/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Barry Wardell * * ARC OTG USB device driver based on code from the Linux Target Image Builder * from Freescale - http://www.bitshrine.org/ and * http://www.bitshrine.org/gpp/linux-2.6.16-mx31-usb-2.patch * Adapted for Rockbox in January 2007 * Original file: drivers/usb/gadget/arcotg_udc.h * * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. * * Based on mpc-udc.h * Author: Li Yang (leoli@freescale.com) * Jiang Bo (Tanya.jiang@freescale.com) * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ /* * Freescale USB device/endpoint management registers */ #ifndef __ARCOTG_UDC_H #define __ARCOTG_UDC_H #include "cpu.h" #define ETIMEDOUT 1 #define USB_MAX_ENDPOINTS 8 #define USB_MAX_PIPES (USB_MAX_ENDPOINTS*2) #define USB_MAX_CTRL_PAYLOAD 64 /* USB DR device mode registers (Little Endian) */ /* Identification registers */ #define UDC_ID (*(volatile unsigned int *)(USB_BASE+0x000)) #define UDC_HWGENERAL (*(volatile unsigned int *)(USB_BASE+0x004)) #define UDC_HWHOST (*(volatile unsigned int *)(USB_BASE+0x008)) #define UDC_HWTXBUF (*(volatile unsigned int *)(USB_BASE+0x010)) #define UDC_HWRXBUF (*(volatile unsigned int *)(USB_BASE+0x014)) /* Capability registers */ #define UDC_CAPLENGTH (*(volatile unsigned char *)(USB_BASE+0x100)) /* Capability Register Length */ #define UDC_HCIVERSION (*(volatile unsigned short *)(USB_BASE+0x102)) /* Host Controller Interface Version */ #define UDC_HCSPARAMS (*(volatile unsigned int *)(USB_BASE+0x104)) /* Host Controller Structual Parameters */ #define UDC_HCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x108)) /* Host Controller Capability Parameters */ #define UDC_DCIVERSION (*(volatile unsigned short *)(USB_BASE+0x120)) /* Device Controller Interface Version */ #define UDC_DCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x124)) /* Device Controller Capability Parameters */ /* Operation registers */ #define UDC_USBCMD (*(volatile unsigned int *)(USB_BASE+0x140)) /* USB Command Register */ #define UDC_USBSTS (*(volatile unsigned int *)(USB_BASE+0x144)) /* USB Status Register */ #define UDC_USBINTR (*(volatile unsigned int *)(USB_BASE+0x148)) /* USB Interrupt Enable Register */ #define UDC_FRINDEX (*(volatile unsigned int *)(USB_BASE+0x14c)) /* Frame Index Register */ #define UDC_DEVICEADDR (*(volatile unsigned int *)(USB_BASE+0x154)) /* Device Address */ #define UDC_ENDPOINTLISTADDR (*(volatile unsigned int *)(USB_BASE+0x158)) /* Endpoint List Address Register */ #define UDC_BURSTSIZE (*(volatile unsigned int *)(USB_BASE+0x160)) /* Master Interface Data Burst Size Register */ #define UDC_TXFILLTUNING (*(volatile unsigned int *)(USB_BASE+0x164)) /* Transmit FIFO Tuning Controls Register */ #define UDC_ULPIVIEW (*(volatile unsigned int *)(USB_BASE+0x170)) #define UDC_CFGFLAG (*(volatile unsigned int *)(USB_BASE+0x180)) /* Configure Flag Register */ #define UDC_PORTSC1 (*(volatile unsigned int *)(USB_BASE+0x184)) /* Port 1 Status and Control Register */ #define UDC_OTGSC (*(volatile unsigned int *)(USB_BASE+0x1a4)) /* On-The-Go Status and Control */ #define UDC_USBMODE (*(volatile unsigned int *)(USB_BASE+0x1a8)) /* USB Mode