/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Driver for WM8731L audio codec * * Based on code from the ipodlinux project - http://ipodlinux.org/ * Adapted for Rockbox in January 2006 * * Original file: linux/arch/armnommu/mach-ipod/audio.c * * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org) * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "lcd.h" #include "cpu.h" #include "kernel.h" #include "thread.h" #include "power.h" #include "debug.h" #include "system.h" #include "sprintf.h" #include "button.h" #include "string.h" #include "file.h" #include "buffer.h" #include "audio.h" #include "i2c-pp5002.h" #include "wm8731l.h" #include "pcf50605.h" #define IPOD_PCM_LEVEL 0x65 /* -6dB */ #define LINVOL 0x00 #define RINVOL 0x01 #define LOUTVOL 0x02 #define ROUTVOL 0x03 #define DACCTRL 0x05 #define PWRMGMT 0x06 #define AINTFCE 0x07 #define SAMPCTRL 0x08 #define ACTIVECTRL 0x09 #define RESET 0x0f void wm8731_write(int reg, int data) { ipod_i2c_send(0x1a, (reg<<1) | ((data&0x100)>>8),data&0xff); } int wmcodec_mute(int mute) { if (mute) { /* Set DACMU = 1 to soft-mute the audio DACs. */ wm8731_write(DACCTRL, 0x8); } else { /* Set DACMU = 0 to soft-un-mute the audio DACs. */ wm8731_write(DACCTRL, 0x0); } return 0; } /** From ipodLinux **/ static void codec_set_active(int active) { /* set active to 0x0 or 0x1 */ if (active) { wm8731_write(ACTIVECTRL, 0x01); } else { wm8731_write(ACTIVECTRL, 0x00); } } /* * Reset the I2S BIT.FORMAT I2S, 16bit, FIFO.FORMAT 32bit */ static void i2s_reset(void) { /* I2S device reset */ outl(inl(0xcf005030) | 0x80, 0xcf005030); outl(inl(0xcf005030) & ~0x80, 0xcf005030); /* I2S controller enable */ outl(inl(0xc0002500) | 0x1, 0xc0002500); /* BIT.FORMAT [11:10] = I2S (default) */ /* BIT.SIZE [9:8] = 24bit */ /* FIFO.FORMAT = 24 bit LSB */ /* reset DAC and ADC fifo */ outl(inl(0xc000251c) | 0x30000, 0xc000251c); } /* * Initialise the WM8975 for playback via headphone and line out. * Note, I'm using the WM8750 datasheet as its apparently close. */ int wmcodec_init(void) { /* reset I2C */ i2c_init(); /* device reset */ outl(inl(0xcf005030) | 0x80, 0xcf005030); outl(inl(0xcf005030) & ~0x80, 0xcf005030); /* device enable */ outl(inl(0xcf005000) | 0x80, 0xcf005000); /* GPIO D06 enable for output */ outl(inl(0xcf00000c) | 0x40, 0xcf00000c); outl(inl(0xcf00001c) & ~0x40, 0xcf00001c); /* bits 11,10 == 01 */ outl(inl(0xcf004040) | 0x400, 0xcf004040); outl(inl(0xcf004040) & ~0x800, 0xcf004040); outl(inl(0xcf004048) & ~0x1, 0xcf004048); outl(inl(0xcf000004) & ~0xf, 0xcf000004); outl(inl(0xcf004044) & ~0xf, 0xcf004044); /* C03 = 0 */ outl(inl(0xcf000008) | 0x8, 0xcf000008); outl(inl(0xcf000018) | 0x8, 0xcf000018); outl(inl(0xcf000028) & ~0x8, 0xcf000028); return 0; } /* Silently enable / disable audio output */ void wmcodec_enable_output(bool enable) { if (enable) { /* reset the I2S controller into known state */ i2s_reset(); wm8731_write(RESET, 0x0); /*Reset*/ codec_set_active(0x0); /* DACSEL=1 */ /* BYPASS=1 */ wm8731_write(0x4, 0x18); /* set power register to POWEROFF=0 on OUTPD=0, DACPD=0 */ wm8731_write(PWRMGMT, 0x67); /* BCLKINV=0(Dont invert BCLK) MS=1(Enable Master) LRSWAP=0 LRP=0 */ /* IWL=00(16 bit) FORMAT=10(I2S format) */ wm8731_write(AINTFCE, 0x42); wmcodec_set_sample_rate(WM8731L_44100HZ); /* set the volume to -6dB */ wm8731_write(LOUTVOL, IPOD_PCM_LEVEL); wm8731_write(ROUTVOL, 0x100 | IPOD_PCM_LEVEL); /* ACTIVE=1 */ codec_set_active(1); /* 5. Set DACMU = 0 to soft-un-mute the audio DACs. */ wm8731_write(DACCTRL, 0x0); wmcodec_mute(0); } else { wmcodec_mute(1); } } int wmcodec_set_master_vol(int vol_l, int vol_r) { /* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */ /* 1111111 == +6dB */ /* 1111001 == 0dB */ /* 0110000 == -73dB */ /* 0101111 == mute (0x2f) */ wm8731_write(LOUTVOL, vol_l); wm8731_write(ROUTVOL, vol_r); return 0; } int wmcodec_set_mixer_vol(int channel1, int channel2) { (void)channel1; (void)channel2; return 0; } void wmcodec_set_bass(int value) { (void)value; } void wmcodec_set_treble(int value) { (void)value; } /* Nice shutdown of WM8731 codec */ void wmcodec_close(void) { /* set DACMU=1 DEEMPH=0 */ wm8731_write(DACCTRL, 0x8); /* ACTIVE=0 */ codec_set_active(0x0); /* line in mute left & right*/ wm8731_write(LINVOL, 0x100 | 0x80); /* set DACSEL=0, MUTEMIC=1 */ wm8731_write(0x4, 0x2); /* set POWEROFF=0 OUTPD=0 DACPD=1 */ wm8731_write(PWRMGMT, 0x6f); /* set POWEROFF=1 OUTPD=1 DACPD=1 */ wm8731_write(PWRMGMT, 0xff); } /* Change the order of the noise shaper, 5th order is recommended above 32kHz */ void wmcodec_set_nsorder(int order) { (void)order; } void wmcodec_set_sample_rate(int sampling_control) { codec_set_active(0x0); wm8731_write(SAMPCTRL, sampling_control); codec_set_active(0x1); } void wmcodec_enable_recording(bool source_mic) { (void)source_mic; } void wmcodec_disable_recording(void) { } void wmcodec_set_recvol(int left, int right, int type) { (void)left; (void)right; (void)type; } void wmcodec_set_monitor(int enable) { (void)enable; }