+0x414)) #define GPIOD_MIS (*(volatile unsigned char*)(GPIOD_BASE+0x418)) #define GPIOD_IC (*(volatile unsigned char*)(GPIOD_BASE+0x41C)) #define GPIOD_AFSEL (*(volatile unsigned char*)(GPIOD_BASE+0x420)) #define GPIOD_PIN(a) (*(volatile unsigned char*)(GPIOD_BASE+(1<<((a)+2)))) #define GPIOD_DATA (*(volatile unsigned char*)(GPIOD_BASE+(0xff<<2))) /* ARM PL172 Memory Controller registers */ #define MPMC_CONTROL (*(volatile unsigned long*)(MPMC_BASE+0x000)) #define MPMC_STATUS (*(volatile unsigned long*)(MPMC_BASE+0x004)) #define MPMC_CONFIG (*(volatile unsigned long*)(MPMC_BASE+0x008)) #define MPMC_DYNAMIC_CONTROL (*(volatile unsigned long*)(MPMC_BASE+0x020)) #define MPMC_DYNAMIC_REFRESH (*(volatile unsigned long*)(MPMC_BASE+0x024)) #define MPMC_DYNAMIC_READ_CONFIG (*(volatile unsigned long*)(MPMC_BASE+0x028)) #define MPMC_DYNAMIC_tRP (*(volatile unsigned long*)(MPMC_BASE+0x030)) #define MPMC_DYNAMIC_tRAS (*(volatile unsigned long*)(MPMC_BASE+0x034)) #define MPMC_DYNAMIC_tSREX (*(volatile unsigned long*)(MPMC_BASE+0x038)) #define MPMC_DYNAMIC_tAPR (*(volatile unsigned long*)(MPMC_BASE+0x03C)) #define MPMC_DYNAMIC_tDAL (*(volatile unsigned long*)(MPMC_BASE+0x040)) #define MPMC_DYNAMIC_tWR (*(volatile unsigned long*)(MPMC_BASE+0x044)) #define MPMC_DYNAMIC_tRC (*(volatile unsigned long*)(MPMC_BASE+0x048)) #define MPMC_DYNAMIC_tRFC (*(volatile unsigned long*)(MPMC_BASE+0x04C)) #define MPMC_DYNAMIC_tXSR (*(volatile unsigned long*)(MPMC_BASE+0x050)) #define MPMC_DYNAMIC_tRRD (*(volatile unsigned long*)(MPMC_BASE+0x054)) #define MPMC_DYNAMIC_tMRD (*(volatile unsigned long*)(MPMC_BASE+0x058)) #define MPMC_STATIC_EXTENDED_WAIT (*(volatile unsigned long*)(MPMC_BASE+0x080)) #define MPMC_DYNAMIC_CONFIG_0 (*(volatile unsigned long*)(MPMC_BASE+0x100)) #define MPMC_DYNAMIC_CONFIG_1 (*(volatile unsigned long*)(MPMC_BASE+0x120)) #define MPMC_DYNAMIC_CONFIG_2 (*(volatile unsigned long*)(MPMC_BASE+0x140)) #define MPMC_DYNAMIC_CONFIG_3 (*(volatile unsigned long*)(MPMC_BASE+0x160)) #define MPMC_DYNAMIC_RASCAS_0 (*(volatile unsigned long*)(MPMC_BASE+0x104)) #define MPMC_DYNAMIC_RASCAS_1 (*(volatile unsigned long*)(MPMC_BASE+0x124)) #define MPMC_DYNAMIC_RASCAS_2 (*(volatile unsigned long*)(MPMC_BASE+0x144)) #define MPMC_DYNAMIC_RASCAS_3 (*(volatile unsigned long*)(MPMC_BASE+0x164)) #define MPMC_PERIPH_ID2 (*(volatile unsigned long*)(MPMC_BASE+0xFE8)) /* VIC controller (PL190) registers */ #define VIC_IRQ_STATUS (*(volatile unsigned long*)(VIC_BASE+0x00)) #define VIC_FIQ_STATUS (*(volatile unsigned long*)(VIC_BASE+0x04)) #define VIC_RAW_INTR (*(volatile unsigned long*)(VIC_BASE+0x08)) #define VIC_INT_SELECT (*(volatile unsigned long*)(VIC_BASE+0x0C)) #define VIC_INT_ENABLE (*(volatile unsigned long*)(VIC_BASE+0x10)) #define VIC_INT_EN_CLEAR (*(volatile unsigned long*)(VIC_BASE+0x14)) #define VIC_SOFT_INT (*(volatile unsigned long*)(VIC_BASE+0x18)) #define VIC_SOFT_INT_CLEAR (*(volatile unsigned long*)(VIC_BASE+0x1C)) #define VIC_PROTECTION (*(volatile unsigned long*)(VIC_BASE+0x20)) #define VIC_VECT_ADDR (*(volatile unsigned long*)(VIC_BASE+0x30)) #define VIC_DEF_VECT_ADDR (*(volatile unsigned long*)(VIC_BASE+0x34)) #define VIC_VECT_ADDRS ((volatile unsigned long*)(VIC_BASE+0x100)) #define VIC_VECT_CNTLS ((volatile unsigned long*)(VIC_BASE+0x200)) /* Interrupt sources (for vectors setup) */ #define INT_SRC_WATCHDOG 0 #define INT_SRC_TIMER1 1 #define INT_SRC_TIMER2 2 #define INT_SRC_USB 3 #define INT_SRC_DMAC 4 #define INT_SRC_NAND 5 #define