Register */ #define UDC_ENDPTSETUPSTAT (*(volatile unsigned int *)(USB_BASE+0x1ac)) /* Endpoint Setup Status Register */ #define UDC_ENDPTPRIME (*(volatile unsigned int *)(USB_BASE+0x1b0)) /* Endpoint Initialization Register */ #define UDC_ENDPTFLUSH (*(volatile unsigned int *)(USB_BASE+0x1b4)) /* Endpoint Flush Register */ #define UDC_ENDPTSTAT (*(volatile unsigned int *)(USB_BASE+0x1b8)) /* Endpoint Status Register */ #define UDC_ENDPTCOMPLETE (*(volatile unsigned int *)(USB_BASE+0x1bc)) /* Endpoint Complete Register */ #define UDC_ENDPTCTRL0 (*(volatile unsigned int *)(USB_BASE+0x1c0)) /* Endpoint 0 Control Register */ #define UDC_ENDPTCTRL1 (*(volatile unsigned int *)(USB_BASE+0x1c4)) /* Endpoint 1 Control Register */ #define UDC_ENDPTCTRL2 (*(volatile unsigned int *)(USB_BASE+0x1c8)) /* Endpoint 2 Control Register */ #define UDC_ENDPTCTRL3 (*(volatile unsigned int *)(USB_BASE+0x1cc)) /* Endpoint 3 Control Register */ #define UDC_ENDPTCTRL4 (*(volatile unsigned int *)(USB_BASE+0x1d0)) /* Endpoint 4 Control Register */ #define UDC_ENDPTCTRL5 (*(volatile unsigned int *)(USB_BASE+0x1d4)) /* Endpoint 5 Control Register */ #define UDC_ENDPTCTRL6 (*(volatile unsigned int *)(USB_BASE+0x1d8)) /* Endpoint 6 Control Register */ #define UDC_ENDPTCTRL7 (*(volatile unsigned int *)(USB_BASE+0x1dc)) /* Endpoint 7 Control Register */ #define UDC_ENDPTCTRL(x) (*(volatile unsigned int *)(USB_BASE+0x1c0+4*(x))) /* Endpoint X Control Register */ /* ep0 transfer state */ #define WAIT_FOR_SETUP 0 #define DATA_STATE_XMIT 1 #define DATA_STATE_NEED_ZLP 2 #define WAIT_FOR_OUT_STATUS 3 #define DATA_STATE_RECV 4 /* Frame Index Register Bit Masks */ #define USB_FRINDEX_MASKS (0x3fff) /* USB CMD Register Bit Masks */ #define USB_CMD_RUN_STOP (0x00000001) #define USB_CMD_CTRL_RESET (0x00000002) #define USB_CMD_PERIODIC_SCHEDULE_EN (0x00000010) #define USB_CMD_ASYNC_SCHEDULE_EN (0x00000020) #define USB_CMD_INT_AA_DOORBELL (0x00000040) #define USB_CMD_ASP (0x00000300) #define USB_CMD_ASYNC_SCH_PARK_EN (0x00000800) #define USB_CMD_SUTW (0x00002000) #define USB_CMD_ATDTW (0x00004000) #define USB_CMD_ITC (0x00FF0000) /* bit 15,3,2 are frame list size */ #define USB_CMD_FRAME_SIZE_1024 (0x00000000) #define USB_CMD_FRAME_SIZE_512 (0x00000004) #define USB_CMD_FRAME_SIZE_256 (0x00000008) #define USB_CMD_FRAME_SIZE_128 (0x0000000C) #define USB_CMD_FRAME_SIZE_64 (0x00008000) #define USB_CMD_FRAME_SIZE_32 (0x00008004) #define USB_CMD_FRAME_SIZE_16 (0x00008008) #define USB_CMD_FRAME_SIZE_8 (0x0000800C) /* bit 9-8 are async schedule park mode count */ #define USB_CMD_ASP_00 (0x00000000) #define USB_CMD_ASP_01 (0x00000100) #define USB_CMD_ASP_10 (0x00000200) #define USB_CMD_ASP_11 (0x00000300) #define USB_CMD_ASP_BIT_POS (8) /* bit 23-16 are interrupt threshold control */ #define USB_CMD_ITC_NO_THRESHOLD (0x00000000) #define USB_CMD_ITC_1_MICRO_FRM (0x00010000) #define USB_CMD_ITC_2_MICRO_FRM (0x00020000) #define USB_CMD_ITC_4_MICRO_FRM (0x00040000) #define USB_CMD_ITC_8_MICRO_FRM (0x00080000) #define USB_CMD_ITC_16_MICRO_FRM (0x00100000) #define USB_CMD_ITC_32_MICRO_FRM (0x00200000) #define USB_CMD_ITC_64_MICRO_FRM (0x00400000) #define USB_CMD_ITC_BIT_POS (16) /* USB STS Register Bit Masks */ #define USB_STS_INT (0x00000001) #define USB_STS_ERR (0x00000002) #define USB_STS_PORT_CHANGE (0x00000004) #define USB_STS_FRM_LST_ROLL (0x00000008) #define USB_STS_SYS_ERR (0x00000010) #define USB_STS_IAA (0x00000020) #define USB_STS_RESET (0x00000040) #define USB_STS_SOF (0x00000080) #define USB_STS_SUSPEND (0x00000100) #define USB_STS_HC_HALTED (0x00001000) #define USB_STS_RCL (0x00002000) #define USB_STS_PERIODIC_SCHEDULE (0x00004000) #define USB_STS_ASYNC_SCHEDULE (0x00008000) /* USB INTR Register Bit Masks */ #define USB_INTR_INT_EN (0x00000001) #define USB_INTR_ERR_INT_EN (0x00000002) #define USB_INTR_PTC_DETECT_EN (0x00000004) #define USB_INTR_FRM_LST_ROLL_EN (0x00000008) #define USB_INTR_SYS_ERR_EN (0x00000010) #define USB_INTR_ASYN_ADV_EN (0x00000020) #define USB_INTR_RESET_EN (0x00000040) #define USB_INTR_SOF_EN (0x00000080) #define USB_INTR_DEVICE_SUSPEND (0x00000100) /* Device Address bit masks */ #define USB_DEVICE_ADDRESS_MASK (0xFE000000) #define USB_DEVICE_ADDRESS_BIT_POS (25) /* endpoint list address bit masks */ #define USB_EP_LIST_ADDRESS_MASK (0xfffff800) /* PORTSCX Register Bit Masks */ #define PORTSCX_CURRENT_CONNECT_STATUS (0x00000001) #define PORTSCX_CONNECT_STATUS_CHANGE (0x00000002) #define PORTSCX_PORT_ENABLE (0x00000004) #define PORTSCX_PORT_EN_DIS_CHANGE (0x00000008) #define PORTSCX_OVER_CURRENT_ACT (0x00000010) #define PORTSCX_OVER_CURRENT_CHG (0x00000020) #define PORTSCX_PORT_FORCE_RESUME (0x00000040) #define PORTSCX_PORT_SUSPEND (0x00000080) #define PORTSCX_PORT_RESET (0x00000100) #define PORTSCX_LINE_STATUS_BITS (0x00000C00) #define PORTSCX_PORT_POWER (0x00001000) #define PORTSCX_PORT_INDICTOR_CTRL (0x0000C000) #define PORTSCX_PORT_TEST_CTRL (0x000F0000) #define PORTSCX_WAKE_ON_CONNECT_EN (0x00100000) #define PORTSCX_WAKE_ON_CONNECT_DIS (0x00200000) #define PORTSCX_WAKE_ON_OVER_CURRENT (0x00400000) #define PORTSCX_PHY_LOW_POWER_SPD (0x00800000) #define PORTSCX_PORT_FORCE_FULL_SPEED (0x01000000) #define PORTSCX_PORT_SPEED_MASK (0x0C000000) #define PORTSCX_PORT_WIDTH (0x10000000) #define PORTSCX_PHY_TYPE_SEL (0xC0000000) /* bit 11-10 are line status */ #define PORTSCX_LINE_STATUS_SE0 (0x00000000) #define PORTSCX_LINE_STATUS_JSTATE (0x00000400) #define PORTSCX_LINE_STATUS_KSTATE (0x00000800) #define PORTSCX_LINE_STATUS_UNDEF (0x00000C00) #define PORTSCX_LINE_STATUS_BIT_POS (10) /* bit 15-14 are port indicator control */ #define PORTSCX_PIC_OFF (0x00000000) #define PORTSCX_PIC_AMBER (0x00004000) #define PORTSCX_PIC_GREEN (0x00008000) #define PORTSCX_PIC_UNDEF (0x0000C000) #define PORTSCX_PIC_BIT_POS (14) /* bit 19-16 are port test control */ #define PORTSCX_PTC_DISABLE (0x00000000) #define PORTSCX_PTC_JSTATE (0x00010000) #define PORTSCX_PTC_KSTATE (0x00020000) #define PORTSCX_PTC_SEQNAK (0x00030000) #define PORTSCX_PTC_PACKET (0x00040000) #define PORTSCX_PTC_FORCE_EN (0x00050000) #define PORTSCX_PTC_BIT_POS (16) /* bit 27-26 are port speed */ #define PORTSCX_PORT_SPEED_FULL (0x00000000) #define PORTSCX_PORT_SPEED_LOW (0x04000000) #define PORTSCX_PORT_SPEED_HIGH (0x08000000) #define PORTSCX_PORT_SPEED_UNDEF (0x0C000000) #define PORTSCX_SPEED_BIT_POS (26) /* bit 