/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Driver for WM8758 audio codec * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in December 2005 * * Original file: linux/arch/armnommu/mach-ipod/audio.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "lcd.h" #include "cpu.h" #include "kernel.h" #include "thread.h" #include "power.h" #include "debug.h" #include "system.h" #include "sprintf.h" #include "button.h" #include "string.h" #include "file.h" #include "buffer.h" #include "audio.h" #include "i2c-pp5020.h" #include "wm8758.h" #include "pcf50605.h" void wmcodec_reset(void); #define IPOD_PCM_LEVEL 0x65 /* -6dB */ //#define BASSCTRL 0x //#define TREBCTRL 0x0b /* * Reset the I2S BIT.FORMAT I2S, 16bit, FIFO.FORMAT 32bit */ static void i2s_reset(void) { /* PP502x */ /* I2S soft reset */ outl(inl(0x70002800) | 0x80000000, 0x70002800); outl(inl(0x70002800) & ~0x80000000, 0x70002800); /* BIT.FORMAT [11:10] = I2S (default) */ outl(inl(0x70002800) & ~0xc00, 0x70002800); /* BIT.SIZE [9:8] = 16bit (default) */ outl(inl(0x70002800) & ~0x300, 0x70002800); /* FIFO.FORMAT [6:4] = 32 bit LSB */ /* since BIT.SIZ < FIFO.FORMAT low 16 bits will be 0 */ outl(inl(0x70002800) | 0x30, 0x70002800); /* RX_ATN_LVL=1 == when 12 slots full */ /* TX_ATN_LVL=1 == when 12 slots empty */ outl(inl(0x7000280c) | 0x33, 0x7000280c); /* Rx.CLR = 1, TX.CLR = 1 */ outl(inl(0x7000280c) | 0x1100, 0x7000280c); } void wm8758_write(int reg, int data) { ipod_i2c_send(0x1a, (reg<<1) | ((data&0x100)>>8),data&0xff); } /* * Initialise the WM8758 for playback via headphone and line out. * Note, I'm using the WM8750 datasheet as its apparently close. */ int wmcodec_init(void) { /* normal outputs for CDI and I2S pin groups */ outl(inl(0x70000020) & ~0x300, 0x70000020); /*mini2?*/ outl(inl(0x70000010) & ~0x3000000, 0x70000010); /*mini2?*/ /* device reset */ outl(inl(0x60006004) | 0x800, 0x60006004); outl(inl(0x60006004) & ~0x800, 0x60006004); /* device enable */ outl(inl(0x6000600C) | 0x807, 0x6000600C); /* enable external dev clock clocks */ outl(inl(0x6000600c) | 0x2, 0x6000600c); /* external dev clock to 24MHz */ outl(inl(0x70000018) & ~0xc, 0x70000018); return 0; } /* Silently enable / disable audio output */ void wmcodec_enable_output(bool enable) { if (enable) { /* reset the I2S controller into known state */ i2s_reset(); /* TODO: Review the power-up sequence to prevent pops */ wm8758_write(RESET, 0x1ff); /*Reset*/ wm8758_write(PWRMGMT1, 0x2b); wm8758_write(PWRMGMT2, 0x180); wm8758_write(PWRMGMT3, 0x6f); wm8758_write(AINTFCE, 0x10); wm8758_write(CLKCTRL, 0x49); wm8758_write(OUTCTRL, 1); /* The iPod can handle multiple frequencies, but fix at 44.1KHz for now */ wmcodec_set_sample_rate(WM8758_44100HZ); wm8758_write(LOUTMIX,0x1); /* Enable mixer */ wm8758_write(ROUTMIX,0x1); /* Enable mixer */ wmcodec_mute(0); } else { wmcodec_mute(1); } } int wmcodec_set_master_vol(int vol_l, int vol_r) { /* OUT1 */ wm8758_write(LOUT1VOL, 0x080 | vol_l); wm8758_write(ROUT1VOL, 0x180 | vol_r); return 0; } int wmcodec_set_lineout_vol(int vol_l, int vol_r) { /* OUT2 */ wm8758_write(LOUT2VOL, vol_l); wm8758_write(ROUT2VOL, 0x100 | vol_r); return 0; } int wmcodec_set_mixer_vol(int channel1, int channel2) { (void)channel1; (void)channel2; return 0; } /* We are using Linear bass control */ void wmcodec_set_bass(int value) { (void)value; #if 0 /* Not yet implemented - this is the wm8975 code*/ int regvalues[]={11, 10, 10, 9, 8, 8, 0xf , 6, 6, 5, 4, 4, 3, 2, 1, 0}; if ((value >= -6) && (value <= 9)) { /* We use linear bass control with 130Hz cutoff */ wm8758_write(BASSCTRL, regvalues[value+6]); } #endif } void wmcodec_set_treble(int value) { (void)value; #if 0 /* Not yet implemented - this is the wm8975 code*/ int regvalues[]={11, 10, 10, 9, 8, 8, 0xf , 6, 6, 5, 4, 4, 3, 2, 1, 0}; if ((value >= -6) && (value <= 9)) { /* We use a 8Khz cutoff */ wm8758_write(TREBCTRL, regvalues[value+6]); } #endif } int wmcodec_mute(int mute) { if (mute) { /* Set DACMU = 1 to soft-mute the audio DACs. */ wm8758_write(DACCTRL, 0x40); } else { /* Set DACMU = 0 to soft-un-mute the audio DACs. */ wm8758_write(DACCTRL, 0x0); } return 0; } /* Nice shutdown of WM8758 codec */ void wmcodec_close(void) { wmcodec_mute(1); wm8758_write(PWRMGMT3, 0x0); wm8758_write(PWRMGMT1, 0x0); wm8758_write(PWRMGMT2, 0x40); } /* Change the order of the noise shaper, 5th order is recommended above 32kHz */ void wmcodec_set_nsorder(int order) { (void)order; } /* Note: Disable output before calling this function */ void wmcodec_set_sample_rate(int sampling_control) { /**** We force 44.1KHz for now. ****/ (void)sampling_control; /* set clock div */ wm8758_write(CLKCTRL, 1 | (0 << 2) | (2 << 5)); /* setup PLL for MHZ=11.2896 */ wm8758_write(PLLN, (1 << 4) | 0x7); wm8758_write(PLLK1, 0x21); wm8758_write(PLLK2, 0x161); wm8758_write(PLLK3, 0x26); /* set clock div */ wm8758_write(CLKCTRL, 1 | (1 << 2) | (2 << 5) | (1 << 8)); /* set srate */ wm8758_write(SRATECTRL, (0 << 1)); } void wmcodec_enable_recording(bool source_mic) { (void)source_mic; } void wmcodec_disable_recording(void) { } void wmcodec_set_recvol(int left, int right, int type) { (void)left; (void)right; (void)type; } void wmcodec_set_monitor(int enable) { (void)enable; } void wmcodec_set_equalizer_band(int band, int freq, int bw, int gain) { unsigned int eq = 0; /* Band 1..3 are peak filters */ if (band >= 1 && band <= 3) { eq |= (bw << 8); } eq |= (freq << 5); eq |= 12 - gain; if (band == 0) { wm8758_write(EQ1, eq | 0x100); /* Always apply EQ to the DAC path */ } else if (band == 1) { wm8758_write(EQ2, eq); } else if (band == 2) { wm8758_write(EQ3, eq); } else if (band == 3) { wm8758_write(EQ4, eq); } else if (band == 4) { wm8758_write(EQ5, eq); } }