INT_SRC_IDE 6 #define INT_SRC_MCI0 7 #define INT_SRC_MCI1 8 #define INT_SRC_AUDIO 9 #define INT_SRC_SSP 10 #define INT_SRC_I2C_MS 11 #define INT_SRC_I2C_AUDIO 12 #define INT_SRC_I2SIN 13 #define INT_SRC_I2SOUT 14 #define INT_SRC_UART 15 #define INT_SRC_GPIOD 16 /* 17 reserved */ #define INT_SRC_CGU 18 #define INT_SRC_MEMORY_STICK 19 #define INT_SRC_DBOP 20 /* 21-28 reserved */ #define INT_SRC_GPIOA 29 #define INT_SRC_GPIOB 30 #define INT_SRC_GPIOC 31 /* Interrupt sources bitmask */ #define INTERRUPT_WATCHDOG (1<<0) #define INTERRUPT_TIMER1 (1<<1) #define INTERRUPT_TIMER2 (1<<2) #define INTERRUPT_USB (1<<3) #define INTERRUPT_DMAC (1<<4) #define INTERRUPT_NAND (1<<5) #define INTERRUPT_IDE (1<<6) #define INTERRUPT_MCI0 (1<<7) #define INTERRUPT_MCI1 (1<<8) #define INTERRUPT_AUDIO (1<<9) #define INTERRUPT_SSP (1<<10) #define INTERRUPT_I2C_MS (1<<11) #define INTERRUPT_I2C_AUDIO (1<<12) #define INTERRUPT_I2SIN (1<<13) #define INTERRUPT_I2SOUT (1<<14) #define INTERRUPT_UART (1<<15) #define INTERRUPT_GPIOD (1<<16) /* 17 reserved */ #define INTERRUPT_CGU (1<<18) #define INTERRUPT_MEMORY_STICK (1<<19) #define INTERRUPT_DBOP (1<<20) /* 21-28 reserved */ #define INTERRUPT_GPIOA (1<<29) #define INTERRUPT_GPIOB (1<<30) #define INTERRUPT_GPIOC (1<<31) /* I2SOUT registers */ #define I2SOUT_CONTROL (*(volatile unsigned char*)(I2SOUT_BASE+0x00)) #define I2SOUT_MASK (*(volatile unsigned char*)(I2SOUT_BASE+0x04)) #define I2SOUT_RAW_STATUS (*(volatile unsigned char*)(I2SOUT_BASE+0x08)) #define I2SOUT_STATUS (*(volatile unsigned char*)(I2SOUT_BASE+0x0C)) #define I2SOUT_CLEAR (*(volatile unsigned char*)(I2SOUT_BASE+0x10)) #define I2SOUT_DATA (volatile unsigned long*)(I2SOUT_BASE+0x14) /* SSP registers (PrimeCell PL022) */ #define SSP_CR0 (*(volatile unsigned short*)(SSP_BASE+0x00)) #define SSP_CR1 (*(volatile unsigned char*)(SSP_BASE+0x04)) #define SSP_DATA (*(volatile unsigned short*)(SSP_BASE+0x08)) #define SSP_SR (*(volatile unsigned char*)(SSP_BASE+0x0C)) #define SSP_CPSR (*(volatile unsigned char*)(SSP_BASE+0x10)) #define SSP_IMSC (*(volatile unsigned char*)(SSP_BASE+0x14)) #define SSP_IRS (*(volatile unsigned char*)(SSP_BASE+0x18)) #define SSP_MIS (*(volatile unsigned char*)(SSP_BASE+0x1C)) #define SSP_ICR (*(volatile unsigned char*)(SSP_BASE+0x20)) #define SSP_DMACR (*(volatile unsigned char*)(SSP_BASE+0x24)) /* PCM addresses for obtaining buffers will be what DMA is using (physical) */ #define HAVE_PCM_DMA_ADDRESS #define HAVE_PCM_REC_DMA_ADDRESS /* Timer frequency */ #define TIMER_FREQ (24000000 / 16) /* USB : TODO */ #define USB_NUM_ENDPOINTS 4 #define USB_DEVBSS_ATTR IBSS_ATTR /* I2SIN registers */ #define I2SIN_CONTROL (*(volatile unsigned long*)(I2SIN_BASE+0x00)) #define I2SIN_MASK (*(volatile unsigned char*)(I2SIN_BASE+0x04)) #define I2SIN_RAW_STATUS (*(volatile unsigned char*)(I2SIN_BASE+0x08)) #define I2SIN_STATUS (*(volatile unsigned char*)(I2SIN_BASE+0x0C)) #define I2SIN_CLEAR (*(volatile unsigned char*)(I2SIN_BASE+0x10)) #define I2SIN_DATA (volatile unsigned long*)(I2SIN_BASE+0x14) #define I2SIN_SPDIF_STATUS (*(volatile unsigned long*)(I2SIN_BASE+0x18)) /* I2SIN_MASK */ #define I2SIN_MASK_PUER ( 1<<6 ) /* push error */ #define I2SIN_MASK_POE ( 1<<5 ) /* empty */ #define I2SIN_MASK_POAE ( 1<<4 ) /* almost empty */ #define I2SIN_MASK_POHF ( 1<<3 ) /* half full */ #define I2SIN_MASK_POAF ( 1<<2 ) /* almost full */ #define I2SIN_MASK_POF ( 1<<1 ) /* full */ #define I2SIN_MASK_POER ( 1<<0 ) /* pop error */ #endif /*__AS3525_H__*/