28 is parallel transceiver width for UTMI interface */ #define PORTSCX_PTW (0x10000000) #define PORTSCX_PTW_8BIT (0x00000000) #define PORTSCX_PTW_16BIT (0x10000000) /* bit 31-30 are port transceiver select */ #define PORTSCX_PTS_UTMI (0x00000000) #define PORTSCX_PTS_ULPI (0x80000000) #define PORTSCX_PTS_FSLS (0xC0000000) #define PORTSCX_PTS_BIT_POS (30) /* USB MODE Register Bit Masks */ #define USB_MODE_CTRL_MODE_IDLE (0x00000000) #define USB_MODE_CTRL_MODE_DEVICE (0x00000002) #define USB_MODE_CTRL_MODE_HOST (0x00000003) #define USB_MODE_CTRL_MODE_RSV (0x00000001) #define USB_MODE_SETUP_LOCK_OFF (0x00000008) #define USB_MODE_STREAM_DISABLE (0x00000010) /* Endpoint Flush Register */ #define EPFLUSH_TX_OFFSET (0x00010000) #define EPFLUSH_RX_OFFSET (0x00000000) /* Endpoint Setup Status bit masks */ #define EP_SETUP_STATUS_MASK (0x0000003F) #define EP_SETUP_STATUS_EP0 (0x00000001) /* ENDPOINTCTRLx Register Bit Masks */ #define EPCTRL_TX_ENABLE (0x00800000) #define EPCTRL_TX_DATA_TOGGLE_RST (0x00400000) /* Not EP0 */ #define EPCTRL_TX_DATA_TOGGLE_INH (0x00200000) /* Not EP0 */ #define EPCTRL_TX_TYPE (0x000C0000) #define EPCTRL_TX_DATA_SOURCE (0x00020000) /* Not EP0 */ #define EPCTRL_TX_EP_STALL (0x00010000) #define EPCTRL_RX_ENABLE (0x00000080) #define EPCTRL_RX_DATA_TOGGLE_RST (0x00000040) /* Not EP0 */ #define EPCTRL_RX_DATA_TOGGLE_INH (0x00000020) /* Not EP0 */ #define EPCTRL_RX_TYPE (0x0000000C) #define EPCTRL_RX_DATA_SINK (0x00000002) /* Not EP0 */ #define EPCTRL_RX_EP_STALL (0x00000001) /* bit 19-18 and 3-2 are endpoint type */ #define EPCTRL_EP_TYPE_CONTROL (0) #define EPCTRL_EP_TYPE_ISO (1) #define EPCTRL_EP_TYPE_BULK (2) #define EPCTRL_EP_TYPE_INTERRUPT (3) #define EPCTRL_TX_EP_TYPE_SHIFT (18) #define EPCTRL_RX_EP_TYPE_SHIFT (2) /* SNOOPn Register Bit Masks */ #define SNOOP_ADDRESS_MASK (0xFFFFF000) #define SNOOP_SIZE_ZERO (0x00) /* snooping disable */ #define SNOOP_SIZE_4KB (0x0B) /* 4KB snoop size */ #define SNOOP_SIZE_8KB (0x0C) #define SNOOP_SIZE_16KB (0x0D) #define SNOOP_SIZE_32KB (0x0E) #define SNOOP_SIZE_64KB (0x0F) #define SNOOP_SIZE_128KB (0x10) #define SNOOP_SIZE_256KB (0x11) #define SNOOP_SIZE_512KB (0x12) #define SNOOP_SIZE_1MB (0x13) #define SNOOP_SIZE_2MB (0x14) #define SNOOP_SIZE_4MB (0x15) #define SNOOP_SIZE_8MB (0x16) #define SNOOP_SIZE_16MB (0x17) #define SNOOP_SIZE_32MB (0x18) #define SNOOP_SIZE_64MB (0x19) #define SNOOP_SIZE_128MB (0x1A) #define SNOOP_SIZE_256MB (0x1B) #define SNOOP_SIZE_512MB (0x1C) #define SNOOP_SIZE_1GB (0x1D) #define SNOOP_SIZE_2GB (0x1E) /* 2GB snoop size */ /* pri_ctrl Register Bit Masks */ #define PRI_CTRL_PRI_LVL1 (0x0000000C) #define PRI_CTRL_PRI_LVL0 (0x00000003) /* si_ctrl Register Bit Masks */ #define SI_CTRL_ERR_DISABLE (0x00000010) #define SI_CTRL_IDRC_DISABLE (0x00000008) #define SI_CTRL_RD_SAFE_EN (0x00000004) #define SI_CTRL_RD_PREFETCH_DISABLE (0x00000002) #define SI_CTRL_RD_PREFEFETCH_VAL (0x00000001) /* control Register Bit Masks */ #define USB_CTRL_IOENB (0x00000004) #define USB_CTRL_ULPI_INT0EN (0x00000001) /* Externally used functions */ int dr_controller_setup(void); void dr_controller_run(void); void dr_controller_stop(void); #endif /* __ARCOTG_UDC_H */